From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, hancockr@shaw.ca, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 9/9] libata-acpi: implement _GTF command filtering and filter out LOCK commands
Date: Fri, 14 Dec 2007 15:15:41 +0900 [thread overview]
Message-ID: <11976129432558-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11976129411285-git-send-email-htejun@gmail.com>
Implement _GTF command filtering which can be controlled by
libata.acpi_filter kernel parameter and filter LOCK commands using it.
DCO FREEZE LOCK, SECURITY FREEZE LOCK and SET MAX [FREEZE] LOCK are
filtered by default.
Note that detecting SET MAX LOCK requires looking at the previous
command. This adds a bit to code complexity.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/libata-acpi.c | 148 +++++++++++++++++++++++++++++++-------------
1 files changed, 104 insertions(+), 44 deletions(-)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 1981112..b487268 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -6,6 +6,7 @@
* Copyright (C) 2006 Randy Dunlap
*/
+#include <linux/module.h>
#include <linux/ata.h>
#include <linux/delay.h>
#include <linux/device.h>
@@ -25,6 +26,16 @@
#include <acpi/acmacros.h>
#include <acpi/actypes.h>
+enum {
+ ATA_ACPI_FILTER_LOCK = 1 << 0,
+
+ ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_LOCK,
+};
+
+static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
+module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=lock/freeze lock)");
+
#define NO_PORT_MULT 0xffff
#define SATA_ADR(root, pmp) (((root) << 16) | (pmp))
@@ -428,6 +439,51 @@ int ata_acpi_cbl_80wire(struct ata_port *ap)
EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire);
+static void ata_acpi_gtf_to_tf(struct ata_device *dev,
+ const struct ata_acpi_gtf *gtf,
+ struct ata_taskfile *tf)
+{
+ ata_tf_init(dev, tf);
+
+ tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf->protocol = ATA_PROT_NODATA;
+ tf->feature = gtf->tf[0]; /* 0x1f1 */
+ tf->nsect = gtf->tf[1]; /* 0x1f2 */
+ tf->lbal = gtf->tf[2]; /* 0x1f3 */
+ tf->lbam = gtf->tf[3]; /* 0x1f4 */
+ tf->lbah = gtf->tf[4]; /* 0x1f5 */
+ tf->device = gtf->tf[5]; /* 0x1f6 */
+ tf->command = gtf->tf[6]; /* 0x1f7 */
+}
+
+static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
+ const struct ata_taskfile *ptf)
+{
+ if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) {
+ /* BIOS writers, sorry but we don't wanna lock
+ * features unless the user explicitly said so.
+ */
+
+ /* DEVICE CONFIGURATION FREEZE LOCK */
+ if (tf->command == ATA_CMD_CONF_OVERLAY &&
+ tf->feature == ATA_DCO_FREEZE_LOCK)
+ return 1;
+
+ /* SECURITY FREEZE LOCK */
+ if (tf->command == ATA_CMD_SEC_FREEZE_LOCK)
+ return 1;
+
+ /* SET MAX LOCK and SET MAX FREEZE LOCK */
+ if ((!ptf || ptf->command != ATA_CMD_READ_NATIVE_MAX) &&
+ tf->command == ATA_CMD_SET_MAX &&
+ (tf->feature == ATA_SET_MAX_LOCK ||
+ tf->feature == ATA_SET_MAX_FREEZE_LOCK))
+ return 1;
+ }
+
+ return 0;
+}
+
/**
* ata_acpi_run_tf - send taskfile registers to host controller
* @dev: target ATA device
@@ -448,13 +504,15 @@ EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire);
* EH context.
*
* RETURNS:
- * 1 if command is executed successfully. 0 if ignored or rejected,
- * -errno on other errors.
+ * 1 if command is executed successfully. 0 if ignored, rejected or
+ * filtered out, -errno on other errors.
*/
static int ata_acpi_run_tf(struct ata_device *dev,
- const struct ata_acpi_gtf *gtf)
+ const struct ata_acpi_gtf *gtf,
+ const struct ata_acpi_gtf *prev_gtf)
{
- struct ata_taskfile tf, rtf;
+ struct ata_taskfile *pptf = NULL;
+ struct ata_taskfile tf, ptf, rtf;
unsigned int err_mask;
const char *level;
char msg[60];
@@ -465,44 +523,44 @@ static int ata_acpi_run_tf(struct ata_device *dev,
&& (gtf->tf[6] == 0))
return 0;
- ata_tf_init(dev, &tf);
-
- /* convert gtf to tf */
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
- tf.protocol = ATA_PROT_NODATA;
- tf.feature = gtf->tf[0]; /* 0x1f1 */
- tf.nsect = gtf->tf[1]; /* 0x1f2 */
- tf.lbal = gtf->tf[2]; /* 0x1f3 */
- tf.lbam = gtf->tf[3]; /* 0x1f4 */
- tf.lbah = gtf->tf[4]; /* 0x1f5 */
- tf.device = gtf->tf[5]; /* 0x1f6 */
- tf.command = gtf->tf[6]; /* 0x1f7 */
-
- rtf = tf;
- err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0, 0);
-
- switch (err_mask) {
- case 0:
- level = KERN_DEBUG;
- snprintf(msg, sizeof(msg), "succeeded");
- rc = 1;
- break;
-
- case AC_ERR_DEV:
+ ata_acpi_gtf_to_tf(dev, gtf, &tf);
+ if (prev_gtf) {
+ ata_acpi_gtf_to_tf(dev, prev_gtf, &ptf);
+ pptf = &ptf;
+ }
+
+ if (!ata_acpi_filter_tf(&tf, pptf)) {
+ rtf = tf;
+ err_mask = ata_exec_internal(dev, &rtf, NULL,
+ DMA_NONE, NULL, 0, 0);
+
+ switch (err_mask) {
+ case 0:
+ level = KERN_DEBUG;
+ snprintf(msg, sizeof(msg), "succeeded");
+ rc = 1;
+ break;
+
+ case AC_ERR_DEV:
+ level = KERN_INFO;
+ snprintf(msg, sizeof(msg),
+ "rejected by device (Stat=0x%02x Err=0x%02x)",
+ rtf.command, rtf.feature);
+ rc = 0;
+ break;
+
+ default:
+ level = KERN_ERR;
+ snprintf(msg, sizeof(msg),
+ "failed (Emask=0x%x Stat=0x%02x Err=0x%02x)",
+ err_mask, rtf.command, rtf.feature);
+ rc = -EIO;
+ break;
+ }
+ } else {
level = KERN_INFO;
- snprintf(msg, sizeof(msg),
- "rejected by device (Stat=0x%02x Err=0x%02x)",
- rtf.command, rtf.feature);
+ snprintf(msg, sizeof(msg), "filtered out");
rc = 0;
- break;
-
- default:
- level = KERN_ERR;
- snprintf(msg, sizeof(msg),
- "failed (Emask=0x%x Stat=0x%02x Err=0x%02x)",
- err_mask, rtf.command, rtf.feature);
- rc = -EIO;
- break;
}
ata_dev_printk(dev, level,
@@ -529,7 +587,7 @@ static int ata_acpi_run_tf(struct ata_device *dev,
*/
static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed)
{
- struct ata_acpi_gtf *gtf = NULL;
+ struct ata_acpi_gtf *gtf = NULL, *pgtf = NULL;
void *ptr_to_free = NULL;
int gtf_count, i, rc;
@@ -540,12 +598,14 @@ static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed)
gtf_count = rc;
/* execute them */
- for (i = 0; i < gtf_count; i++) {
- rc = ata_acpi_run_tf(dev, gtf++);
+ for (i = 0; i < gtf_count; i++, gtf++) {
+ rc = ata_acpi_run_tf(dev, gtf, pgtf);
if (rc < 0)
break;
- if (rc)
+ if (rc) {
(*nr_executed)++;
+ pgtf = gtf;
+ }
}
kfree(ptr_to_free);
--
1.5.2.4
next prev parent reply other threads:[~2007-12-14 6:15 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-14 6:15 [PATCHSET #upstram-fixes] libata-acpi: improve ACPI corner case handling Tejun Heo
2007-12-14 6:15 ` [PATCH 1/9] libata: drop const from struct ata_port param on ata_acpi_gtm/stm() Tejun Heo
2007-12-14 6:15 ` [PATCH 2/9] libata: update ata_*_printk() macros such that level can be a variable Tejun Heo
2007-12-14 6:15 ` [PATCH 3/9] libata: add more opcodes to ata.h Tejun Heo
2007-12-14 6:15 ` [PATCH 4/9] libata: implement ata_acpi_init_gtm() Tejun Heo
2007-12-14 6:15 ` [PATCH 5/9] libata: use init_gtm in ata_acpi_cbl_80wire() Tejun Heo
2007-12-14 6:15 ` [PATCH 6/9] libata-acpi: improve ACPI disabling Tejun Heo
2007-12-14 6:15 ` [PATCH 7/9] libata-acpi: improve _GTF execution error handling and reporting Tejun Heo
2007-12-14 14:12 ` Mark Lord
2007-12-14 14:15 ` Tejun Heo
2007-12-14 14:45 ` Mark Lord
2007-12-14 14:50 ` Tejun Heo
2007-12-14 14:54 ` Mark Lord
2007-12-14 6:15 ` [PATCH 8/9] libata-acpi: ignore _GTM failure during suspend Tejun Heo
2007-12-14 6:15 ` Tejun Heo [this message]
2007-12-14 7:56 ` [PATCHSET #upstram-fixes] libata-acpi: improve ACPI corner case handling Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11976129432558-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=hancockr@shaw.ca \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).