[PATCH 03/10] libata: move ata_do_simple_cmd() right below ata_exec_internal()

[Tejun Heo <htejun@gmail.com>]

Move ata_do_simple_cmd() right below ata_exec_internal().

Signed-off-by: Tejun Heo <htejun@gmail.com>

---

 drivers/scsi/libata-core.c |   46 ++++++++++++++++++++++----------------------
 1 files changed, 23 insertions(+), 23 deletions(-)

0b531e7f20027038fe1fb44e301fe0e4e88abbb8
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index d9fdbbd..4fc8759 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1123,6 +1123,29 @@ unsigned ata_exec_internal(struct ata_de
 	return err_mask;
 }
 
+/*
+ * Execute a 'simple' command, that only consists of the opcode 'cmd' itself,
+ * without filling any other registers
+ */
+static int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
+{
+	struct ata_taskfile tf;
+	int err;
+
+	ata_tf_init(dev, &tf);
+
+	tf.command = cmd;
+	tf.flags |= ATA_TFLAG_DEVICE;
+	tf.protocol = ATA_PROT_NODATA;
+
+	err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+	if (err)
+		ata_dev_printk(dev, KERN_ERR, "%s: ata command failed: %d\n",
+			       __FUNCTION__, err);
+
+	return err;
+}
+
 /**
  *	ata_pio_need_iordy	-	check if iordy needed
  *	@adev: ATA device
@@ -4924,29 +4947,6 @@ int ata_port_offline(struct ata_port *ap
 	return 0;
 }
 
-/*
- * Execute a 'simple' command, that only consists of the opcode 'cmd' itself,
- * without filling any other registers
- */
-static int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
-{
-	struct ata_taskfile tf;
-	int err;
-
-	ata_tf_init(dev, &tf);
-
-	tf.command = cmd;
-	tf.flags |= ATA_TFLAG_DEVICE;
-	tf.protocol = ATA_PROT_NODATA;
-
-	err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
-	if (err)
-		ata_dev_printk(dev, KERN_ERR, "%s: ata command failed: %d\n",
-			       __FUNCTION__, err);
-
-	return err;
-}
-
 /**
  *	ata_port_start - Set port up for dma.
  *	@ap: Port to initialize
-- 
1.3.2