From: Aalderd Bouwman <aalderd.boac@wanadoo.nl>
To: Tejun Heo <htejun@gmail.com>
Cc: jgarzik@pobox.com, linux-ide@vger.kernel.org
Subject: Re: [PATCHSET] ahci updates regarding vt8251 support
Date: Sat, 14 Oct 2006 18:49:46 +0200 [thread overview]
Message-ID: <1160844586.3040.6.camel@anja> (raw)
In-Reply-To: <11607058883329-git-send-email-htejun@gmail.com>
Tejun,
The result of my test:
Loading the driver at boot:
ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA
mode
ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xE0006D00 ctl 0x0 bmdma 0x0 irq 10
ata2: SATA max UDMA/133 cmd 0xE0006D80 ctl 0x0 bmdma 0x0 irq 10
ata3: SATA max UDMA/133 cmd 0xE0006E00 ctl 0x0 bmdma 0x0 irq 10
ata4: SATA max UDMA/133 cmd 0xE0006E80 ctl 0x0 bmdma 0x0 irq 10
scsi0 : ahci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link down (SStatus 0 SControl 300)
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA ST3808110AS 3.AA PQ: 0
ANSI: 5
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Turning my drive on/mount/umount/off:
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0x2 frozen
ata2: (irq_stat 0x00000040, connection status changed)
ata2: waiting for device to spin up (8 secs)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7, max UDMA/133, 160086528 sectors: LBA
ata2.00: ata2: dev 0 multi count 0
ata2.00: configured for UDMA/133
ata2: EH complete
scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0
ANSI: 5
SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
ReiserFS: sdb1: using ordered data mode
ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sdb1: checking transaction log (sdb1)
ReiserFS: sdb1: Using r5 hash to sort names
ata2: exception Emask 0x10 SAct 0x0 SErr 0x30000 action 0x2 frozen
ata2: (irq_stat 0x04400000, PHY RDY changed)
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 300)
ata2: failed to recover some devices, retrying in 5 secs
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 300)
ata2: failed to recover some devices, retrying in 5 secs
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 300)
ata2.00: disabled
ata2: EH complete
ata2.00: detaching (SCSI 1:0:0:0)
Synchronizing SCSI cache for disk sdb:
FAILED
status = 0, message = 00, host = 4, driver = 00
<3>ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0x2
frozen
ata2: (irq_stat 0x00000040, connection status changed)
ata2: waiting for device to spin up (8 secs)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7, max UDMA/133, 160086528 sectors: LBA
ata2.00: ata2: dev 0 multi count 0
ata2.00: configured for UDMA/133
ata2: EH complete
scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0
ANSI: 5
SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
ReiserFS: sdb1: using ordered data mode
ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sdb1: checking transaction log (sdb1)
ReiserFS: sdb1: Using r5 hash to sort names
ata2: exception Emask 0x10 SAct 0x0 SErr 0x30000 action 0x2 frozen
ata2: (irq_stat 0x04400000, PHY RDY changed)
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 300)
ata2: failed to recover some devices, retrying in 5 secs
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 300)
ata2: failed to recover some devices, retrying in 5 secs
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 300)
ata2.00: disabled
ata2: EH complete
ata2.00: detaching (SCSI 1:0:0:0)
Synchronizing SCSI cache for disk sdb:
FAILED
status = 0, message = 00, host = 4, driver = 00
As you see it works!!
Only you found FAILED by synchronizing the SCSI cache for disk sdb.
Is that a problem or did I forget anything?
Tejun: Did you also make NCQ working?
Aalderd.
On Fri, 2006-10-13 at 11:18 +0900, Tejun Heo wrote:
> Hello,
>
> This patchset updates libata and ahci to improve vt8251 EH and hotplug
> support.
>
> #01 : separate out sata_port_hardreset(), to be used by vt8251 reset
> #02 : update CLO handling in softreset and kill RESET_NEEDS_CLO
> #03 : update vt8251 support in ahci
>
> This patchset is against the current #upstream
> (da54f5fe54c7d75e2db7d17961fb36a8c28a8501).
>
> Aalderd, can you test this patchset?
>
> Thanks.
>
> --
> tejun
>
>
>
next prev parent reply other threads:[~2006-10-14 16:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-13 2:18 [PATCHSET] ahci updates regarding vt8251 support Tejun Heo
2006-10-13 2:18 ` [PATCH 3/3] ahci: update ahci-vt8251 reset sequence Tejun Heo
2006-10-13 2:18 ` [PATCH 1/3] libata: separate out and export sata_port_hardreset() Tejun Heo
2006-10-13 2:18 ` [PATCH 2/3] ahci: update softreset and kill AHCI_FLAG_RESET_NEEDS_CLO Tejun Heo
2006-10-14 16:49 ` Aalderd Bouwman [this message]
2006-10-15 5:47 ` [PATCHSET] ahci updates regarding vt8251 support Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1160844586.3040.6.camel@anja \
--to=aalderd.boac@wanadoo.nl \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).