From: Borislav Petkov <bbpetkov@yahoo.de>
To: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: bzolnier@gmail.com, Borislav Petkov <bbpetkov@yahoo.de>
Subject: [RESEND PATCH 01/10] move ide-floppy historical changelog to Documentation/ide/ChangeLog.ide-floppy.1996-2002;
Date: Thu, 3 Jan 2008 14:20:00 +0100 [thread overview]
Message-ID: <1199366409-26016-2-git-send-email-bbpetkov@yahoo.de> (raw)
In-Reply-To: <1199366409-26016-1-git-send-email-bbpetkov@yahoo.de>
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
---
Documentation/ide/ChangeLog.ide-floppy.1996-2002 | 64 ++++++++++++++++++++
drivers/ide/ide-floppy.c | 69 +---------------------
2 files changed, 67 insertions(+), 66 deletions(-)
diff --git a/Documentation/ide/ChangeLog.ide-floppy.1996-2002 b/Documentation/ide/ChangeLog.ide-floppy.1996-2002
new file mode 100644
index 0000000..70166f3
--- /dev/null
+++ b/Documentation/ide/ChangeLog.ide-floppy.1996-2002
@@ -0,0 +1,64 @@
+/*
+ * Many thanks to Lode Leroy <Lode.Leroy@www.ibase.be>, who tested so many
+ * ALPHA patches to this driver on an EASYSTOR LS-120 ATAPI floppy drive.
+ *
+ * Ver 0.1 Oct 17 96 Initial test version, mostly based on ide-tape.c.
+ * Ver 0.2 Oct 31 96 Minor changes.
+ * Ver 0.3 Dec 2 96 Fixed error recovery bug.
+ * Ver 0.4 Jan 26 97 Add support for the HDIO_GETGEO ioctl.
+ * Ver 0.5 Feb 21 97 Add partitions support.
+ * Use the minimum of the LBA and CHS capacities.
+ * Avoid hwgroup->rq == NULL on the last irq.
+ * Fix potential null dereferencing with DEBUG_LOG.
+ * Ver 0.8 Dec 7 97 Increase irq timeout from 10 to 50 seconds.
+ * Add media write-protect detection.
+ * Issue START command only if TEST UNIT READY fails.
+ * Add work-around for IOMEGA ZIP revision 21.D.
+ * Remove idefloppy_get_capabilities().
+ * Ver 0.9 Jul 4 99 Fix a bug which might have caused the number of
+ * bytes requested on each interrupt to be zero.
+ * Thanks to <shanos@es.co.nz> for pointing this out.
+ * Ver 0.9.sv Jan 6 01 Sam Varshavchik <mrsam@courier-mta.com>
+ * Implement low level formatting. Reimplemented
+ * IDEFLOPPY_CAPABILITIES_PAGE, since we need the srfp
+ * bit. My LS-120 drive barfs on
+ * IDEFLOPPY_CAPABILITIES_PAGE, but maybe it's just me.
+ * Compromise by not reporting a failure to get this
+ * mode page. Implemented four IOCTLs in order to
+ * implement formatting. IOCTls begin with 0x4600,
+ * 0x46 is 'F' as in Format.
+ * Jan 9 01 Userland option to select format verify.
+ * Added PC_SUPPRESS_ERROR flag - some idefloppy drives
+ * do not implement IDEFLOPPY_CAPABILITIES_PAGE, and
+ * return a sense error. Suppress error reporting in
+ * this particular case in order to avoid spurious
+ * errors in syslog. The culprit is
+ * idefloppy_get_capability_page(), so move it to
+ * idefloppy_begin_format() so that it's not used
+ * unless absolutely necessary.
+ * If drive does not support format progress indication
+ * monitor the dsc bit in the status register.
+ * Also, O_NDELAY on open will allow the device to be
+ * opened without a disk available. This can be used to
+ * open an unformatted disk, or get the device capacity.
+ * Ver 0.91 Dec 11 99 Added IOMEGA Clik! drive support by
+ * <paul@paulbristow.net>
+ * Ver 0.92 Oct 22 00 Paul Bristow became official maintainer for this
+ * driver. Included Powerbook internal zip kludge.
+ * Ver 0.93 Oct 24 00 Fixed bugs for Clik! drive
+ * no disk on insert and disk change now works
+ * Ver 0.94 Oct 27 00 Tidied up to remove strstr(Clik) everywhere
+ * Ver 0.95 Nov 7 00 Brought across to kernel 2.4
+ * Ver 0.96 Jan 7 01 Actually in line with release version of 2.4.0
+ * including set_bit patch from Rusty Russell
+ * Ver 0.97 Jul 22 01 Merge 0.91-0.96 onto 0.9.sv for ac series
+ * Ver 0.97.sv Aug 3 01 Backported from 2.4.7-ac3
+ * Ver 0.98 Oct 26 01 Split idefloppy_transfer_pc into two pieces to
+ * fix a lost interrupt problem. It appears the busy
+ * bit was being deasserted by my IOMEGA ATAPI ZIP 100
+ * drive before the drive was actually ready.
+ * Ver 0.98a Oct 29 01 Expose delay value so we can play.
+ * Ver 0.99 Feb 24 02 Remove duplicate code, modify clik! detection code
+ * to support new PocketZip drives
+ */
+
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 04a3578..785fbde 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -1,12 +1,8 @@
/*
- * linux/drivers/ide/ide-floppy.c Version 0.99 Feb 24 2002
+ * IDE ATAPI floppy driver.
*
* Copyright (C) 1996 - 1999 Gadi Oxman <gadio@netvision.net.il>
* Copyright (C) 2000 - 2002 Paul Bristow <paul@paulbristow.net>
- */
-
-/*
- * IDE ATAPI floppy driver.
*
* The driver currently doesn't have any fancy features, just the bare
* minimum read/write support.
@@ -17,67 +13,8 @@
* Iomega Zip 100/250
* Iomega PC Card Clik!/PocketZip
*
- * Many thanks to Lode Leroy <Lode.Leroy@www.ibase.be>, who tested so many
- * ALPHA patches to this driver on an EASYSTOR LS-120 ATAPI floppy drive.
- *
- * Ver 0.1 Oct 17 96 Initial test version, mostly based on ide-tape.c.
- * Ver 0.2 Oct 31 96 Minor changes.
- * Ver 0.3 Dec 2 96 Fixed error recovery bug.
- * Ver 0.4 Jan 26 97 Add support for the HDIO_GETGEO ioctl.
- * Ver 0.5 Feb 21 97 Add partitions support.
- * Use the minimum of the LBA and CHS capacities.
- * Avoid hwgroup->rq == NULL on the last irq.
- * Fix potential null dereferencing with DEBUG_LOG.
- * Ver 0.8 Dec 7 97 Increase irq timeout from 10 to 50 seconds.
- * Add media write-protect detection.
- * Issue START command only if TEST UNIT READY fails.
- * Add work-around for IOMEGA ZIP revision 21.D.
- * Remove idefloppy_get_capabilities().
- * Ver 0.9 Jul 4 99 Fix a bug which might have caused the number of
- * bytes requested on each interrupt to be zero.
- * Thanks to <shanos@es.co.nz> for pointing this out.
- * Ver 0.9.sv Jan 6 01 Sam Varshavchik <mrsam@courier-mta.com>
- * Implement low level formatting. Reimplemented
- * IDEFLOPPY_CAPABILITIES_PAGE, since we need the srfp
- * bit. My LS-120 drive barfs on
- * IDEFLOPPY_CAPABILITIES_PAGE, but maybe it's just me.
- * Compromise by not reporting a failure to get this
- * mode page. Implemented four IOCTLs in order to
- * implement formatting. IOCTls begin with 0x4600,
- * 0x46 is 'F' as in Format.
- * Jan 9 01 Userland option to select format verify.
- * Added PC_SUPPRESS_ERROR flag - some idefloppy drives
- * do not implement IDEFLOPPY_CAPABILITIES_PAGE, and
- * return a sense error. Suppress error reporting in
- * this particular case in order to avoid spurious
- * errors in syslog. The culprit is
- * idefloppy_get_capability_page(), so move it to
- * idefloppy_begin_format() so that it's not used
- * unless absolutely necessary.
- * If drive does not support format progress indication
- * monitor the dsc bit in the status register.
- * Also, O_NDELAY on open will allow the device to be
- * opened without a disk available. This can be used to
- * open an unformatted disk, or get the device capacity.
- * Ver 0.91 Dec 11 99 Added IOMEGA Clik! drive support by
- * <paul@paulbristow.net>
- * Ver 0.92 Oct 22 00 Paul Bristow became official maintainer for this
- * driver. Included Powerbook internal zip kludge.
- * Ver 0.93 Oct 24 00 Fixed bugs for Clik! drive
- * no disk on insert and disk change now works
- * Ver 0.94 Oct 27 00 Tidied up to remove strstr(Clik) everywhere
- * Ver 0.95 Nov 7 00 Brought across to kernel 2.4
- * Ver 0.96 Jan 7 01 Actually in line with release version of 2.4.0
- * including set_bit patch from Rusty Russell
- * Ver 0.97 Jul 22 01 Merge 0.91-0.96 onto 0.9.sv for ac series
- * Ver 0.97.sv Aug 3 01 Backported from 2.4.7-ac3
- * Ver 0.98 Oct 26 01 Split idefloppy_transfer_pc into two pieces to
- * fix a lost interrupt problem. It appears the busy
- * bit was being deasserted by my IOMEGA ATAPI ZIP 100
- * drive before the drive was actually ready.
- * Ver 0.98a Oct 29 01 Expose delay value so we can play.
- * Ver 0.99 Feb 24 02 Remove duplicate code, modify clik! detection code
- * to support new PocketZip drives
+ * For a historical changelog see
+ * Documentation/ide/ChangeLog.ide-floppy.1996-2002
*/
#define IDEFLOPPY_VERSION "0.99.newide"
--
1.5.3.7
next prev parent reply other threads:[~2008-01-03 13:23 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-03 13:19 [RESEND PATCH 0/10] ide-floppy redux p1 Borislav Petkov
2008-01-03 13:20 ` Borislav Petkov [this message]
2008-01-03 13:20 ` [RESEND PATCH 02/10] ide-floppy: move ide-floppy struct and macro defs into its own header. While at it Borislav Petkov
2008-01-03 13:20 ` [RESEND PATCH 03/10] ide-floppy: convert to generic packet commands Borislav Petkov
2008-01-03 13:20 ` [RESEND PATCH 04/10] ide-floppy: cleanup debugging macros Borislav Petkov
2008-01-03 13:20 ` [RESEND PATCH 05/10] ide-floppy: factor out ioctl handlers from idefloppy_ioctl() Borislav Petkov
2008-01-03 13:20 ` [RESEND PATCH 06/10] ide-floppy: report DMA handling in idefloppy_pc_intr() properly Borislav Petkov
2008-01-03 13:20 ` [RESEND PATCH 07/10] ide-floppy: remove unnecessary ->handler != NULL check Borislav Petkov
2008-01-03 13:20 ` [RESEND PATCH 08/10] ide-floppy: mv idefloppy_{should_,}report_error Borislav Petkov
2008-01-03 13:20 ` [RESEND PATCH 09/10] ide-floppy: use test_bit wrappers for testing flags Borislav Petkov
2008-01-03 13:20 ` [RESEND PATCH 10/10] ide-floppy: replace ntoh{s,l} and hton{s,l} calls with the generic byteorder macros Borislav Petkov
2008-01-04 1:29 ` Bartlomiej Zolnierkiewicz
2008-01-05 16:10 ` [RESEND PATCH 09/10] ide-floppy: use test_bit wrappers for testing flags Bartlomiej Zolnierkiewicz
2008-01-05 15:54 ` [RESEND PATCH 08/10] ide-floppy: mv idefloppy_{should_,}report_error Bartlomiej Zolnierkiewicz
2008-01-04 1:24 ` [RESEND PATCH 07/10] ide-floppy: remove unnecessary ->handler != NULL check Bartlomiej Zolnierkiewicz
2008-01-05 15:46 ` [RESEND PATCH 06/10] ide-floppy: report DMA handling in idefloppy_pc_intr() properly Bartlomiej Zolnierkiewicz
2008-01-05 21:45 ` Borislav Petkov
2008-01-06 15:21 ` Bartlomiej Zolnierkiewicz
2008-01-05 15:12 ` [RESEND PATCH 05/10] ide-floppy: factor out ioctl handlers from idefloppy_ioctl() Bartlomiej Zolnierkiewicz
2008-01-04 1:19 ` [RESEND PATCH 04/10] ide-floppy: cleanup debugging macros Bartlomiej Zolnierkiewicz
2008-01-04 1:04 ` [RESEND PATCH 03/10] ide-floppy: convert to generic packet commands Bartlomiej Zolnierkiewicz
2008-01-04 22:49 ` [RESEND PATCH 02/10] ide-floppy: move ide-floppy struct and macro defs into its own header. While at it Bartlomiej Zolnierkiewicz
2008-01-05 12:45 ` Borislav Petkov
2008-01-05 13:15 ` Bartlomiej Zolnierkiewicz
2008-01-04 0:36 ` [RESEND PATCH 01/10] move ide-floppy historical changelog to Documentation/ide/ChangeLog.ide-floppy.1996-2002; Bartlomiej Zolnierkiewicz
2008-01-04 0:14 ` [RESEND PATCH 0/10] ide-floppy redux p1 Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1199366409-26016-2-git-send-email-bbpetkov@yahoo.de \
--to=bbpetkov@yahoo.de \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).