linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tejun Heo <htejun@gmail.com>
To: Jeff Garzik <jeff@garzik.org>,
	Alan Cox <alan@lxorguk.ukuu.org.uk>,
	linux-ide@vger.kernel.org, Forrest Zhao <forrest.zhao@gmail.com>
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 02/12] libata-pmp-prep: add @new_class to ata_dev_revalidate()
Date: Sun, 1 Jul 2007 19:26:07 +0900	[thread overview]
Message-ID: <11832855672308-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11832855672398-git-send-email-htejun@gmail.com>

Consider newly found class code while revalidating.  PMP resetting
always results in valid class code and issuing PMP commands to
ATA/ATAPI device isn't very attractive.  Add @new_class to
ata_dev_revalidate() and check class code for revalidation.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-core.c |   15 +++++++++++++--
 drivers/ata/libata-eh.c   |    3 ++-
 drivers/ata/libata.h      |    3 ++-
 3 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index f4863b6..d366ac2 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2790,7 +2790,7 @@ static int ata_dev_set_mode(struct ata_device *dev)
 	}
 
 	ehc->i.flags |= ATA_EHI_POST_SETMODE;
-	rc = ata_dev_revalidate(dev, 0);
+	rc = ata_dev_revalidate(dev, ATA_DEV_UNKNOWN, 0);
 	ehc->i.flags &= ~ATA_EHI_POST_SETMODE;
 	if (rc)
 		return rc;
@@ -3699,6 +3699,7 @@ int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags)
 /**
  *	ata_dev_revalidate - Revalidate ATA device
  *	@dev: device to revalidate
+ *	@new_class: new class code
  *	@readid_flags: read ID flags
  *
  *	Re-read IDENTIFY page, make sure @dev is still attached to the
@@ -3710,7 +3711,8 @@ int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags)
  *	RETURNS:
  *	0 on success, negative errno otherwise
  */
-int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags)
+int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
+		       unsigned int readid_flags)
 {
 	u64 n_sectors = dev->n_sectors;
 	int rc;
@@ -3718,6 +3720,15 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags)
 	if (!ata_dev_enabled(dev))
 		return -ENODEV;
 
+	/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
+	if (ata_class_enabled(new_class) &&
+	    new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) {
+		ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n",
+			       dev->class, new_class);
+		rc = -ENODEV;
+		goto fail;
+	}
+
 	/* re-read ID */
 	rc = ata_dev_reread_id(dev, readid_flags);
 	if (rc)
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index eb51b76..7e8ec17 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1966,7 +1966,8 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 			}
 
 			ata_eh_about_to_do(link, dev, ATA_EH_REVALIDATE);
-			rc = ata_dev_revalidate(dev, readid_flags);
+			rc = ata_dev_revalidate(dev, ehc->classes[dev->devno],
+						readid_flags);
 			if (rc)
 				goto err;
 
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 6d85ede..4153817 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -76,7 +76,8 @@ extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
 extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 			   unsigned int flags, u16 *id);
 extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags);
-extern int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags);
+extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
+			      unsigned int readid_flags);
 extern int ata_dev_configure(struct ata_device *dev);
 extern int sata_down_spd_limit(struct ata_link *link);
 extern int sata_set_spd_needed(struct ata_link *link);
-- 
1.5.0.3



  parent reply	other threads:[~2007-07-01 10:26 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-07-01 10:26 [PATCHSET 3/4] libata: prep for PMP support, take 4 Tejun Heo
2007-07-01 10:26 ` [PATCH 01/12] libata-pmp: add PMP related constants, fields, ops and update helpers Tejun Heo
2007-07-01 10:26 ` Tejun Heo [this message]
2007-07-01 10:26 ` [PATCH 05/12] libata-pmp-prep: implement ops->qc_defer() Tejun Heo
2007-07-01 10:26 ` [PATCH 06/12] libata-pmp-prep: implement qc_defer helpers Tejun Heo
2007-07-01 10:26 ` [PATCH 07/12] libata-pmp-prep: implement ATA_LFLAG_NO_SRST, ASSUME_ATA and ASSUME_SEMB Tejun Heo
2007-07-01 10:26 ` [PATCH 03/12] libata-pmp-prep: make a number of functions global to libata Tejun Heo
2007-07-01 10:26 ` [PATCH 04/12] libata-pmp-prep: add @is_cmd to ata_tf_to_fis() Tejun Heo
2007-07-01 10:26 ` [PATCH 08/12] libata-pmp-prep: implement ATA_LFLAG_NO_RETRY Tejun Heo
2007-07-01 10:26 ` [PATCH 11/12] libata-pmp-prep: implement ATA_HORKAGE_SKIP_PM Tejun Heo
2007-07-01 10:26 ` [PATCH 10/12] libata-pmp-prep: implement EH fast-fail path Tejun Heo
2007-07-01 10:26 ` [PATCH 12/12] libata-pmp-prep: implement sata_async_notification() Tejun Heo
2007-07-01 10:26 ` [PATCH 09/12] libata-pmp-prep: implement ATA_LFLAG_DISABLED Tejun Heo
2007-07-11  2:04 ` [PATCHSET 3/4] libata: prep for PMP support, take 4 Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11832855672308-git-send-email-htejun@gmail.com \
    --to=htejun@gmail.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=forrest.zhao@gmail.com \
    --cc=jeff@garzik.org \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).