linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, linux-ide@vger.kernel.org, alan@lxorguk.ukuu.org.uk
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 09/12] libata: implement ata_acpi_init_gtm()
Date: Tue, 27 Nov 2007 19:43:46 +0900	[thread overview]
Message-ID: <11961602313154-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11961602293422-git-send-email-htejun@gmail.com>

Add dev->__acpi_init_gtm and store initial GTM values on host
initialization.  If the field is valid, ata_acpi_init_gtm() returns
pointer to the saved GTM structure; otherwise, NULL.  This is to
remember BIOS/firmware programmed initial timing for later use before
reset and mode configuration modify it.  The accessor is there to make
building w/o ACPI easy dev->__acpi_init doesn't exist if ACPI is not
enabled.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-acpi.c |    3 +++
 include/linux/libata.h    |   14 +++++++++++++-
 2 files changed, 16 insertions(+), 1 deletions(-)

diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index ba6b61c..357f9a2 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -94,6 +94,9 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap)
 
 		dev->acpi_handle = acpi_get_child(ap->acpi_handle, i);
 	}
+
+	if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0)
+		ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
 }
 
 static void ata_acpi_handle_hotplug(struct ata_port *ap, struct kobject *kobj,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index a7b999a..f056b2c 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -213,6 +213,7 @@ enum {
 	ATA_PFLAG_SUSPENDED	= (1 << 17), /* port is suspended (power) */
 	ATA_PFLAG_PM_PENDING	= (1 << 18), /* PM operation pending */
 	ATA_PFLAG_GTM_VALID	= (1 << 19), /* acpi_gtm data valid */
+	ATA_PFLAG_INIT_GTM_VALID = (1 << 20), /* initial gtm data valid */
 
 	/* struct ata_queued_cmd flags */
 	ATA_QCFLAG_ACTIVE	= (1 << 0), /* cmd not yet ack'd to scsi lyer */
@@ -662,6 +663,7 @@ struct ata_port {
 #ifdef CONFIG_ATA_ACPI
 	acpi_handle		acpi_handle;
 	struct ata_acpi_gtm	acpi_gtm;
+	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
 #endif
 	u8			sector_buf[ATA_SECT_SIZE]; /* owned by EH */
 };
@@ -958,13 +960,23 @@ enum {
 
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
+static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
+{
+	if (ap->pflags & ATA_PFLAG_INIT_GTM_VALID)
+		return &ap->__acpi_init_gtm;
+	return NULL;
+}
 extern int ata_acpi_cbl_80wire(struct ata_port *ap);
 int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
 int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
 unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev,
 				    const struct ata_acpi_gtm *gtm);
-
 #else
+static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
+{
+	return NULL;
+}
+
 static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; }
 
 static inline int ata_acpi_stm(const struct ata_port *ap,
-- 
1.5.2.4


  parent reply	other threads:[~2007-11-27 10:44 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-11-27 10:43 [PATCHSET] libata: improve timing code and fix pata_amd transfer mode selection, take #2 Tejun Heo
2007-11-27 10:43 ` [PATCH 01/12] ata_generic: unindent loop in generic_set_mode() Tejun Heo
2007-12-01 23:19   ` Jeff Garzik
2007-11-27 10:43 ` [PATCH 02/12] libata: export xfermode / PATA timing related functions Tejun Heo
2007-11-27 10:43 ` [PATCH 03/12] libata: clean up xfermode / PATA timing related stuff Tejun Heo
2007-11-27 10:43 ` [PATCH 04/12] libata: kill ata_id_to_dma_mode() Tejun Heo
2007-11-27 11:30   ` Alan Cox
2007-11-27 13:52     ` Tejun Heo
2007-12-01 23:22   ` Jeff Garzik
2007-11-27 10:43 ` [PATCH 05/12] libata: xfer_mask is unsigned long not unsigned int Tejun Heo
2007-11-27 10:43 ` [PATCH 06/12] libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes() Tejun Heo
2007-11-27 10:43 ` [PATCH 07/12] libata: fix ata_acpi_gtm_xfermask() Tejun Heo
2007-11-27 10:43 ` [PATCH 08/12] libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi Tejun Heo
2007-11-27 10:43 ` Tejun Heo [this message]
2007-11-27 10:43 ` [PATCH 10/12] libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask() Tejun Heo
2007-11-27 10:43 ` [PATCH 11/12] libata: add ATA_CBL_PATA_IGN Tejun Heo
2007-11-27 10:43 ` [PATCH 12/12] pata_amd: update mode selection for NV PATAs Tejun Heo
2007-11-27 11:23   ` Alan Cox
2007-12-01 23:22   ` Jeff Garzik
2007-12-02 14:15     ` Alan Cox
  -- strict thread matches above, loose matches on Subject: below --
2007-11-06  5:38 [PATCHSET] libata: update timing and fix pata_amd transfer mode selection Tejun Heo
2007-11-06  5:39 ` [PATCH 09/12] libata: implement ata_acpi_init_gtm() Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11961602313154-git-send-email-htejun@gmail.com \
    --to=htejun@gmail.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=jeff@garzik.org \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).