From: Soeren Sonnenburg <kernel@nn7.de>
To: Linux Kernel <linux-kernel@vger.kernel.org>,
Linux-ide <linux-ide@vger.kernel.org>
Subject: ata1: soft resetting port
Date: Tue, 19 Jun 2007 15:48:22 +0200 [thread overview]
Message-ID: <1182260902.14805.60.camel@localhost> (raw)
Dear List,
since the switch to
CONFIG_ATA=y
CONFIG_ATA_ACPI=y
CONFIG_ATA_PIIX=y,
the ATA_PIIX driver manages both, internal sata disk aswell as cd/dvd
rom. However I am being flooded with the error messages below (well they
appear from time to time, dominating dmesg).
This happens on kernel 2.6.22-rc5, I am copying relevant parts from dmesg:
libata version 2.21 loaded.
ata_piix 0000:00:1f.1: version 2.11
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140c0 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140c8 irq 15
ata1.00: ATAPI: HL-DT-ST DVDRW GWA4080M, AA26, max UDMA/33
ata1.00: configured for UDMA/33
ATA: abnormal status 0x7F on port 0x00010177
scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRW GWA4080M AA26 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
ata_piix 0000:00:1f.2: invalid MAP value 0
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x000140d8 ctl 0x000140f6 bmdma 0x00014020 irq 0
ata4: SATA max UDMA/133 cmd 0x000140d0 ctl 0x000140f2 bmdma 0x00014028 irq 0
ata3.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
ata3.01: ATA-7: ST9120821AS, 7.01, max UDMA/133
ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
ata3.01: configured for UDMA/133
ATA: abnormal status 0x7F on port 0x000140d7
the actual errors:
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
res 51/24:03:00:00:20/00:00:00:00:00/a0 Emask 0x1 (device error)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata1.00: (BMDMA stat 0x5)
ata1.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
res 00/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata1.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
res 00/24:03:00:00:20/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata1.00: (BMDMA stat 0x5)
ata1.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
res 00/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata1.00: (BMDMA stat 0x5)
ata1.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
res 00/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
res 51/24:03:00:00:20/00:00:00:00:00/a0 Emask 0x1 (device error)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x5)
ata1.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata1.00: (BMDMA stat 0x5)
ata1.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
res 00/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
ata1: soft resetting port
--
Sometimes, there's a moment as you're waking, when you become aware of
the real world around you, but you're still dreaming.
next reply other threads:[~2007-06-19 13:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-19 13:48 Soeren Sonnenburg [this message]
2007-07-03 6:40 ` ata1: soft resetting port Tejun Heo
2007-07-04 10:40 ` Soeren Sonnenburg
2007-07-04 18:01 ` Tejun Heo
2007-07-04 19:22 ` Soeren Sonnenburg
2007-07-05 2:21 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1182260902.14805.60.camel@localhost \
--to=kernel@nn7.de \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).