linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 3/8] libata: factor out ata_eh_schedule_probe()
Date: Fri,  2 Nov 2007 00:51:39 +0900	[thread overview]
Message-ID: <11939323054018-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11939323042554-git-send-email-htejun@gmail.com>

Factor out ata_eh_schedule_probe() from ata_eh_handle_dev_fail() and
ata_eh_recover().  This is to improve maintainability and make future
changes easier.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-eh.c |   37 ++++++++++++++++++++-----------------
 1 files changed, 20 insertions(+), 17 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ded44bd..6280eae 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2418,6 +2418,22 @@ static int ata_eh_skip_recovery(struct ata_link *link)
 	return 1;
 }
 
+static int ata_eh_schedule_probe(struct ata_device *dev)
+{
+	struct ata_eh_context *ehc = &dev->link->eh_context;
+
+	if (!(ehc->i.probe_mask & (1 << dev->devno)) ||
+	    (ehc->did_probe_mask & (1 << dev->devno)))
+		return 0;
+
+	ata_eh_detach_dev(dev);
+	ata_dev_init(dev);
+	ehc->did_probe_mask |= (1 << dev->devno);
+	ehc->i.action |= ATA_EH_SOFTRESET;
+
+	return 1;
+}
+
 static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
 {
 	struct ata_eh_context *ehc = &dev->link->eh_context;
@@ -2449,16 +2465,9 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
 		if (ata_link_offline(dev->link))
 			ata_eh_detach_dev(dev);
 
-		/* probe if requested */
-		if ((ehc->i.probe_mask & (1 << dev->devno)) &&
-		    !(ehc->did_probe_mask & (1 << dev->devno))) {
-			ata_eh_detach_dev(dev);
-			ata_dev_init(dev);
-
+		/* schedule probe if necessary */
+		if (ata_eh_schedule_probe(dev))
 			ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
-			ehc->did_probe_mask |= (1 << dev->devno);
-			ehc->i.action |= ATA_EH_SOFTRESET;
-		}
 
 		return 1;
 	} else {
@@ -2535,14 +2544,8 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 			if (dev->flags & ATA_DFLAG_DETACH)
 				ata_eh_detach_dev(dev);
 
-			if (!ata_dev_enabled(dev) &&
-			    ((ehc->i.probe_mask & (1 << dev->devno)) &&
-			     !(ehc->did_probe_mask & (1 << dev->devno)))) {
-				ata_eh_detach_dev(dev);
-				ata_dev_init(dev);
-				ehc->did_probe_mask |= (1 << dev->devno);
-				ehc->i.action |= ATA_EH_SOFTRESET;
-			}
+			/* schedule probe if necessary */
+			ata_eh_schedule_probe(dev);
 		}
 	}
 
-- 
1.5.2.4


  parent reply	other threads:[~2007-11-01 15:51 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-11-01 15:51 [PATCHSET] libata: update EH speed down logic Tejun Heo
2007-11-01 15:51 ` [PATCH 1/8] libata: rearrange ATA_DFLAG_* Tejun Heo
2007-11-01 15:51 ` [PATCH 2/8] libata: add protocol data transfer tests Tejun Heo
2007-11-01 15:51 ` Tejun Heo [this message]
2007-11-01 15:51 ` [PATCH 4/8] libata: move ata_set_mode() to libata-eh.c Tejun Heo
2007-11-01 15:51 ` [PATCH 5/8] libata: clean up EH speed down implementation Tejun Heo
2007-11-01 15:51 ` [PATCH 6/8] libata: adjust speed down rules Tejun Heo
2007-11-01 15:51 ` [PATCH 7/8] libata: implement ATA_DFLAG_DUBIOUS_XFER Tejun Heo
2007-11-01 15:51 ` [PATCH 8/8] libata: implement fast speed down for unverified data transfer mode Tejun Heo
  -- strict thread matches above, loose matches on Subject: below --
2007-11-05  5:45 [PATCHSET] libata: update EH speed down logic, take #2 Tejun Heo
2007-11-05  5:45 ` [PATCH 3/8] libata: factor out ata_eh_schedule_probe() Tejun Heo
2007-11-05 10:36   ` Bartlomiej Zolnierkiewicz
2007-11-05 12:29     ` Tejun Heo
2007-11-27 10:28 [PATCHSET] libata: improve EH speed down logic, take #3 Tejun Heo
2007-11-27 10:28 ` [PATCH 3/8] libata: factor out ata_eh_schedule_probe() Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11939323054018-git-send-email-htejun@gmail.com \
    --to=htejun@gmail.com \
    --cc=jeff@garzik.org \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).