From: Tejun Heo <htejun@gmail.com>
To: Jeff Garzik <jeff@garzik.org>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-ide@vger.kernel.org, Forrest Zhao <forrest.zhao@gmail.com>
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 08/21] sata_sil24: separate out sil24_exec_polled_cmd()
Date: Mon, 16 Jul 2007 14:29:39 +0900 [thread overview]
Message-ID: <11845637792724-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11845637782629-git-send-email-htejun@gmail.com>
Separate out sil24_exec_polled_cmd() from sil24_softreset(). This
will be used to implement sil24_pmp_read/write().
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/sata_sil24.c | 76 ++++++++++++++++++++++++++++++++++------------
1 files changed, 56 insertions(+), 20 deletions(-)
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 5f8afa9..e6fe4c4 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -531,16 +531,60 @@ static int sil24_init_port(struct ata_port *ap)
return 0;
}
-static int sil24_softreset(struct ata_port *ap, unsigned int *class,
- unsigned long deadline)
+static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
+ const struct ata_taskfile *tf,
+ int is_cmd, u32 ctrl,
+ unsigned long timeout_msec)
{
void __iomem *port = ap->ioaddr.cmd_addr;
struct sil24_port_priv *pp = ap->private_data;
struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
dma_addr_t paddr = pp->cmd_block_dma;
+ u32 irq_enabled, irq_mask, irq_stat;
+ int rc;
+
+ prb->ctrl = cpu_to_le16(ctrl);
+ ata_tf_to_fis(tf, pmp, is_cmd, prb->fis);
+
+ /* temporarily plug completion and error interrupts */
+ irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
+ writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
+
+ writel((u32)paddr, port + PORT_CMD_ACTIVATE);
+ writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
+
+ irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
+ irq_stat = ata_wait_register(port + PORT_IRQ_STAT, irq_mask, 0x0,
+ 10, timeout_msec);
+
+ writel(irq_mask, port + PORT_IRQ_STAT); /* clear IRQs */
+ irq_stat >>= PORT_IRQ_RAW_SHIFT;
+
+ if (irq_stat & PORT_IRQ_COMPLETE)
+ rc = 0;
+ else {
+ /* force port into known state */
+ sil24_init_port(ap);
+
+ if (irq_stat & PORT_IRQ_ERROR)
+ rc = -EIO;
+ else
+ rc = -EBUSY;
+ }
+
+ /* restore IRQ enabled */
+ writel(irq_enabled, port + PORT_IRQ_ENABLE_SET);
+
+ return rc;
+}
+
+static int sil24_softreset(struct ata_port *ap, unsigned int *class,
+ unsigned long deadline)
+{
+ unsigned long timeout_msec = 0;
struct ata_taskfile tf;
- u32 mask, irq_stat;
const char *reason;
+ int rc;
DPRINTK("ENTER\n");
@@ -557,24 +601,16 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class,
}
/* do SRST */
- prb->ctrl = cpu_to_le16(PRB_CTRL_SRST);
- prb->fis[1] = 0; /* no PMP yet */
+ if (time_after(deadline, jiffies))
+ timeout_msec = jiffies_to_msecs(deadline - jiffies);
- writel((u32)paddr, port + PORT_CMD_ACTIVATE);
- writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
-
- mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
- irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0,
- 100, jiffies_to_msecs(deadline - jiffies));
-
- writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */
- irq_stat >>= PORT_IRQ_RAW_SHIFT;
-
- if (!(irq_stat & PORT_IRQ_COMPLETE)) {
- if (irq_stat & PORT_IRQ_ERROR)
- reason = "SRST command error";
- else
- reason = "timeout";
+ ata_tf_init(ap->device, &tf); /* doesn't really matter */
+ rc = sil24_exec_polled_cmd(ap, 0, &tf, 0, PRB_CTRL_SRST, timeout_msec);
+ if (rc == -EBUSY) {
+ reason = "timeout";
+ goto err;
+ } else if (rc) {
+ reason = "SRST command error";
goto err;
}
--
1.5.0.3
next prev parent reply other threads:[~2007-07-16 5:29 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-16 5:29 [PATCHSET 1/4] libata: misc updates in preparation of PMP support, take #2 Tejun Heo
2007-07-16 5:29 ` [PATCH 02/21] libata: add @is_cmd to ata_tf_to_fis() Tejun Heo
2007-07-20 11:56 ` Jeff Garzik
2007-07-20 12:02 ` Jeff Garzik
2007-07-20 12:18 ` Tejun Heo
2007-07-20 12:20 ` Jeff Garzik
2007-07-16 5:29 ` [PATCH 01/21] ahci: build fix for !CONFIG_PM Tejun Heo
2007-07-16 5:29 ` [PATCH 03/21] ahci: use deadline instead of fixed timeout for 1st FIS for SRST Tejun Heo
2007-07-16 5:29 ` [PATCH 09/21] sata_sil24: separate out sil24_do_softreset() Tejun Heo
2007-07-16 5:29 ` [PATCH 06/21] ahci: separate out ahci_do_softreset() Tejun Heo
2007-07-16 5:29 ` [PATCH 04/21] ahci: separate out ahci_kick_engine() Tejun Heo
2007-07-16 5:29 ` [PATCH 07/21] sata_sil24: replace sil24_update_tf() with sil24_read_tf() Tejun Heo
2007-07-16 5:29 ` Tejun Heo [this message]
2007-07-16 5:29 ` [PATCH 05/21] ahci: separate out ahci_exec_polled_cmd() Tejun Heo
2007-07-16 5:29 ` [PATCH 10/21] libata: improve EH report formatting Tejun Heo
2007-07-16 5:29 ` [PATCH 14/21] ahci: implement SCR_NOTIFICATION r/w Tejun Heo
2007-07-16 5:29 ` [PATCH 16/21] libata: quickly trigger SATA SPD down after debouncing failed Tejun Heo
2007-07-16 5:29 ` [PATCH 12/21] libata: make ->scr_read/write callbacks return error code Tejun Heo
2007-07-20 11:58 ` Jeff Garzik
2007-07-16 5:29 ` [PATCH 18/21] libata: reorganize ata_ehi_hotplugged() Tejun Heo
2007-07-16 5:29 ` [PATCH 17/21] libata: improve SCSI scan failure handling Tejun Heo
2007-07-20 12:26 ` Jeff Garzik
2007-07-20 12:28 ` Tejun Heo
2007-07-16 5:29 ` [PATCH 15/21] libata: improve SATA PHY speed down logic Tejun Heo
2007-07-20 12:20 ` Jeff Garzik
2007-07-16 5:29 ` [PATCH 11/21] libata: implement AC_ERR_NCQ Tejun Heo
2007-07-16 5:29 ` [PATCH 13/21] ahci: make NO_NCQ handling more consistent Tejun Heo
2007-07-16 5:29 ` [PATCH 21/21] libata: implement EH fast drain Tejun Heo
2007-07-16 5:29 ` [PATCH 19/21] libata: clear HOTPLUG flag after a reset Tejun Heo
2007-07-16 5:29 ` [PATCH 20/21] libata: schedule probing after SError access failure during autopsy Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11845637792724-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=forrest.zhao@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).