From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, mlord@pobox.com, albertcc@tw.ibm.com,
alan@lxorguk.ukuu.org.uk, axboe@suse.de, forrest.zhao@intel.com,
linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 12/12] libata-hp-prep: implement followup softreset handling
Date: Wed, 31 May 2006 20:05:42 +0900 [thread overview]
Message-ID: <1149073542274-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <1149073540186-git-send-email-htejun@gmail.com>
In some cases, hardreset must be followed by SRST.
* some controllers can't classify with hardreset
* some controllers can't wait for !BSY after hardreset (LLDD should
explicitly request followup softreset by returning -EAGAIN)
* (later) PM needs SRST w/ PMP==15 to operate after hardreset
To handle above cases, this patch implements follow-up softreset.
After a hardreset, ata_eh_reset() checks whether any of above
conditions are met and do a follow-up softreset if necessary.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-eh.c | 58 +++++++++++++++++++++++++++++++++++++++++-----
1 files changed, 52 insertions(+), 6 deletions(-)
664faf09a05d74085c0b31e2c621d7647322325b
diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c
index 0e66f14..8ecb842 100644
--- a/drivers/scsi/libata-eh.c
+++ b/drivers/scsi/libata-eh.c
@@ -1318,16 +1318,28 @@ static void ata_eh_report(struct ata_por
}
}
-static int ata_eh_reset(struct ata_port *ap,
+static int ata_eh_followup_srst_needed(int rc, int classify,
+ const unsigned int *classes)
+{
+ if (rc == -EAGAIN)
+ return 1;
+ if (rc != 0)
+ return 0;
+ if (classify && classes[0] == ATA_DEV_UNKNOWN)
+ return 1;
+ return 0;
+}
+
+static int ata_eh_reset(struct ata_port *ap, int classify,
ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
{
struct ata_eh_context *ehc = &ap->eh_context;
- unsigned int classes[ATA_MAX_DEVICES];
+ unsigned int *classes = ehc->classes;
int tries = ATA_EH_RESET_TRIES;
unsigned int action;
ata_reset_fn_t reset;
- int i, rc;
+ int i, did_followup_srst, rc;
/* Determine which reset to use and record in ehc->i.action.
* prereset() may examine and modify it.
@@ -1381,10 +1393,44 @@ static int ata_eh_reset(struct ata_port
rc = ata_do_reset(ap, reset, classes);
+ did_followup_srst = 0;
+ if (reset == hardreset &&
+ ata_eh_followup_srst_needed(rc, classify, classes)) {
+ /* okay, let's do follow-up softreset */
+ did_followup_srst = 1;
+ reset = softreset;
+
+ if (!reset) {
+ ata_port_printk(ap, KERN_ERR,
+ "follow-up softreset required "
+ "but no softreset avaliable\n");
+ return -EINVAL;
+ }
+
+ ata_eh_about_to_do(ap, ATA_EH_RESET_MASK);
+ rc = ata_do_reset(ap, reset, classes);
+
+ if (rc == 0 && classify &&
+ classes[0] == ATA_DEV_UNKNOWN) {
+ ata_port_printk(ap, KERN_ERR,
+ "classification failed\n");
+ return -EINVAL;
+ }
+ }
+
if (rc && --tries) {
+ const char *type;
+
+ if (reset == softreset) {
+ if (did_followup_srst)
+ type = "follow-up soft";
+ else
+ type = "soft";
+ } else
+ type = "hard";
+
ata_port_printk(ap, KERN_WARNING,
- "%sreset failed, retrying in 5 secs\n",
- reset == softreset ? "soft" : "hard");
+ "%sreset failed, retrying in 5 secs\n", type);
ssleep(5);
if (reset == hardreset)
@@ -1508,7 +1554,7 @@ static int ata_eh_recover(struct ata_por
if (ehc->i.action & ATA_EH_RESET_MASK) {
ata_eh_freeze_port(ap);
- rc = ata_eh_reset(ap, prereset, softreset, hardreset,
+ rc = ata_eh_reset(ap, 0, prereset, softreset, hardreset,
postreset);
if (rc) {
ata_port_printk(ap, KERN_ERR,
--
1.3.2
next prev parent reply other threads:[~2006-05-31 11:05 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-31 11:05 [PATCHSET 01/03] prep for hotplug support, take 5 Tejun Heo
2006-05-31 11:05 ` [PATCH 01/12] libata-hp-prep: add flags and eh_info/context fields for hotplug Tejun Heo
2006-05-31 11:05 ` [PATCH 02/12] libata-hp-prep: implement ata_dev_init() Tejun Heo
2006-05-31 11:05 ` [PATCH 05/12] libata-hp-prep: use __ata_scsi_find_dev() Tejun Heo
2006-05-31 11:05 ` [PATCH 03/12] libata-hp-prep: make some ata_device fields persistent Tejun Heo
2006-05-31 11:05 ` [PATCH 06/12] libata-hp-prep: implement ap->hw_sata_spd_limit Tejun Heo
2006-05-31 11:05 ` [PATCH 04/12] libata-hp-prep: update ata_scsi_find_dev() and friends Tejun Heo
2006-05-31 11:05 ` [PATCH 08/12] libata-hp-prep: add ata_aux_wq Tejun Heo
2006-05-31 11:05 ` [PATCH 09/12] libata-hp-prep: make probing related functions global Tejun Heo
2006-05-31 11:05 ` [PATCH 11/12] libata-hp-prep: add prereset() method and implement ata_std_prereset() Tejun Heo
2006-05-31 11:05 ` [PATCH 07/12] libata-hp-prep: store attached SCSI device Tejun Heo
2006-05-31 11:05 ` Tejun Heo [this message]
2006-05-31 11:05 ` [PATCH 10/12] libata-hp-prep: implement sata_phy_debounce() Tejun Heo
2006-05-31 11:08 ` [PATCHSET 01/03] prep for hotplug support, take 5 Tejun Heo
2006-06-08 20:52 ` Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2006-05-29 6:25 [PATCHSET 01/03] prep for hotplug support, take 4 Tejun Heo
2006-05-29 6:25 ` [PATCH 12/12] libata-hp-prep: implement followup softreset handling Tejun Heo
2006-05-30 4:12 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1149073542274-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=albertcc@tw.ibm.com \
--cc=axboe@suse.de \
--cc=forrest.zhao@intel.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=mlord@pobox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).