From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alan Cox Subject: Re: SATA driver issues? Date: Tue, 24 Oct 2006 13:11:25 +0100 Message-ID: <1161691885.22348.10.camel@localhost.localdomain> References: <2F0FC2A92C0B154BB406D5E74CB3E6930336BD5F@3putt.int.lantronix.com> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Received: from outpipe-village-512-1.bc.nu ([81.2.110.250]:34744 "EHLO lxorguk.ukuu.org.uk") by vger.kernel.org with ESMTP id S1161002AbWJXMIm (ORCPT ); Tue, 24 Oct 2006 08:08:42 -0400 In-Reply-To: <2F0FC2A92C0B154BB406D5E74CB3E6930336BD5F@3putt.int.lantronix.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Danny Sung Cc: Benjamin Herrenschmidt , Jeff Garzik , linux-ide@vger.kernel.org Ar Llu, 2006-10-23 am 18:27 -0700, ysgrifennodd Danny Sung: > Prior to the firmware update, I got errors like these, along with > periodic system hangs: > Oct 15 03:50:40 aeolus kernel: ata2: command 0xea timeout, stat 0x50 > host_stat 0x0 > Oct 15 03:50:40 aeolus kernel: ata2: status=0x50 { DriveReady > SeekComplete } > Oct 15 03:50:40 aeolus kernel: ata2: error=0x01 { AddrMarkNotFound } Your drive is reporting an error that it cannot find a disk sector. > My latest test was to boot up with the following kernel parameters: > "pci=noacpi idebus=66". I'm not quite sure if I should be using 66 or Well unless your system is very strange your idebus is 33Mhz, you only need idebus= on old 486 systems with vesa local bus.