From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 07/14] libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags
Date: Sat, 4 Aug 2007 17:42:41 +0900 [thread overview]
Message-ID: <11862169611569-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11862169601938-git-send-email-htejun@gmail.com>
HRST_TO_RESUME and SKIP_D2H_BSY are link attributes. Move them to
ata_link->flags. This will allow host and PMP links to have different
attributes. ata_port_info->link_flags is added and used by LLDs to
specify these flags during initialization.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/ahci.c | 16 ++++++++++------
drivers/ata/libata-core.c | 5 +++--
drivers/ata/sata_nv.c | 14 +++++++-------
drivers/ata/sata_sil.c | 7 ++++++-
drivers/ata/sata_sil24.c | 7 +++++--
include/linux/libata.h | 11 ++++++++---
6 files changed, 39 insertions(+), 21 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index da749af..757369e 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -178,8 +178,8 @@ enum {
AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_SKIP_D2H_BSY |
ATA_FLAG_ACPI_SATA,
+ AHCI_LFLAG_COMMON = ATA_LFLAG_SKIP_D2H_BSY,
};
struct ahci_cmd_hdr {
@@ -333,6 +333,7 @@ static const struct ata_port_info ahci_port_info[] = {
/* board_ahci */
{
.flags = AHCI_FLAG_COMMON,
+ .link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
@@ -340,14 +341,15 @@ static const struct ata_port_info ahci_port_info[] = {
/* board_ahci_pi */
{
.flags = AHCI_FLAG_COMMON | AHCI_FLAG_HONOR_PI,
+ .link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
/* board_ahci_vt8251 */
{
- .flags = AHCI_FLAG_COMMON | ATA_FLAG_HRST_TO_RESUME |
- AHCI_FLAG_NO_NCQ,
+ .flags = AHCI_FLAG_COMMON | AHCI_FLAG_NO_NCQ,
+ .link_flags = AHCI_LFLAG_COMMON | ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_vt8251_ops,
@@ -355,6 +357,7 @@ static const struct ata_port_info ahci_port_info[] = {
/* board_ahci_ign_iferr */
{
.flags = AHCI_FLAG_COMMON | AHCI_FLAG_IGN_IRQ_IF_ERR,
+ .link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
@@ -364,6 +367,7 @@ static const struct ata_port_info ahci_port_info[] = {
.flags = AHCI_FLAG_COMMON |
AHCI_FLAG_IGN_SERR_INTERNAL |
AHCI_FLAG_32BIT_ONLY,
+ .link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
@@ -373,9 +377,9 @@ static const struct ata_port_info ahci_port_info[] = {
.sht = &ahci_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_SKIP_D2H_BSY | AHCI_FLAG_HONOR_PI |
- AHCI_FLAG_NO_NCQ | AHCI_FLAG_NO_MSI |
- AHCI_FLAG_MV_PATA,
+ AHCI_FLAG_HONOR_PI | AHCI_FLAG_NO_NCQ |
+ AHCI_FLAG_NO_MSI | AHCI_FLAG_MV_PATA,
+ .link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index d7be9fb..d2600e0 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3331,7 +3331,7 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline)
/* handle link resume */
if ((ehc->i.flags & ATA_EHI_RESUME_LINK) &&
- (ap->flags & ATA_FLAG_HRST_TO_RESUME))
+ (link->flags & ATA_LFLAG_HRST_TO_RESUME))
ehc->i.action |= ATA_EH_HARDRESET;
/* if we're about to do hardreset, nothing more to do */
@@ -3350,7 +3350,7 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline)
/* Wait for !BSY if the controller can wait for the first D2H
* Reg FIS and we don't know that no device is attached.
*/
- if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_link_offline(link)) {
+ if (!(link->flags & ATA_LFLAG_SKIP_D2H_BSY) && !ata_link_offline(link)) {
rc = ata_wait_ready(ap, deadline);
if (rc && rc != -ENODEV) {
ata_link_printk(link, KERN_WARNING, "device not ready "
@@ -6249,6 +6249,7 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev,
ap->mwdma_mask = pi->mwdma_mask;
ap->udma_mask = pi->udma_mask;
ap->flags |= pi->flags;
+ ap->link.flags |= pi->link_flags;
ap->ops = pi->port_ops;
if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 7b7d14c..1f71946 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -455,8 +455,8 @@ static const struct ata_port_info nv_port_info[] = {
/* generic */
{
.sht = &nv_sht,
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_HRST_TO_RESUME,
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+ .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
@@ -466,8 +466,8 @@ static const struct ata_port_info nv_port_info[] = {
/* nforce2/3 */
{
.sht = &nv_sht,
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_HRST_TO_RESUME,
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+ .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
@@ -477,8 +477,8 @@ static const struct ata_port_info nv_port_info[] = {
/* ck804 */
{
.sht = &nv_sht,
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_HRST_TO_RESUME,
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+ .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
@@ -489,8 +489,8 @@ static const struct ata_port_info nv_port_info[] = {
{
.sht = &nv_adma_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_HRST_TO_RESUME |
ATA_FLAG_MMIO | ATA_FLAG_NCQ,
+ .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 4b2ebc5..78f01aa 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -59,7 +59,8 @@ enum {
SIL_FLAG_MOD15WRITE = (1 << 30),
SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME,
+ ATA_FLAG_MMIO,
+ SIL_DFL_LINK_FLAGS = ATA_LFLAG_HRST_TO_RESUME,
/*
* Controller IDs
@@ -216,6 +217,7 @@ static const struct ata_port_info sil_port_info[] = {
/* sil_3112 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
+ .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@@ -225,6 +227,7 @@ static const struct ata_port_info sil_port_info[] = {
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
SIL_FLAG_NO_SATA_IRQ,
+ .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@@ -233,6 +236,7 @@ static const struct ata_port_info sil_port_info[] = {
/* sil_3512 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
+ .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@@ -241,6 +245,7 @@ static const struct ata_port_info sil_port_info[] = {
/* sil_3114 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
+ .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index a1f3b31..8d89053 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -237,8 +237,8 @@ enum {
/* host flags */
SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY |
- ATA_FLAG_ACPI_SATA,
+ ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA,
+ SIL24_COMMON_LFLAGS = ATA_LFLAG_SKIP_D2H_BSY,
SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
IRQ_STAT_4PORTS = 0xf,
@@ -424,6 +424,7 @@ static const struct ata_port_info sil24_port_info[] = {
{
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
SIL24_FLAG_PCIX_IRQ_WOC,
+ .link_flags = SIL24_COMMON_LFLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5, /* udma0-5 */
@@ -432,6 +433,7 @@ static const struct ata_port_info sil24_port_info[] = {
/* sil_3132 */
{
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
+ .link_flags = SIL24_COMMON_LFLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5, /* udma0-5 */
@@ -440,6 +442,7 @@ static const struct ata_port_info sil24_port_info[] = {
/* sil_3131/sil_3531 */
{
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
+ .link_flags = SIL24_COMMON_LFLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5, /* udma0-5 */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 936cfaa..27840f1 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -156,6 +156,11 @@ enum {
ATA_DEV_ATAPI_UNSUP = 4, /* ATAPI device (unsupported) */
ATA_DEV_NONE = 5, /* no device */
+ /* struct ata_link flags */
+ ATA_LFLAG_HRST_TO_RESUME = (1 << 0), /* hardreset to resume link */
+ ATA_LFLAG_SKIP_D2H_BSY = (1 << 1), /* can't wait for the first D2H
+ * Register FIS clearing BSY */
+
/* struct ata_port flags */
ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */
/* (doesn't imply presence) */
@@ -170,9 +175,6 @@ enum {
ATA_FLAG_PIO_POLLING = (1 << 9), /* use polling PIO if LLD
* doesn't handle PIO interrupts */
ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */
- ATA_FLAG_HRST_TO_RESUME = (1 << 11), /* hardreset to resume phy */
- ATA_FLAG_SKIP_D2H_BSY = (1 << 12), /* can't wait for the first D2H
- * Register FIS clearing BSY */
ATA_FLAG_DEBUGMSG = (1 << 13),
ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */
ATA_FLAG_NO_IORDY = (1 << 16), /* controller lacks iordy */
@@ -516,6 +518,8 @@ struct ata_link {
unsigned int active_tag; /* active tag on this link */
u32 sactive; /* active NCQ commands */
+ unsigned int flags; /* ATA_LFLAG_xxx */
+
unsigned int hw_sata_spd_limit;
unsigned int sata_spd_limit;
unsigned int sata_spd; /* current SATA PHY speed */
@@ -653,6 +657,7 @@ struct ata_port_operations {
struct ata_port_info {
struct scsi_host_template *sht;
unsigned long flags;
+ unsigned long link_flags;
unsigned long pio_mask;
unsigned long mwdma_mask;
unsigned long udma_mask;
--
1.5.0.3
next prev parent reply other threads:[~2007-08-04 8:42 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-04 8:42 [PATCHSET] libata: implement ata_link, take 6 Tejun Heo
2007-08-04 8:42 ` [PATCH 02/14] libata-link: implement and use link/device iterators Tejun Heo
2007-08-04 8:42 ` [PATCH 01/14] libata-link: introduce ata_link Tejun Heo
2007-08-04 8:42 ` [PATCH 04/14] libata-link: linkify EH action helpers Tejun Heo
2007-08-04 8:42 ` [PATCH 03/14] libata-link: linkify PHY-related functions Tejun Heo
2007-08-04 8:42 ` [PATCH 05/14] libata-link: linkify reset Tejun Heo
2007-08-04 8:42 ` Tejun Heo [this message]
2007-08-04 8:42 ` [PATCH 09/14] libata-link: implement ata_link_abort() Tejun Heo
2007-08-04 8:42 ` [PATCH 08/14] libata-link: separate out link initialization functions Tejun Heo
2007-08-04 8:42 ` [PATCH 06/14] libata-link: linkify config/EH related functions Tejun Heo
2007-08-04 8:42 ` [PATCH 10/14] libata-link: add PMP links Tejun Heo
2007-08-04 8:42 ` [PATCH 12/14] libata-link: update EH to deal with " Tejun Heo
2007-08-04 8:42 ` [PATCH 11/14] libata-link: update ata_scsi_error() to handle " Tejun Heo
2007-08-04 8:42 ` [PATCH 14/14] libata-link: update Power Management " Tejun Heo
2007-08-04 8:42 ` [PATCH 13/14] libata-link: update hotplug " Tejun Heo
2007-08-04 13:04 ` [PATCHSET] libata: implement ata_link, take 6 James Bottomley
2007-08-06 6:12 ` Tejun Heo
-- strict thread matches above, loose matches on Subject: below --
2007-08-06 9:36 [PATCHSET 2/4] libata: implement ata_link, take 7 Tejun Heo
2007-08-06 9:36 ` [PATCH 07/14] libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags Tejun Heo
2007-07-16 9:34 [PATCHSET 2/4] libata: implement ata_link, take 5 Tejun Heo
2007-07-16 9:34 ` [PATCH 07/14] libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11862169611569-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).