[PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts

[PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts

[Tejun Heo]

This patch adds hp-poll support to the following drivers.

* sata_nv (generic)
* sata_sis
* sata_svw
* sata_uli
* sata_via
* sata_vsc

All the above drivers currently don't support hotplug interrupts (H/W
restrictions or lack of doc/effort) and all hotplug operations should
be done via hp-poll; thus, ATA_FLAG_HP_POLLING is set for these
drivers.

Signed-off-by: Tejun Heo <htejun@gmail.com>

---

 drivers/scsi/sata_nv.c  |    5 ++++-
 drivers/scsi/sata_sis.c |    5 ++++-
 drivers/scsi/sata_svw.c |    4 +++-
 drivers/scsi/sata_uli.c |    6 +++++-
 drivers/scsi/sata_via.c |    9 +++++++--
 drivers/scsi/sata_vsc.c |    4 +++-
 6 files changed, 26 insertions(+), 7 deletions(-)

38dc5ac2f958a42537f07b763b1a9478602f2af0
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index 79b0550..01f25f6 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -190,6 +190,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.data_xfer		= ata_pio_data_xfer,
 	.irq_handler		= nv_generic_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -262,7 +264,8 @@ static struct ata_port_info nv_port_info
 	/* generic */
 	{
 		.sht		= &nv_sht,
-		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_HP_POLLING,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index 809d337..24df9ee 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -118,6 +118,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= sis_scr_read,
@@ -129,7 +131,8 @@ static const struct ata_port_operations 
 
 static struct ata_port_info sis_port_info = {
 	.sht		= &sis_sht,
-	.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+			  ATA_FLAG_HP_POLLING,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x7,
 	.udma_mask	= 0x7f,
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 7566c2c..769ba92 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -325,6 +325,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= k2_sata_scr_read,
@@ -425,7 +427,7 @@ static int k2_sata_init_one (struct pci_
 
 	probe_ent->sht = &k2_sata_sht;
 	probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO;
+				ATA_FLAG_MMIO | ATA_FLAG_HP_POLLING;
 	probe_ent->port_ops = &k2_sata_ops;
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index 64f3c1a..e7bbd80 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -116,6 +116,9 @@ static const struct ata_port_operations 
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
+
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 
@@ -129,7 +132,8 @@ static const struct ata_port_operations 
 
 static struct ata_port_info uli_port_info = {
 	.sht            = &uli_sht,
-	.host_flags     = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.host_flags     = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+			  ATA_FLAG_HP_POLLING,
 	.pio_mask       = 0x1f,		/* pio0-4 */
 	.udma_mask      = 0x7f,		/* udma0-6 */
 	.port_ops       = &uli_ops,
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 67c3d29..a00cc71 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -130,6 +130,9 @@ static const struct ata_port_operations 
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll_hostset_excl,
+
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 
@@ -143,7 +146,8 @@ static const struct ata_port_operations 
 
 static struct ata_port_info svia_port_info = {
 	.sht		= &svia_sht,
-	.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+			  ATA_FLAG_HP_POLLING,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x07,
 	.udma_mask	= 0x7f,
@@ -238,7 +242,8 @@ static struct ata_probe_ent *vt6421_init
 	INIT_LIST_HEAD(&probe_ent->node);
 
 	probe_ent->sht		= &svia_sht;
-	probe_ent->host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY;
+	probe_ent->host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_HP_POLLING;
 	probe_ent->port_ops	= &svia_sata_ops;
 	probe_ent->n_ports	= N_PORTS;
 	probe_ent->irq		= pdev->irq;
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 616fd96..b00df9a 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -302,6 +302,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= vsc_sata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= vsc_sata_scr_read,
@@ -396,7 +398,7 @@ static int __devinit vsc_sata_init_one (
 
 	probe_ent->sht = &vsc_sata_sht;
 	probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO;
+				ATA_FLAG_MMIO | ATA_FLAG_HP_POLLING;
 	probe_ent->port_ops = &vsc_sata_ops;
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;
-- 
1.3.2

[PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts

[Tejun Heo]

This patch adds hp-poll support to the following drivers.

* sata_nv (generic)
* sata_sis
* sata_svw
* sata_uli
* sata_via
* sata_vsc

All the above drivers currently don't support hotplug interrupts (H/W
restrictions or lack of doc/effort) and all hotplug operations should
be done via hp-poll; thus, ATA_FLAG_HP_POLLING is set for these
drivers.

Signed-off-by: Tejun Heo <htejun@gmail.com>

---

 drivers/scsi/sata_nv.c  |    5 ++++-
 drivers/scsi/sata_sis.c |    5 ++++-
 drivers/scsi/sata_svw.c |    4 +++-
 drivers/scsi/sata_uli.c |    6 +++++-
 drivers/scsi/sata_vsc.c |    4 +++-
 5 files changed, 19 insertions(+), 5 deletions(-)

b544ce25c0e1f5b2a5307d77942d4d6dc9d88cfe
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index 79b0550..01f25f6 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -190,6 +190,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.data_xfer		= ata_pio_data_xfer,
 	.irq_handler		= nv_generic_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -262,7 +264,8 @@ static struct ata_port_info nv_port_info
 	/* generic */
 	{
 		.sht		= &nv_sht,
-		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_HP_POLLING,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index 809d337..24df9ee 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -118,6 +118,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= sis_scr_read,
@@ -129,7 +131,8 @@ static const struct ata_port_operations 
 
 static struct ata_port_info sis_port_info = {
 	.sht		= &sis_sht,
-	.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+			  ATA_FLAG_HP_POLLING,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x7,
 	.udma_mask	= 0x7f,
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 7566c2c..769ba92 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -325,6 +325,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= k2_sata_scr_read,
@@ -425,7 +427,7 @@ static int k2_sata_init_one (struct pci_
 
 	probe_ent->sht = &k2_sata_sht;
 	probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO;
+				ATA_FLAG_MMIO | ATA_FLAG_HP_POLLING;
 	probe_ent->port_ops = &k2_sata_ops;
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index 64f3c1a..e7bbd80 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -116,6 +116,9 @@ static const struct ata_port_operations 
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
+
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 
@@ -129,7 +132,8 @@ static const struct ata_port_operations 
 
 static struct ata_port_info uli_port_info = {
 	.sht            = &uli_sht,
-	.host_flags     = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.host_flags     = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+			  ATA_FLAG_HP_POLLING,
 	.pio_mask       = 0x1f,		/* pio0-4 */
 	.udma_mask      = 0x7f,		/* udma0-6 */
 	.port_ops       = &uli_ops,
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 616fd96..b00df9a 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -302,6 +302,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= vsc_sata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= vsc_sata_scr_read,
@@ -396,7 +398,7 @@ static int __devinit vsc_sata_init_one (
 
 	probe_ent->sht = &vsc_sata_sht;
 	probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO;
+				ATA_FLAG_MMIO | ATA_FLAG_HP_POLLING;
 	probe_ent->port_ops = &vsc_sata_ops;
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;
-- 
1.3.2

[PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts

[Tejun Heo]

This patch adds hp-poll support to the following drivers.

* sata_nv (generic)
* sata_sis
* sata_svw
* sata_uli
* sata_via
* sata_vsc

All the above drivers currently don't support hotplug interrupts (H/W
restrictions or lack of doc/effort) and all hotplug operations should
be done via hp-poll; thus, ATA_FLAG_HP_POLLING is set for these
drivers.

Signed-off-by: Tejun Heo <htejun@gmail.com>

---

 drivers/scsi/sata_nv.c  |    5 ++++-
 drivers/scsi/sata_sis.c |    5 ++++-
 drivers/scsi/sata_svw.c |    4 +++-
 drivers/scsi/sata_uli.c |    6 +++++-
 drivers/scsi/sata_vsc.c |    4 +++-
 5 files changed, 19 insertions(+), 5 deletions(-)

3a5e2866b5e69d113c1a7740969b9847ed41b545
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index cdf3b65..7bd9305 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -189,6 +189,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.data_xfer		= ata_pio_data_xfer,
 	.irq_handler		= nv_generic_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -261,7 +263,8 @@ static struct ata_port_info nv_port_info
 	/* generic */
 	{
 		.sht		= &nv_sht,
-		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_HP_POLLING,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index ee6b5df..3b4bc5a 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -117,6 +117,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= sis_scr_read,
@@ -128,7 +130,8 @@ static const struct ata_port_operations 
 
 static struct ata_port_info sis_port_info = {
 	.sht		= &sis_sht,
-	.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+			  ATA_FLAG_HP_POLLING,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x7,
 	.udma_mask	= 0x7f,
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 7d08580..9a446ad 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -324,6 +324,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= k2_sata_scr_read,
@@ -424,7 +426,7 @@ static int k2_sata_init_one (struct pci_
 
 	probe_ent->sht = &k2_sata_sht;
 	probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO;
+				ATA_FLAG_MMIO | ATA_FLAG_HP_POLLING;
 	probe_ent->port_ops = &k2_sata_ops;
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index 33cdb48..d3ab9ed 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -115,6 +115,9 @@ static const struct ata_port_operations 
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
+
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 
@@ -128,7 +131,8 @@ static const struct ata_port_operations 
 
 static struct ata_port_info uli_port_info = {
 	.sht            = &uli_sht,
-	.host_flags     = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.host_flags     = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+			  ATA_FLAG_HP_POLLING,
 	.pio_mask       = 0x1f,		/* pio0-4 */
 	.udma_mask      = 0x7f,		/* udma0-6 */
 	.port_ops       = &uli_ops,
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index ad37871..d7da4c2 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -302,6 +302,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= vsc_sata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= vsc_sata_scr_read,
@@ -396,7 +398,7 @@ static int __devinit vsc_sata_init_one (
 
 	probe_ent->sht = &vsc_sata_sht;
 	probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO;
+				ATA_FLAG_MMIO | ATA_FLAG_HP_POLLING;
 	probe_ent->port_ops = &vsc_sata_ops;
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;
-- 
1.3.2

Re: [PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts

[Jeff Garzik]

ACK patches 2-3

[PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts

[Tejun Heo]

This patch adds hp-poll support to the following drivers.

* sata_nv (generic)
* sata_sil (SIL_FLAG_NO_SATA_IRQ replaced w/ ATA_FLAG_HP_POLLING)
* sata_sis
* sata_svw
* sata_uli
* sata_vsc

All the above drivers currently don't support hotplug interrupts (H/W
restrictions or lack of doc/effort) and all hotplug operations should
be done via hp-poll; thus, ATA_FLAG_HP_POLLING is set for these
drivers.

sata_via is excluded because it randomly locks up on SCR register
access.
---
 drivers/ata/sata_nv.c  |    5 ++++-
 drivers/ata/sata_sil.c |    9 ++++-----
 drivers/ata/sata_sis.c |    5 ++++-
 drivers/ata/sata_svw.c |    4 +++-
 drivers/ata/sata_uli.c |    6 +++++-
 drivers/ata/sata_vsc.c |    4 +++-
 6 files changed, 23 insertions(+), 10 deletions(-)

diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index a75d5cc..fcdae1a 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -173,6 +173,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.data_xfer		= ata_pio_data_xfer,
 	.irq_handler		= nv_generic_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -245,7 +247,8 @@ static struct ata_port_info nv_port_info
 	/* generic */
 	{
 		.sht		= &nv_sht,
-		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_HP_POLLING,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 43553db..71d9264 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -52,7 +52,6 @@ enum {
 	/*
 	 * host flags
 	 */
-	SIL_FLAG_NO_SATA_IRQ	= (1 << 28),
 	SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
 	SIL_FLAG_MOD15WRITE	= (1 << 30),
 
@@ -230,7 +229,7 @@ static const struct ata_port_info sil_po
 	{
 		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
-				  SIL_FLAG_NO_SATA_IRQ,
+				  ATA_FLAG_HP_POLLING,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= 0x3f,			/* udma0-5 */
@@ -454,8 +453,8 @@ static irqreturn_t sil_interrupt(int irq
 		if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
 			continue;
 
-		/* turn off SATA_IRQ if not supported */
-		if (ap->flags & SIL_FLAG_NO_SATA_IRQ)
+		/* ignore SATA_IRQ if not supported */
+		if (ap->flags & ATA_FLAG_HP_POLLING)
 			bmdma2 &= ~SIL_DMA_SATA_IRQ;
 
 		if (bmdma2 == 0xffffffff ||
@@ -496,7 +495,7 @@ static void sil_thaw(struct ata_port *ap
 	ata_bmdma_irq_clear(ap);
 
 	/* turn on SATA IRQ if supported */
-	if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
+	if (!(ap->flags & ATA_FLAG_HP_POLLING))
 		writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien);
 
 	/* turn on IRQ */
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 0738f52..f31ff5f 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -117,6 +117,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= sis_scr_read,
@@ -128,7 +130,8 @@ static const struct ata_port_operations 
 
 static struct ata_port_info sis_port_info = {
 	.sht		= &sis_sht,
-	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+			  ATA_FLAG_HP_POLLING,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x7,
 	.udma_mask	= 0x7f,
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 84025a2..244a698 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -324,6 +324,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= k2_sata_scr_read,
@@ -424,7 +426,7 @@ static int k2_sata_init_one (struct pci_
 
 	probe_ent->sht = &k2_sata_sht;
 	probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO;
+				ATA_FLAG_MMIO | ATA_FLAG_HP_POLLING;
 	probe_ent->port_ops = &k2_sata_ops;
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 5c603ca..6e9a8dd 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -115,6 +115,9 @@ static const struct ata_port_operations 
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
+
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 
@@ -128,7 +131,8 @@ static const struct ata_port_operations 
 
 static struct ata_port_info uli_port_info = {
 	.sht            = &uli_sht,
-	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+			  ATA_FLAG_HP_POLLING,
 	.pio_mask       = 0x1f,		/* pio0-4 */
 	.udma_mask      = 0x7f,		/* udma0-6 */
 	.port_ops       = &uli_ops,
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index e654b99..c92fb0d 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -301,6 +301,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= vsc_sata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= vsc_sata_scr_read,
@@ -395,7 +397,7 @@ static int __devinit vsc_sata_init_one (
 
 	probe_ent->sht = &vsc_sata_sht;
 	probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO;
+				ATA_FLAG_MMIO | ATA_FLAG_HP_POLLING;
 	probe_ent->port_ops = &vsc_sata_ops;
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;
-- 
1.4.2.3

[PATCHSET] hotplug polling, take 5

[Tejun Heo]

Hello, all.

This is the fifth take of hotplug polling patchset.  This take doesn't
contain any real change than rebasing over the current upstream[U].
PMP patchset will be posted soon on top of this patchset and I wanted
to avoid confusion by posting patchsets in order.

As the name implies, this patchset implements hotplug by polling.
hp-poll is used to

* Monitor ports EH gave up.  When EH gives up on a port, it freezes
  the port to protect the rest of the system from it.  The user used
  to have to issue manual scan to retry the port.  hp-poll can monitor
  such port and retry it when hotplug event is detected.  This is also
  used by PMP support.

* Support hotplug on controllers which can report hotplug conditions
  but cannot raise interrupt.

Changes from the last take[L] are.

* updated to the current upstream

This patchset is also available in the following git tree.

  http://htj.dyndns.org/git/?p=libata-tj.git;a=shortlog;h=hp-poll
  git://htj.dyndns.org/libata-tj hp-poll

Thanks.

--
tejun

[U] da54f5fe54c7d75e2db7d17961fb36a8c28a8501
[L] http://article.gmane.org/gmane.linux.ide/13418

[PATCH 1/3] libata: implement hotplug by polling

[Tejun Heo]

This patch implements hotplug by polling - hp-poll.  It is used for

* hotplug event detection on controllers which don't provide PHY
  status changed interrupt.

* hotplug event detection on disabled ports after reset failure.
  libata used to leave such ports in frozen state to protect the
  system from malfunctioning controller/device.  With hp-poll, hotplug
  events no such ports are watched safely by polling, such that
  removing/replacing the malfunctioning device triggers EH retry on
  the port.

There are three port ops for hp-poll - hp_poll_activate, hp_poll,
hp_poll_deactivate.  Only hp_poll is mandatory for hp-poll to work.
This patch also implements SATA standard polling callbacks which poll
SError.N/X bits - sata_std_hp_poll_activate() and sata_std_hp_poll().

By default, hp-poll is enabled only on disabled ports.  If a LLD
doesn't support hotplug interrupts but can poll for hotplug events, it
should indicate so by setting ATA_FLAG_HP_POLLING which tells libata
to turn on hp-poll by default.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-core.c |   79 +++++++++++++++++++++++++++++
 drivers/ata/libata-eh.c   |  123 ++++++++++++++++++++++++++++++++++++++++++++-
 drivers/ata/libata.h      |    2 +
 include/linux/libata.h    |   10 ++++
 4 files changed, 211 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c127d6f..006ab12 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2909,6 +2909,76 @@ void ata_std_postreset(struct ata_port *
 }
 
 /**
+ *	sata_std_hp_poll_activate - standard SATA hotplug polling activation
+ *	@ap: the target ata_port
+ *
+ *	Activate SATA std hotplug polling.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ */
+void sata_std_hp_poll_activate(struct ata_port *ap)
+{
+	u32 serror;
+
+	sata_scr_read(ap, SCR_ERROR, &serror);
+	serror &= SERR_PHYRDY_CHG | SERR_DEV_XCHG;
+	if (serror)
+		sata_scr_write(ap, SCR_ERROR, serror);
+
+	ap->hp_poll_data = 0;
+}
+
+/**
+ *	sata_std_hp_poll - standard SATA hotplug polling callback
+ *	@ap: the target ata_port
+ *
+ *	Poll SError.N/X for hotplug event.  Hotplug event is triggered
+ *	only after PHY stays stable for at least one full polling
+ *	interval after the first event detection.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ *
+ *	RETURNS:
+ *	1 if hotplug event has occurred, 0 otherwise.
+ */
+int sata_std_hp_poll(struct ata_port *ap)
+{
+	unsigned long state = (unsigned long)ap->hp_poll_data;
+	u32 serror;
+	int rc = 0;
+
+	sata_scr_read(ap, SCR_ERROR, &serror);
+	serror &= SERR_PHYRDY_CHG | SERR_DEV_XCHG;
+
+	switch (state) {
+	case 0:
+		if (serror) {
+			/* PHY status could be bouncing crazy due to
+			 * faulty controller or device.  Don't fire
+			 * hotplug event till hotplug event stays
+			 * quiescent for one full polling interval.
+			 */
+			sata_scr_write(ap, SCR_ERROR, serror);
+			state = 1;
+		}
+		break;
+
+	case 1:
+		if (!serror)
+			rc = 1;
+		else
+			sata_scr_write(ap, SCR_ERROR, serror);
+		break;
+	}
+
+	ap->hp_poll_data = (void *)state;
+
+	return rc;
+}
+
+/**
  *	ata_dev_same_device - Determine whether new ID matches configured device
  *	@dev: device to compare against
  *	@new_class: class of the new device
@@ -5437,6 +5507,7 @@ void ata_host_init(struct ata_host *host
 	host->dev = dev;
 	host->flags = flags;
 	host->ops = ops;
+	INIT_WORK(&host->hp_poll_task, ata_hp_poll_worker, host);
 }
 
 /**
@@ -5691,11 +5762,15 @@ void ata_port_detach(struct ata_port *ap
 
 	ata_port_wait_eh(ap);
 
-	/* Flush hotplug task.  The sequence is similar to
+	/* deactivate hotplug polling */
+	ata_hp_poll_deactivate(ap);
+
+	/* Flush hotplug tasks.  The sequence is similar to
 	 * ata_port_flush_task().
 	 */
 	flush_workqueue(ata_aux_wq);
 	cancel_delayed_work(&ap->hotplug_task);
+	cancel_delayed_work(&ap->host->hp_poll_task);
 	flush_workqueue(ata_aux_wq);
 
  skip_eh:
@@ -6129,6 +6204,8 @@ EXPORT_SYMBOL_GPL(ata_std_prereset);
 EXPORT_SYMBOL_GPL(ata_std_softreset);
 EXPORT_SYMBOL_GPL(sata_std_hardreset);
 EXPORT_SYMBOL_GPL(ata_std_postreset);
+EXPORT_SYMBOL_GPL(sata_std_hp_poll_activate);
+EXPORT_SYMBOL_GPL(sata_std_hp_poll);
 EXPORT_SYMBOL_GPL(ata_dev_revalidate);
 EXPORT_SYMBOL_GPL(ata_dev_classify);
 EXPORT_SYMBOL_GPL(ata_dev_pair);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 02b2b27..6787fbc 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -33,6 +33,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_eh.h>
@@ -44,10 +45,17 @@ #include <linux/libata.h>
 
 #include "libata.h"
 
+static unsigned long hotplug_polling_interval = 2000;
+module_param(hotplug_polling_interval, ulong, 0644);
+MODULE_PARM_DESC(hotplug_polling_interval,
+		 "Hotplug polling interval in milliseconds (default 2000)");
+
 static void __ata_port_freeze(struct ata_port *ap);
 static void ata_eh_finish(struct ata_port *ap);
 static void ata_eh_handle_port_suspend(struct ata_port *ap);
 static void ata_eh_handle_port_resume(struct ata_port *ap);
+static void ata_hp_poll_activate(struct ata_port *ap);
+
 
 static void ata_ering_record(struct ata_ering *ering, int is_io,
 			     unsigned int err_mask)
@@ -616,7 +624,10 @@ int ata_port_freeze(struct ata_port *ap)
  *	ata_eh_freeze_port - EH helper to freeze port
  *	@ap: ATA port to freeze
  *
- *	Freeze @ap.
+ *	Freeze @ap.  As the 'freeze' operation means 'shutdown event
+ *	reporting', it is a perfect place to deactivate hp-poll.  Note
+ *	that ata_port_freeze() always invokes EH and eventually this
+ *	function, so deactivating hp-poll in this function is enough.
  *
  *	LOCKING:
  *	None.
@@ -628,6 +639,8 @@ void ata_eh_freeze_port(struct ata_port 
 	if (!ap->ops->error_handler)
 		return;
 
+	ata_hp_poll_deactivate(ap);
+
 	spin_lock_irqsave(ap->lock, flags);
 	__ata_port_freeze(ap);
 	spin_unlock_irqrestore(ap->lock, flags);
@@ -637,7 +650,7 @@ void ata_eh_freeze_port(struct ata_port 
  *	ata_port_thaw_port - EH helper to thaw port
  *	@ap: ATA port to thaw
  *
- *	Thaw frozen port @ap.
+ *	Thaw frozen port @ap and activate hp-poll if necessary.
  *
  *	LOCKING:
  *	None.
@@ -658,6 +671,9 @@ void ata_eh_thaw_port(struct ata_port *a
 
 	spin_unlock_irqrestore(ap->lock, flags);
 
+	if (ap->flags & ATA_FLAG_HP_POLLING)
+		ata_hp_poll_activate(ap);
+
 	DPRINTK("ata%u port thawed\n", ap->id);
 }
 
@@ -2059,6 +2075,9 @@ static int ata_eh_recover(struct ata_por
 
  out:
 	if (rc) {
+		/* recovery failed, activate hp-poll */
+		ata_hp_poll_activate(ap);
+
 		for (i = 0; i < ATA_MAX_DEVICES; i++)
 			ata_dev_disable(&ap->device[i]);
 	}
@@ -2247,3 +2266,103 @@ static void ata_eh_handle_port_resume(st
 	}
 	spin_unlock_irqrestore(ap->lock, flags);
 }
+
+static unsigned long ata_hp_poll_delay(void)
+{
+	unsigned long interval, now;
+
+	/* Group polls to polling interval boundaries to allow cpu to
+	 * go idle as much as possible.
+	 */
+	interval = hotplug_polling_interval * HZ / 1000;
+	now = jiffies;
+	return roundup(now + 1, interval) - now;
+}
+
+/**
+ *	ata_hp_poll_activate - activate hotplug polling
+ *	@ap: host port to activate hotplug polling for
+ *
+ *	Activate hotplug probing for @ap.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ */
+static void ata_hp_poll_activate(struct ata_port *ap)
+{
+	unsigned long flags;
+
+	if (!ap->ops->hp_poll || (ap->pflags & ATA_PFLAG_HP_POLL))
+		return;
+
+	if (ap->ops->hp_poll_activate)
+		ap->ops->hp_poll_activate(ap);
+
+	queue_delayed_work(ata_aux_wq, &ap->host->hp_poll_task,
+			   ata_hp_poll_delay());
+	ap->hp_poll_data = 0;
+
+	spin_lock_irqsave(ap->lock, flags);
+	ap->pflags |= ATA_PFLAG_HP_POLL;
+	spin_unlock_irqrestore(ap->lock, flags);
+}
+
+/**
+ *	ata_hp_poll_deactivate - deactivate hotplug polling
+ *	@ap: host port to deactivate hotplug polling for
+ *
+ *	Deactivate hotplug probing for @ap.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ */
+void ata_hp_poll_deactivate(struct ata_port *ap)
+{
+	unsigned long flags;
+
+	if (!(ap->pflags & ATA_PFLAG_HP_POLL))
+		return;
+
+	spin_lock_irqsave(ap->lock, flags);
+	ap->pflags &= ~ATA_PFLAG_HP_POLL;
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	if (ap->ops->hp_poll_deactivate)
+		ap->ops->hp_poll_deactivate(ap);
+}
+
+void ata_hp_poll_worker(void *data)
+{
+	struct ata_host *host = data;
+	int i, nr_to_poll = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		int rc;
+
+		if (!(ap->pflags & ATA_PFLAG_HP_POLL))
+			continue;
+
+		/* Poll.  Positive return value indicates hotplug
+		 * event while negative indicates error condition.
+		 */
+		rc = ap->ops->hp_poll(ap);
+		if (rc) {
+			if (rc > 0) {
+				ata_ehi_hotplugged(&ap->eh_info);
+				ata_port_freeze(ap);
+			}
+			ap->pflags &= ~ATA_PFLAG_HP_POLL;
+		} else
+			nr_to_poll++;
+	}
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	if (nr_to_poll)
+		queue_delayed_work(ata_aux_wq, &host->hp_poll_task,
+				   ata_hp_poll_delay());
+}
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index a5ecb71..017dc08 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -118,5 +118,7 @@ extern enum scsi_eh_timer_return ata_scs
 extern void ata_scsi_error(struct Scsi_Host *host);
 extern void ata_port_wait_eh(struct ata_port *ap);
 extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
+extern void ata_hp_poll_worker(void *data);
+extern void ata_hp_poll_deactivate(struct ata_port *ap);
 
 #endif /* __LIBATA_H__ */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index d0a7ad5..4fc74c4 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -175,6 +175,7 @@ enum {
 	ATA_FLAG_SKIP_D2H_BSY	= (1 << 12), /* can't wait for the first D2H
 					      * Register FIS clearing BSY */
 	ATA_FLAG_DEBUGMSG	= (1 << 13),
+	ATA_FLAG_HP_POLLING	= (1 << 14), /* hotplug by polling */
 
 	/* The following flag belongs to ap->pflags but is kept in
 	 * ap->flags because it's referenced in many LLDs and will be
@@ -192,6 +193,7 @@ enum {
 	ATA_PFLAG_LOADING	= (1 << 4), /* boot/loading probe */
 	ATA_PFLAG_UNLOADING	= (1 << 5), /* module is unloading */
 	ATA_PFLAG_SCSI_HOTPLUG	= (1 << 6), /* SCSI hotplug scheduled */
+	ATA_PFLAG_HP_POLL	= (1 << 7), /* hp-poll active */
 
 	ATA_PFLAG_FLUSH_PORT_TASK = (1 << 16), /* flush port task */
 	ATA_PFLAG_SUSPENDED	= (1 << 17), /* port is suspended (power) */
@@ -401,6 +403,7 @@ struct ata_host {
 	unsigned long		flags;
 	int			simplex_claimed;	/* Keep seperate in case we
 							   ever need to do this locked */
+	struct work_struct	hp_poll_task;
 	struct ata_port		*ports[0];
 };
 
@@ -581,6 +584,7 @@ struct ata_port {
 	pm_message_t		pm_mesg;
 	int			*pm_result;
 
+	void			*hp_poll_data;
 	void			*private_data;
 
 	u8			sector_buf[ATA_SECT_SIZE]; /* owned by EH */
@@ -628,6 +632,10 @@ struct ata_port_operations {
 	void (*error_handler) (struct ata_port *ap);
 	void (*post_internal_cmd) (struct ata_queued_cmd *qc);
 
+	void (*hp_poll_activate) (struct ata_port *ap);
+	void (*hp_poll_deactivate) (struct ata_port *ap);
+	int (*hp_poll) (struct ata_port *ap);
+
 	irq_handler_t irq_handler;
 	void (*irq_clear) (struct ata_port *);
 
@@ -702,6 +710,8 @@ extern int ata_std_prereset(struct ata_p
 extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes);
 extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class);
 extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes);
+extern void sata_std_hp_poll_activate(struct ata_port *ap);
+extern int sata_std_hp_poll(struct ata_port *ap);
 extern int ata_dev_revalidate(struct ata_device *dev, int post_reset);
 extern void ata_port_disable(struct ata_port *);
 extern void ata_std_ports(struct ata_ioports *ioaddr);
-- 
1.4.2.3

[PATCH 2/3] libata: add hp-poll support to controllers with hotplug interrutps

[Tejun Heo]

This patch adds hp-poll support to the following drivers.

* ahci
* sata_nv (nf2 and c804 only)
* sata_sil
* sata_sil24

All the above controllers are capable of hotplug-by-interrupt and
hp-poll will be used only for watching disabled ports.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c       |    4 +++-
 drivers/ata/sata_nv.c    |    4 ++++
 drivers/ata/sata_sil.c   |    2 ++
 drivers/ata/sata_sil24.c |    3 +++
 4 files changed, 12 insertions(+), 1 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 2592912..d95d99b 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -262,10 +262,12 @@ static const struct ata_port_operations 
 
 	.freeze			= ahci_freeze,
 	.thaw			= ahci_thaw,
-
 	.error_handler		= ahci_error_handler,
 	.post_internal_cmd	= ahci_post_internal_cmd,
 
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
+
 	.port_suspend		= ahci_port_suspend,
 	.port_resume		= ahci_port_resume,
 
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 323b607..a75d5cc 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -200,6 +200,8 @@ static const struct ata_port_operations 
 	.thaw			= nv_nf2_thaw,
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.data_xfer		= ata_pio_data_xfer,
 	.irq_handler		= nv_nf2_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -227,6 +229,8 @@ static const struct ata_port_operations 
 	.thaw			= nv_ck804_thaw,
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.data_xfer		= ata_pio_data_xfer,
 	.irq_handler		= nv_ck804_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index ca8d993..5c8a349 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -205,6 +205,8 @@ static const struct ata_port_operations 
 	.thaw			= sil_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= sil_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= sil_scr_read,
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 169e200..c84efc3 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -410,6 +410,9 @@ static const struct ata_port_operations 
 	.error_handler		= sil24_error_handler,
 	.post_internal_cmd	= sil24_post_internal_cmd,
 
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
+
 	.port_start		= sil24_port_start,
 	.port_stop		= sil24_port_stop,
 	.host_stop		= sil24_host_stop,
-- 
1.4.2.3

[PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts

[Tejun Heo]

This patch adds hp-poll support to the following drivers.

* sata_nv (generic)
* sata_sil (SIL_FLAG_NO_SATA_IRQ replaced w/ ATA_FLAG_HP_POLLING)
* sata_sis
* sata_svw
* sata_uli
* sata_vsc

All the above drivers currently don't support hotplug interrupts (H/W
restrictions or lack of doc/effort) and all hotplug operations should
be done via hp-poll; thus, ATA_FLAG_HP_POLLING is set for these
drivers.

sata_via is excluded because it randomly locks up on SCR register
access.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/sata_nv.c  |    5 ++++-
 drivers/ata/sata_sil.c |    9 ++++-----
 drivers/ata/sata_sis.c |    5 ++++-
 drivers/ata/sata_svw.c |    4 +++-
 drivers/ata/sata_uli.c |    6 +++++-
 drivers/ata/sata_vsc.c |    4 +++-
 6 files changed, 23 insertions(+), 10 deletions(-)

diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index a75d5cc..fcdae1a 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -173,6 +173,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.data_xfer		= ata_pio_data_xfer,
 	.irq_handler		= nv_generic_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -245,7 +247,8 @@ static struct ata_port_info nv_port_info
 	/* generic */
 	{
 		.sht		= &nv_sht,
-		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_HP_POLLING,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 5c8a349..1b2e36a 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -52,7 +52,6 @@ enum {
 	/*
 	 * host flags
 	 */
-	SIL_FLAG_NO_SATA_IRQ	= (1 << 28),
 	SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
 	SIL_FLAG_MOD15WRITE	= (1 << 30),
 
@@ -230,7 +229,7 @@ static const struct ata_port_info sil_po
 	{
 		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
-				  SIL_FLAG_NO_SATA_IRQ,
+				  ATA_FLAG_HP_POLLING,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= 0x3f,			/* udma0-5 */
@@ -454,8 +453,8 @@ static irqreturn_t sil_interrupt(int irq
 		if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
 			continue;
 
-		/* turn off SATA_IRQ if not supported */
-		if (ap->flags & SIL_FLAG_NO_SATA_IRQ)
+		/* ignore SATA_IRQ if not supported */
+		if (ap->flags & ATA_FLAG_HP_POLLING)
 			bmdma2 &= ~SIL_DMA_SATA_IRQ;
 
 		if (bmdma2 == 0xffffffff ||
@@ -496,7 +495,7 @@ static void sil_thaw(struct ata_port *ap
 	ata_bmdma_irq_clear(ap);
 
 	/* turn on SATA IRQ if supported */
-	if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
+	if (!(ap->flags & ATA_FLAG_HP_POLLING))
 		writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien);
 
 	/* turn on IRQ */
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 0738f52..f31ff5f 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -117,6 +117,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= sis_scr_read,
@@ -128,7 +130,8 @@ static const struct ata_port_operations 
 
 static struct ata_port_info sis_port_info = {
 	.sht		= &sis_sht,
-	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+			  ATA_FLAG_HP_POLLING,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x7,
 	.udma_mask	= 0x7f,
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index db32d15..301e42c 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -324,6 +324,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= k2_sata_scr_read,
@@ -424,7 +426,7 @@ static int k2_sata_init_one (struct pci_
 
 	probe_ent->sht = &k2_sata_sht;
 	probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO;
+				ATA_FLAG_MMIO | ATA_FLAG_HP_POLLING;
 	probe_ent->port_ops = &k2_sata_ops;
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 5c603ca..6e9a8dd 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -115,6 +115,9 @@ static const struct ata_port_operations 
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
+
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 
@@ -128,7 +131,8 @@ static const struct ata_port_operations 
 
 static struct ata_port_info uli_port_info = {
 	.sht            = &uli_sht,
-	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+			  ATA_FLAG_HP_POLLING,
 	.pio_mask       = 0x1f,		/* pio0-4 */
 	.udma_mask      = 0x7f,		/* udma0-6 */
 	.port_ops       = &uli_ops,
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index e654b99..c92fb0d 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -301,6 +301,8 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.irq_handler		= vsc_sata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= vsc_sata_scr_read,
@@ -395,7 +397,7 @@ static int __devinit vsc_sata_init_one (
 
 	probe_ent->sht = &vsc_sata_sht;
 	probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO;
+				ATA_FLAG_MMIO | ATA_FLAG_HP_POLLING;
 	probe_ent->port_ops = &vsc_sata_ops;
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;
-- 
1.4.2.3

Re: [PATCHSET] hotplug polling, take 5

[Jeff Garzik]

Tejun Heo wrote:
> Hello, all.
> 
> This is the fifth take of hotplug polling patchset.  This take doesn't
> contain any real change than rebasing over the current upstream[U].
> PMP patchset will be posted soon on top of this patchset and I wanted
> to avoid confusion by posting patchsets in order.
> 
> As the name implies, this patchset implements hotplug by polling.
> hp-poll is used to
> 
> * Monitor ports EH gave up.  When EH gives up on a port, it freezes
>   the port to protect the rest of the system from it.  The user used
>   to have to issue manual scan to retry the port.  hp-poll can monitor
>   such port and retry it when hotplug event is detected.  This is also
>   used by PMP support.
> 
> * Support hotplug on controllers which can report hotplug conditions
>   but cannot raise interrupt.

Patchset seems sane.  I'll need to re-read patch #1 in depth, but I give 
everything a tentative ACK for now.

My biggest concern is power usage.  On laptops for example, the 99% 
common case is that the user will never hot[un]plug a drive, so we 
shouldn't waste power bothering with poking disabled ports.

	Jeff

Re: [PATCHSET] hotplug polling, take 5

[Tejun Heo]

Jeff Garzik wrote:
> Tejun Heo wrote:
>> Hello, all.
>>
>> This is the fifth take of hotplug polling patchset.  This take doesn't
>> contain any real change than rebasing over the current upstream[U].
>> PMP patchset will be posted soon on top of this patchset and I wanted
>> to avoid confusion by posting patchsets in order.
>>
>> As the name implies, this patchset implements hotplug by polling.
>> hp-poll is used to
>>
>> * Monitor ports EH gave up.  When EH gives up on a port, it freezes
>>   the port to protect the rest of the system from it.  The user used
>>   to have to issue manual scan to retry the port.  hp-poll can monitor
>>   such port and retry it when hotplug event is detected.  This is also
>>   used by PMP support.
>>
>> * Support hotplug on controllers which can report hotplug conditions
>>   but cannot raise interrupt.
> 
> Patchset seems sane.  I'll need to re-read patch #1 in depth, but I give 
> everything a tentative ACK for now.
> 
> My biggest concern is power usage.  On laptops for example, the 99% 
> common case is that the user will never hot[un]plug a drive, so we 
> shouldn't waste power bothering with poking disabled ports.

Link powersave patchset should handle that together but I'm still not 
sure what to do w/ user interface (which sysfs node to use).  Also, 
controllers which are used on laptops && use hp-poll by default are 
sata_nv (old ones) and some variant of sata_sil used in ati chipset. 
So, it shouldn't cause trouble for most laptop users.

-- 
tejun

Re: [PATCHSET] hotplug polling, take 5

[Jeff Garzik]

Tejun Heo wrote:
> Jeff Garzik wrote:
>> Tejun Heo wrote:
>>> Hello, all.
>>>
>>> This is the fifth take of hotplug polling patchset.  This take doesn't
>>> contain any real change than rebasing over the current upstream[U].
>>> PMP patchset will be posted soon on top of this patchset and I wanted
>>> to avoid confusion by posting patchsets in order.
>>>
>>> As the name implies, this patchset implements hotplug by polling.
>>> hp-poll is used to
>>>
>>> * Monitor ports EH gave up.  When EH gives up on a port, it freezes
>>>   the port to protect the rest of the system from it.  The user used
>>>   to have to issue manual scan to retry the port.  hp-poll can monitor
>>>   such port and retry it when hotplug event is detected.  This is also
>>>   used by PMP support.
>>>
>>> * Support hotplug on controllers which can report hotplug conditions
>>>   but cannot raise interrupt.
>>
>> Patchset seems sane.  I'll need to re-read patch #1 in depth, but I 
>> give everything a tentative ACK for now.
>>
>> My biggest concern is power usage.  On laptops for example, the 99% 
>> common case is that the user will never hot[un]plug a drive, so we 
>> shouldn't waste power bothering with poking disabled ports.
> 
> Link powersave patchset should handle that together but I'm still not 
> sure what to do w/ user interface (which sysfs node to use).  Also, 
> controllers which are used on laptops && use hp-poll by default are 
> sata_nv (old ones) and some variant of sata_sil used in ati chipset. So, 
> it shouldn't cause trouble for most laptop users.

I'm not saying it causes trouble.  Just saying that polling unused ports 
is practically guaranteed to require more power than never doing so.

It shouldn't be hard to figure out where to poke stuff into sysfs...

	Jeff

Re: [PATCHSET] hotplug polling, take 5

[Tejun Heo]

Jeff Garzik wrote:
>> Link powersave patchset should handle that together but I'm still not 
>> sure what to do w/ user interface (which sysfs node to use).  Also, 
>> controllers which are used on laptops && use hp-poll by default are 
>> sata_nv (old ones) and some variant of sata_sil used in ati chipset. 
>> So, it shouldn't cause trouble for most laptop users.
> 
> I'm not saying it causes trouble.  Just saying that polling unused ports 
> is practically guaranteed to require more power than never doing so.

Yeap, no objection there.

> It shouldn't be hard to figure out where to poke stuff into sysfs...

I dunno.  It's policy decision and we don't have ATA sysfs nodes yet. 
So, where do we begin?  Is it time to start /sys/class/ata_host/ataX tree?

Thanks.

-- 
tejun

[PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts

[Robin H. Johnson]

[-- Attachment #1: Type: text/plain, Size: 8393 bytes --]

This patch adds hp-poll support to the following drivers.

* sata_nv (generic)
* sata_sil (SIL_FLAG_NO_SATA_IRQ replaced w/ ATA_FLAG_HP_POLLING)
* sata_sis
* sata_svw
* sata_uli
* sata_vsc

All the above drivers currently don't support hotplug interrupts (H/W
restrictions or lack of doc/effort) and all hotplug operations should
be done via hp-poll; thus, ATA_FLAG_HP_POLLING is set for these
drivers.

sata_via is excluded because it randomly locks up on SCR register
access.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
---
 drivers/ata/sata_nv.c  |    6 +++++-
 drivers/ata/sata_sil.c |    9 ++++-----
 drivers/ata/sata_sis.c |    6 +++++-
 drivers/ata/sata_svw.c |   25 +++++++++++++++++++++++++
 drivers/ata/sata_uli.c |    7 ++++++-
 drivers/ata/sata_vsc.c |   17 +++++++++++++++++
 6 files changed, 62 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index bcf4934..a205991 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -368,7 +368,10 @@ static const struct ata_port_operations nv_generic_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
 	.data_xfer		= ata_data_xfer,
+	.irq_handler		= nv_generic_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -474,7 +477,8 @@ static struct ata_port_info nv_port_info[] = {
 	{
 		.sht		= &nv_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_HRST_TO_RESUME,
+				  ATA_FLAG_HRST_TO_RESUME | 
+				  ATA_FLAG_HP_POLLING,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 8f8cc5f..fa3b0e8 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -54,7 +54,6 @@ enum {
 	/*
 	 * host flags
 	 */
-	SIL_FLAG_NO_SATA_IRQ	= (1 << 28),
 	SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
 	SIL_FLAG_MOD15WRITE	= (1 << 30),
 
@@ -231,7 +230,7 @@ static const struct ata_port_info sil_port_info[] = {
 	/* sil_3112_no_sata_irq */
 	{
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
-				  SIL_FLAG_NO_SATA_IRQ,
+				  ATA_FLAG_HP_POLLING,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= 0x3f,			/* udma0-5 */
@@ -480,8 +479,8 @@ static irqreturn_t sil_interrupt(int irq, void *dev_instance)
 		if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
 			continue;
 
-		/* turn off SATA_IRQ if not supported */
-		if (ap->flags & SIL_FLAG_NO_SATA_IRQ)
+		/* ignore SATA_IRQ if not supported */
+		if (ap->flags & ATA_FLAG_HP_POLLING)
 			bmdma2 &= ~SIL_DMA_SATA_IRQ;
 
 		if (bmdma2 == 0xffffffff ||
@@ -522,7 +521,7 @@ static void sil_thaw(struct ata_port *ap)
 	ata_bmdma_irq_clear(ap);
 
 	/* turn on SATA IRQ if supported */
-	if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
+	if (!(ap->flags & ATA_FLAG_HP_POLLING))
 		writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien);
 
 	/* turn on IRQ */
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index d8ee062..fbfe0bf 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -121,6 +121,9 @@ static const struct ata_port_operations sis_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
+	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -130,7 +133,8 @@ static const struct ata_port_operations sis_ops = {
 };
 
 static struct ata_port_info sis_port_info = {
-	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+			  ATA_FLAG_HP_POLLING,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x7,
 	.udma_mask	= 0x7f,
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index cc07aac..8777e90 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -345,6 +345,9 @@ static const struct ata_port_operations k2_sata_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
+	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -465,6 +468,28 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET);
 	writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
 
+	probe_ent->sht = &k2_sata_sht;
+	probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				ATA_FLAG_MMIO | ATA_FLAG_HP_POLLING;
+	probe_ent->port_ops = &k2_sata_ops;
+	probe_ent->n_ports = 4;
+	probe_ent->irq = pdev->irq;
+	probe_ent->irq_flags = IRQF_SHARED;
+	probe_ent->mmio_base = mmio_base;
+
+	/* We don't care much about the PIO/UDMA masks, but the core won't like us
+	 * if we don't fill these
+	 */
+	probe_ent->pio_mask = 0x1f;
+	probe_ent->mwdma_mask = 0x7;
+	probe_ent->udma_mask = 0x7f;
+
+	/* different controllers have different number of ports - currently 4 or 8 */
+	/* All ports are on the same function. Multi-function device is no
+	 * longer available. This should not be seen in any system. */
+	for (i = 0; i < ent->driver_data; i++)
+		k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET);
+
 	pci_set_master(pdev);
 	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
 				 &k2_sata_sht);
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index f74e383..533c5d3 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -115,6 +115,10 @@ static const struct ata_port_operations uli_ops = {
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
+
+	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -127,7 +131,8 @@ static const struct ata_port_operations uli_ops = {
 
 static struct ata_port_info uli_port_info = {
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-			  ATA_FLAG_IGN_SIMPLEX,
+			  ATA_FLAG_IGN_SIMPLEX |
+			  ATA_FLAG_HP_POLLING,
 	.pio_mask       = 0x1f,		/* pio0-4 */
 	.udma_mask      = 0x7f,		/* udma0-6 */
 	.port_ops       = &uli_ops,
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 80126f8..df8782f 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -333,6 +333,9 @@ static const struct ata_port_operations vsc_sata_ops = {
 	.thaw			= vsc_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.hp_poll_activate	= sata_std_hp_poll_activate,
+	.hp_poll		= sata_std_hp_poll,
+	.irq_handler		= vsc_sata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -425,6 +428,20 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 	 * Due to a bug in the chip, the default cache line size can't be
 	 * used (unless the default is non-zero).
 	 */
+	pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
+
+	probe_ent->sht = &vsc_sata_sht;
+	probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				ATA_FLAG_MMIO | ATA_FLAG_HP_POLLING;
+	probe_ent->port_ops = &vsc_sata_ops;
+	probe_ent->n_ports = 4;
+	probe_ent->irq = pdev->irq;
+	probe_ent->irq_flags = IRQF_SHARED;
+	probe_ent->mmio_base = mmio_base;
+
+	/* We don't care much about the PIO/UDMA masks, but the core won't like us
+	 * if we don't fill these
+	 */
 	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls);
 	if (cls == 0x00)
 		pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
-- 
Robin Hugh Johnson
Gentoo Linux Developer & Council Member
E-Mail     : robbat2@gentoo.org
GnuPG FP   : 11AC BA4F 4778 E3F6 E4ED  F38E B27B 944E 3488 4E85

[-- Attachment #2: Type: application/pgp-signature, Size: 321 bytes --]