From: Tejun Heo <htejun@gmail.com>
To: jgarzik@pobox.com, alan@lxorguk.ukuu.org.ukjgarzik@pobox.com,
akpm@osdl.org, davej@redhat.com, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 08/11] libata: implement dummy port
Date: Wed, 2 Aug 2006 05:11:50 +0900 [thread overview]
Message-ID: <11544631101693-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11544631081793-git-send-email-htejun@gmail.com>
Implement dummy port which can be requested by setting appropriate bit
in probe_ent->dummy_port_mask. The dummy port is used as placeholder
for stolen legacy port. This allows libata to guarantee that
index_of(ap) == ap->port_no == actual_device_port_no, and thus to
remove error-prone ap->hard_port_no.
As it's used only when one port of a legacy controller is reserved by
some other entity (e.g. IDE), the focus is on keeping the added *code*
complexity at minimum, so dummy port allocates all libata core
resources and acts as a normal port. It just has all dummy port_ops.
This patch only implements dummy port. The following patch will make
libata use it for stolen legacy ports.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/scsi/libata-core.c | 61 +++++++++++++++++++++++++++++++++++++-------
include/linux/libata.h | 3 ++
2 files changed, 54 insertions(+), 10 deletions(-)
d9efe31ff5eda88172278153c15a8fd5d0f94ec5
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index fe23738..fffb38a 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -5311,7 +5311,6 @@ static struct ata_port * ata_port_add(co
{
struct Scsi_Host *host;
struct ata_port *ap;
- int rc;
DPRINTK("ENTER\n");
@@ -5332,15 +5331,7 @@ static struct ata_port * ata_port_add(co
ata_port_init(ap, host, host_set, ent, port_no);
- rc = ap->ops->port_start(ap);
- if (rc)
- goto err_out;
-
return ap;
-
-err_out:
- scsi_host_put(host);
- return NULL;
}
/**
@@ -5395,11 +5386,27 @@ int ata_device_add(const struct ata_prob
if (!ap)
goto err_out;
+ host_set->ports[i] = ap;
+
+ /* dummy? */
+ if (ent->dummy_port_mask & (1 << i)) {
+ ata_port_printk(ap, KERN_INFO, "DUMMY\n");
+ ap->ops = &ata_dummy_port_ops;
+ continue;
+ }
+
+ /* start port */
+ rc = ap->ops->port_start(ap);
+ if (rc) {
+ host_set->ports[i] = NULL;
+ scsi_host_put(ap->host);
+ goto err_out;
+ }
+
/* Report the secondary IRQ for second channel legacy */
if (i == 1 && ent->irq2)
irq_line = ent->irq2;
- host_set->ports[i] = ap;
xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) |
(ap->mwdma_mask << ATA_SHIFT_MWDMA) |
(ap->pio_mask << ATA_SHIFT_PIO);
@@ -5895,6 +5902,39 @@ u32 ata_wait_register(void __iomem *reg,
}
/*
+ * Dummy port_ops
+ */
+static void ata_dummy_noret(struct ata_port *ap) { }
+static int ata_dummy_ret0(struct ata_port *ap) { return 0; }
+static void ata_dummy_qc_noret(struct ata_queued_cmd *qc) { }
+
+static u8 ata_dummy_check_status(struct ata_port *ap)
+{
+ return ATA_DRDY;
+}
+
+static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
+{
+ return AC_ERR_SYSTEM;
+}
+
+const struct ata_port_operations ata_dummy_port_ops = {
+ .port_disable = ata_port_disable,
+ .check_status = ata_dummy_check_status,
+ .check_altstatus = ata_dummy_check_status,
+ .dev_select = ata_noop_dev_select,
+ .qc_prep = ata_noop_qc_prep,
+ .qc_issue = ata_dummy_qc_issue,
+ .freeze = ata_dummy_noret,
+ .thaw = ata_dummy_noret,
+ .error_handler = ata_dummy_noret,
+ .post_internal_cmd = ata_dummy_qc_noret,
+ .irq_clear = ata_dummy_noret,
+ .port_start = ata_dummy_ret0,
+ .port_stop = ata_dummy_noret,
+};
+
+/*
* libata is essentially a library of internal helper functions for
* low-level ATA host controller drivers. As such, the API/ABI is
* likely to change as new drivers are added and updated.
@@ -5904,6 +5944,7 @@ u32 ata_wait_register(void __iomem *reg,
EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
EXPORT_SYMBOL_GPL(sata_deb_timing_long);
+EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
EXPORT_SYMBOL_GPL(ata_std_bios_param);
EXPORT_SYMBOL_GPL(ata_std_ports);
EXPORT_SYMBOL_GPL(ata_device_add);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 9a94778..10c5587 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -353,6 +353,7 @@ struct ata_probe_ent {
struct ata_ioports port[ATA_MAX_PORTS];
unsigned int n_ports;
unsigned int hard_port_no;
+ unsigned int dummy_port_mask;
unsigned int pio_mask;
unsigned int mwdma_mask;
unsigned int udma_mask;
@@ -652,6 +653,8 @@ extern const unsigned long sata_deb_timi
extern const unsigned long sata_deb_timing_hotplug[];
extern const unsigned long sata_deb_timing_long[];
+extern const struct ata_port_operations ata_dummy_port_ops;
+
static inline const unsigned long *
sata_ehc_deb_timing(struct ata_eh_context *ehc)
{
--
1.3.2
next prev parent reply other threads:[~2006-08-01 20:12 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-01 20:11 [PATCHSET] libata: improve initialization and legacy handling Tejun Heo
2006-08-01 20:11 ` [PATCH 05/11] libata: fix ata_device_add() error path Tejun Heo
2006-08-01 20:11 ` [PATCH 04/11] [libata] Kill 'count' var in ata_device_add() Tejun Heo
2006-08-01 20:11 ` [PATCH 02/11] [libata] some function renaming Tejun Heo
2006-08-01 20:11 ` [PATCH 03/11] [libata] manually inline ata_host_remove() Tejun Heo
2006-08-01 20:11 ` [PATCH 01/11] ata_piix: fix host_set private_data intialization Tejun Heo
2006-08-01 20:11 ` [PATCH 07/11] libata: fix several bugs in reworked legacy handling Tejun Heo
2006-08-01 20:11 ` Tejun Heo [this message]
2006-08-01 20:11 ` [PATCH 06/11] libata: rework legacy handling to remove much of the cruft Tejun Heo
2006-08-01 20:11 ` [PATCH 11/11] libata: kill unused hard_port_no and legacy_mode Tejun Heo
2006-08-01 20:11 ` [PATCH 10/11] libata: replace ap->hard_port_no with ap->port_no Tejun Heo
2006-08-01 20:11 ` [PATCH 09/11] libata: use dummy port for stolen legacy ports Tejun Heo
2006-08-01 21:57 ` [PATCHSET] libata: improve initialization and legacy handling Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11544631101693-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.ukjgarzik \
--cc=jgarzik@pobox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).