From: Tejun Heo <htejun@gmail.com>
To: Jeff Garzik <jeff@garzik.org>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-ide@vger.kernel.org, Forrest Zhao <forrest.zhao@gmail.com>
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 16/21] libata: quickly trigger SATA SPD down after debouncing failed
Date: Mon, 16 Jul 2007 14:29:40 +0900 [thread overview]
Message-ID: <11845637801929-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11845637782629-git-send-email-htejun@gmail.com>
Debouncing failure is a good indicator of basic link problem. Use
-EPIPE to indicate debouncing failure and make ata_eh_reset() invoke
sata_down_spd_limit() if the error occurs during reset.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/libata-core.c | 6 ++++--
drivers/ata/libata-eh.c | 2 +-
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c60155e..58bc40e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3267,9 +3267,11 @@ int sata_phy_debounce(struct ata_port *ap, const unsigned long *params,
last = cur;
last_jiffies = jiffies;
- /* check deadline */
+ /* Check deadline. If debouncing failed, return
+ * -EPIPE to tell upper layer to lower link speed.
+ */
if (time_after(jiffies, deadline))
- return -EBUSY;
+ return -EPIPE;
}
}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 183eaf4..1a4397a 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1790,7 +1790,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify,
schedule_timeout_uninterruptible(delta);
}
- if (reset == hardreset &&
+ if (rc == -EPIPE ||
try == ARRAY_SIZE(ata_eh_reset_timeouts) - 1)
sata_down_spd_limit(ap);
if (hardreset)
--
1.5.0.3
next prev parent reply other threads:[~2007-07-16 5:29 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-16 5:29 [PATCHSET 1/4] libata: misc updates in preparation of PMP support, take #2 Tejun Heo
2007-07-16 5:29 ` [PATCH 01/21] ahci: build fix for !CONFIG_PM Tejun Heo
2007-07-16 5:29 ` [PATCH 03/21] ahci: use deadline instead of fixed timeout for 1st FIS for SRST Tejun Heo
2007-07-16 5:29 ` [PATCH 02/21] libata: add @is_cmd to ata_tf_to_fis() Tejun Heo
2007-07-20 11:56 ` Jeff Garzik
2007-07-20 12:02 ` Jeff Garzik
2007-07-20 12:18 ` Tejun Heo
2007-07-20 12:20 ` Jeff Garzik
2007-07-16 5:29 ` [PATCH 07/21] sata_sil24: replace sil24_update_tf() with sil24_read_tf() Tejun Heo
2007-07-16 5:29 ` [PATCH 04/21] ahci: separate out ahci_kick_engine() Tejun Heo
2007-07-16 5:29 ` [PATCH 10/21] libata: improve EH report formatting Tejun Heo
2007-07-16 5:29 ` [PATCH 05/21] ahci: separate out ahci_exec_polled_cmd() Tejun Heo
2007-07-16 5:29 ` [PATCH 08/21] sata_sil24: separate out sil24_exec_polled_cmd() Tejun Heo
2007-07-16 5:29 ` [PATCH 09/21] sata_sil24: separate out sil24_do_softreset() Tejun Heo
2007-07-16 5:29 ` [PATCH 06/21] ahci: separate out ahci_do_softreset() Tejun Heo
2007-07-16 5:29 ` [PATCH 13/21] ahci: make NO_NCQ handling more consistent Tejun Heo
2007-07-16 5:29 ` [PATCH 12/21] libata: make ->scr_read/write callbacks return error code Tejun Heo
2007-07-20 11:58 ` Jeff Garzik
2007-07-16 5:29 ` [PATCH 18/21] libata: reorganize ata_ehi_hotplugged() Tejun Heo
2007-07-16 5:29 ` [PATCH 11/21] libata: implement AC_ERR_NCQ Tejun Heo
2007-07-16 5:29 ` [PATCH 17/21] libata: improve SCSI scan failure handling Tejun Heo
2007-07-20 12:26 ` Jeff Garzik
2007-07-20 12:28 ` Tejun Heo
2007-07-16 5:29 ` [PATCH 15/21] libata: improve SATA PHY speed down logic Tejun Heo
2007-07-20 12:20 ` Jeff Garzik
2007-07-16 5:29 ` Tejun Heo [this message]
2007-07-16 5:29 ` [PATCH 14/21] ahci: implement SCR_NOTIFICATION r/w Tejun Heo
2007-07-16 5:29 ` [PATCH 20/21] libata: schedule probing after SError access failure during autopsy Tejun Heo
2007-07-16 5:29 ` [PATCH 21/21] libata: implement EH fast drain Tejun Heo
2007-07-16 5:29 ` [PATCH 19/21] libata: clear HOTPLUG flag after a reset Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11845637801929-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=forrest.zhao@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).