From: Tejun Heo <htejun@gmail.com>
To: Jeff Garzik <jeff@garzik.org>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-ide@vger.kernel.org, Forrest Zhao <forrest.zhao@gmail.com>
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 01/21] ahci: build fix for !CONFIG_PM
Date: Mon, 16 Jul 2007 14:29:38 +0900 [thread overview]
Message-ID: <11845637781555-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11845637782629-git-send-email-htejun@gmail.com>
ahci_port_resume() is also used while starting port. Move it out of
CONFIG_PM block.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/ahci.c | 16 ++++++++--------
1 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 11e4eb9..eaec5e5 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1519,6 +1519,14 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
}
}
+static int ahci_port_resume(struct ata_port *ap)
+{
+ ahci_power_up(ap);
+ ahci_start_port(ap);
+
+ return 0;
+}
+
#ifdef CONFIG_PM
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
{
@@ -1536,14 +1544,6 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
return rc;
}
-static int ahci_port_resume(struct ata_port *ap)
-{
- ahci_power_up(ap);
- ahci_start_port(ap);
-
- return 0;
-}
-
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
--
1.5.0.3
next prev parent reply other threads:[~2007-07-16 5:29 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-16 5:29 [PATCHSET 1/4] libata: misc updates in preparation of PMP support, take #2 Tejun Heo
2007-07-16 5:29 ` [PATCH 03/21] ahci: use deadline instead of fixed timeout for 1st FIS for SRST Tejun Heo
2007-07-16 5:29 ` Tejun Heo [this message]
2007-07-16 5:29 ` [PATCH 02/21] libata: add @is_cmd to ata_tf_to_fis() Tejun Heo
2007-07-20 11:56 ` Jeff Garzik
2007-07-20 12:02 ` Jeff Garzik
2007-07-20 12:18 ` Tejun Heo
2007-07-20 12:20 ` Jeff Garzik
2007-07-16 5:29 ` [PATCH 05/21] ahci: separate out ahci_exec_polled_cmd() Tejun Heo
2007-07-16 5:29 ` [PATCH 10/21] libata: improve EH report formatting Tejun Heo
2007-07-16 5:29 ` [PATCH 08/21] sata_sil24: separate out sil24_exec_polled_cmd() Tejun Heo
2007-07-16 5:29 ` [PATCH 07/21] sata_sil24: replace sil24_update_tf() with sil24_read_tf() Tejun Heo
2007-07-16 5:29 ` [PATCH 04/21] ahci: separate out ahci_kick_engine() Tejun Heo
2007-07-16 5:29 ` [PATCH 06/21] ahci: separate out ahci_do_softreset() Tejun Heo
2007-07-16 5:29 ` [PATCH 09/21] sata_sil24: separate out sil24_do_softreset() Tejun Heo
2007-07-16 5:29 ` [PATCH 13/21] ahci: make NO_NCQ handling more consistent Tejun Heo
2007-07-16 5:29 ` [PATCH 11/21] libata: implement AC_ERR_NCQ Tejun Heo
2007-07-16 5:29 ` [PATCH 17/21] libata: improve SCSI scan failure handling Tejun Heo
2007-07-20 12:26 ` Jeff Garzik
2007-07-20 12:28 ` Tejun Heo
2007-07-16 5:29 ` [PATCH 15/21] libata: improve SATA PHY speed down logic Tejun Heo
2007-07-20 12:20 ` Jeff Garzik
2007-07-16 5:29 ` [PATCH 12/21] libata: make ->scr_read/write callbacks return error code Tejun Heo
2007-07-20 11:58 ` Jeff Garzik
2007-07-16 5:29 ` [PATCH 18/21] libata: reorganize ata_ehi_hotplugged() Tejun Heo
2007-07-16 5:29 ` [PATCH 14/21] ahci: implement SCR_NOTIFICATION r/w Tejun Heo
2007-07-16 5:29 ` [PATCH 16/21] libata: quickly trigger SATA SPD down after debouncing failed Tejun Heo
2007-07-16 5:29 ` [PATCH 20/21] libata: schedule probing after SError access failure during autopsy Tejun Heo
2007-07-16 5:29 ` [PATCH 19/21] libata: clear HOTPLUG flag after a reset Tejun Heo
2007-07-16 5:29 ` [PATCH 21/21] libata: implement EH fast drain Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11845637781555-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=forrest.zhao@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).