From: Denis Cheng <crquan@gmail.com>
Cc: linux-ide@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org,
Randy Dunlap <randy.dunlap@oracle.com>
Subject: [PATCH 2/2] ide-scsi: use print_hex_dump from <linux/kernel.h>
Date: Mon, 26 Nov 2007 15:16:13 +0800 [thread overview]
Message-ID: <1196061373-6394-1-git-send-email-crquan@gmail.com> (raw)
these utilities implemented in lib/hexdump.c are more handy, please use this.
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Denis Cheng <crquan@gmail.com>
---
there are still much other private hexdump implementations in the source,
which reinvent the wheel, we can find them through:
$ grep -RsIn hexdump <kernel-src>
...
drivers/scsi/ide-scsi.c | 18 ++++--------------
1 files changed, 4 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 8d0244c..8f3fc1d 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -242,16 +242,6 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign
}
}
-static void hexdump(u8 *x, int len)
-{
- int i;
-
- printk("[ ");
- for (i = 0; i < len; i++)
- printk("%x ", x[i]);
- printk("]\n");
-}
-
static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
@@ -282,7 +272,7 @@ static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_co
pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd;
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: queue cmd = ", drive->name);
- hexdump(pc->c, 6);
+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, pc->c, 6, 1);
}
rq->rq_disk = scsi->disk;
return ide_do_drive_cmd(drive, rq, ide_preempt);
@@ -337,7 +327,7 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer;
if (log) {
printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number);
- hexdump(pc->buffer,16);
+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, pc->buffer, 16, 1);
}
memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE);
kfree(pc->buffer);
@@ -816,10 +806,10 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
- hexdump(cmd->cmnd, cmd->cmd_len);
+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, cmd->cmnd, cmd->cmd_len, 1);
if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) {
printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number);
- hexdump(pc->c, 12);
+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, pc->c, 12, 1);
}
}
--
1.5.3.5
next reply other threads:[~2007-11-26 7:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-26 7:16 Denis Cheng [this message]
[not found] ` <1196062867.8948.25.camel@localhost>
2007-11-26 8:37 ` [PATCH 2/2] ide-scsi: use print_hex_dump from <linux/kernel.h> rae l
2007-11-26 13:25 ` Matthew Wilcox
2007-11-26 16:54 ` Randy Dunlap
2007-11-27 9:31 ` Andrew Morton
2007-11-27 19:34 ` Joe Perches
2007-11-27 20:34 ` Bartlomiej Zolnierkiewicz
2007-11-27 21:02 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1196061373-6394-1-git-send-email-crquan@gmail.com \
--to=crquan@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=randy.dunlap@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).