From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, alan@lxorguk.ukuu.org.uk, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 09/12] libata: implement ata_acpi_init_gtm()
Date: Tue, 6 Nov 2007 14:39:07 +0900 [thread overview]
Message-ID: <11943275512870-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <1194327550227-git-send-email-htejun@gmail.com>
Add dev->__acpi_init_gtm and store initial GTM values on host
initialization. If the field is valid, ata_acpi_init_gtm() returns
pointer to the saved GTM structure; otherwise, NULL. This is to
remember BIOS/firmware programmed initial timing for later use before
reset and mode configuration modify it. The accessor is there to make
building w/o ACPI easy dev->__acpi_init doesn't exist if ACPI is not
enabled.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/libata-acpi.c | 3 +++
include/linux/libata.h | 14 +++++++++++++-
2 files changed, 16 insertions(+), 1 deletions(-)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 7d982c2..31365b3 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -94,6 +94,9 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap)
dev->acpi_handle = acpi_get_child(ap->acpi_handle, i);
}
+
+ if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0)
+ ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
}
static void ata_acpi_handle_hotplug(struct ata_port *ap, struct kobject *kobj,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3b9cebe..bad280f 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -213,6 +213,7 @@ enum {
ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */
ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */
ATA_PFLAG_GTM_VALID = (1 << 19), /* acpi_gtm data valid */
+ ATA_PFLAG_INIT_GTM_VALID = (1 << 20), /* initial gtm data valid */
/* struct ata_queued_cmd flags */
ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */
@@ -659,6 +660,7 @@ struct ata_port {
#ifdef CONFIG_ATA_ACPI
acpi_handle acpi_handle;
struct ata_acpi_gtm acpi_gtm;
+ struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
#endif
u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */
};
@@ -956,13 +958,23 @@ enum {
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
+static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
+{
+ if (ap->pflags & ATA_PFLAG_INIT_GTM_VALID)
+ return &ap->__acpi_init_gtm;
+ return NULL;
+}
extern int ata_acpi_cbl_80wire(struct ata_port *ap);
int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev,
const struct ata_acpi_gtm *gtm);
-
#else
+static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
+{
+ return NULL;
+}
+
static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; }
static inline int ata_acpi_stm(const struct ata_port *ap,
--
1.5.2.4
next prev parent reply other threads:[~2007-11-06 5:39 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-06 5:38 [PATCHSET] libata: update timing and fix pata_amd transfer mode selection Tejun Heo
2007-11-06 5:38 ` [PATCH 01/12] ata_generic: unindent loop in generic_set_mode() Tejun Heo
2007-11-06 5:39 ` [PATCH 02/12] libata: export xfermode / PATA timing related functions Tejun Heo
2007-11-06 5:39 ` [PATCH 03/12] libata: clean up xfermode / PATA timing related stuff Tejun Heo
2007-11-06 5:39 ` [PATCH 04/12] libata: kill ata_id_to_dma_mode() Tejun Heo
2007-11-06 10:49 ` Alan Cox
2007-11-06 11:21 ` Tejun Heo
2007-11-24 1:13 ` Jeff Garzik
2007-11-06 5:39 ` [PATCH 05/12] libata: xfer_mask is unsigned int not unsigned long Tejun Heo
2007-11-06 10:51 ` Alan Cox
2007-11-06 10:59 ` Tejun Heo
2007-11-06 17:53 ` Jeff Garzik
2007-11-07 1:12 ` Tejun Heo
2007-11-24 1:13 ` Jeff Garzik
2007-11-24 1:13 ` Jeff Garzik
2007-11-27 8:42 ` Tejun Heo
2007-11-06 5:39 ` [PATCH 06/12] libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes() Tejun Heo
2007-11-06 10:54 ` Alan Cox
2007-11-06 11:00 ` Tejun Heo
2007-11-24 1:14 ` Jeff Garzik
2007-11-06 5:39 ` [PATCH 07/12] libata: fix ata_acpi_gtm_xfermask() Tejun Heo
2007-11-06 10:55 ` Alan Cox
2007-11-24 1:16 ` Jeff Garzik
2007-11-27 8:40 ` Tejun Heo
2007-11-06 5:39 ` [PATCH 08/12] libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi Tejun Heo
2007-11-06 10:59 ` Alan Cox
2007-11-06 11:09 ` Tejun Heo
2007-11-24 1:17 ` Jeff Garzik
2007-11-06 5:39 ` Tejun Heo [this message]
2007-11-06 5:39 ` [PATCH 10/12] libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask() Tejun Heo
2007-11-06 5:39 ` [PATCH 11/12] libata: add ATA_CBL_PATA_IGN Tejun Heo
2007-11-06 10:59 ` Alan Cox
2007-11-06 11:02 ` Tejun Heo
2007-11-06 11:25 ` Alan Cox
2007-11-06 5:39 ` [PATCH 12/12] pata_amd: update mode selection for NV PATAs Tejun Heo
2007-11-06 10:59 ` Alan Cox
2007-11-23 1:08 ` [PATCHSET] libata: update timing and fix pata_amd transfer mode selection Tejun Heo
2007-11-24 1:18 ` Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2007-11-27 10:43 [PATCHSET] libata: improve timing code and fix pata_amd transfer mode selection, take #2 Tejun Heo
2007-11-27 10:43 ` [PATCH 09/12] libata: implement ata_acpi_init_gtm() Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11943275512870-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).