From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, mjg59@srcf.ucam.org, rdunlap@xenotime.net,
trenn@suse.de, alan@lxorguk.ukuu.org.uk, forrest.zhao@gmail.com,
kristen.c.accardi@intel.com, lenb@kernel.org,
linux-acpi@vger.kernel.org, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 01/13] ahci: consolidate common port flags
Date: Mon, 23 Apr 2007 02:41:05 +0900 [thread overview]
Message-ID: <1177263665394-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11772636651400-git-send-email-htejun@gmail.com>
Consolidate common port flags into AHCI_FLAG_COMMON.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/ahci.c | 29 ++++++++++-------------------
1 files changed, 10 insertions(+), 19 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 7c61bc7..34c5534 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -170,6 +170,10 @@ enum {
AHCI_FLAG_IGN_IRQ_IF_ERR = (1 << 25), /* ignore IRQ_IF_ERR */
AHCI_FLAG_HONOR_PI = (1 << 26), /* honor PORTS_IMPL */
AHCI_FLAG_IGN_SERR_INTERNAL = (1 << 27), /* ignore SERR_INTERNAL */
+
+ AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+ ATA_FLAG_SKIP_D2H_BSY,
};
struct ahci_cmd_hdr {
@@ -323,54 +327,41 @@ static const struct ata_port_operations ahci_vt8251_ops = {
static const struct ata_port_info ahci_port_info[] = {
/* board_ahci */
{
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_SKIP_D2H_BSY,
+ .flags = AHCI_FLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &ahci_ops,
},
/* board_ahci_pi */
{
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_SKIP_D2H_BSY | AHCI_FLAG_HONOR_PI,
+ .flags = AHCI_FLAG_COMMON | AHCI_FLAG_HONOR_PI,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &ahci_ops,
},
/* board_ahci_vt8251 */
{
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_SKIP_D2H_BSY |
- ATA_FLAG_HRST_TO_RESUME | AHCI_FLAG_NO_NCQ,
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_HRST_TO_RESUME |
+ AHCI_FLAG_NO_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &ahci_vt8251_ops,
},
/* board_ahci_ign_iferr */
{
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_SKIP_D2H_BSY |
- AHCI_FLAG_IGN_IRQ_IF_ERR,
+ .flags = AHCI_FLAG_COMMON | AHCI_FLAG_IGN_IRQ_IF_ERR,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &ahci_ops,
},
/* board_ahci_sb600 */
{
- .sht = &ahci_sht,
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_SKIP_D2H_BSY |
+ .flags = AHCI_FLAG_COMMON |
AHCI_FLAG_IGN_SERR_INTERNAL,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &ahci_ops,
},
-
};
static const struct pci_device_id ahci_pci_tbl[] = {
--
1.5.0.3
next prev parent reply other threads:[~2007-04-22 17:41 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-22 17:41 [PATCHSET] libata: improve ATA ACPI support Tejun Heo
2007-04-22 17:41 ` Tejun Heo [this message]
2007-04-22 17:49 ` [PATCH 01/13] ahci: consolidate common port flags Alan Cox
2007-04-28 18:51 ` Jeff Garzik
2007-04-22 17:41 ` [PATCH 03/13] libata: separate out ata_dev_reread_id() Tejun Heo
2007-04-28 18:53 ` Jeff Garzik
2007-04-29 2:52 ` Tejun Heo
2007-04-22 17:41 ` [PATCH 02/13] libata: separate ATA_EHI_DID_RESET into DID_SOFTRESET and DID_HARDRESET Tejun Heo
2007-04-22 17:50 ` Alan Cox
2007-04-22 17:41 ` [PATCH 10/13] libata-acpi: miscellaneous cleanups Tejun Heo
2007-04-28 19:00 ` Jeff Garzik
2007-04-22 17:41 ` [PATCH 06/13] libata-acpi: clean up parameters and misc stuff Tejun Heo
2007-04-28 18:55 ` Jeff Garzik
2007-04-29 2:54 ` Tejun Heo
2007-04-29 3:12 ` Jeff Garzik
2007-04-22 17:41 ` [PATCH 08/13] libata-acpi: implement ata_acpi_associate() Tejun Heo
2007-04-28 18:59 ` Jeff Garzik
2007-04-22 17:41 ` [PATCH 05/13] libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/ Tejun Heo
2007-04-28 18:54 ` Jeff Garzik
2007-04-22 17:41 ` [PATCH 07/13] libata-acpi: add ATA_FLAG_ACPI_SATA port flag Tejun Heo
2007-04-22 17:53 ` Alan Cox
2007-04-22 18:03 ` Tejun Heo
2007-04-22 18:14 ` Alan Cox
2007-04-23 8:00 ` Tejun Heo
2007-04-22 18:03 ` Alan Cox
2007-04-22 18:09 ` Tejun Heo
2007-04-28 18:58 ` Jeff Garzik
2007-04-29 2:56 ` Tejun Heo
2007-04-22 17:41 ` [PATCH 09/13] libata-acpi: clean up ata_acpi_exec_tfs() Tejun Heo
2007-04-28 19:00 ` Jeff Garzik
2007-04-29 2:56 ` Tejun Heo
2007-04-22 17:41 ` [PATCH 04/13] libata: during revalidation, check n_sectors after device is configured Tejun Heo
2007-04-22 17:41 ` [PATCH 11/13] libata: reimplement ACPI invocation Tejun Heo
2007-04-28 19:09 ` Jeff Garzik
2007-04-22 17:41 ` [PATCH 13/13] libata-acpi: implement _GTM/_STM support Tejun Heo
2007-04-22 17:41 ` [PATCH 12/13] libata-acpi: remove redundant checks Tejun Heo
2007-04-22 18:25 ` [PATCHSET] libata: improve ATA ACPI support Alan Cox
2007-04-23 8:06 ` Tejun Heo
2007-04-23 22:05 ` Mark Lord
2007-04-23 23:03 ` Bartlomiej Zolnierkiewicz
2007-04-23 22:03 ` Mark Lord
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1177263665394-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=forrest.zhao@gmail.com \
--cc=jeff@garzik.org \
--cc=kristen.c.accardi@intel.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=mjg59@srcf.ucam.org \
--cc=rdunlap@xenotime.net \
--cc=trenn@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).