(unknown),

(unknown),

[Borislav Petkov]

Hi Bart,

here are the pending ide-tape patches reworked which incorporate all review
points raised so far. Several new patches are appended to the original series
which i thought would be reasonable to sumbit along with the others. Also,
i've applied "ide-tape: dump gcw fields on error in idetape_identify_device()"
which is #12 and which you can simply ignore. Furthermore, #32 from the original
series got split up into the different logical changes it dealt with, as you
requested.


 Documentation/feature-removal-schedule.txt |   14 +-
 drivers/ide/ide-tape.c                     | 2764 +++++++++++++---------------
 2 files changed, 1325 insertions(+), 1453 deletions(-)

[PATCH 01/22] ide-tape: refactor the debug logging facility

[Borislav Petkov]

Teach the debug logging macro to differentiate between log levels based on the
type of debug level enabled specifically instead of a threshold-based one.
Thus, convert tape->debug_level to a bitmask that is written to over /proc.

Also,
- cleanup and simplify the debug macro thus removing a lot of code lines,
- get rid of unused debug levels,
- adjust the loglevel at several places where it was simply missing (e.g.
  idetape_chrdev_open())
- move the tape ptr initialization up in idetape_chrdev_open() so that we can
  use it in the debug_log macro earlier in the function.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |  344 +++++++++++++++++-------------------------------
 1 files changed, 122 insertions(+), 222 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 4168a06..442d71c 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -45,6 +45,32 @@
 #include <asm/unaligned.h>
 #include <linux/mtio.h>
 
+enum {
+	/* output errors only */
+	DBG_ERR =		(1 << 0),
+	/* output all sense key/asc */
+	DBG_SENSE =		(1 << 1),
+	/* info regarding all chrdev-related procedures */
+	DBG_CHRDEV =		(1 << 2),
+	/* all remaining procedures */
+	DBG_PROCS =		(1 << 3),
+	/* buffer alloc info (pc_stack & rq_stack) */
+	DBG_PCRQ_STACK =	(1 << 4),
+};
+
+/* define to see debug info */
+#define IDETAPE_DEBUG_LOG		0
+
+#if IDETAPE_DEBUG_LOG
+#define debug_log(lvl, fmt, args...)			\
+{							\
+	if (tape->debug_mask & lvl)			\
+	printk(KERN_INFO "ide-tape: " fmt, ## args);	\
+}
+#else
+#define debug_log(lvl, fmt, args...) do {} while (0)
+#endif
+
 /**************************** Tunable parameters *****************************/
 
 
@@ -68,23 +94,6 @@
 #define IDETAPE_INCREASE_STAGES_RATE	 20
 
 /*
- *	The following are used to debug the driver:
- *
- *	Setting IDETAPE_DEBUG_LOG to 1 will log driver flow control.s
- *
- *	Setting them to 0 will restore normal operation mode:
- *
- *		1.	Disable logging normal successful operations.
- *		2.	Disable self-sanity checks.
- *		3.	Errors will still be logged, of course.
- *
- *	All the #if DEBUG code will be removed some day, when the driver
- *	is verified to be stable enough. This will make it much more
- *	esthetic.
- */
-#define IDETAPE_DEBUG_LOG		0
-
-/*
  *	After each failed packet command we issue a request sense command
  *	and retry the packet command IDETAPE_MAX_PC_RETRIES times.
  *
@@ -451,18 +460,7 @@ typedef struct ide_tape_obj {
 	unsigned long uncontrolled_previous_head_time;
 	int restart_speed_control_req;
 
-        /*
-         * Debug_level determines amount of debugging output;
-         * can be changed using /proc/ide/hdx/settings
-         * 0 : almost no debugging output
-         * 1 : 0+output errors only
-         * 2 : 1+output all sensekey/asc
-         * 3 : 2+follow all chrdev related procedures
-         * 4 : 3+follow all procedures
-         * 5 : 4+include pc_stack rq_stack info
-         * 6 : 5+USE_COUNT updates
-         */
-         int debug_level; 
+	u32 debug_mask;
 } idetape_tape_t;
 
 static DEFINE_MUTEX(idetape_ref_mutex);
@@ -716,11 +714,8 @@ static idetape_pc_t *idetape_next_pc_storage (ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 5)
-		printk(KERN_INFO "ide-tape: pc_stack_index=%d\n",
-			tape->pc_stack_index);
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index);
+
 	if (tape->pc_stack_index == IDETAPE_PC_STACK)
 		tape->pc_stack_index=0;
 	return (&tape->pc_stack[tape->pc_stack_index++]);
@@ -743,11 +738,8 @@ static struct request *idetape_next_rq_storage (ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 5)
-		printk(KERN_INFO "ide-tape: rq_stack_index=%d\n",
-			tape->rq_stack_index);
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index);
+
 	if (tape->rq_stack_index == IDETAPE_PC_STACK)
 		tape->rq_stack_index=0;
 	return (&tape->rq_stack[tape->rq_stack_index++]);
@@ -780,17 +772,9 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 	tape->sense_key = sense[2] & 0xF;
 	tape->asc       = sense[12];
 	tape->ascq      = sense[13];
-#if IDETAPE_DEBUG_LOG
-	/*
-	 * Without debugging, we only log an error if we decided to give up
-	 * retrying.
-	 */
-	if (tape->debug_level >= 1)
-		printk(KERN_INFO "ide-tape: pc = %x, sense key = %x, "
-			"asc = %x, ascq = %x\n",
-			pc->c[0], tape->sense_key,
-			tape->asc, tape->ascq);
-#endif /* IDETAPE_DEBUG_LOG */
+
+	debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n",
+		 pc->c[0], tape->sense_key, tape->asc, tape->ascq);
 
 	/* Correct pc->actually_transferred by asking the tape.	 */
 	if (test_bit(PC_DMA_ERROR, &pc->flags)) {
@@ -843,12 +827,11 @@ static void idetape_activate_next_stage(ide_drive_t *drive)
 	idetape_stage_t *stage = tape->next_stage;
 	struct request *rq = &stage->rq;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 4)
-		printk(KERN_INFO "ide-tape: Reached idetape_active_next_stage\n");
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_PROCS, "Enter %s\n", __func__);
+
 	if (stage == NULL) {
-		printk(KERN_ERR "ide-tape: bug: Trying to activate a non existing stage\n");
+		printk(KERN_ERR "ide-tape: bug: Trying to activate a non"
+				" existing stage\n");
 		return;
 	}
 
@@ -871,11 +854,8 @@ static void idetape_increase_max_pipeline_stages (ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	int increase = (tape->max_pipeline - tape->min_pipeline) / 10;
-	
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 4)
-		printk (KERN_INFO "ide-tape: Reached idetape_increase_max_pipeline_stages\n");
-#endif /* IDETAPE_DEBUG_LOG */
+
+	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	tape->max_stages += max(increase, 1);
 	tape->max_stages = max(tape->max_stages, tape->min_pipeline);
@@ -920,17 +900,16 @@ static void idetape_remove_stage_head (ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_stage_t *stage;
-	
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 4)
-		printk(KERN_INFO "ide-tape: Reached idetape_remove_stage_head\n");
-#endif /* IDETAPE_DEBUG_LOG */
+
+	debug_log(DBG_PROCS, "Enter %s\n", __func__);
+
 	if (tape->first_stage == NULL) {
 		printk(KERN_ERR "ide-tape: bug: tape->first_stage is NULL\n");
 		return;
 	}
 	if (tape->active_stage == tape->first_stage) {
-		printk(KERN_ERR "ide-tape: bug: Trying to free our active pipeline stage\n");
+		printk(KERN_ERR "ide-tape: bug: Trying to free our active "
+				"pipeline stage\n");
 		return;
 	}
 	stage = tape->first_stage;
@@ -957,10 +936,8 @@ static void idetape_abort_pipeline(ide_drive_t *drive,
 	idetape_stage_t *stage = new_last_stage->next;
 	idetape_stage_t *nstage;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 4)
-		printk(KERN_INFO "ide-tape: %s: idetape_abort_pipeline called\n", tape->name);
-#endif
+	debug_log(DBG_PROCS, "%s: Enter %s\n", tape->name, __func__);
+
 	while (stage) {
 		nstage = stage->next;
 		idetape_kfree_stage(tape, stage);
@@ -987,10 +964,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 	int remove_stage = 0;
 	idetape_stage_t *active_stage;
 
-#if IDETAPE_DEBUG_LOG
-        if (tape->debug_level >= 4)
-	printk(KERN_INFO "ide-tape: Reached idetape_end_request\n");
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	switch (uptodate) {
 		case 0:	error = IDETAPE_ERROR_GENERAL; break;
@@ -1055,10 +1029,8 @@ static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 4)
-		printk(KERN_INFO "ide-tape: Reached idetape_request_sense_callback\n");
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_PROCS, "Enter %s\n", __func__);
+
 	if (!tape->pc->error) {
 		idetape_analyze_error(drive, tape->pc->buffer);
 		idetape_end_request(drive, 1, 0);
@@ -1143,10 +1115,8 @@ static void idetape_postpone_request (ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 4)
-		printk(KERN_INFO "ide-tape: idetape_postpone_request\n");
-#endif
+	debug_log(DBG_PROCS, "Enter %s\n", __func__);
+
 	tape->postponed_rq = HWGROUP(drive)->rq;
 	ide_stall_queue(drive, tape->dsc_polling_frequency);
 }
@@ -1171,11 +1141,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
 	u16 bcount;
 	u8 stat, ireason;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 4)
-		printk(KERN_INFO "ide-tape: Reached idetape_pc_intr "
-				"interrupt handler\n");
-#endif /* IDETAPE_DEBUG_LOG */	
+	debug_log(DBG_PROCS, "Enter %s - interrupt handler\n", __func__);
 
 	/* Clear the interrupt */
 	stat = hwif->INB(IDE_STATUS_REG);
@@ -1208,20 +1174,16 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
 			pc->actually_transferred = pc->request_transfer;
 			idetape_update_buffers(pc);
 		}
-#if IDETAPE_DEBUG_LOG
-		if (tape->debug_level >= 4)
-			printk(KERN_INFO "ide-tape: DMA finished\n");
-#endif /* IDETAPE_DEBUG_LOG */
+		debug_log(DBG_PROCS, "DMA finished\n");
+
 	}
 
 	/* No more interrupts */
 	if ((stat & DRQ_STAT) == 0) {
-#if IDETAPE_DEBUG_LOG
-		if (tape->debug_level >= 2)
-			printk(KERN_INFO "ide-tape: Packet command completed, %d bytes transferred\n", pc->actually_transferred);
-#endif /* IDETAPE_DEBUG_LOG */
-		clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
+		debug_log(DBG_SENSE, "Packet command completed, %d bytes"
+				" transferred\n", pc->actually_transferred);
 
+		clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
 		local_irq_enable();
 
 #if SIMULATE_ERRORS
@@ -1236,19 +1198,15 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
 			stat &= ~ERR_STAT;
 		if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
 			/* Error detected */
-#if IDETAPE_DEBUG_LOG
-			if (tape->debug_level >= 1)
-				printk(KERN_INFO "ide-tape: %s: I/O error\n",
-					tape->name);
-#endif /* IDETAPE_DEBUG_LOG */
+			debug_log(DBG_ERR, "%s: I/O error\n", tape->name);
+
 			if (pc->c[0] == REQUEST_SENSE) {
 				printk(KERN_ERR "ide-tape: I/O error in request sense command\n");
 				return ide_do_reset(drive);
 			}
-#if IDETAPE_DEBUG_LOG
-			if (tape->debug_level >= 1)
-				printk(KERN_INFO "ide-tape: [cmd %x]: check condition\n", pc->c[0]);
-#endif
+			debug_log(DBG_ERR, "[cmd %x]: check condition\n",
+					pc->c[0]);
+
 			/* Retry operation */
 			return idetape_retry_pc(drive);
 		}
@@ -1303,10 +1261,9 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
 				ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
 				return ide_started;
 			}
-#if IDETAPE_DEBUG_LOG
-			if (tape->debug_level >= 2)
-				printk(KERN_NOTICE "ide-tape: The tape wants to send us more data than expected - allowing transfer\n");
-#endif /* IDETAPE_DEBUG_LOG */
+			debug_log(DBG_SENSE, "The tape wants to send us more "
+				"data than expected - allowing transfer\n");
+
 		}
 	}
 	if (test_bit(PC_WRITING, &pc->flags)) {
@@ -1327,11 +1284,10 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
 	/* Update the current position */
 	pc->actually_transferred += bcount;
 	pc->current_position += bcount;
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 2)
-		printk(KERN_INFO "ide-tape: [cmd %x] transferred %d bytes "
-				 "on that interrupt\n", pc->c[0], bcount);
-#endif
+
+	debug_log(DBG_SENSE, "[cmd %x] transferred %d bytes on that intr.\n",
+			pc->c[0], bcount);
+
 	/* And set the interrupt handler again */
 	ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
 	return ide_started;
@@ -1464,10 +1420,7 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape
 		tape->failed_pc = NULL;
 		return pc->callback(drive);
 	}
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 2)
-		printk(KERN_INFO "ide-tape: Retry number - %d, cmd = %02X\n", pc->retries, pc->c[0]);
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
 
 	pc->retries++;
 	/* We haven't transferred any data yet */
@@ -1505,11 +1458,8 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape
 static ide_startstop_t idetape_pc_callback (ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 4)
-		printk(KERN_INFO "ide-tape: Reached idetape_pc_callback\n");
-#endif /* IDETAPE_DEBUG_LOG */
+
+	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	idetape_end_request(drive, tape->pc->error ? 0 : 1, 0);
 	return ide_stopped;
@@ -1640,11 +1590,7 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive)
 		tape->avg_size = 0;
 		tape->avg_time = jiffies;
 	}
-
-#if IDETAPE_DEBUG_LOG	
-	if (tape->debug_level >= 4)
-		printk(KERN_INFO "ide-tape: Reached idetape_rw_callback\n");
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	tape->first_frame_position += blocks;
 	rq->current_nr_sectors -= blocks;
@@ -1720,12 +1666,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	struct request *postponed_rq = tape->postponed_rq;
 	u8 stat;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 2)
-		printk(KERN_INFO "ide-tape: sector: %ld, "
-			"nr_sectors: %ld, current_nr_sectors: %d\n",
+	debug_log(DBG_SENSE, "sector: %ld, nr_sectors: %ld,"
+			" current_nr_sectors: %d\n",
 			rq->sector, rq->nr_sectors, rq->current_nr_sectors);
-#endif /* IDETAPE_DEBUG_LOG */
 
 	if (!blk_special_request(rq)) {
 		/*
@@ -1916,10 +1859,7 @@ static idetape_stage_t *idetape_kmalloc_stage (idetape_tape_t *tape)
 {
 	idetape_stage_t *cache_stage = tape->cache_stage;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 4)
-		printk(KERN_INFO "ide-tape: Reached idetape_kmalloc_stage\n");
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	if (tape->nr_stages >= tape->max_stages)
 		return NULL;
@@ -2018,11 +1958,9 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	unsigned long flags;
-	
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 4)
-		printk (KERN_INFO "ide-tape: Reached idetape_add_stage_tail\n");
-#endif /* IDETAPE_DEBUG_LOG */
+
+	debug_log(DBG_PROCS, "Enter %s\n", __func__);
+
 	spin_lock_irqsave(&tape->spinlock, flags);
 	stage->next = NULL;
 	if (tape->last_stage != NULL)
@@ -2065,29 +2003,22 @@ static ide_startstop_t idetape_read_position_callback (ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_read_position_result_t *result;
-	
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 4)
-		printk(KERN_INFO "ide-tape: Reached idetape_read_position_callback\n");
-#endif /* IDETAPE_DEBUG_LOG */
+
+	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	if (!tape->pc->error) {
 		result = (idetape_read_position_result_t *) tape->pc->buffer;
-#if IDETAPE_DEBUG_LOG
-		if (tape->debug_level >= 2)
-			printk(KERN_INFO "ide-tape: BOP - %s\n",result->bop ? "Yes":"No");
-		if (tape->debug_level >= 2)
-			printk(KERN_INFO "ide-tape: EOP - %s\n",result->eop ? "Yes":"No");
-#endif /* IDETAPE_DEBUG_LOG */
+		debug_log(DBG_SENSE, "BOP - %s\n", result->bop ? "Yes" : "No");
+		debug_log(DBG_SENSE, "EOP - %s\n", result->eop ? "Yes" : "No");
+
 		if (result->bpu) {
 			printk(KERN_INFO "ide-tape: Block location is unknown to the tape\n");
 			clear_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
 			idetape_end_request(drive, 0, 0);
 		} else {
-#if IDETAPE_DEBUG_LOG
-			if (tape->debug_level >= 2)
-				printk(KERN_INFO "ide-tape: Block Location - %u\n", ntohl(result->first_block));
-#endif /* IDETAPE_DEBUG_LOG */
+			debug_log(DBG_SENSE, "Block Location - %u\n",
+					ntohl(result->first_block));
+
 			tape->partition = result->partition;
 			tape->first_frame_position = ntohl(result->first_block);
 			tape->last_frame_position = ntohl(result->last_block);
@@ -2227,10 +2158,7 @@ static int idetape_read_position (ide_drive_t *drive)
 	idetape_pc_t pc;
 	int position;
 
-#if IDETAPE_DEBUG_LOG
-        if (tape->debug_level >= 4)
-		printk(KERN_INFO "ide-tape: Reached idetape_read_position\n");
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	idetape_create_read_position_cmd(&pc);
 	if (idetape_queue_pc_tail(drive, &pc))
@@ -2364,12 +2292,11 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct
 	idetape_tape_t *tape = drive->driver_data;
 	struct request rq;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 2)
-		printk(KERN_INFO "ide-tape: idetape_queue_rw_tail: cmd=%d\n",cmd);
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
+
 	if (idetape_pipeline_active(tape)) {
-		printk(KERN_ERR "ide-tape: bug: the pipeline is active in idetape_queue_rw_tail\n");
+		printk(KERN_ERR "ide-tape: bug: the pipeline is active in %s\n",
+				__func__);
 		return (0);
 	}
 
@@ -2473,10 +2400,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 	unsigned long flags;
 	struct request *rq;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 3)
-		printk(KERN_INFO "ide-tape: Reached idetape_add_chrdev_write_request\n");
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
 
      	/*
      	 *	Attempt to allocate a new stage.
@@ -2714,10 +2638,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 	struct request *rq_ptr;
 	int bytes_read;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 4)
-		printk(KERN_INFO "ide-tape: Reached idetape_add_chrdev_read_request, %d blocks\n", blocks);
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
 
 	/*
 	 * If we are at a filemark, return a read length of 0
@@ -2812,12 +2733,11 @@ static int idetape_rewind_tape (ide_drive_t *drive)
 {
 	int retval;
 	idetape_pc_t pc;
-#if IDETAPE_DEBUG_LOG
-	idetape_tape_t *tape = drive->driver_data;
-	if (tape->debug_level >= 2)
-		printk(KERN_INFO "ide-tape: Reached idetape_rewind_tape\n");
-#endif /* IDETAPE_DEBUG_LOG */	
-	
+	idetape_tape_t *tape;
+	tape = drive->driver_data;
+
+	debug_log(DBG_SENSE, "Enter %s\n", __func__);
+
 	idetape_create_rewind_cmd(drive, &pc);
 	retval = idetape_queue_pc_tail(drive, &pc);
 	if (retval)
@@ -2848,10 +2768,8 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l
 		int nr_stages;
 	} config;
 
-#if IDETAPE_DEBUG_LOG	
-	if (tape->debug_level >= 4)
-		printk(KERN_INFO "ide-tape: Reached idetape_blkdev_ioctl\n");
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_PROCS, "Enter %s\n", __func__);
+
 	switch (cmd) {
 		case 0x0340:
 			if (copy_from_user(&config, argp, sizeof(config)))
@@ -2984,10 +2902,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
 	ssize_t ret = 0;
 	u16 ctl = *(u16 *)&tape->caps[12];
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 3)
-		printk(KERN_INFO "ide-tape: Reached idetape_chrdev_read, count %Zd\n", count);
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
 	if (tape->chrdev_direction != idetape_direction_read) {
 		if (test_bit(IDETAPE_DETECT_BS, &tape->flags))
@@ -3029,10 +2944,8 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
 	}
 finish:
 	if (!actually_read && test_bit(IDETAPE_FILEMARK, &tape->flags)) {
-#if IDETAPE_DEBUG_LOG
-		if (tape->debug_level >= 2)
-			printk(KERN_INFO "ide-tape: %s: spacing over filemark\n", tape->name);
-#endif
+		debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
+
 		idetape_space_over_filemarks(drive, MTFSF, 1);
 		return 0;
 	}
@@ -3053,11 +2966,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
 	if (tape->write_prot)
 		return -EACCES;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 3)
-		printk(KERN_INFO "ide-tape: Reached idetape_chrdev_write, "
-			"count %Zd\n", count);
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
 	/* Initialize write operation */
 	if (tape->chrdev_direction != idetape_direction_write) {
@@ -3167,11 +3076,8 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 	idetape_pc_t pc;
 	int i,retval;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 1)
-		printk(KERN_INFO "ide-tape: Handling MTIOCTOP ioctl: "
-			"mt_op=%d, mt_count=%d\n", mt_op, mt_count);
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n",
+			mt_op, mt_count);
 	/*
 	 *	Commands which need our pipelined read-ahead stages.
 	 */
@@ -3291,11 +3197,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
 	int block_offset = 0, position = tape->first_frame_position;
 	void __user *argp = (void __user *)arg;
 
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 3)
-		printk(KERN_INFO "ide-tape: Reached idetape_chrdev_ioctl, "
-			"cmd=%u\n", cmd);
-#endif /* IDETAPE_DEBUG_LOG */
+	debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd);
 
 	tape->restart_speed_control_req = 1;
 	if (tape->chrdev_direction == idetape_direction_write) {
@@ -3371,6 +3273,15 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
 	idetape_pc_t pc;
 	int retval;
 
+	if (i >= MAX_HWIFS * MAX_DRIVES)
+		return -ENXIO;
+
+	tape = ide_tape_chrdev_get(i);
+	if (!tape)
+		return -ENXIO;
+
+	debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
+
 	/*
 	 * We really want to do nonseekable_open(inode, filp); here, but some
 	 * versions of tar incorrectly call lseek on tapes and bail out if that
@@ -3378,16 +3289,6 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
 	 */
 	filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
 
-#if IDETAPE_DEBUG_LOG
-	printk(KERN_INFO "ide-tape: Reached idetape_chrdev_open\n");
-#endif /* IDETAPE_DEBUG_LOG */
-	
-	if (i >= MAX_HWIFS * MAX_DRIVES)
-		return -ENXIO;
-
-	if (!(tape = ide_tape_chrdev_get(i)))
-		return -ENXIO;
-
 	drive = tape->drive;
 
 	filp->private_data = tape;
@@ -3478,10 +3379,8 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp)
 
 	lock_kernel();
 	tape = drive->driver_data;
-#if IDETAPE_DEBUG_LOG
-	if (tape->debug_level >= 3)
-		printk(KERN_INFO "ide-tape: Reached idetape_chrdev_release\n");
-#endif /* IDETAPE_DEBUG_LOG */
+
+	debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
 
 	if (tape->chrdev_direction == idetape_direction_write)
 		idetape_write_release(drive, minor);
@@ -3648,7 +3547,8 @@ static void idetape_add_settings (ide_drive_t *drive)
 	ide_add_setting(drive,	"pipeline_head_speed_c",SETTING_READ,	TYPE_INT,	0,			0xffff,			1,				1,		&tape->controlled_pipeline_head_speed,	NULL);
 	ide_add_setting(drive,	"pipeline_head_speed_u",SETTING_READ,	TYPE_INT,	0,			0xffff,			1,				1,		&tape->uncontrolled_pipeline_head_speed,NULL);
 	ide_add_setting(drive,	"avg_speed",		SETTING_READ,	TYPE_INT,	0,			0xffff,			1,				1,		&tape->avg_speed,			NULL);
-	ide_add_setting(drive,	"debug_level",		SETTING_RW,	TYPE_INT,	0,			0xffff,			1,				1,		&tape->debug_level,			NULL);
+	ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1,
+			1, &tape->debug_mask, NULL);
 }
 #else
 static inline void idetape_add_settings(ide_drive_t *drive) { ; }
-- 
1.5.3.7

[PATCH 02/22] ide-tape: remove struct idetape_read_position_result_t

[Borislav Petkov]

There should be no functional changes resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |   49 +++++++++++++++++------------------------------
 1 files changed, 18 insertions(+), 31 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 442d71c..c8c57ab 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -571,24 +571,6 @@ struct idetape_id_gcw {
 	unsigned protocol		:2;	/* Protocol type */
 };
 
-/*
- *	READ POSITION packet command - Data Format (From Table 6-57)
- */
-typedef struct {
-	unsigned	reserved0_10	:2;	/* Reserved */
-	unsigned	bpu		:1;	/* Block Position Unknown */	
-	unsigned	reserved0_543	:3;	/* Reserved */
-	unsigned	eop		:1;	/* End Of Partition */
-	unsigned	bop		:1;	/* Beginning Of Partition */
-	u8		partition;		/* Partition Number */
-	u8		reserved2, reserved3;	/* Reserved */
-	u32		first_block;		/* First Block Location */
-	u32		last_block;		/* Last Block Location (Optional) */
-	u8		reserved12;		/* Reserved */
-	u8		blocks_in_buffer[3];	/* Blocks In Buffer - (Optional) */
-	u32		bytes_in_buffer;	/* Bytes In Buffer (Optional) */
-} idetape_read_position_result_t;
-
 /* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
 #define IDETAPE_BLOCK_DESCRIPTOR	0
 #define	IDETAPE_CAPABILITIES_PAGE	0x2a
@@ -1999,30 +1981,35 @@ static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq)
 	spin_lock_irq(&tape->spinlock);
 }
 
-static ide_startstop_t idetape_read_position_callback (ide_drive_t *drive)
+static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	idetape_read_position_result_t *result;
+	u8 *readpos = tape->pc->buffer;
 
 	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	if (!tape->pc->error) {
-		result = (idetape_read_position_result_t *) tape->pc->buffer;
-		debug_log(DBG_SENSE, "BOP - %s\n", result->bop ? "Yes" : "No");
-		debug_log(DBG_SENSE, "EOP - %s\n", result->eop ? "Yes" : "No");
+		debug_log(DBG_SENSE, "BOP - %s\n",
+				!!(readpos[0] & 0x80) ? "Yes" : "No");
+		debug_log(DBG_SENSE, "EOP - %s\n",
+				!!(readpos[0] & 0x40) ? "Yes" : "No");
+
+		if (!!(readpos[0] & 0x4)) {
+			printk(KERN_INFO "ide-tape: Block location is unknown"
+					"to the tape\n");
 
-		if (result->bpu) {
-			printk(KERN_INFO "ide-tape: Block location is unknown to the tape\n");
 			clear_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
 			idetape_end_request(drive, 0, 0);
 		} else {
 			debug_log(DBG_SENSE, "Block Location - %u\n",
-					ntohl(result->first_block));
-
-			tape->partition = result->partition;
-			tape->first_frame_position = ntohl(result->first_block);
-			tape->last_frame_position = ntohl(result->last_block);
-			tape->blocks_in_buffer = result->blocks_in_buffer[2];
+					be32_to_cpu(*(u32 *)&readpos[4]));
+
+			tape->partition = readpos[1];
+			tape->first_frame_position =
+				be32_to_cpu(*(u32 *)&readpos[4]);
+			tape->last_frame_position =
+				be32_to_cpu(*(u32 *)&readpos[8]);
+			tape->blocks_in_buffer = readpos[15];
 			set_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
 			idetape_end_request(drive, 1, 0);
 		}
-- 
1.5.3.7

Re: [PATCH 02/22] ide-tape: remove struct idetape_read_position_result_t

[Bartlomiej Zolnierkiewicz]

On Monday 04 February 2008, Borislav Petkov wrote:
> There should be no functional changes resulting from this patch.
> 
> Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
> ---
>  drivers/ide/ide-tape.c |   49 +++++++++++++++++------------------------------
>  1 files changed, 18 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
> index 442d71c..c8c57ab 100644
> --- a/drivers/ide/ide-tape.c
> +++ b/drivers/ide/ide-tape.c

[...]

>  	if (!tape->pc->error) {
> -		result = (idetape_read_position_result_t *) tape->pc->buffer;
> -		debug_log(DBG_SENSE, "BOP - %s\n", result->bop ? "Yes" : "No");
> -		debug_log(DBG_SENSE, "EOP - %s\n", result->eop ? "Yes" : "No");
> +		debug_log(DBG_SENSE, "BOP - %s\n",
> +				!!(readpos[0] & 0x80) ? "Yes" : "No");
> +		debug_log(DBG_SENSE, "EOP - %s\n",
> +				!!(readpos[0] & 0x40) ? "Yes" : "No");
> +
> +		if (!!(readpos[0] & 0x4)) {
> +			printk(KERN_INFO "ide-tape: Block location is unknown"
> +					"to the tape\n");

I removed needless "!!" while merging the patch.

[PATCH 03/22] ide-tape: remove unreachable code chunk

[Borislav Petkov]

tape->speed_control is set to 1 in idetape_setup(), but, in calculate_speeds()
its value is tested for being 0, 1, or 2. Remove the if-branches where
tape->speed_control != 1 since they are never executed. Also, rename
calculate_speeds() by adding driver's prefix as is with the other function names.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |   22 ++++++++++------------
 1 files changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index c8c57ab..b15dd17 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -87,7 +87,8 @@ enum {
  *	the optimum value or until we reach MAX.
  *
  *	Setting the following parameter to 0 is illegal: the pipelined mode
- *	cannot be disabled (calculate_speeds() divides by tape->max_stages.)
+ *	cannot be disabled (idetape_calculate_speeds() divides by
+ *	tape->max_stages.)
  */
 #define IDETAPE_MIN_PIPELINE_STAGES	  1
 #define IDETAPE_MAX_PIPELINE_STAGES	400
@@ -1475,10 +1476,9 @@ static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code)
 	pc->callback = &idetape_pc_callback;
 }
 
-static void calculate_speeds(ide_drive_t *drive)
+static void idetape_calculate_speeds(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	int full = 125, empty = 75;
 
 	if (time_after(jiffies, tape->controlled_pipeline_head_time + 120 * HZ)) {
 		tape->controlled_previous_pipeline_head = tape->controlled_last_pipeline_head;
@@ -1505,22 +1505,20 @@ static void calculate_speeds(ide_drive_t *drive)
 		}
 	}
 	tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed, tape->controlled_pipeline_head_speed);
-	if (tape->speed_control == 0) {
-		tape->max_insert_speed = 5000;
-	} else if (tape->speed_control == 1) {
+
+	if (tape->speed_control == 1) {
 		if (tape->nr_pending_stages >= tape->max_stages / 2)
 			tape->max_insert_speed = tape->pipeline_head_speed +
 				(1100 - tape->pipeline_head_speed) * 2 * (tape->nr_pending_stages - tape->max_stages / 2) / tape->max_stages;
 		else
 			tape->max_insert_speed = 500 +
 				(tape->pipeline_head_speed - 500) * 2 * tape->nr_pending_stages / tape->max_stages;
+
 		if (tape->nr_pending_stages >= tape->max_stages * 99 / 100)
 			tape->max_insert_speed = 5000;
-	} else if (tape->speed_control == 2) {
-		tape->max_insert_speed = tape->pipeline_head_speed * empty / 100 +
-			(tape->pipeline_head_speed * full / 100 - tape->pipeline_head_speed * empty / 100) * tape->nr_pending_stages / tape->max_stages;
 	} else
 		tape->max_insert_speed = tape->speed_control;
+
 	tape->max_insert_speed = max(tape->max_insert_speed, 500);
 }
 
@@ -1697,7 +1695,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 		tape->measure_insert_time = 1;
 	if (time_after(jiffies, tape->insert_time))
 		tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
-	calculate_speeds(drive);
+	idetape_calculate_speeds(drive);
 	if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) &&
 	    (stat & SEEK_STAT) == 0) {
 		if (postponed_rq == NULL) {
@@ -2419,7 +2417,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 	idetape_switch_buffers(tape, new_stage);
 	idetape_add_stage_tail(drive, new_stage);
 	tape->pipeline_head++;
-	calculate_speeds(drive);
+	idetape_calculate_speeds(drive);
 
 	/*
 	 *	Estimate whether the tape has stopped writing by checking
@@ -2659,7 +2657,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 		idetape_remove_stage_head(drive);
 		spin_unlock_irqrestore(&tape->spinlock, flags);
 		tape->pipeline_head++;
-		calculate_speeds(drive);
+		idetape_calculate_speeds(drive);
 	}
 	if (bytes_read > blocks * tape->tape_block_size) {
 		printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n");
-- 
1.5.3.7

[PATCH 04/22] ide-tape: simplify code branching in the interrupt handler

[Borislav Petkov]

... by adding a new typedef function pointer idetape_io_buf in order to call
the proper buffer i/o handler depending on the data direction.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |   55 +++++++++++++++++++++++++----------------------
 1 files changed, 29 insertions(+), 26 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index b15dd17..2857965 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1105,18 +1105,22 @@ static void idetape_postpone_request (ide_drive_t *drive)
 }
 
 /*
- *	idetape_pc_intr is the usual interrupt handler which will be called
- *	during a packet command. We will transfer some of the data (as
- *	requested by the drive) and will re-point interrupt handler to us.
- *	When data transfer is finished, we will act according to the
- *	algorithm described before idetape_issue_packet_command.
- *
+ * This is the usual interrupt handler which will be called during a packet
+ * command. We will transfer some of the data (as requested by the drive) and
+ * will re-point interrupt handler to us. When data transfer is finished, we
+ * will act according to the algorithm described before
+ * idetape_issue_packet_command.
  */
-static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
+
+typedef void idetape_io_buf(ide_drive_t *, idetape_pc_t *, unsigned int);
+
+static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_pc_t *pc = tape->pc;
+	xfer_func_t *xferfunc;
+	idetape_io_buf *iobuf;
 	unsigned int temp;
 #if SIMULATE_ERRORS
 	static int error_sim_count = 0;
@@ -1184,7 +1188,8 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
 			debug_log(DBG_ERR, "%s: I/O error\n", tape->name);
 
 			if (pc->c[0] == REQUEST_SENSE) {
-				printk(KERN_ERR "ide-tape: I/O error in request sense command\n");
+				printk(KERN_ERR "ide-tape: I/O error in request"
+						" sense command\n");
 				return ide_do_reset(drive);
 			}
 			debug_log(DBG_ERR, "[cmd %x]: check condition\n",
@@ -1223,7 +1228,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
 	ireason = hwif->INB(IDE_IREASON_REG);
 
 	if (ireason & CD) {
-		printk(KERN_ERR "ide-tape: CoD != 0 in idetape_pc_intr\n");
+		printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__);
 		return ide_do_reset(drive);
 	}
 	if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) {
@@ -1239,31 +1244,29 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
 		temp = pc->actually_transferred + bcount;
 		if (temp > pc->request_transfer) {
 			if (temp > pc->buffer_size) {
-				printk(KERN_ERR "ide-tape: The tape wants to send us more data than expected - discarding data\n");
+				printk(KERN_ERR "ide-tape: The tape wants to "
+					"send us more data than expected "
+					"- discarding data\n");
 				idetape_discard_data(drive, bcount);
-				ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
+				ide_set_handler(drive, &idetape_pc_intr,
+						IDETAPE_WAIT_CMD, NULL);
 				return ide_started;
 			}
 			debug_log(DBG_SENSE, "The tape wants to send us more "
 				"data than expected - allowing transfer\n");
-
 		}
-	}
-	if (test_bit(PC_WRITING, &pc->flags)) {
-		if (pc->bh != NULL)
-			idetape_output_buffers(drive, pc, bcount);
-		else
-			/* Write the current buffer */
-			hwif->atapi_output_bytes(drive, pc->current_position,
-						 bcount);
+		iobuf = &idetape_input_buffers;
+		xferfunc = hwif->atapi_input_bytes;
 	} else {
-		if (pc->bh != NULL)
-			idetape_input_buffers(drive, pc, bcount);
-		else
-			/* Read the current buffer */
-			hwif->atapi_input_bytes(drive, pc->current_position,
-						bcount);
+		iobuf = &idetape_output_buffers;
+		xferfunc = hwif->atapi_output_bytes;
 	}
+
+	if (pc->bh)
+		iobuf(drive, pc, bcount);
+	else
+		xferfunc(drive, pc->current_position, bcount);
+
 	/* Update the current position */
 	pc->actually_transferred += bcount;
 	pc->current_position += bcount;
-- 
1.5.3.7

[PATCH 05/22] ide-tape: remove typedef idetape_chrdev_direction_t

[Borislav Petkov]

.. and replace it with plain enums.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |   62 ++++++++++++++++++++++++-----------------------
 1 files changed, 32 insertions(+), 30 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 2857965..e0e8184 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -184,11 +184,13 @@ enum {
 /*
  *	For general magnetic tape device compatibility.
  */
-typedef enum {
-	idetape_direction_none,
-	idetape_direction_read,
-	idetape_direction_write
-} idetape_chrdev_direction_t;
+
+/* tape directions */
+enum {
+	IDETAPE_DIR_NONE  = (1 << 0),
+	IDETAPE_DIR_READ  = (1 << 1),
+	IDETAPE_DIR_WRITE = (1 << 2),
+};
 
 struct idetape_bh {
 	u32 b_size;
@@ -324,7 +326,7 @@ typedef struct ide_tape_obj {
 	/* device name */
 	char name[4];
 	/* Current character device data transfer direction */
-	idetape_chrdev_direction_t chrdev_direction;
+	u8 chrdev_dir;
 
 	/*
 	 *	Device information
@@ -1916,7 +1918,7 @@ static void idetape_init_merge_stage (idetape_tape_t *tape)
 	struct idetape_bh *bh = tape->merge_stage->bh;
 	
 	tape->bh = bh;
-	if (tape->chrdev_direction == idetape_direction_write)
+	if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
 		atomic_set(&bh->b_count, 0);
 	else {
 		tape->b_data = bh->b_data;
@@ -2187,7 +2189,7 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
 	unsigned long flags;
 	int cnt;
 
-	if (tape->chrdev_direction != idetape_direction_read)
+	if (tape->chrdev_dir != IDETAPE_DIR_READ)
 		return 0;
 
 	/* Remove merge stage. */
@@ -2202,7 +2204,7 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
 
 	/* Clear pipeline flags. */
 	clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
-	tape->chrdev_direction = idetape_direction_none;
+	tape->chrdev_dir = IDETAPE_DIR_NONE;
 
 	/* Remove pipeline stages. */
 	if (tape->first_stage == NULL)
@@ -2242,7 +2244,7 @@ static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 par
 	int retval;
 	idetape_pc_t pc;
 
-	if (tape->chrdev_direction == idetape_direction_read)
+	if (tape->chrdev_dir == IDETAPE_DIR_READ)
 		__idetape_discard_read_pipeline(drive);
 	idetape_wait_ready(drive, 60 * 5 * HZ);
 	idetape_create_locate_cmd(drive, &pc, block, partition, skip);
@@ -2469,7 +2471,7 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
 	int blocks, min;
 	struct idetape_bh *bh;
 
-	if (tape->chrdev_direction != idetape_direction_write) {
+	if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
 		printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline, but we are not writing.\n");
 		return;
 	}
@@ -2512,7 +2514,7 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
 		tape->merge_stage = NULL;
 	}
 	clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
-	tape->chrdev_direction = idetape_direction_none;
+	tape->chrdev_dir = IDETAPE_DIR_NONE;
 
 	/*
 	 *	On the next backup, perform the feedback loop again.
@@ -2556,8 +2558,8 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages)
 	u16 blocks = *(u16 *)&tape->caps[12];
 
 	/* Initialize read operation */
-	if (tape->chrdev_direction != idetape_direction_read) {
-		if (tape->chrdev_direction == idetape_direction_write) {
+	if (tape->chrdev_dir != IDETAPE_DIR_READ) {
+		if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
 			idetape_empty_write_pipeline(drive);
 			idetape_flush_tape_buffers(drive);
 		}
@@ -2567,7 +2569,7 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages)
 		}
 		if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
 			return -ENOMEM;
-		tape->chrdev_direction = idetape_direction_read;
+		tape->chrdev_dir = IDETAPE_DIR_READ;
 
 		/*
 		 *	Issue a read 0 command to ensure that DSC handshake
@@ -2581,7 +2583,7 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages)
 			if (bytes_read < 0) {
 				__idetape_kfree_stage(tape->merge_stage);
 				tape->merge_stage = NULL;
-				tape->chrdev_direction = idetape_direction_none;
+				tape->chrdev_dir = IDETAPE_DIR_NONE;
 				return bytes_read;
 			}
 		}
@@ -2802,7 +2804,7 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
 		mt_count = - mt_count;
 	}
 
-	if (tape->chrdev_direction == idetape_direction_read) {
+	if (tape->chrdev_dir == IDETAPE_DIR_READ) {
 		/*
 		 *	We have a read-ahead buffer. Scan it for crossed
 		 *	filemarks.
@@ -2892,7 +2894,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
 
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
-	if (tape->chrdev_direction != idetape_direction_read) {
+	if (tape->chrdev_dir != IDETAPE_DIR_READ) {
 		if (test_bit(IDETAPE_DETECT_BS, &tape->flags))
 			if (count > tape->tape_block_size &&
 			    (count % tape->tape_block_size) == 0)
@@ -2957,8 +2959,8 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
 	/* Initialize write operation */
-	if (tape->chrdev_direction != idetape_direction_write) {
-		if (tape->chrdev_direction == idetape_direction_read)
+	if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
+		if (tape->chrdev_dir == IDETAPE_DIR_READ)
 			idetape_discard_read_pipeline(drive, 1);
 		if (tape->merge_stage || tape->merge_stage_size) {
 			printk(KERN_ERR "ide-tape: merge_stage_size "
@@ -2967,7 +2969,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
 		}
 		if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
 			return -ENOMEM;
-		tape->chrdev_direction = idetape_direction_write;
+		tape->chrdev_dir = IDETAPE_DIR_WRITE;
 		idetape_init_merge_stage(tape);
 
 		/*
@@ -2982,7 +2984,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
 			if (retval < 0) {
 				__idetape_kfree_stage(tape->merge_stage);
 				tape->merge_stage = NULL;
-				tape->chrdev_direction = idetape_direction_none;
+				tape->chrdev_dir = IDETAPE_DIR_NONE;
 				return retval;
 			}
 		}
@@ -3188,7 +3190,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
 	debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd);
 
 	tape->restart_speed_control_req = 1;
-	if (tape->chrdev_direction == idetape_direction_write) {
+	if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
 		idetape_empty_write_pipeline(drive);
 		idetape_flush_tape_buffers(drive);
 	}
@@ -3219,7 +3221,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
 				return -EFAULT;
 			return 0;
 		default:
-			if (tape->chrdev_direction == idetape_direction_read)
+			if (tape->chrdev_dir == IDETAPE_DIR_READ)
 				idetape_discard_read_pipeline(drive, 1);
 			return idetape_blkdev_ioctl(drive, cmd, arg);
 	}
@@ -3297,7 +3299,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
 	if (!test_bit(IDETAPE_ADDRESS_VALID, &tape->flags))
 		(void)idetape_rewind_tape(drive);
 
-	if (tape->chrdev_direction != idetape_direction_read)
+	if (tape->chrdev_dir != IDETAPE_DIR_READ)
 		clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
 
 	/* Read block size and write protect status from drive. */
@@ -3322,7 +3324,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
 	/*
 	 * Lock the tape drive door so user can't eject.
 	 */
-	if (tape->chrdev_direction == idetape_direction_none) {
+	if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
 		if (idetape_create_prevent_cmd(drive, &pc, 1)) {
 			if (!idetape_queue_pc_tail(drive, &pc)) {
 				if (tape->door_locked != DOOR_EXPLICITLY_LOCKED)
@@ -3370,9 +3372,9 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp)
 
 	debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
 
-	if (tape->chrdev_direction == idetape_direction_write)
+	if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
 		idetape_write_release(drive, minor);
-	if (tape->chrdev_direction == idetape_direction_read) {
+	if (tape->chrdev_dir == IDETAPE_DIR_READ) {
 		if (minor < 128)
 			idetape_discard_read_pipeline(drive, 1);
 		else
@@ -3384,7 +3386,7 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp)
 	}
 	if (minor < 128 && test_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags))
 		(void) idetape_rewind_tape(drive);
-	if (tape->chrdev_direction == idetape_direction_none) {
+	if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
 		if (tape->door_locked == DOOR_LOCKED) {
 			if (idetape_create_prevent_cmd(drive, &pc, 0)) {
 				if (!idetape_queue_pc_tail(drive, &pc))
@@ -3577,7 +3579,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	tape->name[0] = 'h';
 	tape->name[1] = 't';
 	tape->name[2] = '0' + minor;
-	tape->chrdev_direction = idetape_direction_none;
+	tape->chrdev_dir = IDETAPE_DIR_NONE;
 	tape->pc = tape->pc_stack;
 	tape->max_insert_speed = 10000;
 	tape->speed_control = 1;
-- 
1.5.3.7

[PATCH 06/22] ide-tape: struct idetape_tape_t: remove unused members

[Borislav Petkov]

- last_frame_position: only being written to once
- firmware_revision, product_id, vendor_id: used once, remove from struct
  idetape_tape_t and deal with them locally
- firmware_revision_num: only written to once
- tape_still_time_begin: completely unused
- tape_still_time: never written to; remove corresponding code chunk
- uncontrolled_last_pipeline_head: only once written to
- blocks_in_buffer: only written to

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |   45 +++++++++++----------------------------------
 1 files changed, 11 insertions(+), 34 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index e0e8184..126e8a9 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -311,8 +311,6 @@ typedef struct ide_tape_obj {
 	u8 partition;
 	/* Current block */
 	unsigned int first_frame_position;
-	unsigned int last_frame_position;
-	unsigned int blocks_in_buffer;
 
 	/*
 	 *	Last error information
@@ -399,11 +397,6 @@ typedef struct ide_tape_obj {
 	int avg_size;
 	int avg_speed;
 
-	char vendor_id[10];
-	char product_id[18];
-	char firmware_revision[6];
-	int firmware_revision_num;
-
 	/* the door is currently locked */
 	int door_locked;
 	/* the tape hardware is write protected */
@@ -441,12 +434,6 @@ typedef struct ide_tape_obj {
 	int measure_insert_time;
 
 	/*
-	 * Measure tape still time, in milliseconds
-	 */
-	unsigned long tape_still_time_begin;
-	int tape_still_time;
-
-	/*
 	 * Speed regulation negative feedback loop
 	 */
 	int speed_control;
@@ -454,7 +441,6 @@ typedef struct ide_tape_obj {
 	int controlled_pipeline_head_speed;
 	int uncontrolled_pipeline_head_speed;
 	int controlled_last_pipeline_head;
-	int uncontrolled_last_pipeline_head;
 	unsigned long uncontrolled_pipeline_head_time;
 	unsigned long controlled_pipeline_head_time;
 	int controlled_previous_pipeline_head;
@@ -1696,8 +1682,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 		drive->post_reset = 0;
 	}
 
-	if (tape->tape_still_time > 100 && tape->tape_still_time < 200)
-		tape->measure_insert_time = 1;
 	if (time_after(jiffies, tape->insert_time))
 		tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
 	idetape_calculate_speeds(drive);
@@ -2010,9 +1994,6 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
 			tape->partition = readpos[1];
 			tape->first_frame_position =
 				be32_to_cpu(*(u32 *)&readpos[4]);
-			tape->last_frame_position =
-				be32_to_cpu(*(u32 *)&readpos[8]);
-			tape->blocks_in_buffer = readpos[15];
 			set_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
 			idetape_end_request(drive, 1, 0);
 		}
@@ -2541,7 +2522,7 @@ static void idetape_restart_speed_control (ide_drive_t *drive)
 
 	tape->restart_speed_control_req = 0;
 	tape->pipeline_head = 0;
-	tape->controlled_last_pipeline_head = tape->uncontrolled_last_pipeline_head = 0;
+	tape->controlled_last_pipeline_head = 0;
 	tape->controlled_previous_pipeline_head = tape->uncontrolled_previous_pipeline_head = 0;
 	tape->pipeline_head_speed = tape->controlled_pipeline_head_speed = 5000;
 	tape->uncontrolled_pipeline_head_speed = 0;
@@ -3438,9 +3419,9 @@ static int idetape_identify_device (ide_drive_t *drive)
 
 static void idetape_get_inquiry_results(ide_drive_t *drive)
 {
-	char *r;
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_pc_t pc;
+	char fw_rev[6], vendor_id[10], product_id[18];
 
 	idetape_create_inquiry_cmd(&pc);
 	if (idetape_queue_pc_tail(drive, &pc)) {
@@ -3448,20 +3429,16 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
 				tape->name);
 		return;
 	}
-	memcpy(tape->vendor_id, &pc.buffer[8], 8);
-	memcpy(tape->product_id, &pc.buffer[16], 16);
-	memcpy(tape->firmware_revision, &pc.buffer[32], 4);
-
-	ide_fixstring(tape->vendor_id, 10, 0);
-	ide_fixstring(tape->product_id, 18, 0);
-	ide_fixstring(tape->firmware_revision, 6, 0);
-	r = tape->firmware_revision;
-	if (*(r + 1) == '.')
-		tape->firmware_revision_num = (*r - '0') * 100 +
-			(*(r + 2) - '0') * 10 +	*(r + 3) - '0';
+	memcpy(vendor_id, &pc.buffer[8], 8);
+	memcpy(product_id, &pc.buffer[16], 16);
+	memcpy(fw_rev, &pc.buffer[32], 4);
+
+	ide_fixstring(vendor_id, 10, 0);
+	ide_fixstring(product_id, 18, 0);
+	ide_fixstring(fw_rev, 6, 0);
+
 	printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",
-			drive->name, tape->name, tape->vendor_id,
-			tape->product_id, tape->firmware_revision);
+			drive->name, tape->name, vendor_id, product_id, fw_rev);
 }
 
 /*
-- 
1.5.3.7

Re: [PATCH 06/22] ide-tape: struct idetape_tape_t: remove unused members

[Sergei Shtylyov]

Hello.

Borislav Petkov wrote:

> - last_frame_position: only being written to once
> - firmware_revision, product_id, vendor_id: used once, remove from struct
>   idetape_tape_t and deal with them locally
> - firmware_revision_num: only written to once
> - tape_still_time_begin: completely unused
> - tape_still_time: never written to; remove corresponding code chunk
> - uncontrolled_last_pipeline_head: only once written to
> - blocks_in_buffer: only written to

> Signed-off-by: Borislav Petkov <petkovbb@gmail.com>

    Late complaint but anyway... :-)

> diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
> index e0e8184..126e8a9 100644
> --- a/drivers/ide/ide-tape.c
> +++ b/drivers/ide/ide-tape.c
> @@ -399,11 +397,6 @@ typedef struct ide_tape_obj {
>  	int avg_size;
>  	int avg_speed;
>  
> -	char vendor_id[10];
> -	char product_id[18];
> -	char firmware_revision[6];
> -	int firmware_revision_num;
> -
>  	/* the door is currently locked */
>  	int door_locked;
>  	/* the tape hardware is write protected */

[...]

> @@ -3438,9 +3419,9 @@ static int idetape_identify_device (ide_drive_t *drive)
>  
>  static void idetape_get_inquiry_results(ide_drive_t *drive)
>  {
> -	char *r;
>  	idetape_tape_t *tape = drive->driver_data;
>  	idetape_pc_t pc;
> +	char fw_rev[6], vendor_id[10], product_id[18];
>  
>  	idetape_create_inquiry_cmd(&pc);
>  	if (idetape_queue_pc_tail(drive, &pc)) {
> @@ -3448,20 +3429,16 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
>  				tape->name);
>  		return;
>  	}
> -	memcpy(tape->vendor_id, &pc.buffer[8], 8);
> -	memcpy(tape->product_id, &pc.buffer[16], 16);
> -	memcpy(tape->firmware_revision, &pc.buffer[32], 4);
> -
> -	ide_fixstring(tape->vendor_id, 10, 0);
> -	ide_fixstring(tape->product_id, 18, 0);
> -	ide_fixstring(tape->firmware_revision, 6, 0);
> -	r = tape->firmware_revision;
> -	if (*(r + 1) == '.')
> -		tape->firmware_revision_num = (*r - '0') * 100 +
> -			(*(r + 2) - '0') * 10 +	*(r + 3) - '0';
> +	memcpy(vendor_id, &pc.buffer[8], 8);
> +	memcpy(product_id, &pc.buffer[16], 16);
> +	memcpy(fw_rev, &pc.buffer[32], 4);
> +
> +	ide_fixstring(vendor_id, 10, 0);
> +	ide_fixstring(product_id, 18, 0);
> +	ide_fixstring(fw_rev, 6, 0);

    It was wrong to call ide_fixstring() on unterminated strings and expecting 
them to become terminated strings after that; plus it was useless to add 2 
characters padding at the end. When these variables were the fields of 'struct 
ide_tape_obj', those bytes were 0 because of the variable of this type being a 
static array. When they became local variables, they got garbage bytes at the 
end which ide_fixdriveid() either honestly copied when compressing spaces or 
just left where they were...

> +
>  	printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",

    Should've rather changed the string format to print only N characters max...

MBR, Sergei

Re: [PATCH 06/22] ide-tape: struct idetape_tape_t: remove unused members

[Boris Petkov]

On Mon, Sep 22, 2008 at 3:25 PM, Sergei Shtylyov
<sshtylyov@ru.mvista.com> wrote:
> Hello.
>
> Borislav Petkov wrote:
>
>> - last_frame_position: only being written to once
>> - firmware_revision, product_id, vendor_id: used once, remove from struct
>>  idetape_tape_t and deal with them locally
>> - firmware_revision_num: only written to once
>> - tape_still_time_begin: completely unused
>> - tape_still_time: never written to; remove corresponding code chunk
>> - uncontrolled_last_pipeline_head: only once written to
>> - blocks_in_buffer: only written to
>
>> Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
>
>   Late complaint but anyway... :-)
>
>> diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
>> index e0e8184..126e8a9 100644
>> --- a/drivers/ide/ide-tape.c
>> +++ b/drivers/ide/ide-tape.c
>> @@ -399,11 +397,6 @@ typedef struct ide_tape_obj {
>>        int avg_size;
>>        int avg_speed;
>>  -       char vendor_id[10];
>> -       char product_id[18];
>> -       char firmware_revision[6];
>> -       int firmware_revision_num;
>> -
>>        /* the door is currently locked */
>>        int door_locked;
>>        /* the tape hardware is write protected */
>
> [...]
>
>> @@ -3438,9 +3419,9 @@ static int idetape_identify_device (ide_drive_t
>> *drive)
>>   static void idetape_get_inquiry_results(ide_drive_t *drive)
>>  {
>> -       char *r;
>>        idetape_tape_t *tape = drive->driver_data;
>>        idetape_pc_t pc;
>> +       char fw_rev[6], vendor_id[10], product_id[18];
>>          idetape_create_inquiry_cmd(&pc);
>>        if (idetape_queue_pc_tail(drive, &pc)) {
>> @@ -3448,20 +3429,16 @@ static void
>> idetape_get_inquiry_results(ide_drive_t *drive)
>>                                tape->name);
>>                return;
>>        }
>> -       memcpy(tape->vendor_id, &pc.buffer[8], 8);
>> -       memcpy(tape->product_id, &pc.buffer[16], 16);
>> -       memcpy(tape->firmware_revision, &pc.buffer[32], 4);
>> -
>> -       ide_fixstring(tape->vendor_id, 10, 0);
>> -       ide_fixstring(tape->product_id, 18, 0);
>> -       ide_fixstring(tape->firmware_revision, 6, 0);
>> -       r = tape->firmware_revision;
>> -       if (*(r + 1) == '.')
>> -               tape->firmware_revision_num = (*r - '0') * 100 +
>> -                       (*(r + 2) - '0') * 10 + *(r + 3) - '0';
>> +       memcpy(vendor_id, &pc.buffer[8], 8);
>> +       memcpy(product_id, &pc.buffer[16], 16);
>> +       memcpy(fw_rev, &pc.buffer[32], 4);
>> +
>> +       ide_fixstring(vendor_id, 10, 0);
>> +       ide_fixstring(product_id, 18, 0);
>> +       ide_fixstring(fw_rev, 6, 0);
>
>   It was wrong to call ide_fixstring() on unterminated strings and expecting
> them to become terminated strings after that; plus it was useless to add 2
> characters padding at the end. When these variables were the fields of
> 'struct ide_tape_obj', those bytes were 0 because of the variable of this
> type being a static array. When they became local variables, they got
> garbage bytes at the end which ide_fixdriveid() either honestly copied when
> compressing spaces or just left where they were...

LOL, i just sent out a similar fix :).

>
>> +
>>        printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",
>
>   Should've rather changed the string format to print only N characters
> max...
>
> MBR, Sergei
>



-- 
Regards/Gruss,
Boris

Re: [PATCH 06/22] ide-tape: struct idetape_tape_t: remove unused members

[Sergei Shtylyov]

Boris Petkov wrote:

>>>@@ -3438,9 +3419,9 @@ static int idetape_identify_device (ide_drive_t
>>>*drive)
>>>  static void idetape_get_inquiry_results(ide_drive_t *drive)
>>> {
>>>-       char *r;
>>>       idetape_tape_t *tape = drive->driver_data;
>>>       idetape_pc_t pc;
>>>+       char fw_rev[6], vendor_id[10], product_id[18];
>>>         idetape_create_inquiry_cmd(&pc);
>>>       if (idetape_queue_pc_tail(drive, &pc)) {
>>>@@ -3448,20 +3429,16 @@ static void
>>>idetape_get_inquiry_results(ide_drive_t *drive)
>>>                               tape->name);
>>>               return;
>>>       }
>>>-       memcpy(tape->vendor_id, &pc.buffer[8], 8);
>>>-       memcpy(tape->product_id, &pc.buffer[16], 16);
>>>-       memcpy(tape->firmware_revision, &pc.buffer[32], 4);
>>>-
>>>-       ide_fixstring(tape->vendor_id, 10, 0);
>>>-       ide_fixstring(tape->product_id, 18, 0);
>>>-       ide_fixstring(tape->firmware_revision, 6, 0);
>>>-       r = tape->firmware_revision;
>>>-       if (*(r + 1) == '.')
>>>-               tape->firmware_revision_num = (*r - '0') * 100 +
>>>-                       (*(r + 2) - '0') * 10 + *(r + 3) - '0';
>>>+       memcpy(vendor_id, &pc.buffer[8], 8);
>>>+       memcpy(product_id, &pc.buffer[16], 16);
>>>+       memcpy(fw_rev, &pc.buffer[32], 4);
>>>+
>>>+       ide_fixstring(vendor_id, 10, 0);
>>>+       ide_fixstring(product_id, 18, 0);
>>>+       ide_fixstring(fw_rev, 6, 0);

>>  It was wrong to call ide_fixstring() on unterminated strings and expecting
>>them to become terminated strings after that; plus it was useless to add 2
>>characters padding at the end. When these variables were the fields of
>>'struct ide_tape_obj', those bytes were 0 because of the variable of this
>>type being a static array. When they became local variables, they got
>>garbage bytes at the end which ide_fixdriveid() either honestly copied when
>>compressing spaces or just left where they were...

> LOL, i just sent out a similar fix :).

>>>+
>>>       printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",

>>  Should've rather changed the string format to print only N characters
>>max...

    The fix that I have suggested isn't at all similar.  We don't need to 
waste memory on extra bytes, and even less on them being of the 'static' 
memory class...

MBR, Sergei

[PATCH 07/22] ide-tape: struct idetape_tape_t: shorten member names v2

[Borislav Petkov]

Shorten some member names not too aggressively since this driver might be gone
anyway soon.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |  210 ++++++++++++++++++++++++++----------------------
 1 files changed, 113 insertions(+), 97 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 126e8a9..0b5ccce 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -299,10 +299,8 @@ typedef struct ide_tape_obj {
 	/* Timer used to poll for dsc */
 	struct timer_list dsc_timer;
 	/* Read/Write dsc polling frequency */
-	unsigned long best_dsc_rw_frequency;
-	/* The current polling frequency */
-	unsigned long dsc_polling_frequency;
-	/* Maximum waiting time */
+	unsigned long best_dsc_rw_freq;
+	unsigned long dsc_poll_freq;
 	unsigned long dsc_timeout;
 
 	/*
@@ -310,7 +308,7 @@ typedef struct ide_tape_obj {
 	 */
 	u8 partition;
 	/* Current block */
-	unsigned int first_frame_position;
+	unsigned int first_frame;
 
 	/*
 	 *	Last error information
@@ -326,11 +324,8 @@ typedef struct ide_tape_obj {
 	/* Current character device data transfer direction */
 	u8 chrdev_dir;
 
-	/*
-	 *	Device information
-	 */
-	/* Usually 512 or 1024 bytes */
-	unsigned short tape_block_size;
+	/* tape block size, usu. 512 or 1024 bytes */
+	unsigned short blk_size;
 	int user_bs_factor;
 
 	/* Copy of the tape's Capabilities and Mechanical Page */
@@ -349,8 +344,8 @@ typedef struct ide_tape_obj {
 	 *	The data buffer size is chosen based on the tape's
 	 *	recommendation.
 	 */
-	/* Pointer to the request which is waiting in the device request queue */
-	struct request *active_data_request;
+	/* Ptr to the request which is waiting in the device request queue */
+	struct request *active_data_rq;
 	/* Data buffer size (chosen based on the tape's recommendation */
 	int stage_size;
 	idetape_stage_t *merge_stage;
@@ -388,7 +383,7 @@ typedef struct ide_tape_obj {
 	/* Status/Action flags: long for set_bit */
 	unsigned long flags;
 	/* protects the ide-tape queue */
-	spinlock_t spinlock;
+	spinlock_t lock;
 
 	/*
 	 * Measures average tape speed
@@ -750,7 +745,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 	/* Correct pc->actually_transferred by asking the tape.	 */
 	if (test_bit(PC_DMA_ERROR, &pc->flags)) {
 		pc->actually_transferred = pc->request_transfer -
-			tape->tape_block_size *
+			tape->blk_size *
 			be32_to_cpu(get_unaligned((u32 *)&sense[3]));
 		idetape_update_buffers(pc);
 	}
@@ -809,7 +804,7 @@ static void idetape_activate_next_stage(ide_drive_t *drive)
 	rq->rq_disk = tape->disk;
 	rq->buffer = NULL;
 	rq->special = (void *)stage->bh;
-	tape->active_data_request = rq;
+	tape->active_data_rq = rq;
 	tape->active_stage = stage;
 	tape->next_stage = stage->next;
 }
@@ -951,13 +946,13 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 		return 0;
 	}
 
-	spin_lock_irqsave(&tape->spinlock, flags);
+	spin_lock_irqsave(&tape->lock, flags);
 
 	/* The request was a pipelined data transfer request */
-	if (tape->active_data_request == rq) {
+	if (tape->active_data_rq == rq) {
 		active_stage = tape->active_stage;
 		tape->active_stage = NULL;
-		tape->active_data_request = NULL;
+		tape->active_data_rq = NULL;
 		tape->nr_pending_stages--;
 		if (rq->cmd[0] & REQ_IDETAPE_WRITE) {
 			remove_stage = 1;
@@ -978,7 +973,8 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 			/*
 			 * Insert the next request into the request queue.
 			 */
-			(void) ide_do_drive_cmd(drive, tape->active_data_request, ide_end);
+			(void)ide_do_drive_cmd(drive, tape->active_data_rq,
+						ide_end);
 		} else if (!error) {
 				idetape_increase_max_pipeline_stages(drive);
 		}
@@ -990,9 +986,9 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 
 	if (remove_stage)
 		idetape_remove_stage_head(drive);
-	if (tape->active_data_request == NULL)
+	if (tape->active_data_rq == NULL)
 		clear_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
-	spin_unlock_irqrestore(&tape->spinlock, flags);
+	spin_unlock_irqrestore(&tape->lock, flags);
 	return 0;
 }
 
@@ -1089,7 +1085,7 @@ static void idetape_postpone_request (ide_drive_t *drive)
 	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	tape->postponed_rq = HWGROUP(drive)->rq;
-	ide_stall_queue(drive, tape->dsc_polling_frequency);
+	ide_stall_queue(drive, tape->dsc_poll_freq);
 }
 
 /*
@@ -1191,7 +1187,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 		    (stat & SEEK_STAT) == 0) {
 			/* Media access command */
 			tape->dsc_polling_start = jiffies;
-			tape->dsc_polling_frequency = IDETAPE_DSC_MA_FAST;
+			tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST;
 			tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT;
 			/* Allow ide.c to handle other requests */
 			idetape_postpone_request(drive);
@@ -1543,10 +1539,10 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct request *rq = HWGROUP(drive)->rq;
-	int blocks = tape->pc->actually_transferred / tape->tape_block_size;
+	int blocks = tape->pc->actually_transferred / tape->blk_size;
 
-	tape->avg_size += blocks * tape->tape_block_size;
-	tape->insert_size += blocks * tape->tape_block_size;
+	tape->avg_size += blocks * tape->blk_size;
+	tape->insert_size += blocks * tape->blk_size;
 	if (tape->insert_size > 1024 * 1024)
 		tape->measure_insert_time = 1;
 	if (tape->measure_insert_time) {
@@ -1563,7 +1559,7 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive)
 	}
 	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
-	tape->first_frame_position += blocks;
+	tape->first_frame += blocks;
 	rq->current_nr_sectors -= blocks;
 
 	if (!tape->pc->error)
@@ -1583,7 +1579,8 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsi
 	pc->bh = bh;
 	atomic_set(&bh->b_count, 0);
 	pc->buffer = NULL;
-	pc->request_transfer = pc->buffer_size = length * tape->tape_block_size;
+	pc->buffer_size		= length * tape->blk_size;
+	pc->request_transfer	= length * tape->blk_size;
 	if (pc->request_transfer == tape->stage_size)
 		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
 }
@@ -1621,7 +1618,8 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, uns
 	pc->b_data = bh->b_data;
 	pc->b_count = atomic_read(&bh->b_count);
 	pc->buffer = NULL;
-	pc->request_transfer = pc->buffer_size = length * tape->tape_block_size;
+	pc->request_transfer	= length * tape->blk_size;
+	pc->buffer_size		= length * tape->blk_size;
 	if (pc->request_transfer == tape->stage_size)
 		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
 }
@@ -1689,7 +1687,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	    (stat & SEEK_STAT) == 0) {
 		if (postponed_rq == NULL) {
 			tape->dsc_polling_start = jiffies;
-			tape->dsc_polling_frequency = tape->best_dsc_rw_frequency;
+			tape->dsc_poll_freq = tape->best_dsc_rw_freq;
 			tape->dsc_timeout = jiffies + IDETAPE_DSC_RW_TIMEOUT;
 		} else if (time_after(jiffies, tape->dsc_timeout)) {
 			printk(KERN_ERR "ide-tape: %s: DSC timeout\n",
@@ -1701,7 +1699,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 				return ide_do_reset(drive);
 			}
 		} else if (time_after(jiffies, tape->dsc_polling_start + IDETAPE_DSC_MA_THRESHOLD))
-			tape->dsc_polling_frequency = IDETAPE_DSC_MA_SLOW;
+			tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW;
 		idetape_postpone_request(drive);
 		return ide_stopped;
 	}
@@ -1748,7 +1746,7 @@ static inline int idetape_pipeline_active (idetape_tape_t *tape)
 	int rc1, rc2;
 
 	rc1 = test_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
-	rc2 = (tape->active_data_request != NULL);
+	rc2 = (tape->active_data_rq != NULL);
 	return rc1;
 }
 
@@ -1930,7 +1928,7 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage)
 
 	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
-	spin_lock_irqsave(&tape->spinlock, flags);
+	spin_lock_irqsave(&tape->lock, flags);
 	stage->next = NULL;
 	if (tape->last_stage != NULL)
 		tape->last_stage->next=stage;
@@ -1941,7 +1939,7 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage)
 		tape->next_stage = tape->last_stage;
 	tape->nr_stages++;
 	tape->nr_pending_stages++;
-	spin_unlock_irqrestore(&tape->spinlock, flags);
+	spin_unlock_irqrestore(&tape->lock, flags);
 }
 
 /*
@@ -1962,10 +1960,10 @@ static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq)
 	}
 	rq->end_io_data = &wait;
 	rq->end_io = blk_end_sync_rq;
-	spin_unlock_irq(&tape->spinlock);
+	spin_unlock_irq(&tape->lock);
 	wait_for_completion(&wait);
 	/* The stage and its struct request have been deallocated */
-	spin_lock_irq(&tape->spinlock);
+	spin_lock_irq(&tape->lock);
 }
 
 static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
@@ -1992,7 +1990,7 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
 					be32_to_cpu(*(u32 *)&readpos[4]));
 
 			tape->partition = readpos[1];
-			tape->first_frame_position =
+			tape->first_frame =
 				be32_to_cpu(*(u32 *)&readpos[4]);
 			set_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
 			idetape_end_request(drive, 1, 0);
@@ -2134,7 +2132,7 @@ static int idetape_read_position (ide_drive_t *drive)
 	idetape_create_read_position_cmd(&pc);
 	if (idetape_queue_pc_tail(drive, &pc))
 		return -1;
-	position = tape->first_frame_position;
+	position = tape->first_frame;
 	return position;
 }
 
@@ -2174,7 +2172,7 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
 		return 0;
 
 	/* Remove merge stage. */
-	cnt = tape->merge_stage_size / tape->tape_block_size;
+	cnt = tape->merge_stage_size / tape->blk_size;
 	if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags))
 		++cnt;		/* Filemarks count as 1 sector */
 	tape->merge_stage_size = 0;
@@ -2191,11 +2189,11 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
 	if (tape->first_stage == NULL)
 		return 0;
 
-	spin_lock_irqsave(&tape->spinlock, flags);
+	spin_lock_irqsave(&tape->lock, flags);
 	tape->next_stage = NULL;
 	if (idetape_pipeline_active(tape))
-		idetape_wait_for_request(drive, tape->active_data_request);
-	spin_unlock_irqrestore(&tape->spinlock, flags);
+		idetape_wait_for_request(drive, tape->active_data_rq);
+	spin_unlock_irqrestore(&tape->lock, flags);
 
 	while (tape->first_stage != NULL) {
 		struct request *rq_ptr = &tape->first_stage->rq;
@@ -2274,7 +2272,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct
 	idetape_init_rq(&rq, cmd);
 	rq.rq_disk = tape->disk;
 	rq.special = (void *)bh;
-	rq.sector = tape->first_frame_position;
+	rq.sector = tape->first_frame;
 	rq.nr_sectors = rq.current_nr_sectors = blocks;
 	(void) ide_do_drive_cmd(drive, &rq, ide_wait);
 
@@ -2285,7 +2283,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct
 		idetape_init_merge_stage(tape);
 	if (rq.errors == IDETAPE_ERROR_GENERAL)
 		return -EIO;
-	return (tape->tape_block_size * (blocks-rq.current_nr_sectors));
+	return (tape->blk_size * (blocks-rq.current_nr_sectors));
 }
 
 /*
@@ -2301,7 +2299,7 @@ static void idetape_insert_pipeline_into_queue (ide_drive_t *drive)
 	if (!idetape_pipeline_active(tape)) {
 		set_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
 		idetape_activate_next_stage(drive);
-		(void) ide_do_drive_cmd(drive, tape->active_data_request, ide_end);
+		(void) ide_do_drive_cmd(drive, tape->active_data_rq, ide_end);
 	}
 }
 
@@ -2347,10 +2345,10 @@ static void idetape_wait_first_stage (ide_drive_t *drive)
 
 	if (tape->first_stage == NULL)
 		return;
-	spin_lock_irqsave(&tape->spinlock, flags);
+	spin_lock_irqsave(&tape->lock, flags);
 	if (tape->active_stage == tape->first_stage)
-		idetape_wait_for_request(drive, tape->active_data_request);
-	spin_unlock_irqrestore(&tape->spinlock, flags);
+		idetape_wait_for_request(drive, tape->active_data_rq);
+	spin_unlock_irqrestore(&tape->lock, flags);
 }
 
 /*
@@ -2378,12 +2376,12 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 	 *	Pay special attention to possible race conditions.
 	 */
 	while ((new_stage = idetape_kmalloc_stage(tape)) == NULL) {
-		spin_lock_irqsave(&tape->spinlock, flags);
+		spin_lock_irqsave(&tape->lock, flags);
 		if (idetape_pipeline_active(tape)) {
-			idetape_wait_for_request(drive, tape->active_data_request);
-			spin_unlock_irqrestore(&tape->spinlock, flags);
+			idetape_wait_for_request(drive, tape->active_data_rq);
+			spin_unlock_irqrestore(&tape->lock, flags);
 		} else {
-			spin_unlock_irqrestore(&tape->spinlock, flags);
+			spin_unlock_irqrestore(&tape->lock, flags);
 			idetape_insert_pipeline_into_queue(drive);
 			if (idetape_pipeline_active(tape))
 				continue;
@@ -2397,7 +2395,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 	rq = &new_stage->rq;
 	idetape_init_rq(rq, REQ_IDETAPE_WRITE);
 	/* Doesn't actually matter - We always assume sequential access */
-	rq->sector = tape->first_frame_position;
+	rq->sector = tape->first_frame;
 	rq->nr_sectors = rq->current_nr_sectors = blocks;
 
 	idetape_switch_buffers(tape, new_stage);
@@ -2414,7 +2412,9 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 	 */
 	if (!idetape_pipeline_active(tape)) {
 		if (tape->nr_stages >= tape->max_stages * 9 / 10 ||
-		    tape->nr_stages >= tape->max_stages - tape->uncontrolled_pipeline_head_speed * 3 * 1024 / tape->tape_block_size) {
+			tape->nr_stages >= tape->max_stages -
+			tape->uncontrolled_pipeline_head_speed * 3 * 1024 /
+			tape->blk_size) {
 			tape->measure_insert_time = 1;
 			tape->insert_time = jiffies;
 			tape->insert_size = 0;
@@ -2439,10 +2439,10 @@ static void idetape_wait_for_pipeline (ide_drive_t *drive)
 
 	while (tape->next_stage || idetape_pipeline_active(tape)) {
 		idetape_insert_pipeline_into_queue(drive);
-		spin_lock_irqsave(&tape->spinlock, flags);
+		spin_lock_irqsave(&tape->lock, flags);
 		if (idetape_pipeline_active(tape))
-			idetape_wait_for_request(drive, tape->active_data_request);
-		spin_unlock_irqrestore(&tape->spinlock, flags);
+			idetape_wait_for_request(drive, tape->active_data_rq);
+		spin_unlock_irqrestore(&tape->lock, flags);
 	}
 }
 
@@ -2461,12 +2461,13 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
 		tape->merge_stage_size = tape->stage_size;
 	}
 	if (tape->merge_stage_size) {
-		blocks = tape->merge_stage_size / tape->tape_block_size;
-		if (tape->merge_stage_size % tape->tape_block_size) {
+		blocks = tape->merge_stage_size / tape->blk_size;
+		if (tape->merge_stage_size % tape->blk_size) {
 			unsigned int i;
 
 			blocks++;
-			i = tape->tape_block_size - tape->merge_stage_size % tape->tape_block_size;
+			i = tape->blk_size - tape->merge_stage_size %
+				tape->blk_size;
 			bh = tape->bh->b_reqnext;
 			while (bh) {
 				atomic_set(&bh->b_count, 0);
@@ -2572,7 +2573,7 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages)
 	if (tape->restart_speed_control_req)
 		idetape_restart_speed_control(drive);
 	idetape_init_rq(&rq, REQ_IDETAPE_READ);
-	rq.sector = tape->first_frame_position;
+	rq.sector = tape->first_frame;
 	rq.nr_sectors = rq.current_nr_sectors = blocks;
 	if (!test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags) &&
 	    tape->nr_stages < max_stages) {
@@ -2625,11 +2626,13 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 	if (tape->first_stage == NULL) {
 		if (test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
 			return 0;
-		return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, tape->merge_stage->bh);
+		return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
+					tape->merge_stage->bh);
 	}
 	idetape_wait_first_stage(drive);
 	rq_ptr = &tape->first_stage->rq;
-	bytes_read = tape->tape_block_size * (rq_ptr->nr_sectors - rq_ptr->current_nr_sectors);
+	bytes_read = tape->blk_size * (rq_ptr->nr_sectors -
+					rq_ptr->current_nr_sectors);
 	rq_ptr->nr_sectors = rq_ptr->current_nr_sectors = 0;
 
 
@@ -2639,15 +2642,15 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 		idetape_switch_buffers(tape, tape->first_stage);
 		if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK)
 			set_bit(IDETAPE_FILEMARK, &tape->flags);
-		spin_lock_irqsave(&tape->spinlock, flags);
+		spin_lock_irqsave(&tape->lock, flags);
 		idetape_remove_stage_head(drive);
-		spin_unlock_irqrestore(&tape->spinlock, flags);
+		spin_unlock_irqrestore(&tape->lock, flags);
 		tape->pipeline_head++;
 		idetape_calculate_speeds(drive);
 	}
-	if (bytes_read > blocks * tape->tape_block_size) {
+	if (bytes_read > blocks * tape->blk_size) {
 		printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n");
-		bytes_read = blocks * tape->tape_block_size;
+		bytes_read = blocks * tape->blk_size;
 	}
 	return (bytes_read);
 }
@@ -2664,7 +2667,7 @@ static void idetape_pad_zeros (ide_drive_t *drive, int bcount)
 		bh = tape->merge_stage->bh;
 		count = min(tape->stage_size, bcount);
 		bcount -= count;
-		blocks = count / tape->tape_block_size;
+		blocks = count / tape->blk_size;
 		while (count) {
 			atomic_set(&bh->b_count, min(count, (unsigned int)bh->b_size));
 			memset(bh->b_data, 0, atomic_read(&bh->b_count));
@@ -2686,9 +2689,10 @@ static int idetape_pipeline_size (ide_drive_t *drive)
 	stage = tape->first_stage;
 	while (stage != NULL) {
 		rq = &stage->rq;
-		size += tape->tape_block_size * (rq->nr_sectors-rq->current_nr_sectors);
+		size += tape->blk_size * (rq->nr_sectors -
+				rq->current_nr_sectors);
 		if (rq->errors == IDETAPE_ERROR_FILEMARK)
-			size += tape->tape_block_size;
+			size += tape->blk_size;
 		stage = stage->next;
 	}
 	size += tape->merge_stage_size;
@@ -2745,11 +2749,11 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l
 		case 0x0340:
 			if (copy_from_user(&config, argp, sizeof(config)))
 				return -EFAULT;
-			tape->best_dsc_rw_frequency = config.dsc_rw_frequency;
+			tape->best_dsc_rw_freq = config.dsc_rw_frequency;
 			tape->max_stages = config.nr_stages;
 			break;
 		case 0x0350:
-			config.dsc_rw_frequency = (int) tape->best_dsc_rw_frequency;
+			config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
 			config.nr_stages = tape->max_stages; 
 			if (copy_to_user(argp, &config, sizeof(config)))
 				return -EFAULT;
@@ -2799,7 +2803,7 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
 					set_bit(IDETAPE_FILEMARK, &tape->flags);
 				return 0;
 			}
-			spin_lock_irqsave(&tape->spinlock, flags);
+			spin_lock_irqsave(&tape->lock, flags);
 			if (tape->first_stage == tape->active_stage) {
 				/*
 				 *	We have reached the active stage in the read pipeline.
@@ -2811,11 +2815,11 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
 				 *	__idetape_discard_read_pipeline(), for example.
 				 */
 				tape->next_stage = NULL;
-				spin_unlock_irqrestore(&tape->spinlock, flags);
+				spin_unlock_irqrestore(&tape->lock, flags);
 				idetape_wait_first_stage(drive);
 				tape->next_stage = tape->first_stage->next;
 			} else
-				spin_unlock_irqrestore(&tape->spinlock, flags);
+				spin_unlock_irqrestore(&tape->lock, flags);
 			if (tape->first_stage->rq.errors == IDETAPE_ERROR_FILEMARK)
 				++count;
 			idetape_remove_stage_head(drive);
@@ -2877,9 +2881,9 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
 
 	if (tape->chrdev_dir != IDETAPE_DIR_READ) {
 		if (test_bit(IDETAPE_DETECT_BS, &tape->flags))
-			if (count > tape->tape_block_size &&
-			    (count % tape->tape_block_size) == 0)
-				tape->user_bs_factor = count / tape->tape_block_size;
+			if (count > tape->blk_size &&
+			    (count % tape->blk_size) == 0)
+				tape->user_bs_factor = count / tape->blk_size;
 	}
 	if ((rc = idetape_initiate_read(drive, tape->max_stages)) < 0)
 		return rc;
@@ -3116,9 +3120,11 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 			return (idetape_queue_pc_tail(drive, &pc));
 		case MTSETBLK:
 			if (mt_count) {
-				if (mt_count < tape->tape_block_size || mt_count % tape->tape_block_size)
+				if (mt_count < tape->blk_size ||
+				    mt_count % tape->blk_size)
 					return -EIO;
-				tape->user_bs_factor = mt_count / tape->tape_block_size;
+				tape->user_bs_factor = mt_count /
+							tape->blk_size;
 				clear_bit(IDETAPE_DETECT_BS, &tape->flags);
 			} else
 				set_bit(IDETAPE_DETECT_BS, &tape->flags);
@@ -3165,7 +3171,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
 	struct mtop mtop;
 	struct mtget mtget;
 	struct mtpos mtpos;
-	int block_offset = 0, position = tape->first_frame_position;
+	int block_offset = 0, position = tape->first_frame;
 	void __user *argp = (void __user *)arg;
 
 	debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd);
@@ -3176,7 +3182,8 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
 		idetape_flush_tape_buffers(drive);
 	}
 	if (cmd == MTIOCGET || cmd == MTIOCPOS) {
-		block_offset = idetape_pipeline_size(drive) / (tape->tape_block_size * tape->user_bs_factor);
+		block_offset = idetape_pipeline_size(drive) /
+			(tape->blk_size * tape->user_bs_factor);
 		if ((position = idetape_read_position(drive)) < 0)
 			return -EIO;
 	}
@@ -3189,7 +3196,10 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
 			memset(&mtget, 0, sizeof (struct mtget));
 			mtget.mt_type = MT_ISSCSI2;
 			mtget.mt_blkno = position / tape->user_bs_factor - block_offset;
-			mtget.mt_dsreg = ((tape->tape_block_size * tape->user_bs_factor) << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK;
+			mtget.mt_dsreg =
+				((tape->blk_size * tape->user_bs_factor)
+				 << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK;
+
 			if (tape->drv_write_prot) {
 				mtget.mt_gstat |= GMT_WR_PROT(0xffffffff);
 			}
@@ -3220,14 +3230,14 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
 	idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
 	if (idetape_queue_pc_tail(drive, &pc)) {
 		printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
-		if (tape->tape_block_size == 0) {
+		if (tape->blk_size == 0) {
 			printk(KERN_WARNING "ide-tape: Cannot deal with zero "
 					    "block size, assuming 32k\n");
-			tape->tape_block_size = 32768;
+			tape->blk_size = 32768;
 		}
 		return;
 	}
-	tape->tape_block_size = (pc.buffer[4 + 5] << 16) +
+	tape->blk_size = (pc.buffer[4 + 5] << 16) +
 				(pc.buffer[4 + 6] << 8)  +
 				 pc.buffer[4 + 7];
 	tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7;
@@ -3329,7 +3339,8 @@ static void idetape_write_release (ide_drive_t *drive, unsigned int minor)
 	idetape_empty_write_pipeline(drive);
 	tape->merge_stage = __idetape_kmalloc_stage(tape, 1, 0);
 	if (tape->merge_stage != NULL) {
-		idetape_pad_zeros(drive, tape->tape_block_size * (tape->user_bs_factor - 1));
+		idetape_pad_zeros(drive, tape->blk_size *
+				(tape->user_bs_factor - 1));
 		__idetape_kfree_stage(tape->merge_stage);
 		tape->merge_stage = NULL;
 	}
@@ -3456,7 +3467,7 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive)
 	if (idetape_queue_pc_tail(drive, &pc)) {
 		printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
 				" some default values\n");
-		tape->tape_block_size = 512;
+		tape->blk_size = 512;
 		put_unaligned(52,   (u16 *)&tape->caps[12]);
 		put_unaligned(540,  (u16 *)&tape->caps[14]);
 		put_unaligned(6*52, (u16 *)&tape->caps[16]);
@@ -3486,9 +3497,9 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive)
 
 	memcpy(&tape->caps, caps, 20);
 	if (caps[7] & 0x02)
-		tape->tape_block_size = 512;
+		tape->blk_size = 512;
 	else if (caps[7] & 0x04)
-		tape->tape_block_size = 1024;
+		tape->blk_size = 1024;
 }
 
 #ifdef CONFIG_IDE_PROC_FS
@@ -3508,8 +3519,11 @@ static void idetape_add_settings (ide_drive_t *drive)
 	ide_add_setting(drive,	"pipeline_pending",	SETTING_READ,	TYPE_INT,	0,			0xffff,			tape->stage_size / 1024,	1,		&tape->nr_pending_stages,		NULL);
 	ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff,
 			1, 1, (u16 *)&tape->caps[14], NULL);
-	ide_add_setting(drive,	"stage",		SETTING_READ,	TYPE_INT,	0,			0xffff,			1,				1024,		&tape->stage_size,			NULL);
-	ide_add_setting(drive,	"tdsc",			SETTING_RW,	TYPE_INT,	IDETAPE_DSC_RW_MIN,	IDETAPE_DSC_RW_MAX,	1000,				HZ,		&tape->best_dsc_rw_frequency,		NULL);
+	ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT,	0, 0xffff, 1,
+			1024, &tape->stage_size, NULL);
+	ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN,
+			IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq,
+			NULL);
 	ide_add_setting(drive,	"dsc_overlap",		SETTING_RW,	TYPE_BYTE,	0,			1,			1,				1,		&drive->dsc_overlap,			NULL);
 	ide_add_setting(drive,	"pipeline_head_speed_c",SETTING_READ,	TYPE_INT,	0,			0xffff,			1,				1,		&tape->controlled_pipeline_head_speed,	NULL);
 	ide_add_setting(drive,	"pipeline_head_speed_u",SETTING_READ,	TYPE_INT,	0,			0xffff,			1,				1,		&tape->uncontrolled_pipeline_head_speed,NULL);
@@ -3542,7 +3556,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	struct sysinfo si;
 	u16 *ctl = (u16 *)&tape->caps[12];
 
-	spin_lock_init(&tape->spinlock);
+	spin_lock_init(&tape->lock);
 	drive->dsc_overlap = 1;
 	if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
 		printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n",
@@ -3570,11 +3584,11 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	idetape_get_mode_sense_results(drive);
 	ide_tape_get_bsize_from_bdesc(drive);
 	tape->user_bs_factor = 1;
-	tape->stage_size = *ctl * tape->tape_block_size;
+	tape->stage_size = *ctl * tape->blk_size;
 	while (tape->stage_size > 0xffff) {
 		printk(KERN_NOTICE "ide-tape: decreasing stage size\n");
 		*ctl /= 2;
-		tape->stage_size = *ctl * tape->tape_block_size;
+		tape->stage_size = *ctl * tape->blk_size;
 	}
 	stage_size = tape->stage_size;
 	tape->pages_per_stage = stage_size / PAGE_SIZE;
@@ -3613,14 +3627,16 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	 *	Ensure that the number we got makes sense; limit
 	 *	it within IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX.
 	 */
-	tape->best_dsc_rw_frequency = max_t(unsigned long, min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), IDETAPE_DSC_RW_MIN);
+	tape->best_dsc_rw_freq = max_t(unsigned long,
+				min_t(unsigned long, t, IDETAPE_DSC_RW_MAX),
+				IDETAPE_DSC_RW_MIN);
 	printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, "
 		"%dkB pipeline, %lums tDSC%s\n",
 		drive->name, tape->name, *(u16 *)&tape->caps[14],
 		(*(u16 *)&tape->caps[16] * 512) / tape->stage_size,
 		tape->stage_size / 1024,
 		tape->max_stages * tape->stage_size / 1024,
-		tape->best_dsc_rw_frequency * 1000 / HZ,
+		tape->best_dsc_rw_freq * 1000 / HZ,
 		drive->using_dma ? ", DMA":"");
 
 	idetape_add_settings(drive);
-- 
1.5.3.7

Re: [PATCH 07/22] ide-tape: struct idetape_tape_t: shorten member names v2

[Bartlomiej Zolnierkiewicz]

On Monday 04 February 2008, Borislav Petkov wrote:
> Shorten some member names not too aggressively since this driver might be gone
> anyway soon.
> 
> Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
> ---
>  drivers/ide/ide-tape.c |  210 ++++++++++++++++++++++++++----------------------
>  1 files changed, 113 insertions(+), 97 deletions(-)
> 
> diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
> index 126e8a9..0b5ccce 100644
> --- a/drivers/ide/ide-tape.c
> +++ b/drivers/ide/ide-tape.c

[...]

> @@ -1583,7 +1579,8 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsi
>  	pc->bh = bh;
>  	atomic_set(&bh->b_count, 0);
>  	pc->buffer = NULL;
> -	pc->request_transfer = pc->buffer_size = length * tape->tape_block_size;
> +	pc->buffer_size		= length * tape->blk_size;
> +	pc->request_transfer	= length * tape->blk_size;
>  	if (pc->request_transfer == tape->stage_size)
>  		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
>  }
> @@ -1621,7 +1618,8 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, uns
>  	pc->b_data = bh->b_data;
>  	pc->b_count = atomic_read(&bh->b_count);
>  	pc->buffer = NULL;
> -	pc->request_transfer = pc->buffer_size = length * tape->tape_block_size;
> +	pc->request_transfer	= length * tape->blk_size;
> +	pc->buffer_size		= length * tape->blk_size;
>  	if (pc->request_transfer == tape->stage_size)
>  		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
>  }

for some reason gcc doesn't seem to optimize the new code as well as
the old one (=> driver size goes up instead of staying unchanged)

interdiff between original patch and merged version:

diff -u b/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
--- b/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -324,7 +324,7 @@
 	/* Current character device data transfer direction */
 	u8 chrdev_dir;
 
-	/* tape block size, usu. 512 or 1024 bytes */
+	/* tape block size, usually 512 or 1024 bytes */
 	unsigned short blk_size;
 	int user_bs_factor;
 
@@ -1580,8 +1580,8 @@
 	pc->bh = bh;
 	atomic_set(&bh->b_count, 0);
 	pc->buffer = NULL;
-	pc->buffer_size		= length * tape->blk_size;
-	pc->request_transfer	= length * tape->blk_size;
+	pc->buffer_size = length * tape->blk_size;
+	pc->request_transfer = pc->buffer_size;
 	if (pc->request_transfer == tape->stage_size)
 		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
 }
@@ -1619,8 +1619,8 @@
 	pc->b_data = bh->b_data;
 	pc->b_count = atomic_read(&bh->b_count);
 	pc->buffer = NULL;
-	pc->request_transfer	= length * tape->blk_size;
-	pc->buffer_size		= length * tape->blk_size;
+	pc->buffer_size = length * tape->blk_size;
+	pc->request_transfer = pc->buffer_size;
 	if (pc->request_transfer == tape->stage_size)
 		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
 }

Re: [PATCH 07/22] ide-tape: struct idetape_tape_t: shorten member names v2

[Borislav Petkov]

On Tue, Feb 05, 2008 at 02:23:21AM +0100, Bartlomiej Zolnierkiewicz wrote:
> On Monday 04 February 2008, Borislav Petkov wrote:
> > Shorten some member names not too aggressively since this driver might be gone
> > anyway soon.
> > 
> > Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
> > ---
> >  drivers/ide/ide-tape.c |  210 ++++++++++++++++++++++++++----------------------
> >  1 files changed, 113 insertions(+), 97 deletions(-)
> > 
> > diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
> > index 126e8a9..0b5ccce 100644
> > --- a/drivers/ide/ide-tape.c
> > +++ b/drivers/ide/ide-tape.c
> 
> [...]
> 
> > @@ -1583,7 +1579,8 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsi
> >  	pc->bh = bh;
> >  	atomic_set(&bh->b_count, 0);
> >  	pc->buffer = NULL;
> > -	pc->request_transfer = pc->buffer_size = length * tape->tape_block_size;
> > +	pc->buffer_size		= length * tape->blk_size;
> > +	pc->request_transfer	= length * tape->blk_size;
> >  	if (pc->request_transfer == tape->stage_size)
> >  		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
> >  }
> > @@ -1621,7 +1618,8 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, uns
> >  	pc->b_data = bh->b_data;
> >  	pc->b_count = atomic_read(&bh->b_count);
> >  	pc->buffer = NULL;
> > -	pc->request_transfer = pc->buffer_size = length * tape->tape_block_size;
> > +	pc->request_transfer	= length * tape->blk_size;
> > +	pc->buffer_size		= length * tape->blk_size;
> >  	if (pc->request_transfer == tape->stage_size)
> >  		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
> >  }
> 
> for some reason gcc doesn't seem to optimize the new code as well as
> the old one (=> driver size goes up instead of staying unchanged)
> 
> interdiff between original patch and merged version:
> 
> diff -u b/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
> --- b/drivers/ide/ide-tape.c
> +++ b/drivers/ide/ide-tape.c
> @@ -324,7 +324,7 @@
>  	/* Current character device data transfer direction */
>  	u8 chrdev_dir;
>  
> -	/* tape block size, usu. 512 or 1024 bytes */
> +	/* tape block size, usually 512 or 1024 bytes */
>  	unsigned short blk_size;
>  	int user_bs_factor;
>  
> @@ -1580,8 +1580,8 @@
>  	pc->bh = bh;
>  	atomic_set(&bh->b_count, 0);
>  	pc->buffer = NULL;
> -	pc->buffer_size		= length * tape->blk_size;
> -	pc->request_transfer	= length * tape->blk_size;
> +	pc->buffer_size = length * tape->blk_size;
> +	pc->request_transfer = pc->buffer_size;
>  	if (pc->request_transfer == tape->stage_size)
>  		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
>  }
> @@ -1619,8 +1619,8 @@
>  	pc->b_data = bh->b_data;
>  	pc->b_count = atomic_read(&bh->b_count);
>  	pc->buffer = NULL;
> -	pc->request_transfer	= length * tape->blk_size;
> -	pc->buffer_size		= length * tape->blk_size;
> +	pc->buffer_size = length * tape->blk_size;
> +	pc->request_transfer = pc->buffer_size;
>  	if (pc->request_transfer == tape->stage_size)
>  		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
>  }

Yeah, i did that only because checkpatch.pl complained that multiple assignments
should be avoided. Now it looks kinda dumb that way besides improving readability
so converting it to the best form w.r.t generating smaller binary would be a reason
good enough to ignore checkpatch.pl in that case.

-- 
Regards/Gruß,
    Boris.

[PATCH 08/22] ide-tape: remove packet command and struct request memory buffers

[Borislav Petkov]

These buffers were always statically allocated during driver initialization no
matter what. Remove them by allocating GFP_ATOMIC memory on demand. In the case
of allocation error, we only issue error msg in the *alloc_{pc,rq} thus postponing
the final error handling and cleanup in their callers. Packet command and
request memory is freed in idetape_end_request() which is at the end of the
request path entered from all callbacks. While at it, integrate comments above
member definitions in ide_tape_obj.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |  146 +++++++++++++++++++++---------------------------
 1 files changed, 63 insertions(+), 83 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 0b5ccce..b4944ef 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -54,8 +54,6 @@ enum {
 	DBG_CHRDEV =		(1 << 2),
 	/* all remaining procedures */
 	DBG_PROCS =		(1 << 3),
-	/* buffer alloc info (pc_stack & rq_stack) */
-	DBG_PCRQ_STACK =	(1 << 4),
 };
 
 /* define to see debug info */
@@ -110,13 +108,6 @@ enum {
 #define IDETAPE_PC_BUFFER_SIZE		256
 
 /*
- *	In various places in the driver, we need to allocate storage
- *	for packet commands and requests, which will remain valid while
- *	we leave the driver to wait for an interrupt or a timeout event.
- */
-#define IDETAPE_PC_STACK		(10 + IDETAPE_MAX_PC_RETRIES)
-
-/*
  * Some drives (for example, Seagate STT3401A Travan) require a very long
  * timeout, because they don't return an interrupt or clear their busy bit
  * until after the command completes (even retension commands).
@@ -255,32 +246,15 @@ typedef struct ide_tape_obj {
 	struct gendisk	*disk;
 	struct kref	kref;
 
+	/* current processed packet command */
+	idetape_pc_t *pc;
 	/*
-	 *	Since a typical character device operation requires more
-	 *	than one packet command, we provide here enough memory
-	 *	for the maximum of interconnected packet commands.
-	 *	The packet commands are stored in the circular array pc_stack.
-	 *	pc_stack_index points to the last used entry, and warps around
-	 *	to the start when we get to the last array entry.
-	 *
-	 *	pc points to the current processed packet command.
-	 *
-	 *	failed_pc points to the last failed packet command, or contains
-	 *	NULL if we do not need to retry any packet command. This is
-	 *	required since an additional packet command is needed before the
-	 *	retry, to get detailed information on what went wrong.
+	 * last failed packet command or NULL if we do not need to retry any
+	 * packet command. This is required since an additional packet command
+	 * is needed before the retry, to get detailed information on what went
+	 * wrong.
 	 */
-	/* Current packet command */
-	idetape_pc_t *pc;
-	/* Last failed packet command */
 	idetape_pc_t *failed_pc;
-	/* Packet command stack */
-	idetape_pc_t pc_stack[IDETAPE_PC_STACK];
-	/* Next free packet command storage space */
-	int pc_stack_index;
-	struct request rq_stack[IDETAPE_PC_STACK];
-	/* We implement a circular array */
-	int rq_stack_index;
 
 	/*
 	 *	DSC polling variables.
@@ -670,45 +644,32 @@ static void idetape_update_buffers (idetape_pc_t *pc)
 	pc->bh = bh;
 }
 
-/*
- *	idetape_next_pc_storage returns a pointer to a place in which we can
- *	safely store a packet command, even though we intend to leave the
- *	driver. A storage space for a maximum of IDETAPE_PC_STACK packet
- *	commands is allocated at initialization time.
- */
-static idetape_pc_t *idetape_next_pc_storage (ide_drive_t *drive)
+static idetape_pc_t *ide_tape_alloc_pc(void)
 {
-	idetape_tape_t *tape = drive->driver_data;
+	idetape_pc_t *pc;
 
-	debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index);
+	pc = kzalloc(sizeof(idetape_pc_t), GFP_ATOMIC);
+	if (!pc)
+		printk(KERN_ERR "ide-tape: %s: memory allocation error.",
+				__func__);
 
-	if (tape->pc_stack_index == IDETAPE_PC_STACK)
-		tape->pc_stack_index=0;
-	return (&tape->pc_stack[tape->pc_stack_index++]);
+	return pc;
 }
 
 /*
- *	idetape_next_rq_storage is used along with idetape_next_pc_storage.
- *	Since we queue packet commands in the request queue, we need to
- *	allocate a request, along with the allocation of a packet command.
+ * Since we queue packet commands in the request queue, we need to allocate a
+ * request, along with a packet command.
  */
- 
-/**************************************************************
- *                                                            *
- *  This should get fixed to use kmalloc(.., GFP_ATOMIC)      *
- *  followed later on by kfree().   -ml                       *
- *                                                            *
- **************************************************************/
- 
-static struct request *idetape_next_rq_storage (ide_drive_t *drive)
+static struct request *ide_tape_alloc_rq(void)
 {
-	idetape_tape_t *tape = drive->driver_data;
+	struct request *rq;
 
-	debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index);
+	rq = kzalloc(sizeof(struct request), GFP_ATOMIC);
+	if (!rq)
+		printk(KERN_ERR "ide-tape: %s: memory allocation error.",
+				__func__);
 
-	if (tape->rq_stack_index == IDETAPE_PC_STACK)
-		tape->rq_stack_index=0;
-	return (&tape->rq_stack[tape->rq_stack_index++]);
+	return rq;
 }
 
 /*
@@ -980,9 +941,8 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 		}
 	}
 	ide_end_drive_cmd(drive, 0, 0);
-//	blkdev_dequeue_request(rq);
-//	drive->rq = NULL;
-//	end_that_request_last(rq);
+	kfree(tape->pc);
+	kfree(rq);
 
 	if (remove_stage)
 		idetape_remove_stage_head(drive);
@@ -1031,13 +991,9 @@ static void idetape_init_rq(struct request *rq, u8 cmd)
  *
  *	idetape_queue_pc_head is called from the request handling part of
  *	the driver (the "bottom" part). Safe storage for the request should
- *	be allocated with idetape_next_pc_storage and idetape_next_rq_storage
+ *	be allocated with ide_tape_alloc_pc and ide_tape_alloc_rq
  *	before calling idetape_queue_pc_head.
  *
- *	Memory for those requests is pre-allocated at initialization time, and
- *	is limited to IDETAPE_PC_STACK requests. We assume that we have enough
- *	space for the maximum possible number of inter-dependent packet commands.
- *
  *	The higher level of the driver - The ioctl handler and the character
  *	device handling functions should queue request to the lower level part
  *	and wait for their completion using idetape_queue_pc_tail or
@@ -1054,19 +1010,27 @@ static void idetape_queue_pc_head (ide_drive_t *drive, idetape_pc_t *pc,struct r
 }
 
 /*
- *	idetape_retry_pc is called when an error was detected during the
- *	last packet command. We queue a request sense packet command in
- *	the head of the request list.
+ * Called when an error was detected during the last packet command. We queue a
+ * request sense packet command in the head of the request list.
  */
-static ide_startstop_t idetape_retry_pc (ide_drive_t *drive)
+static ide_startstop_t idetape_retry_pc(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_pc_t *pc;
 	struct request *rq;
 
 	(void)drive->hwif->INB(IDE_ERROR_REG);
-	pc = idetape_next_pc_storage(drive);
-	rq = idetape_next_rq_storage(drive);
+	pc = ide_tape_alloc_pc();
+	rq = ide_tape_alloc_rq();
+
+	if (!pc || !rq) {
+		printk(KERN_ERR "ide-tape: Cannot retry packet command due to "
+				"low memory.");
+		kfree(pc);
+		kfree(rq);
+		return ide_stopped;
+	}
+
 	idetape_create_request_sense_cmd(pc);
 	set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
 	idetape_queue_pc_head(drive, pc, rq);
@@ -1706,21 +1670,33 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	if (rq->cmd[0] & REQ_IDETAPE_READ) {
 		tape->buffer_head++;
 		tape->postpone_cnt = 0;
-		pc = idetape_next_pc_storage(drive);
-		idetape_create_read_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special);
+		pc = ide_tape_alloc_pc();
+		if (!pc)
+			goto err;
+
+		idetape_create_read_cmd(tape, pc, rq->current_nr_sectors,
+				(struct idetape_bh *)rq->special);
 		goto out;
 	}
 	if (rq->cmd[0] & REQ_IDETAPE_WRITE) {
 		tape->buffer_head++;
 		tape->postpone_cnt = 0;
-		pc = idetape_next_pc_storage(drive);
-		idetape_create_write_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special);
+		pc = ide_tape_alloc_pc();
+		if (!pc)
+			goto err;
+
+		idetape_create_write_cmd(tape, pc, rq->current_nr_sectors,
+				(struct idetape_bh *)rq->special);
 		goto out;
 	}
 	if (rq->cmd[0] & REQ_IDETAPE_READ_BUFFER) {
 		tape->postpone_cnt = 0;
-		pc = idetape_next_pc_storage(drive);
-		idetape_create_read_buffer_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special);
+		pc = ide_tape_alloc_pc();
+		if (!pc)
+			goto err;
+
+		idetape_create_read_buffer_cmd(tape, pc, rq->current_nr_sectors,
+				(struct idetape_bh *)rq->special);
 		goto out;
 	}
 	if (rq->cmd[0] & REQ_IDETAPE_PC1) {
@@ -1736,6 +1712,11 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	BUG();
 out:
 	return idetape_issue_packet_command(drive, pc);
+
+err:
+	printk(KERN_ERR "ide-tape: Error processing request %u\n", rq->cmd[0]);
+	idetape_end_request(drive, 0, 0);
+	return ide_stopped;
 }
 
 /*
@@ -2041,7 +2022,7 @@ static void idetape_create_test_unit_ready_cmd(idetape_pc_t *pc)
  *	for an interrupt or a timer event.
  *
  *	From the bottom part of the driver, we should allocate safe memory
- *	using idetape_next_pc_storage and idetape_next_rq_storage, and add
+ *	using ide_tape_alloc_pc and ide_tape_alloc_rq, and add
  *	the request to the request list without waiting for it to be serviced !
  *	In that case, we usually use idetape_queue_pc_head.
  */
@@ -3571,7 +3552,6 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	tape->name[1] = 't';
 	tape->name[2] = '0' + minor;
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
-	tape->pc = tape->pc_stack;
 	tape->max_insert_speed = 10000;
 	tape->speed_control = 1;
 	*((unsigned short *) &gcw) = drive->id->config;
-- 
1.5.3.7

[PATCH 09/22] ide-tape: remove idetape_increase_max_pipeline_stages()

[Borislav Petkov]

This function was being used only at one place so fold it in there.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |   36 ++++++++++++++++--------------------
 1 files changed, 16 insertions(+), 20 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index b4944ef..ae2c76d 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -771,25 +771,6 @@ static void idetape_activate_next_stage(ide_drive_t *drive)
 }
 
 /*
- *	idetape_increase_max_pipeline_stages is a part of the feedback
- *	loop which tries to find the optimum number of stages. In the
- *	feedback loop, we are starting from a minimum maximum number of
- *	stages, and if we sense that the pipeline is empty, we try to
- *	increase it, until we reach the user compile time memory limit.
- */
-static void idetape_increase_max_pipeline_stages (ide_drive_t *drive)
-{
-	idetape_tape_t *tape = drive->driver_data;
-	int increase = (tape->max_pipeline - tape->min_pipeline) / 10;
-
-	debug_log(DBG_PROCS, "Enter %s\n", __func__);
-
-	tape->max_stages += max(increase, 1);
-	tape->max_stages = max(tape->max_stages, tape->min_pipeline);
-	tape->max_stages = min(tape->max_stages, tape->max_pipeline);
-}
-
-/*
  *	idetape_kfree_stage calls kfree to completely free a stage, along with
  *	its related buffers.
  */
@@ -937,7 +918,22 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 			(void)ide_do_drive_cmd(drive, tape->active_data_rq,
 						ide_end);
 		} else if (!error) {
-				idetape_increase_max_pipeline_stages(drive);
+			/*
+			 * This is a part of the feedback loop which tries to
+			 * find the optimum number of stages. We are starting
+			 * from a minimum maximum number of stages, and if we
+			 * sense that the pipeline is empty, we try to increase
+			 * it, until we reach the user compile time memory
+			 * limit.
+			 */
+			int i = (tape->max_pipeline - tape->min_pipeline) / 10;
+
+			tape->max_stages += max(i, 1);
+			tape->max_stages = max(tape->max_stages,
+						tape->min_pipeline);
+			tape->max_stages = min(tape->max_stages,
+						tape->max_pipeline);
+
 		}
 	}
 	ide_end_drive_cmd(drive, 0, 0);
-- 
1.5.3.7

[PATCH 10/22] ide-tape: shorten some function names

[Borislav Petkov]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |   32 +++++++++++++++-----------------
 1 files changed, 15 insertions(+), 17 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index ae2c76d..4fee160 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1053,7 +1053,7 @@ static void idetape_postpone_request (ide_drive_t *drive)
  * command. We will transfer some of the data (as requested by the drive) and
  * will re-point interrupt handler to us. When data transfer is finished, we
  * will act according to the algorithm described before
- * idetape_issue_packet_command.
+ * idetape_issue_pc.
  */
 
 typedef void idetape_io_buf(ide_drive_t *, idetape_pc_t *, unsigned int);
@@ -1233,7 +1233,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
  *
  *	The handling will be done in three stages:
  *
- *	1.	idetape_issue_packet_command will send the packet command to the
+ *	1.	idetape_issue_pc will send the packet command to the
  *		drive, and will set the interrupt handler to idetape_pc_intr.
  *
  *	2.	On each interrupt, idetape_pc_intr will be called. This step
@@ -1308,7 +1308,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
 	return ide_started;
 }
 
-static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape_pc_t *pc)
+static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	idetape_tape_t *tape = drive->driver_data;
@@ -1614,7 +1614,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	 */
 	if (tape->failed_pc != NULL &&
 	    tape->pc->c[0] == REQUEST_SENSE) {
-		return idetape_issue_packet_command(drive, tape->failed_pc);
+		return idetape_issue_pc(drive, tape->failed_pc);
 	}
 	if (postponed_rq != NULL)
 		if (rq != postponed_rq) {
@@ -1707,7 +1707,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	}
 	BUG();
 out:
-	return idetape_issue_packet_command(drive, pc);
+	return idetape_issue_pc(drive, pc);
 
 err:
 	printk(KERN_ERR "ide-tape: Error processing request %u\n", rq->cmd[0]);
@@ -2263,11 +2263,8 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct
 	return (tape->blk_size * (blocks-rq.current_nr_sectors));
 }
 
-/*
- *	idetape_insert_pipeline_into_queue is used to start servicing the
- *	pipeline stages, starting from tape->next_stage.
- */
-static void idetape_insert_pipeline_into_queue (ide_drive_t *drive)
+/* start servicing the pipeline stages, starting from tape->next_stage. */
+static void idetape_plug_pipeline(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
@@ -2359,7 +2356,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 			spin_unlock_irqrestore(&tape->lock, flags);
 		} else {
 			spin_unlock_irqrestore(&tape->lock, flags);
-			idetape_insert_pipeline_into_queue(drive);
+			idetape_plug_pipeline(drive);
 			if (idetape_pipeline_active(tape))
 				continue;
 			/*
@@ -2396,7 +2393,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 			tape->insert_time = jiffies;
 			tape->insert_size = 0;
 			tape->insert_speed = 0;
-			idetape_insert_pipeline_into_queue(drive);
+			idetape_plug_pipeline(drive);
 		}
 	}
 	if (test_and_clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
@@ -2415,7 +2412,7 @@ static void idetape_wait_for_pipeline (ide_drive_t *drive)
 	unsigned long flags;
 
 	while (tape->next_stage || idetape_pipeline_active(tape)) {
-		idetape_insert_pipeline_into_queue(drive);
+		idetape_plug_pipeline(drive);
 		spin_lock_irqsave(&tape->lock, flags);
 		if (idetape_pipeline_active(tape))
 			idetape_wait_for_request(drive, tape->active_data_rq);
@@ -2508,7 +2505,7 @@ static void idetape_restart_speed_control (ide_drive_t *drive)
 	tape->controlled_previous_head_time = tape->uncontrolled_previous_head_time = jiffies;
 }
 
-static int idetape_initiate_read (ide_drive_t *drive, int max_stages)
+static int idetape_init_read(ide_drive_t *drive, int max_stages)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_stage_t *new_stage;
@@ -2569,7 +2566,7 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages)
 			tape->insert_time = jiffies;
 			tape->insert_size = 0;
 			tape->insert_speed = 0;
-			idetape_insert_pipeline_into_queue(drive);
+			idetape_plug_pipeline(drive);
 		}
 	}
 	return 0;
@@ -2599,7 +2596,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 	 * Wait for the next block to be available at the head
 	 * of the pipeline
 	 */
-	idetape_initiate_read(drive, tape->max_stages);
+	idetape_init_read(drive, tape->max_stages);
 	if (tape->first_stage == NULL) {
 		if (test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
 			return 0;
@@ -2862,7 +2859,8 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
 			    (count % tape->blk_size) == 0)
 				tape->user_bs_factor = count / tape->blk_size;
 	}
-	if ((rc = idetape_initiate_read(drive, tape->max_stages)) < 0)
+	rc = idetape_init_read(drive, tape->max_stages);
+	if (rc < 0)
 		return rc;
 	if (count == 0)
 		return (0);
-- 
1.5.3.7

[PATCH 11/22] ide-tape: remove atomic test/set macros

[Borislav Petkov]

Also remove flag IDETAPE_READ_ERROR since it is unused.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |  226 +++++++++++++++++++++++++----------------------
 1 files changed, 120 insertions(+), 106 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 4fee160..1c4f94c 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -207,24 +207,24 @@ typedef struct idetape_packet_command_s {
 	u8 *current_position;			/* Pointer into the above buffer */
 	ide_startstop_t (*callback) (ide_drive_t *);	/* Called when this packet command is completed */
 	u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE];	/* Temporary buffer */
-	unsigned long flags;			/* Status/Action bit flags: long for set_bit */
+	unsigned int flags;
 } idetape_pc_t;
 
-/*
- *	Packet command flag bits.
- */
-/* Set when an error is considered normal - We won't retry */
-#define	PC_ABORT			0
-/* 1 When polling for DSC on a media access command */
-#define PC_WAIT_FOR_DSC			1
-/* 1 when we prefer to use DMA if possible */
-#define PC_DMA_RECOMMENDED		2
-/* 1 while DMA in progress */
-#define	PC_DMA_IN_PROGRESS		3
-/* 1 when encountered problem during DMA */
-#define	PC_DMA_ERROR			4
-/* Data direction */
-#define	PC_WRITING			5
+/* Packet command flag bits. */
+enum {
+	/* Set when an error is considered normal - We won't retry */
+	PC_FL_ABORT		= (1 << 0),
+	/* 1 When polling for DSC on a media access command */
+	PC_FL_WAIT_FOR_DSC	= (1 << 1),
+	/* 1 when we prefer to use DMA if possible */
+	PC_FL_DMA_RECOMMENDED	= (1 << 2),
+	/* 1 while DMA in progress */
+	PC_FL_DMA_IN_PROGRESS	= (1 << 3),
+	/* 1 when encountered problem during DMA */
+	PC_FL_DMA_ERROR		= (1 << 4),
+	/* Data direction */
+	PC_FL_WRITING		= (1 <<	5),
+};
 
 /*
  *	A pipeline stage.
@@ -354,8 +354,7 @@ typedef struct ide_tape_obj {
 	/* Wasted space in each stage */
 	int excess_bh_size;
 
-	/* Status/Action flags: long for set_bit */
-	unsigned long flags;
+	unsigned int flags;
 	/* protects the ide-tape queue */
 	spinlock_t lock;
 
@@ -458,20 +457,26 @@ static void ide_tape_put(struct ide_tape_obj *tape)
 #define DOOR_LOCKED			1
 #define DOOR_EXPLICITLY_LOCKED		2
 
-/*
- *	Tape flag bits values.
- */
-#define IDETAPE_IGNORE_DSC		0
-#define IDETAPE_ADDRESS_VALID		1	/* 0 When the tape position is unknown */
-#define IDETAPE_BUSY			2	/* Device already opened */
-#define IDETAPE_PIPELINE_ERROR		3	/* Error detected in a pipeline stage */
-#define IDETAPE_DETECT_BS		4	/* Attempt to auto-detect the current user block size */
-#define IDETAPE_FILEMARK		5	/* Currently on a filemark */
-#define IDETAPE_DRQ_INTERRUPT		6	/* DRQ interrupt device */
-#define IDETAPE_READ_ERROR		7
-#define IDETAPE_PIPELINE_ACTIVE		8	/* pipeline active */
-/* 0 = no tape is loaded, so we don't rewind after ejecting */
-#define IDETAPE_MEDIUM_PRESENT		9
+/* Tape flag bits values. */
+enum {
+	IDETAPE_FL_IGNORE_DSC		= (1 << 0),
+	/* 0 When the tape position is unknown */
+	IDETAPE_FL_ADDRESS_VALID	= (1 <<	1),
+	/* Device already opened */
+	IDETAPE_FL_BUSY			= (1 << 2),
+	/* Error detected in a pipeline stage */
+	IDETAPE_FL_PIPELINE_ERR	= (1 <<	3),
+	/* Attempt to auto-detect the current user block size */
+	IDETAPE_FL_DETECT_BS		= (1 << 4),
+	/* Currently on a filemark */
+	IDETAPE_FL_FILEMARK		= (1 << 5),
+	/* DRQ interrupt device */
+	IDETAPE_FL_DRQ_INTERRUPT	= (1 << 6),
+	/* pipeline active */
+	IDETAPE_FL_PIPELINE_ACTIVE	= (1 << 7),
+	/* 0 = no tape is loaded, so we don't rewind after ejecting */
+	IDETAPE_FL_MEDIUM_PRESENT	= (1 << 8),
+};
 
 /*
  *	Some defines for the READ BUFFER command
@@ -627,7 +632,7 @@ static void idetape_update_buffers (idetape_pc_t *pc)
 	int count;
 	unsigned int bcount = pc->actually_transferred;
 
-	if (test_bit(PC_WRITING, &pc->flags))
+	if (pc->flags & PC_FL_WRITING)
 		return;
 	while (bcount) {
 		if (bh == NULL) {
@@ -703,8 +708,8 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 	debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n",
 		 pc->c[0], tape->sense_key, tape->asc, tape->ascq);
 
-	/* Correct pc->actually_transferred by asking the tape.	 */
-	if (test_bit(PC_DMA_ERROR, &pc->flags)) {
+	/* Correct pc->actually_transferred by asking the tape. */
+	if (pc->flags & PC_FL_DMA_ERROR) {
 		pc->actually_transferred = pc->request_transfer -
 			tape->blk_size *
 			be32_to_cpu(get_unaligned((u32 *)&sense[3]));
@@ -723,27 +728,26 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 			/* don't report an error, everything's ok */
 			pc->error = 0;
 			/* don't retry read/write */
-			set_bit(PC_ABORT, &pc->flags);
+			pc->flags |= PC_FL_ABORT;
 		}
 	}
 	if (pc->c[0] == READ_6 && (sense[2] & 0x80)) {
 		pc->error = IDETAPE_ERROR_FILEMARK;
-		set_bit(PC_ABORT, &pc->flags);
+		pc->flags |= PC_FL_ABORT;
 	}
 	if (pc->c[0] == WRITE_6) {
 		if ((sense[2] & 0x40) || (tape->sense_key == 0xd
 		     && tape->asc == 0x0 && tape->ascq == 0x2)) {
 			pc->error = IDETAPE_ERROR_EOD;
-			set_bit(PC_ABORT, &pc->flags);
+			pc->flags |= PC_FL_ABORT;
 		}
 	}
 	if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
 		if (tape->sense_key == 8) {
 			pc->error = IDETAPE_ERROR_EOD;
-			set_bit(PC_ABORT, &pc->flags);
+			pc->flags |= PC_FL_ABORT;
 		}
-		if (!test_bit(PC_ABORT, &pc->flags) &&
-		    pc->actually_transferred)
+		if (!(pc->flags & PC_FL_ABORT) && pc->actually_transferred)
 			pc->retries = IDETAPE_MAX_PC_RETRIES + 1;
 	}
 }
@@ -899,13 +903,13 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 		if (rq->cmd[0] & REQ_IDETAPE_WRITE) {
 			remove_stage = 1;
 			if (error) {
-				set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+				tape->flags |= IDETAPE_FL_PIPELINE_ERR;
 				if (error == IDETAPE_ERROR_EOD)
 					idetape_abort_pipeline(drive, active_stage);
 			}
 		} else if (rq->cmd[0] & REQ_IDETAPE_READ) {
 			if (error == IDETAPE_ERROR_EOD) {
-				set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+				tape->flags |= IDETAPE_FL_PIPELINE_ERR;
 				idetape_abort_pipeline(drive, active_stage);
 			}
 		}
@@ -943,7 +947,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 	if (remove_stage)
 		idetape_remove_stage_head(drive);
 	if (tape->active_data_rq == NULL)
-		clear_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+		tape->flags &= ~IDETAPE_FL_PIPELINE_ACTIVE;
 	spin_unlock_irqrestore(&tape->lock, flags);
 	return 0;
 }
@@ -1028,7 +1032,7 @@ static ide_startstop_t idetape_retry_pc(ide_drive_t *drive)
 	}
 
 	idetape_create_request_sense_cmd(pc);
-	set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+	tape->flags |= IDETAPE_FL_IGNORE_DSC;
 	idetape_queue_pc_head(drive, pc, rq);
 	return ide_stopped;
 }
@@ -1077,7 +1081,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 	/* Clear the interrupt */
 	stat = hwif->INB(IDE_STATUS_REG);
 
-	if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+	if (pc->flags & PC_FL_DMA_IN_PROGRESS) {
 		if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) {
 			/*
 			 * A DMA error is sometimes expected. For example,
@@ -1100,7 +1104,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 			 * data transfer will occur, but no DMA error.
 			 * (AS, 19 Apr 2001)
 			 */
-			set_bit(PC_DMA_ERROR, &pc->flags);
+			pc->flags |= PC_FL_DMA_ERROR;
 		} else {
 			pc->actually_transferred = pc->request_transfer;
 			idetape_update_buffers(pc);
@@ -1114,7 +1118,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 		debug_log(DBG_SENSE, "Packet command completed, %d bytes"
 				" transferred\n", pc->actually_transferred);
 
-		clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
+		pc->flags &= ~PC_FL_DMA_IN_PROGRESS;
 		local_irq_enable();
 
 #if SIMULATE_ERRORS
@@ -1127,7 +1131,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 #endif
 		if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE)
 			stat &= ~ERR_STAT;
-		if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
+		if ((stat & ERR_STAT) || (pc->flags & PC_FL_DMA_ERROR)) {
 			/* Error detected */
 			debug_log(DBG_ERR, "%s: I/O error\n", tape->name);
 
@@ -1143,8 +1147,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 			return idetape_retry_pc(drive);
 		}
 		pc->error = 0;
-		if (test_bit(PC_WAIT_FOR_DSC, &pc->flags) &&
-		    (stat & SEEK_STAT) == 0) {
+		if ((pc->flags & PC_FL_WAIT_FOR_DSC) &&
+				(stat & SEEK_STAT) == 0) {
 			/* Media access command */
 			tape->dsc_polling_start = jiffies;
 			tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST;
@@ -1158,7 +1162,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 		/* Command finished - Call the callback function */
 		return pc->callback(drive);
 	}
-	if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+	if (pc->flags & PC_FL_DMA_IN_PROGRESS) {
+		pc->flags &= ~PC_FL_DMA_IN_PROGRESS;
 		printk(KERN_ERR "ide-tape: The tape wants to issue more "
 				"interrupts in DMA mode\n");
 		printk(KERN_ERR "ide-tape: DMA disabled, reverting to PIO\n");
@@ -1175,7 +1180,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 		printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__);
 		return ide_do_reset(drive);
 	}
-	if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) {
+	if (((ireason & IO) == IO) == !!(pc->flags & PC_FL_WRITING)) {
 		/* Hopefully, we will never get here */
 		printk(KERN_ERR "ide-tape: We wanted to %s, ",
 				(ireason & IO) ? "Write" : "Read");
@@ -1183,7 +1188,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 				(ireason & IO) ? "Read" : "Write");
 		return ide_do_reset(drive);
 	}
-	if (!test_bit(PC_WRITING, &pc->flags)) {
+	if (!(pc->flags & PC_FL_WRITING)) {
 		/* Reading - Check that we have enough space */
 		temp = pc->actually_transferred + bcount;
 		if (temp > pc->request_transfer) {
@@ -1300,7 +1305,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
 	ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
 #ifdef CONFIG_BLK_DEV_IDEDMA
 	/* Begin DMA, if necessary */
-	if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags))
+	if (pc->flags & PC_FL_DMA_IN_PROGRESS)
 		hwif->dma_start(drive);
 #endif
 	/* Send the actual packet */
@@ -1326,14 +1331,13 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
 	/* Set the current packet command */
 	tape->pc = pc;
 
-	if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
-	    test_bit(PC_ABORT, &pc->flags)) {
+	if (pc->retries > IDETAPE_MAX_PC_RETRIES || (pc->flags & PC_FL_ABORT)) {
 		/*
 		 *	We will "abort" retrying a packet command in case
 		 *	a legitimate error code was received (crossing a
 		 *	filemark, or end of the media, for example).
 		 */
-		if (!test_bit(PC_ABORT, &pc->flags)) {
+		if (!(pc->flags & PC_FL_ABORT)) {
 			if (!(pc->c[0] == TEST_UNIT_READY &&
 			      tape->sense_key == 2 && tape->asc == 4 &&
 			     (tape->ascq == 1 || tape->ascq == 8))) {
@@ -1359,20 +1363,21 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
 	/* Request to transfer the entire buffer at once */
 	bcount = pc->request_transfer;
 
-	if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) {
+	if (pc->flags & PC_FL_DMA_ERROR) {
+		pc->flags &= ~PC_FL_DMA_ERROR;
 		printk(KERN_WARNING "ide-tape: DMA disabled, "
 				"reverting to PIO\n");
 		ide_dma_off(drive);
 	}
-	if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
+	if ((pc->flags & PC_FL_DMA_RECOMMENDED) && drive->using_dma)
 		dma_ok = !hwif->dma_setup(drive);
 
 	ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
 			   IDE_TFLAG_OUT_DEVICE, bcount, dma_ok);
 
 	if (dma_ok)			/* Will begin DMA later */
-		set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
-	if (test_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags)) {
+		pc->flags |= PC_FL_DMA_IN_PROGRESS;
+	if (tape->flags & IDETAPE_FL_DRQ_INTERRUPT) {
 		ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc,
 				    IDETAPE_WAIT_CMD, NULL);
 		return ide_started;
@@ -1542,7 +1547,7 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsi
 	pc->buffer_size		= length * tape->blk_size;
 	pc->request_transfer	= length * tape->blk_size;
 	if (pc->request_transfer == tape->stage_size)
-		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+		pc->flags |= PC_FL_DMA_RECOMMENDED;
 }
 
 static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
@@ -1573,7 +1578,7 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, uns
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
 	pc->c[1] = 1;
 	pc->callback = &idetape_rw_callback;
-	set_bit(PC_WRITING, &pc->flags);
+	pc->flags |= PC_FL_WRITING;
 	pc->bh = bh;
 	pc->b_data = bh->b_data;
 	pc->b_count = atomic_read(&bh->b_count);
@@ -1581,7 +1586,7 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, uns
 	pc->request_transfer	= length * tape->blk_size;
 	pc->buffer_size		= length * tape->blk_size;
 	if (pc->request_transfer == tape->stage_size)
-		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+		pc->flags |= PC_FL_DMA_RECOMMENDED;
 }
 
 /*
@@ -1633,18 +1638,18 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	stat = drive->hwif->INB(IDE_STATUS_REG);
 
 	if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2))
-		set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+		tape->flags |= IDETAPE_FL_IGNORE_DSC;
 
 	if (drive->post_reset == 1) {
-		set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+		tape->flags |= IDETAPE_FL_IGNORE_DSC;
 		drive->post_reset = 0;
 	}
 
 	if (time_after(jiffies, tape->insert_time))
 		tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
 	idetape_calculate_speeds(drive);
-	if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) &&
-	    (stat & SEEK_STAT) == 0) {
+	if ((tape->flags & IDETAPE_FL_IGNORE_DSC) && (stat & SEEK_STAT) == 0) {
+		tape->flags &= ~IDETAPE_FL_IGNORE_DSC;
 		if (postponed_rq == NULL) {
 			tape->dsc_polling_start = jiffies;
 			tape->dsc_poll_freq = tape->best_dsc_rw_freq;
@@ -1722,7 +1727,7 @@ static inline int idetape_pipeline_active (idetape_tape_t *tape)
 {
 	int rc1, rc2;
 
-	rc1 = test_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+	rc1 = !!(tape->flags & IDETAPE_FL_PIPELINE_ACTIVE);
 	rc2 = (tape->active_data_rq != NULL);
 	return rc1;
 }
@@ -1960,7 +1965,7 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
 			printk(KERN_INFO "ide-tape: Block location is unknown"
 					"to the tape\n");
 
-			clear_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
+			tape->flags &= ~IDETAPE_FL_ADDRESS_VALID;
 			idetape_end_request(drive, 0, 0);
 		} else {
 			debug_log(DBG_SENSE, "Block Location - %u\n",
@@ -1969,7 +1974,7 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
 			tape->partition = readpos[1];
 			tape->first_frame =
 				be32_to_cpu(*(u32 *)&readpos[4]);
-			set_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
+			tape->flags |= IDETAPE_FL_ADDRESS_VALID;
 			idetape_end_request(drive, 1, 0);
 		}
 	} else {
@@ -1991,7 +1996,7 @@ static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t
 	idetape_init_pc(pc);
 	pc->c[0] = WRITE_FILEMARKS;
 	pc->c[4] = write_filemark;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2038,7 +2043,7 @@ static void idetape_create_load_unload_cmd (ide_drive_t *drive, idetape_pc_t *pc
 	idetape_init_pc(pc);
 	pc->c[0] = START_STOP;
 	pc->c[4] = cmd;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2051,7 +2056,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
 	/*
 	 * Wait for the tape to become ready
 	 */
-	set_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+	tape->flags |= IDETAPE_FL_MEDIUM_PRESENT;
 	timeout += jiffies;
 	while (time_before(jiffies, timeout)) {
 		idetape_create_test_unit_ready_cmd(&pc);
@@ -2120,7 +2125,7 @@ static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, uns
 	pc->c[1] = 2;
 	put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
 	pc->c[8] = partition;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2150,8 +2155,11 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
 
 	/* Remove merge stage. */
 	cnt = tape->merge_stage_size / tape->blk_size;
-	if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags))
-		++cnt;		/* Filemarks count as 1 sector */
+	if (tape->flags & IDETAPE_FL_FILEMARK) {
+		tape->flags &= ~IDETAPE_FL_FILEMARK;
+		/* Filemarks count as 1 sector */
+		++cnt;
+	}
 	tape->merge_stage_size = 0;
 	if (tape->merge_stage != NULL) {
 		__idetape_kfree_stage(tape->merge_stage);
@@ -2159,7 +2167,7 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
 	}
 
 	/* Clear pipeline flags. */
-	clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+	tape->flags &= ~IDETAPE_FL_PIPELINE_ERR;
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
 
 	/* Remove pipeline stages. */
@@ -2271,7 +2279,7 @@ static void idetape_plug_pipeline(ide_drive_t *drive)
 	if (tape->next_stage == NULL)
 		return;
 	if (!idetape_pipeline_active(tape)) {
-		set_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+		tape->flags |= IDETAPE_FL_PIPELINE_ACTIVE;
 		idetape_activate_next_stage(drive);
 		(void) ide_do_drive_cmd(drive, tape->active_data_rq, ide_end);
 	}
@@ -2289,7 +2297,7 @@ static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = REZERO_UNIT;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2298,7 +2306,7 @@ static void idetape_create_erase_cmd (idetape_pc_t *pc)
 	idetape_init_pc(pc);
 	pc->c[0] = ERASE;
 	pc->c[1] = 1;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2308,7 +2316,7 @@ static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd)
 	pc->c[0] = SPACE;
 	put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
 	pc->c[1] = cmd;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2396,9 +2404,11 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 			idetape_plug_pipeline(drive);
 		}
 	}
-	if (test_and_clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
+	if (tape->flags & IDETAPE_FL_PIPELINE_ERR) {
+		tape->flags &= ~IDETAPE_FL_PIPELINE_ERR;
 		/* Return a deferred error */
 		return -EIO;
+	}
 	return blocks;
 }
 
@@ -2469,7 +2479,7 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
 		__idetape_kfree_stage(tape->merge_stage);
 		tape->merge_stage = NULL;
 	}
-	clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+	tape->flags &= ~IDETAPE_FL_PIPELINE_ERR;
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
 
 	/*
@@ -2549,8 +2559,8 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
 	idetape_init_rq(&rq, REQ_IDETAPE_READ);
 	rq.sector = tape->first_frame;
 	rq.nr_sectors = rq.current_nr_sectors = blocks;
-	if (!test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags) &&
-	    tape->nr_stages < max_stages) {
+	if (!(tape->flags & IDETAPE_FL_PIPELINE_ERR) &&
+			tape->nr_stages < max_stages) {
 		new_stage = idetape_kmalloc_stage(tape);
 		while (new_stage != NULL) {
 			new_stage->rq = rq;
@@ -2589,7 +2599,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 	/*
 	 * If we are at a filemark, return a read length of 0
 	 */
-	if (test_bit(IDETAPE_FILEMARK, &tape->flags))
+	if (tape->flags & IDETAPE_FL_FILEMARK)
 		return 0;
 
 	/*
@@ -2598,7 +2608,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 	 */
 	idetape_init_read(drive, tape->max_stages);
 	if (tape->first_stage == NULL) {
-		if (test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
+		if (tape->flags & IDETAPE_FL_PIPELINE_ERR)
 			return 0;
 		return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
 					tape->merge_stage->bh);
@@ -2615,7 +2625,7 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 	else {
 		idetape_switch_buffers(tape, tape->first_stage);
 		if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK)
-			set_bit(IDETAPE_FILEMARK, &tape->flags);
+			tape->flags |= IDETAPE_FL_FILEMARK;
 		spin_lock_irqsave(&tape->lock, flags);
 		idetape_remove_stage_head(drive);
 		spin_unlock_irqrestore(&tape->lock, flags);
@@ -2769,12 +2779,14 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
 		 *	filemarks.
 		 */
 		tape->merge_stage_size = 0;
-		if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags))
+		if (tape->flags & IDETAPE_FL_FILEMARK) {
+			tape->flags &= ~IDETAPE_FL_FILEMARK;
 			++count;
+		}
 		while (tape->first_stage != NULL) {
 			if (count == mt_count) {
 				if (mt_op == MTFSFM)
-					set_bit(IDETAPE_FILEMARK, &tape->flags);
+					tape->flags |= IDETAPE_FL_FILEMARK;
 				return 0;
 			}
 			spin_lock_irqsave(&tape->lock, flags);
@@ -2854,7 +2866,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
 	if (tape->chrdev_dir != IDETAPE_DIR_READ) {
-		if (test_bit(IDETAPE_DETECT_BS, &tape->flags))
+		if (tape->flags & IDETAPE_FL_DETECT_BS)
 			if (count > tape->blk_size &&
 			    (count % tape->blk_size) == 0)
 				tape->user_bs_factor = count / tape->blk_size;
@@ -2893,7 +2905,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
 		tape->merge_stage_size = bytes_read-temp;
 	}
 finish:
-	if (!actually_read && test_bit(IDETAPE_FILEMARK, &tape->flags)) {
+	if (!actually_read && (tape->flags & IDETAPE_FL_FILEMARK)) {
 		debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
 
 		idetape_space_over_filemarks(drive, MTFSF, 1);
@@ -3077,7 +3089,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 			idetape_create_load_unload_cmd(drive, &pc,!IDETAPE_LU_LOAD_MASK);
 			retval = idetape_queue_pc_tail(drive, &pc);
 			if (!retval)
-				clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+				tape->flags &= ~IDETAPE_FL_MEDIUM_PRESENT;
 			return retval;
 		case MTNOP:
 			idetape_discard_read_pipeline(drive, 0);
@@ -3100,9 +3112,9 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 					return -EIO;
 				tape->user_bs_factor = mt_count /
 							tape->blk_size;
-				clear_bit(IDETAPE_DETECT_BS, &tape->flags);
+				tape->flags &= ~IDETAPE_FL_DETECT_BS;
 			} else
-				set_bit(IDETAPE_DETECT_BS, &tape->flags);
+				tape->flags |= IDETAPE_FL_DETECT_BS;
 			return 0;
 		case MTSEEK:
 			idetape_discard_read_pipeline(drive, 0);
@@ -3227,7 +3239,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
 	ide_drive_t *drive;
 	idetape_tape_t *tape;
 	idetape_pc_t pc;
-	int retval;
+	int retval, testval;
 
 	if (i >= MAX_HWIFS * MAX_DRIVES)
 		return -ENXIO;
@@ -3249,24 +3261,26 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
 
 	filp->private_data = tape;
 
-	if (test_and_set_bit(IDETAPE_BUSY, &tape->flags)) {
+	testval = tape->flags & IDETAPE_FL_BUSY;
+	tape->flags |= IDETAPE_FL_BUSY;
+	if (testval) {
 		retval = -EBUSY;
 		goto out_put_tape;
 	}
 
 	retval = idetape_wait_ready(drive, 60 * HZ);
 	if (retval) {
-		clear_bit(IDETAPE_BUSY, &tape->flags);
+		tape->flags &= ~IDETAPE_FL_BUSY;
 		printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
 		goto out_put_tape;
 	}
 
 	idetape_read_position(drive);
-	if (!test_bit(IDETAPE_ADDRESS_VALID, &tape->flags))
+	if (!(tape->flags & IDETAPE_FL_ADDRESS_VALID))
 		(void)idetape_rewind_tape(drive);
 
 	if (tape->chrdev_dir != IDETAPE_DIR_READ)
-		clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+		tape->flags &= ~IDETAPE_FL_PIPELINE_ERR;
 
 	/* Read block size and write protect status from drive. */
 	ide_tape_get_bsize_from_bdesc(drive);
@@ -3281,7 +3295,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
 	if (tape->write_prot) {
 		if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
 		    (filp->f_flags & O_ACCMODE) == O_RDWR) {
-			clear_bit(IDETAPE_BUSY, &tape->flags);
+			tape->flags &= ~IDETAPE_FL_BUSY;
 			retval = -EROFS;
 			goto out_put_tape;
 		}
@@ -3351,7 +3365,7 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp)
 		__idetape_kfree_stage(tape->cache_stage);
 		tape->cache_stage = NULL;
 	}
-	if (minor < 128 && test_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags))
+	if (minor < 128 && (tape->flags & IDETAPE_FL_MEDIUM_PRESENT))
 		(void) idetape_rewind_tape(drive);
 	if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
 		if (tape->door_locked == DOOR_LOCKED) {
@@ -3361,7 +3375,7 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp)
 			}
 		}
 	}
-	clear_bit(IDETAPE_BUSY, &tape->flags);
+	tape->flags &= ~IDETAPE_FL_BUSY;
 	ide_tape_put(tape);
 	unlock_kernel();
 	return 0;
@@ -3550,7 +3564,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	tape->speed_control = 1;
 	*((unsigned short *) &gcw) = drive->id->config;
 	if (gcw.drq_type == 1)
-		set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags);
+		tape->flags |= IDETAPE_FL_DRQ_INTERRUPT;
 
 	tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10;
 	
-- 
1.5.3.7

[PATCH 12/22] ide-tape: dump gcw fields on error in idetape_identify_device()

[Borislav Petkov]

goes before "ide-tape: remove IDETAPE_DEBUG_INFO" patch in IDE quilt tree

Cc: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-tape.c |   13 +++++++------
 1 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 1c4f94c..712c5df 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -3402,16 +3402,17 @@ static int idetape_identify_device (ide_drive_t *drive)
 
 	/* Check that we can support this device */
 
-	if (gcw.protocol !=2 )
-		printk(KERN_ERR "ide-tape: Protocol is not ATAPI\n");
+	if (gcw.protocol != 2)
+		printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n",
+				gcw.protocol);
 	else if (gcw.device_type != 1)
-		printk(KERN_ERR "ide-tape: Device type is not set to tape\n");
+		printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set "
+				"to tape\n", gcw.device_type);
 	else if (!gcw.removable)
 		printk(KERN_ERR "ide-tape: The removable flag is not set\n");
 	else if (gcw.packet_size != 0) {
-		printk(KERN_ERR "ide-tape: Packet size is not 12 bytes long\n");
-		if (gcw.packet_size == 1)
-			printk(KERN_ERR "ide-tape: Sorry, padding to 16 bytes is still not supported\n");
+		printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12 "
+				"bytes long\n", gcw.packet_size);
 	} else
 		return 1;
 	return 0;
-- 
1.5.3.7

[PATCH 13/22] ide-tape: remove struct idetape_id_gcw

[Borislav Petkov]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |   58 ++++++++++++++++++++---------------------------
 1 files changed, 25 insertions(+), 33 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 712c5df..175d507 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -520,20 +520,6 @@ enum {
 #define	IDETAPE_ERROR_FILEMARK		102
 #define	IDETAPE_ERROR_EOD		103
 
-/*
- *	The following is used to format the general configuration word of
- *	the ATAPI IDENTIFY DEVICE command.
- */
-struct idetape_id_gcw {	
-	unsigned packet_size		:2;	/* Packet Size */
-	unsigned reserved234		:3;	/* Reserved */
-	unsigned drq_type		:2;	/* Command packet DRQ type */
-	unsigned removable		:1;	/* Removable media */
-	unsigned device_type		:5;	/* Device type */
-	unsigned reserved13		:1;	/* Reserved */
-	unsigned protocol		:2;	/* Protocol type */
-};
-
 /* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
 #define IDETAPE_BLOCK_DESCRIPTOR	0
 #define	IDETAPE_CAPABILITIES_PAGE	0x2a
@@ -3382,37 +3368,41 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp)
 }
 
 /*
- *	idetape_identify_device is called to check the contents of the
- *	ATAPI IDENTIFY command results. We return:
+ * check the contents of the ATAPI IDENTIFY command results. We return:
  *
- *	1	If the tape can be supported by us, based on the information
- *		we have so far.
+ * 1 - If the tape can be supported by us, based on the information we have so
+ * far.
  *
- *	0 	If this tape driver is not currently supported by us.
+ * 0 - If this tape driver is not currently supported by us.
  */
-static int idetape_identify_device (ide_drive_t *drive)
+static int idetape_identify_device(ide_drive_t *drive)
 {
-	struct idetape_id_gcw gcw;
-	struct hd_driveid *id = drive->id;
+
+	u8 gcw[2];
+	u8 protocol, device_type, removable, packet_size;
 
 	if (drive->id_read == 0)
 		return 1;
 
-	*((unsigned short *) &gcw) = id->config;
+	*((unsigned short *) &gcw) = drive->id->config;
 
-	/* Check that we can support this device */
+	protocol	=   (gcw[1] & 0xC0) >> 6;
+	device_type	=    gcw[1] & 0x1F;
+	removable	= !!(gcw[0] & 0x80);
+	packet_size	=    gcw[0] & 0x3;
 
-	if (gcw.protocol != 2)
+	/* Check that we can support this device */
+	if (protocol != 2)
 		printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n",
-				gcw.protocol);
-	else if (gcw.device_type != 1)
+			protocol);
+	else if (device_type != 1)
 		printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set "
-				"to tape\n", gcw.device_type);
-	else if (!gcw.removable)
+				"to tape\n", device_type);
+	else if (!removable)
 		printk(KERN_ERR "ide-tape: The removable flag is not set\n");
-	else if (gcw.packet_size != 0) {
+	else if (packet_size != 0) {
 		printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12 "
-				"bytes long\n", gcw.packet_size);
+				"bytes long\n", packet_size);
 	} else
 		return 1;
 	return 0;
@@ -3541,8 +3531,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 {
 	unsigned long t1, tmid, tn, t;
 	int speed;
-	struct idetape_id_gcw gcw;
 	int stage_size;
+	u8 gcw[2];
 	struct sysinfo si;
 	u16 *ctl = (u16 *)&tape->caps[12];
 
@@ -3564,7 +3554,9 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	tape->max_insert_speed = 10000;
 	tape->speed_control = 1;
 	*((unsigned short *) &gcw) = drive->id->config;
-	if (gcw.drq_type == 1)
+
+	/* Command packet DRQ type */
+	if (((gcw[0] & 0x60) >> 5) == 1)
 		tape->flags |= IDETAPE_FL_DRQ_INTERRUPT;
 
 	tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10;
-- 
1.5.3.7

[PATCH 14/22] ide-tape: cleanup and fix comments

[Borislav Petkov]

Also, remove redundant ones and cleanup whitespace.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |  725 +++++++++++++++++++----------------------------
 1 files changed, 293 insertions(+), 432 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 175d507..a80f8d9 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -73,37 +73,34 @@ enum {
 
 
 /*
- *	Pipelined mode parameters.
+ * Pipelined mode parameters.
  *
- *	We try to use the minimum number of stages which is enough to
- *	keep the tape constantly streaming. To accomplish that, we implement
- *	a feedback loop around the maximum number of stages:
+ * We try to use the minimum number of stages which is enough to keep the tape
+ * constantly streaming. To accomplish that, we implement a feedback loop around
+ * the maximum number of stages:
  *
- *	We start from MIN maximum stages (we will not even use MIN stages
- *      if we don't need them), increment it by RATE*(MAX-MIN)
- *	whenever we sense that the pipeline is empty, until we reach
- *	the optimum value or until we reach MAX.
+ * We start from MIN maximum stages (we will not even use MIN stages if we don't
+ * need them), increment it by RATE*(MAX-MIN) whenever we sense that the
+ * pipeline is empty, until we reach the optimum value or until we reach MAX.
  *
- *	Setting the following parameter to 0 is illegal: the pipelined mode
- *	cannot be disabled (idetape_calculate_speeds() divides by
- *	tape->max_stages.)
+ * Setting the following parameter to 0 is illegal: the pipelined mode cannot be
+ * disabled (idetape_calculate_speeds() divides by tape->max_stages.)
  */
 #define IDETAPE_MIN_PIPELINE_STAGES	  1
 #define IDETAPE_MAX_PIPELINE_STAGES	400
 #define IDETAPE_INCREASE_STAGES_RATE	 20
 
 /*
- *	After each failed packet command we issue a request sense command
- *	and retry the packet command IDETAPE_MAX_PC_RETRIES times.
+ * After each failed packet command we issue a request sense command and retry
+ * the packet command IDETAPE_MAX_PC_RETRIES times.
  *
- *	Setting IDETAPE_MAX_PC_RETRIES to 0 will disable retries.
+ * Setting IDETAPE_MAX_PC_RETRIES to 0 will disable retries.
  */
 #define IDETAPE_MAX_PC_RETRIES		3
 
 /*
- *	With each packet command, we allocate a buffer of
- *	IDETAPE_PC_BUFFER_SIZE bytes. This is used for several packet
- *	commands (Not for READ/WRITE commands).
+ * With each packet command, we allocate a buffer of IDETAPE_PC_BUFFER_SIZE
+ * bytes. This is used for several packet commands (Not for READ/WRITE commands)
  */
 #define IDETAPE_PC_BUFFER_SIZE		256
 
@@ -115,48 +112,41 @@ enum {
 #define IDETAPE_WAIT_CMD		(900*HZ)
 
 /*
- *	The following parameter is used to select the point in the internal
- *	tape fifo in which we will start to refill the buffer. Decreasing
- *	the following parameter will improve the system's latency and
- *	interactive response, while using a high value might improve system
- *	throughput.
+ * The following parameter is used to select the point in the internal tape fifo
+ * in which we will start to refill the buffer. Decreasing the following
+ * parameter will improve the system's latency and interactive response, while
+ * using a high value might improve system throughput.
  */
-#define IDETAPE_FIFO_THRESHOLD 		2
+#define IDETAPE_FIFO_THRESHOLD		2
 
 /*
- *	DSC polling parameters.
+ * DSC polling parameters.
  *
- *	Polling for DSC (a single bit in the status register) is a very
- *	important function in ide-tape. There are two cases in which we
- *	poll for DSC:
+ * Polling for DSC (a single bit in the status register) is a very important
+ * function in ide-tape. There are two cases in which we poll for DSC:
  *
- *	1.	Before a read/write packet command, to ensure that we
- *		can transfer data from/to the tape's data buffers, without
- *		causing an actual media access. In case the tape is not
- *		ready yet, we take out our request from the device
- *		request queue, so that ide.c will service requests from
- *		the other device on the same interface meanwhile.
  *
- *	2.	After the successful initialization of a "media access
- *		packet command", which is a command which can take a long
- *		time to complete (it can be several seconds or even an hour).
+ * 1. Before a read/write packet command, to ensure that we can transfer data
+ *    from/to the tape's data buffers, without causing an actual media access.
+ *    In case the tape is not ready yet, we take out our request from the device
+ *    request queue, so that ide.c could service requests from the other device
+ *    on the same interface in the meantime.
  *
- *		Again, we postpone our request in the middle to free the bus
- *		for the other device. The polling frequency here should be
- *		lower than the read/write frequency since those media access
- *		commands are slow. We start from a "fast" frequency -
- *		IDETAPE_DSC_MA_FAST (one second), and if we don't receive DSC
- *		after IDETAPE_DSC_MA_THRESHOLD (5 minutes), we switch it to a
- *		lower frequency - IDETAPE_DSC_MA_SLOW (1 minute).
+ * 2. After the successful initialization of a "media access packet command",
+ *    which is a command that can take a long time to complete (the interval can
+ *    range from several seconds to even an hour).
  *
- *	We also set a timeout for the timer, in case something goes wrong.
- *	The timeout should be longer then the maximum execution time of a
- *	tape operation.
- */
- 
-/*
- *	DSC timings.
+ * Again, we postpone our request in the middle to free the bus for the other
+ * device. The polling frequency here should be lower than the read/write
+ * frequency since those media access commands are slow. We start from a "fast"
+ * frequency - IDETAPE_DSC_MA_FAST (one second), and if we don't receive DSC
+ * after IDETAPE_DSC_MA_THRESHOLD (5 minutes), we switch it to a lower frequency
+ * - IDETAPE_DSC_MA_SLOW (1 minute). We also set a timeout for the timer, in
+ * case something goes wrong. The timeout should be longer then the maximum
+ * execution time of a tape operation.
  */
+
+/* DSC timings. */
 #define IDETAPE_DSC_RW_MIN		5*HZ/100	/* 50 msec */
 #define IDETAPE_DSC_RW_MAX		40*HZ/100	/* 400 msec */
 #define IDETAPE_DSC_RW_TIMEOUT		2*60*HZ		/* 2 minutes */
@@ -167,15 +157,9 @@ enum {
 
 /*************************** End of tunable parameters ***********************/
 
-/*
- *	Read/Write error simulation
- */
+/* Read/Write error simulation */
 #define SIMULATE_ERRORS			0
 
-/*
- *	For general magnetic tape device compatibility.
- */
-
 /* tape directions */
 enum {
 	IDETAPE_DIR_NONE  = (1 << 0),
@@ -190,23 +174,30 @@ struct idetape_bh {
 	char *b_data;
 };
 
-/*
- *	Our view of a packet command.
- */
 typedef struct idetape_packet_command_s {
-	u8 c[12];				/* Actual packet bytes */
-	int retries;				/* On each retry, we increment retries */
-	int error;				/* Error code */
-	int request_transfer;			/* Bytes to transfer */
-	int actually_transferred;		/* Bytes actually transferred */
-	int buffer_size;			/* Size of our data buffer */
+	/* Actual packet bytes */
+	u8 c[12];
+	/* On each retry, we increment retries */
+	int retries;
+	/* Error code */
+	int error;
+	/* Bytes to transfer */
+	int request_transfer;
+	/* Bytes actually transferred */
+	int actually_transferred;
+	/* Size of our data buffer */
+	int buffer_size;
 	struct idetape_bh *bh;
 	char *b_data;
 	int b_count;
-	u8 *buffer;				/* Data buffer */
-	u8 *current_position;			/* Pointer into the above buffer */
-	ide_startstop_t (*callback) (ide_drive_t *);	/* Called when this packet command is completed */
-	u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE];	/* Temporary buffer */
+	/* Data buffer */
+	u8 *buffer;
+	/* Pointer into the above buffer */
+	u8 *current_position;
+	/* Called when this packet command is completed */
+	ide_startstop_t (*callback) (ide_drive_t *);
+	/* Temporary buffer */
+	u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE];
 	unsigned int flags;
 } idetape_pc_t;
 
@@ -226,9 +217,7 @@ enum {
 	PC_FL_WRITING		= (1 <<	5),
 };
 
-/*
- *	A pipeline stage.
- */
+/* A pipeline stage. */
 typedef struct idetape_stage_s {
 	struct request rq;			/* The corresponding request */
 	struct idetape_bh *bh;			/* The data buffers */
@@ -236,9 +225,8 @@ typedef struct idetape_stage_s {
 } idetape_stage_t;
 
 /*
- *	Most of our global data which we need to save even as we leave the
- *	driver due to an interrupt or a timer event is stored in a variable
- *	of type idetape_tape_t, defined below.
+ * Most of our global data which we need to save even as we leave the driver due
+ * to an interrupt or a timer event is stored in the struct defined below.
  */
 typedef struct ide_tape_obj {
 	ide_drive_t	*drive;
@@ -257,15 +245,14 @@ typedef struct ide_tape_obj {
 	idetape_pc_t *failed_pc;
 
 	/*
-	 *	DSC polling variables.
+	 * DSC polling variables.
 	 *
-	 *	While polling for DSC we use postponed_rq to postpone the
-	 *	current request so that ide.c will be able to service
-	 *	pending requests on the other device. Note that at most
-	 *	we will have only one DSC (usually data transfer) request
-	 *	in the device request queue. Additional requests can be
-	 *	queued in our internal pipeline, but they will be visible
-	 *	to ide.c only one at a time.
+	 * While polling for DSC we use postponed_rq to postpone the current
+	 * request so that ide.c will be able to service pending requests on the
+	 * other device. Note that at most we will have only one DSC (usually
+	 * data transfer) request in the device request queue. Additional
+	 * requests can be queued in our internal pipeline, but they will be
+	 * visible to ide.c only one at a time.
 	 */
 	struct request *postponed_rq;
 	/* The time in which we started polling for DSC */
@@ -277,21 +264,15 @@ typedef struct ide_tape_obj {
 	unsigned long dsc_poll_freq;
 	unsigned long dsc_timeout;
 
-	/*
-	 *	Read position information
-	 */
+	/* Read position information */
 	u8 partition;
 	/* Current block */
 	unsigned int first_frame;
 
-	/*
-	 *	Last error information
-	 */
+	/* Last error information */
 	u8 sense_key, asc, ascq;
 
-	/*
-	 *	Character device operation
-	 */
+	/* Character device operation */
 	unsigned int minor;
 	/* device name */
 	char name[4];
@@ -306,33 +287,30 @@ typedef struct ide_tape_obj {
 	u8 caps[20];
 
 	/*
-	 *	Active data transfer request parameters.
+	 * Active data transfer request parameters.
 	 *
-	 *	At most, there is only one ide-tape originated data transfer
-	 *	request in the device request queue. This allows ide.c to
-	 *	easily service requests from the other device when we
-	 *	postpone our active request. In the pipelined operation
-	 *	mode, we use our internal pipeline structure to hold
-	 *	more data requests.
-	 *
-	 *	The data buffer size is chosen based on the tape's
-	 *	recommendation.
+	 * At most, there is only one ide-tape originated data transfer request
+	 * in the device request queue. This allows ide.c to easily service
+	 * requests from the other device when we postpone our active request.
+	 * In the pipelined operation mode, we use our internal pipeline
+	 * structure to hold more data requests. The data buffer size is chosen
+	 * based on the tape's recommendation.
 	 */
-	/* Ptr to the request which is waiting in the device request queue */
+	/* ptr to the request which is waiting in the device request queue */
 	struct request *active_data_rq;
-	/* Data buffer size (chosen based on the tape's recommendation */
+	/* Data buffer size chosen based on the tape's recommendation */
 	int stage_size;
 	idetape_stage_t *merge_stage;
 	int merge_stage_size;
 	struct idetape_bh *bh;
 	char *b_data;
 	int b_count;
-	
+
 	/*
-	 *	Pipeline parameters.
+	 * Pipeline parameters.
 	 *
-	 *	To accomplish non-pipelined mode, we simply set the following
-	 *	variables to zero (or NULL, where appropriate).
+	 * To accomplish non-pipelined mode, we simply set the following
+	 * variables to zero (or NULL, where appropriate).
 	 */
 	/* Number of currently used stages */
 	int nr_stages;
@@ -358,9 +336,7 @@ typedef struct ide_tape_obj {
 	/* protects the ide-tape queue */
 	spinlock_t lock;
 
-	/*
-	 * Measures average tape speed
-	 */
+	/* Measures average tape speed */
 	unsigned long avg_time;
 	int avg_size;
 	int avg_speed;
@@ -373,11 +349,9 @@ typedef struct ide_tape_obj {
 	char write_prot;
 
 	/*
-	 * Limit the number of times a request can
-	 * be postponed, to avoid an infinite postpone
-	 * deadlock.
+	 * Limit the number of times a request can be postponed, to avoid an
+	 * infinite postpone deadlock.
 	 */
-	/* request postpone count limit */
 	int postpone_cnt;
 
 	/*
@@ -392,18 +366,14 @@ typedef struct ide_tape_obj {
 	int tape_head;
 	int last_tape_head;
 
-	/*
-	 * Speed control at the tape buffers input/output
-	 */
+	/* Speed control at the tape buffers input/output */
 	unsigned long insert_time;
 	int insert_size;
 	int insert_speed;
 	int max_insert_speed;
 	int measure_insert_time;
 
-	/*
-	 * Speed regulation negative feedback loop
-	 */
+	/* Speed regulation negative feedback loop */
 	int speed_control;
 	int pipeline_head_speed;
 	int controlled_pipeline_head_speed;
@@ -450,9 +420,7 @@ static void ide_tape_put(struct ide_tape_obj *tape)
 	mutex_unlock(&idetape_ref_mutex);
 }
 
-/*
- *	Tape door status
- */
+/* Tape door status */
 #define DOOR_UNLOCKED			0
 #define DOOR_LOCKED			1
 #define DOOR_EXPLICITLY_LOCKED		2
@@ -478,30 +446,23 @@ enum {
 	IDETAPE_FL_MEDIUM_PRESENT	= (1 << 8),
 };
 
-/*
- *	Some defines for the READ BUFFER command
- */
+/* A define for the READ BUFFER command */
 #define IDETAPE_RETRIEVE_FAULTY_BLOCK	6
 
-/*
- *	Some defines for the SPACE command
- */
+/* Some defines for the SPACE command */
 #define IDETAPE_SPACE_OVER_FILEMARK	1
 #define IDETAPE_SPACE_TO_EOD		3
 
-/*
- *	Some defines for the LOAD UNLOAD command
- */
+/* Some defines for the LOAD UNLOAD command */
 #define IDETAPE_LU_LOAD_MASK		1
 #define IDETAPE_LU_RETENSION_MASK	2
 #define IDETAPE_LU_EOT_MASK		4
 
 /*
- *	Special requests for our block device strategy routine.
+ * Special requests for our block device strategy routine.
  *
- *	In order to service a character device command, we add special
- *	requests to the tail of our block device request queue and wait
- *	for their completion.
+ * In order to service a character device command, we add special requests to
+ * the tail of our block device request queue and wait for their completion.
  */
 
 enum {
@@ -512,10 +473,7 @@ enum {
 	REQ_IDETAPE_READ_BUFFER	= (1 << 4),
 };
 
-/*
- *	Error codes which are returned in rq->errors to the higher part
- *	of the driver.
- */
+/* Error codes returned in rq->errors to the higher part of the driver. */
 #define	IDETAPE_ERROR_GENERAL		101
 #define	IDETAPE_ERROR_FILEMARK		102
 #define	IDETAPE_ERROR_EOD		103
@@ -525,8 +483,8 @@ enum {
 #define	IDETAPE_CAPABILITIES_PAGE	0x2a
 
 /*
- *	The variables below are used for the character device interface.
- *	Additional state variables are defined in our ide_drive_t structure.
+ * The variables below are used for the character device interface. Additional
+ * state variables are defined in our ide_drive_t structure.
  */
 static struct ide_tape_obj * idetape_devs[MAX_HWIFS * MAX_DRIVES];
 
@@ -544,10 +502,6 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
 	return tape;
 }
 
-/*
- *      Function declarations
- *
- */
 static int idetape_chrdev_release (struct inode *inode, struct file *filp);
 static void idetape_write_release (ide_drive_t *drive, unsigned int minor);
 
@@ -663,9 +617,6 @@ static struct request *ide_tape_alloc_rq(void)
 	return rq;
 }
 
-/*
- *	idetape_init_pc initializes a packet command.
- */
 static void idetape_init_pc (idetape_pc_t *pc)
 {
 	memset(pc->c, 0, 12);
@@ -703,8 +654,8 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 	}
 
 	/*
-	 * If error was the result of a zero-length read or write command,
-	 * with sense key=5, asc=0x22, ascq=0, let it slide.  Some drives
+	 * If error was the result of a zero-length read or write command, with
+	 * sense key=5, asc=0x22, ascq=0, let it slide.  Some drives
 	 * (i.e. Seagate STT3401A Travan) don't support 0-length read/writes.
 	 */
 	if ((pc->c[0] == READ_6 || pc->c[0] == WRITE_6)
@@ -760,10 +711,7 @@ static void idetape_activate_next_stage(ide_drive_t *drive)
 	tape->next_stage = stage->next;
 }
 
-/*
- *	idetape_kfree_stage calls kfree to completely free a stage, along with
- *	its related buffers.
- */
+/* Free a stage along with its related buffers completely. */
 static void __idetape_kfree_stage (idetape_stage_t *stage)
 {
 	struct idetape_bh *prev_bh, *bh = stage->bh;
@@ -791,8 +739,8 @@ static void idetape_kfree_stage (idetape_tape_t *tape, idetape_stage_t *stage)
 }
 
 /*
- *	idetape_remove_stage_head removes tape->first_stage from the pipeline.
- *	The caller should avoid race conditions.
+ * Remove tape->first_stage from the pipeline. The caller should avoid race
+ * conditions.
  */
 static void idetape_remove_stage_head (ide_drive_t *drive)
 {
@@ -850,8 +798,8 @@ static void idetape_abort_pipeline(ide_drive_t *drive,
 }
 
 /*
- *	idetape_end_request is used to finish servicing a request, and to
- *	insert a pending pipeline request into the main device queue.
+ * Finish servicing a request and insert a pending pipeline request into the
+ * main device queue.
  */
 static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 {
@@ -902,9 +850,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 		if (tape->next_stage != NULL) {
 			idetape_activate_next_stage(drive);
 
-			/*
-			 * Insert the next request into the request queue.
-			 */
+			/* Insert the next request into the request queue. */
 			(void)ide_do_drive_cmd(drive, tape->active_data_rq,
 						ide_end);
 		} else if (!error) {
@@ -971,19 +917,16 @@ static void idetape_init_rq(struct request *rq, u8 cmd)
 }
 
 /*
- *	idetape_queue_pc_head generates a new packet command request in front
- *	of the request queue, before the current request, so that it will be
- *	processed immediately, on the next pass through the driver.
+ * Generate a new packet command request in front of the request queue, before
+ * the current request, so that it will be processed immediately, on the next
+ * pass through the driver. The function below is called from the request
+ * handling part of the driver (the "bottom" part). Safe storage for the request
+ * should be allocated with ide_tape_alloc_pc and ide_tape_alloc_rq prior to
+ * that.
  *
- *	idetape_queue_pc_head is called from the request handling part of
- *	the driver (the "bottom" part). Safe storage for the request should
- *	be allocated with ide_tape_alloc_pc and ide_tape_alloc_rq
- *	before calling idetape_queue_pc_head.
- *
- *	The higher level of the driver - The ioctl handler and the character
- *	device handling functions should queue request to the lower level part
- *	and wait for their completion using idetape_queue_pc_tail or
- *	idetape_queue_rw_tail.
+ * The higher level of the driver - The ioctl handler and the character device
+ * handling functions should queue request to the lower level part and wait for
+ * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail.
  */
 static void idetape_queue_pc_head (ide_drive_t *drive, idetape_pc_t *pc,struct request *rq)
 {
@@ -1024,9 +967,8 @@ static ide_startstop_t idetape_retry_pc(ide_drive_t *drive)
 }
 
 /*
- *	idetape_postpone_request postpones the current request so that
- *	ide.c will be able to service requests from another device on
- *	the same hwgroup while we are polling for DSC.
+ * Postpone the current request so that ide.c will be able to service requests
+ * from another device on the same hwgroup while we are polling for DSC.
  */
 static void idetape_postpone_request (ide_drive_t *drive)
 {
@@ -1038,6 +980,9 @@ static void idetape_postpone_request (ide_drive_t *drive)
 	ide_stall_queue(drive, tape->dsc_poll_freq);
 }
 
+
+typedef void idetape_io_buf(ide_drive_t *, idetape_pc_t *, unsigned int);
+
 /*
  * This is the usual interrupt handler which will be called during a packet
  * command. We will transfer some of the data (as requested by the drive) and
@@ -1045,9 +990,6 @@ static void idetape_postpone_request (ide_drive_t *drive)
  * will act according to the algorithm described before
  * idetape_issue_pc.
  */
-
-typedef void idetape_io_buf(ide_drive_t *, idetape_pc_t *, unsigned int);
-
 static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
@@ -1070,25 +1012,24 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 	if (pc->flags & PC_FL_DMA_IN_PROGRESS) {
 		if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) {
 			/*
-			 * A DMA error is sometimes expected. For example,
-			 * if the tape is crossing a filemark during a
-			 * READ command, it will issue an irq and position
-			 * itself before the filemark, so that only a partial
-			 * data transfer will occur (which causes the DMA
-			 * error). In that case, we will later ask the tape
-			 * how much bytes of the original request were
-			 * actually transferred (we can't receive that
-			 * information from the DMA engine on most chipsets).
+			 * A DMA error is sometimes expected. For example, if
+			 * the tape is crossing a filemark during a READ
+			 * command, it will issue an irq and position itself
+			 * before the filemark, so that only a partial data
+			 * transfer will occur (which causes the DMA error). In
+			 * that case, we will later ask the tape how much bytes
+			 * of the original request were actually transferred (we
+			 * can't receive that information from the DMA engine on
+			 * most chipsets).
 			 */
 
 			/*
-			 * On the contrary, a DMA error is never expected;
-			 * it usually indicates a hardware error or abort.
-			 * If the tape crosses a filemark during a READ
-			 * command, it will issue an irq and position itself
-			 * after the filemark (not before). Only a partial
-			 * data transfer will occur, but no DMA error.
-			 * (AS, 19 Apr 2001)
+			 * On the contrary, a DMA error is never expected; it
+			 * usually indicates a hardware error or abort. If the
+			 * tape crosses a filemark during a READ command, it
+			 * will issue an irq and position itself after the
+			 * filemark (not before). Only a partial data transfer
+			 * will occur, but no DMA error. (AS, 19 Apr 2001)
 			 */
 			pc->flags |= PC_FL_DMA_ERROR;
 		} else {
@@ -1215,46 +1156,40 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 }
 
 /*
- *	Packet Command Interface
- *
- *	The current Packet Command is available in tape->pc, and will not
- *	change until we finish handling it. Each packet command is associated
- *	with a callback function that will be called when the command is
- *	finished.
+ * Packet Command Interface
  *
- *	The handling will be done in three stages:
+ * The current Packet Command is available in tape->pc, and will not change
+ * until we finish handling it. Each packet command is associated with a
+ * callback function that will be called when the command is finished.
  *
- *	1.	idetape_issue_pc will send the packet command to the
- *		drive, and will set the interrupt handler to idetape_pc_intr.
+ * The handling will be done in three stages:
  *
- *	2.	On each interrupt, idetape_pc_intr will be called. This step
- *		will be repeated until the device signals us that no more
- *		interrupts will be issued.
+ * 1. idetape_issue_pc will send the packet command to the drive, and will set
+ * the interrupt handler to idetape_pc_intr.
  *
- *	3.	ATAPI Tape media access commands have immediate status with a
- *		delayed process. In case of a successful initiation of a
- *		media access packet command, the DSC bit will be set when the
- *		actual execution of the command is finished. 
- *		Since the tape drive will not issue an interrupt, we have to
- *		poll for this event. In this case, we define the request as
- *		"low priority request" by setting rq_status to
- *		IDETAPE_RQ_POSTPONED, 	set a timer to poll for DSC and exit
- *		the driver.
+ * 2. On each interrupt, idetape_pc_intr will be called. This step will be
+ * repeated until the device signals us that no more interrupts will be issued.
  *
- *		ide.c will then give higher priority to requests which
- *		originate from the other device, until will change rq_status
- *		to RQ_ACTIVE.
+ * 3. ATAPI Tape media access commands have immediate status with a delayed
+ * process. In case of a successful initiation of a media access packet command,
+ * the DSC bit will be set when the actual execution of the command is finished.
+ * Since the tape drive will not issue an interrupt, we have to poll for this
+ * event. In this case, we define the request as "low priority request" by
+ * setting rq_status to	IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and
+ * exit	the driver.
  *
- *	4.	When the packet command is finished, it will be checked for errors.
+ * ide.c will then give higher priority to requests which originate from the
+ * other device, until will change rq_status to RQ_ACTIVE.
  *
- *	5.	In case an error was found, we queue a request sense packet
- *		command in front of the request queue and retry the operation
- *		up to IDETAPE_MAX_PC_RETRIES times.
+ * 4. When the packet command is finished, it will be checked for errors.
  *
- *	6.	In case no error was found, or we decided to give up and not
- *		to retry again, the callback function will be called and then
- *		we will handle the next request.
+ * 5. In case an error was found, we queue a request sense packet command in
+ * front of the request queue and retry the operation up to
+ * IDETAPE_MAX_PC_RETRIES times.
  *
+ * 6. In case no error was found, or we decided to give up and not to retry
+ * again, the callback function will be called and then we will handle the next
+ * request.
  */
 static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
 {
@@ -1319,9 +1254,9 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
 
 	if (pc->retries > IDETAPE_MAX_PC_RETRIES || (pc->flags & PC_FL_ABORT)) {
 		/*
-		 *	We will "abort" retrying a packet command in case
-		 *	a legitimate error code was received (crossing a
-		 *	filemark, or end of the media, for example).
+		 * We will "abort" retrying a packet command in case legitimate
+		 * error code was received (crossing a filemark, or end of the
+		 * media, for example).
 		 */
 		if (!(pc->flags & PC_FL_ABORT)) {
 			if (!(pc->c[0] == TEST_UNIT_READY &&
@@ -1373,9 +1308,6 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
 	}
 }
 
-/*
- *	General packet command callback function.
- */
 static ide_startstop_t idetape_pc_callback (ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
@@ -1386,25 +1318,25 @@ static ide_startstop_t idetape_pc_callback (ide_drive_t *drive)
 	return ide_stopped;
 }
 
-/*
- *	A mode sense command is used to "sense" tape parameters.
- */
+/* A mode sense command is used to "sense" tape parameters. */
 static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = MODE_SENSE;
 	if (page_code != IDETAPE_BLOCK_DESCRIPTOR)
-		pc->c[1] = 8;	/* DBD = 1 - Don't return block descriptors */
+		/* DBD = 1 - Don't return block descriptors */
+		pc->c[1] = 8;
 	pc->c[2] = page_code;
 	/*
 	 * Changed pc->c[3] to 0 (255 will at best return unused info).
 	 *
-	 * For SCSI this byte is defined as subpage instead of high byte
-	 * of length and some IDE drives seem to interpret it this way
-	 * and return an error when 255 is used.
+	 * For SCSI this byte is defined as subpage instead of high byte of
+	 * length and some IDE drives seem to interpret it this way and return
+	 * an error when 255 is used.
 	 */
 	pc->c[3] = 0;
-	pc->c[4] = 255;		/* (We will just discard data in that case) */
+	/* We will just discard data in that case */
+	pc->c[4] = 255;
 	if (page_code == IDETAPE_BLOCK_DESCRIPTOR)
 		pc->request_transfer = 12;
 	else if (page_code == IDETAPE_CAPABILITIES_PAGE)
@@ -1575,9 +1507,6 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, uns
 		pc->flags |= PC_FL_DMA_RECOMMENDED;
 }
 
-/*
- * idetape_do_request is our request handling function.	
- */
 static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 					  struct request *rq, sector_t block)
 {
@@ -1591,18 +1520,14 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 			rq->sector, rq->nr_sectors, rq->current_nr_sectors);
 
 	if (!blk_special_request(rq)) {
-		/*
-		 * We do not support buffer cache originated requests.
-		 */
+		/* We do not support buffer cache originated requests. */
 		printk(KERN_NOTICE "ide-tape: %s: Unsupported request in "
 			"request queue (%d)\n", drive->name, rq->cmd_type);
 		ide_end_request(drive, 0, 0);
 		return ide_stopped;
 	}
 
-	/*
-	 *	Retry a failed packet command
-	 */
+	/* Retry a failed packet command */
 	if (tape->failed_pc != NULL &&
 	    tape->pc->c[0] == REQUEST_SENSE) {
 		return idetape_issue_pc(drive, tape->failed_pc);
@@ -1618,8 +1543,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	tape->postponed_rq = NULL;
 
 	/*
-	 * If the tape is still busy, postpone our request and service
-	 * the other device meanwhile.
+	 * If the tape is still busy, postpone our request and service the other
+	 * device meanwhile.
 	 */
 	stat = drive->hwif->INB(IDE_STATUS_REG);
 
@@ -1706,9 +1631,7 @@ err:
 	return ide_stopped;
 }
 
-/*
- *	Pipeline related functions
- */
+/* Pipeline related functions */
 static inline int idetape_pipeline_active (idetape_tape_t *tape)
 {
 	int rc1, rc2;
@@ -1719,16 +1642,16 @@ static inline int idetape_pipeline_active (idetape_tape_t *tape)
 }
 
 /*
- *	idetape_kmalloc_stage uses __get_free_page to allocate a pipeline
- *	stage, along with all the necessary small buffers which together make
- *	a buffer of size tape->stage_size (or a bit more). We attempt to
- *	combine sequential pages as much as possible.
+ * The function below uses __get_free_page to allocate a pipeline stage, along
+ * with all the necessary small buffers which together make a buffer of size
+ * tape->stage_size (or a bit more). We attempt to combine sequential pages as
+ * much as possible.
  *
- *	Returns a pointer to the new allocated stage, or NULL if we
- *	can't (or don't want to) allocate a stage.
+ * It returns a pointer to the new allocated stage, or NULL if we can't (or
+ * don't want to) allocate a stage.
  *
- *	Pipeline stages are optional and are used to increase performance.
- *	If we can't allocate them, we'll manage without them.
+ * Pipeline stages are optional and are used to increase performance. If we
+ * can't allocate them, we'll manage without them.
  */
 static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full, int clear)
 {
@@ -1886,9 +1809,7 @@ static void idetape_switch_buffers (idetape_tape_t *tape, idetape_stage_t *stage
 	idetape_init_merge_stage(tape);
 }
 
-/*
- *	idetape_add_stage_tail adds a new stage at the end of the pipeline.
- */
+/* Add a new stage at the end of the pipeline. */
 static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage)
 {
 	idetape_tape_t *tape = drive->driver_data;
@@ -1910,12 +1831,9 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage)
 	spin_unlock_irqrestore(&tape->lock, flags);
 }
 
-/*
- *	idetape_wait_for_request installs a completion in a pending request
- *	and sleeps until it is serviced.
- *
- *	The caller should ensure that the request will not be serviced
- *	before we install the completion (usually by disabling interrupts).
+/* Install a completion in a pending request and sleep until it is serviced. The
+ * caller should ensure that the request will not be serviced before we install
+ * the completion (usually by disabling interrupts).
  */
 static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq)
 {
@@ -1970,12 +1888,8 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
 }
 
 /*
- *	idetape_create_write_filemark_cmd will:
- *
- *		1.	Write a filemark if write_filemark=1.
- *		2.	Flush the device buffers without writing a filemark
- *			if write_filemark=0.
- *
+ * Write a filemark if write_filemark=1. Flush the device buffers without
+ * writing a filemark otherwise.
  */
 static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t *pc,int write_filemark)
 {
@@ -1994,24 +1908,17 @@ static void idetape_create_test_unit_ready_cmd(idetape_pc_t *pc)
 }
 
 /*
- *	idetape_queue_pc_tail is based on the following functions:
- *
- *	ide_do_drive_cmd from ide.c
- *	cdrom_queue_request and cdrom_queue_packet_command from ide-cd.c
- *
- *	We add a special packet command request to the tail of the request
- *	queue, and wait for it to be serviced.
- *
- *	This is not to be called from within the request handling part
- *	of the driver ! We allocate here data in the stack, and it is valid
- *	until the request is finished. This is not the case for the bottom
- *	part of the driver, where we are always leaving the functions to wait
- *	for an interrupt or a timer event.
+ * We add a special packet command request to the tail of the request queue, and
+ * wait for it to be serviced. This is not to be called from within the request
+ * handling part of the driver! We allocate here data on the stack and it is
+ * valid until the request is finished. This is not the case for the bottom part
+ * of the driver, where we are always leaving the functions to wait for an
+ * interrupt or a timer event.
  *
- *	From the bottom part of the driver, we should allocate safe memory
- *	using ide_tape_alloc_pc and ide_tape_alloc_rq, and add
- *	the request to the request list without waiting for it to be serviced !
- *	In that case, we usually use idetape_queue_pc_head.
+ * From the bottom part of the driver, we should allocate safe memory using
+ * ide_tape_alloc_pc() and ide_tape_alloc_rq(), and add the request to the
+ * request list without waiting for it to be serviced! In that case, we usually
+ * use idetape_queue_pc_head().
  */
 static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc)
 {
@@ -2039,9 +1946,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
 	idetape_pc_t pc;
 	int load_attempted = 0;
 
-	/*
-	 * Wait for the tape to become ready
-	 */
+	/* Wait for the tape to become ready */
 	tape->flags |= IDETAPE_FL_MEDIUM_PRESENT;
 	timeout += jiffies;
 	while (time_before(jiffies, timeout)) {
@@ -2049,7 +1954,8 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
 		if (!__idetape_queue_pc_tail(drive, &pc))
 			return 0;
 		if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2)
-		    || (tape->asc == 0x3A)) {	/* no media */
+		    || (tape->asc == 0x3A)) {
+			/* no media */
 			if (load_attempted)
 				return -ENOMEDIUM;
 			idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK);
@@ -2180,13 +2086,10 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
 }
 
 /*
- *	idetape_position_tape positions the tape to the requested block
- *	using the LOCATE packet command. A READ POSITION command is then
- *	issued to check where we are positioned.
- *
- *	Like all higher level operations, we queue the commands at the tail
- *	of the request queue and wait for their completion.
- *	
+ * Position the tape to the requested block using the LOCATE packet command.
+ * A READ POSITION command is then issued to check where we are positioned. Like
+ * all higher level operations, we queue the commands at the tail of the request
+ * queue and wait for their completion.
  */
 static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 partition, int skip)
 {
@@ -2224,8 +2127,8 @@ static void idetape_discard_read_pipeline (ide_drive_t *drive, int restore_posit
 }
 
 /*
- * idetape_queue_rw_tail generates a read/write request for the block
- * device interface and wait for it to be serviced.
+ * Generate a read/write request for the block device interface and wait for it
+ * to be serviced.
  */
 static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh)
 {
@@ -2320,15 +2223,15 @@ static void idetape_wait_first_stage (ide_drive_t *drive)
 }
 
 /*
- *	idetape_add_chrdev_write_request tries to add a character device
- *	originated write request to our pipeline. In case we don't succeed,
- *	we revert to non-pipelined operation mode for this request.
+ * Try to add a character device originated write request to our pipeline. In
+ * case we don't succeed, we revert to non-pipelined operation mode for this
+ * request. In order to accomplish that, we
  *
- *	1.	Try to allocate a new pipeline stage.
- *	2.	If we can't, wait for more and more requests to be serviced
- *		and try again each time.
- *	3.	If we still can't allocate a stage, fallback to
- *		non-pipelined operation mode for this request.
+ * 1. Try to allocate a new pipeline stage.
+ * 2. If we can't, wait for more and more requests to be serviced and try again
+ * each time.
+ * 3. If we still can't allocate a stage, fallback to non-pipelined operation
+ * mode for this request.
  */
 static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 {
@@ -2339,10 +2242,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 
 	debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
 
-     	/*
-     	 *	Attempt to allocate a new stage.
-	 *	Pay special attention to possible race conditions.
-	 */
+	/* Attempt to allocate a new stage. Beware possible race conditions. */
 	while ((new_stage = idetape_kmalloc_stage(tape)) == NULL) {
 		spin_lock_irqsave(&tape->lock, flags);
 		if (idetape_pipeline_active(tape)) {
@@ -2354,8 +2254,8 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 			if (idetape_pipeline_active(tape))
 				continue;
 			/*
-			 *	Linux is short on memory. Fallback to
-			 *	non-pipelined operation mode for this request.
+			 * The machine is short on memory. Fallback to non-
+			 * pipelined operation mode for this request.
 			 */
 			return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh);
 		}
@@ -2372,11 +2272,11 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 	idetape_calculate_speeds(drive);
 
 	/*
-	 *	Estimate whether the tape has stopped writing by checking
-	 *	if our write pipeline is currently empty. If we are not
-	 *	writing anymore, wait for the pipeline to be full enough
-	 *	(90%) before starting to service requests, so that we will
-	 *	be able to keep up with the higher speeds of the tape.
+	 * Estimate whether the tape has stopped writing by checking if our
+	 * write pipeline is currently empty. If we are not writing anymore,
+	 * wait for the pipeline to be almost completely full (90%) before
+	 * starting to service requests, so that we will be able to keep up with
+	 * the higher speeds of the tape.
 	 */
 	if (!idetape_pipeline_active(tape)) {
 		if (tape->nr_stages >= tape->max_stages * 9 / 10 ||
@@ -2399,8 +2299,8 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 }
 
 /*
- *	idetape_wait_for_pipeline will wait until all pending pipeline
- *	requests are serviced. Typically called on device close.
+ * Wait until all pending pipeline requests are serviced. Typically called on
+ * device close.
  */
 static void idetape_wait_for_pipeline (ide_drive_t *drive)
 {
@@ -2469,10 +2369,10 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
 
 	/*
-	 *	On the next backup, perform the feedback loop again.
-	 *	(I don't want to keep sense information between backups,
-	 *	 as some systems are constantly on, and the system load
-	 *	 can be totally different on the next backup).
+	 * On the next backup, perform the feedback loop again. (I don't want to
+	 * keep sense information between backups, as some systems are
+	 * constantly on, and the system load can be totally different on the
+	 * next backup).
 	 */
 	tape->max_stages = tape->min_pipeline;
 	if (tape->first_stage != NULL ||
@@ -2524,11 +2424,10 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
 		tape->chrdev_dir = IDETAPE_DIR_READ;
 
 		/*
-		 *	Issue a read 0 command to ensure that DSC handshake
-		 *	is switched from completion mode to buffer available
-		 *	mode.
-		 *	No point in issuing this if DSC overlap isn't supported,
-		 *	some drives (Seagate STT3401A) will return an error.
+		 * Issue a read 0 command to ensure that DSC handshake is
+		 * switched from completion mode to buffer available mode.
+		 * No point in issuing this if DSC overlap isn't supported, some
+		 * drives (Seagate STT3401A) will return an error.
 		 */
 		if (drive->dsc_overlap) {
 			bytes_read = idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, 0, tape->merge_stage->bh);
@@ -2569,9 +2468,8 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
 }
 
 /*
- *	idetape_add_chrdev_read_request is called from idetape_chrdev_read
- *	to service a character device read request and add read-ahead
- *	requests to our pipeline.
+ * Called from idetape_chrdev_read() to service a character device read request
+ * and add read-ahead requests to our pipeline.
  */
 static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 {
@@ -2582,16 +2480,11 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 
 	debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
 
-	/*
-	 * If we are at a filemark, return a read length of 0
-	 */
+	/* If we are at a filemark, return a read length of 0 */
 	if (tape->flags & IDETAPE_FL_FILEMARK)
 		return 0;
 
-	/*
-	 * Wait for the next block to be available at the head
-	 * of the pipeline
-	 */
+	/* Wait for the next block to reach the head of the pipeline. */
 	idetape_init_read(drive, tape->max_stages);
 	if (tape->first_stage == NULL) {
 		if (tape->flags & IDETAPE_FL_PIPELINE_ERR)
@@ -2630,7 +2523,7 @@ static void idetape_pad_zeros (ide_drive_t *drive, int bcount)
 	idetape_tape_t *tape = drive->driver_data;
 	struct idetape_bh *bh;
 	int blocks;
-	
+
 	while (bcount) {
 		unsigned int count;
 
@@ -2670,10 +2563,9 @@ static int idetape_pipeline_size (ide_drive_t *drive)
 }
 
 /*
- *	Rewinds the tape to the Beginning Of the current Partition (BOP).
- *
- *	We currently support only one partition.
- */ 
+ * Rewinds the tape to the Beginning Of the current Partition (BOP). We
+ * currently support only one partition.
+ */
 static int idetape_rewind_tape (ide_drive_t *drive)
 {
 	int retval;
@@ -2695,13 +2587,7 @@ static int idetape_rewind_tape (ide_drive_t *drive)
 	return 0;
 }
 
-/*
- *	Our special ide-tape ioctl's.
- *
- *	Currently there aren't any ioctl's.
- *	mtio.h compatible commands should be issued to the character device
- *	interface.
- */
+/* mtio.h compatible commands should be issued to the chrdev interface. */
 static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned long arg)
 {
 	idetape_tape_t *tape = drive->driver_data;
@@ -2735,13 +2621,11 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l
 }
 
 /*
- *	idetape_space_over_filemarks is now a bit more complicated than just
- *	passing the command to the tape since we may have crossed some
- *	filemarks during our pipelined read-ahead mode.
- *
- *	As a minor side effect, the pipeline enables us to support MTFSFM when
- *	the filemark is in our internal pipeline even if the tape doesn't
- *	support spacing over filemarks in the reverse direction.
+ * The function below is now a bit more complicated than just passing the
+ * command to the tape since we may have crossed some filemarks during our
+ * pipelined read-ahead mode. As a minor side effect, the pipeline enables us to
+ * support MTFSFM when the filemark is in our internal pipeline even if the tape
+ * doesn't support spacing over filemarks in the reverse direction.
  */
 static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_count)
 {
@@ -2760,10 +2644,7 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
 	}
 
 	if (tape->chrdev_dir == IDETAPE_DIR_READ) {
-		/*
-		 *	We have a read-ahead buffer. Scan it for crossed
-		 *	filemarks.
-		 */
+		/* its a read-ahead buffer, scan it for crossed filemarks. */
 		tape->merge_stage_size = 0;
 		if (tape->flags & IDETAPE_FL_FILEMARK) {
 			tape->flags &= ~IDETAPE_FL_FILEMARK;
@@ -2778,13 +2659,15 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
 			spin_lock_irqsave(&tape->lock, flags);
 			if (tape->first_stage == tape->active_stage) {
 				/*
-				 *	We have reached the active stage in the read pipeline.
-				 *	There is no point in allowing the drive to continue
-				 *	reading any farther, so we stop the pipeline.
+				 * We have reached the active stage in the read
+				 * pipeline. There is no point in allowing the
+				 * drive to continue reading any farther, so we
+				 * stop the pipeline.
 				 *
-				 *	This section should be moved to a separate subroutine,
-				 *	because a similar function is performed in
-				 *	__idetape_discard_read_pipeline(), for example.
+				 * This section should be moved to a separate
+				 * subroutine because similar operations are
+				 * done in __idetape_discard_read_pipeline(),
+				 * for example.
 				 */
 				tape->next_stage = NULL;
 				spin_unlock_irqrestore(&tape->lock, flags);
@@ -2800,8 +2683,8 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
 	}
 
 	/*
-	 *	The filemark was not found in our internal pipeline.
-	 *	Now we can issue the space command.
+	 * The filemark was not found in our internal pipeline;	now we can issue
+	 * the space command.
 	 */
 	switch (mt_op) {
 		case MTFSF:
@@ -2824,21 +2707,19 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
 
 
 /*
- *	Our character device read / write functions.
+ * Our character device read / write functions.
  *
- *	The tape is optimized to maximize throughput when it is transferring
- *	an integral number of the "continuous transfer limit", which is
- *	a parameter of the specific tape (26 KB on my particular tape).
- *      (32 kB for Onstream)
+ * The tape is optimized to maximize throughput when it is transferring an
+ * integral number of the "continuous transfer limit", which is a parameter of
+ * the specific tape (26kB on my particular tape, 32kB for Onstream).
  *
- *	As of version 1.3 of the driver, the character device provides an
- *	abstract continuous view of the media - any mix of block sizes (even 1
- *	byte) on the same backup/restore procedure is supported. The driver
- *	will internally convert the requests to the recommended transfer unit,
- *	so that an unmatch between the user's block size to the recommended
- *	size will only result in a (slightly) increased driver overhead, but
- *	will no longer hit performance.
- *      This is not applicable to Onstream.
+ * As of version 1.3 of the driver, the character device provides an abstract
+ * continuous view of the media - any mix of block sizes (even 1 byte) on the
+ * same backup/restore procedure is supported. The driver will internally
+ * convert the requests to the recommended transfer unit, so that an unmatch
+ * between the user's block size to the recommended size will only result in a
+ * (slightly) increased driver overhead, but will no longer hit performance.
+ * This is not applicable to Onstream.
  */
 static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
 				    size_t count, loff_t *ppos)
@@ -2931,11 +2812,10 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
 		idetape_init_merge_stage(tape);
 
 		/*
-		 *	Issue a write 0 command to ensure that DSC handshake
-		 *	is switched from completion mode to buffer available
-		 *	mode.
-		 *	No point in issuing this if DSC overlap isn't supported,
-		 *	some drives (Seagate STT3401A) will return an error.
+		 * Issue a write 0 command to ensure that DSC handshake is
+		 * switched from completion mode to buffer available mode. No
+		 * point in issuing this if DSC overlap isn't supported, some
+		 * drives (Seagate STT3401A) will return an error.
 		 */
 		if (drive->dsc_overlap) {
 			ssize_t retval = idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, 0, tape->merge_stage->bh);
@@ -3026,9 +2906,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 
 	debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n",
 			mt_op, mt_count);
-	/*
-	 *	Commands which need our pipelined read-ahead stages.
-	 */
+	/* Commands which need our pipelined read-ahead stages. */
 	switch (mt_op) {
 		case MTFSF:
 		case MTFSFM:
@@ -3216,9 +3094,6 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
 	tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7;
 }
 
-/*
- *	Our character device open function.
- */
 static int idetape_chrdev_open (struct inode *inode, struct file *filp)
 {
 	unsigned int minor = iminor(inode), i = minor & ~0xc0;
@@ -3287,9 +3162,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp)
 		}
 	}
 
-	/*
-	 * Lock the tape drive door so user can't eject.
-	 */
+	/* Lock the tape drive door so user can't eject. */
 	if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
 		if (idetape_create_prevent_cmd(drive, &pc, 1)) {
 			if (!idetape_queue_pc_tail(drive, &pc)) {
@@ -3324,9 +3197,6 @@ static void idetape_write_release (ide_drive_t *drive, unsigned int minor)
 	idetape_flush_tape_buffers(drive);
 }
 
-/*
- *	Our character device release function.
- */
 static int idetape_chrdev_release (struct inode *inode, struct file *filp)
 {
 	struct ide_tape_obj *tape = ide_tape_f(filp);
@@ -3487,9 +3357,6 @@ static void idetape_add_settings (ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
-/*
- *			drive	setting name		read/write	data type	min			max			mul_factor			div_factor	data pointer				set function
- */
 	ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff,
 			1, 2, (u16 *)&tape->caps[16], NULL);
 	ide_add_setting(drive,	"pipeline_min",		SETTING_RW,	TYPE_INT,	1,			0xffff,			tape->stage_size / 1024,	1,		&tape->min_pipeline,			NULL);
@@ -3516,16 +3383,14 @@ static inline void idetape_add_settings(ide_drive_t *drive) { ; }
 #endif
 
 /*
- *	ide_setup is called to:
+ * The function below is called to:
  *
- *		1.	Initialize our various state variables.
- *		2.	Ask the tape for its capabilities.
- *		3.	Allocate a buffer which will be used for data
- *			transfer. The buffer size is chosen based on
- *			the recommendation which we received in step (2).
- *
- *	Note that at this point ide.c already assigned us an irq, so that
- *	we can queue requests here and wait for their completion.
+ * 1. Initialize our various state variables.
+ * 2. Ask the tape for its capabilities.
+ * 3. Allocate a buffer which will be used for data transfer. The buffer size is
+ * chosen based on the recommendation which we received in step 2. Note that at
+ * this point ide.c already assigned us an irq, so that we can queue requests
+ * here and wait for their completion.
  */
 static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 {
@@ -3560,7 +3425,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 		tape->flags |= IDETAPE_FL_DRQ_INTERRUPT;
 
 	tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10;
-	
+
 	idetape_get_inquiry_results(drive);
 	idetape_get_mode_sense_results(drive);
 	ide_tape_get_bsize_from_bdesc(drive);
@@ -3583,9 +3448,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 
 	tape->max_stages = speed * 1000 * 10 / tape->stage_size;
 
-	/*
-	 * 	Limit memory use for pipeline to 10% of physical memory
-	 */
+	/* Limit memory use for pipeline to 10% of physical memory */
 	si_meminfo(&si);
 	if (tape->max_stages * tape->stage_size > si.totalram * si.mem_unit / 10)
 		tape->max_stages = si.totalram * si.mem_unit / (10 * tape->stage_size);
@@ -3605,8 +3468,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 		t = t1;
 
 	/*
-	 *	Ensure that the number we got makes sense; limit
-	 *	it within IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX.
+	 * Ensure that the number we got makes sense; limit it within
+	 * IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX.
 	 */
 	tape->best_dsc_rw_freq = max_t(unsigned long,
 				min_t(unsigned long, t, IDETAPE_DSC_RW_MAX),
@@ -3694,9 +3557,7 @@ static ide_driver_t idetape_driver = {
 #endif
 };
 
-/*
- *	Our character device supporting functions, passed to register_chrdev.
- */
+/* Our character device supporting functions, passed to register_chrdev. */
 static const struct file_operations idetape_fops = {
 	.owner		= THIS_MODULE,
 	.read		= idetape_chrdev_read,
-- 
1.5.3.7

Re: [PATCH 14/22] ide-tape: cleanup and fix comments

[Bartlomiej Zolnierkiewicz]

On Monday 04 February 2008, Borislav Petkov wrote:
> Also, remove redundant ones and cleanup whitespace.
> 
> Signed-off-by: Borislav Petkov <petkovbb@gmail.com>

fixed few minor issues while merging the patch:

> ---
>  drivers/ide/ide-tape.c |  725 +++++++++++++++++++----------------------------
>  1 files changed, 293 insertions(+), 432 deletions(-)
> 
> diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
> index 175d507..a80f8d9 100644
> --- a/drivers/ide/ide-tape.c
> +++ b/drivers/ide/ide-tape.c

[...]

>  /*
> - *	DSC polling parameters.
> + * DSC polling parameters.
>   *
> - *	Polling for DSC (a single bit in the status register) is a very
> - *	important function in ide-tape. There are two cases in which we
> - *	poll for DSC:
> + * Polling for DSC (a single bit in the status register) is a very important
> + * function in ide-tape. There are two cases in which we poll for DSC:
>   *
> - *	1.	Before a read/write packet command, to ensure that we
> - *		can transfer data from/to the tape's data buffers, without
> - *		causing an actual media access. In case the tape is not
> - *		ready yet, we take out our request from the device
> - *		request queue, so that ide.c will service requests from
> - *		the other device on the same interface meanwhile.
>   *
> - *	2.	After the successful initialization of a "media access
> - *		packet command", which is a command which can take a long
> - *		time to complete (it can be several seconds or even an hour).
> + * 1. Before a read/write packet command, to ensure that we can transfer data
> + *    from/to the tape's data buffers, without causing an actual media access.
> + *    In case the tape is not ready yet, we take out our request from the device
> + *    request queue, so that ide.c could service requests from the other device
> + *    on the same interface in the meantime.
>   *
> - *		Again, we postpone our request in the middle to free the bus
> - *		for the other device. The polling frequency here should be
> - *		lower than the read/write frequency since those media access
> - *		commands are slow. We start from a "fast" frequency -
> - *		IDETAPE_DSC_MA_FAST (one second), and if we don't receive DSC
> - *		after IDETAPE_DSC_MA_THRESHOLD (5 minutes), we switch it to a
> - *		lower frequency - IDETAPE_DSC_MA_SLOW (1 minute).
> + * 2. After the successful initialization of a "media access packet command",
> + *    which is a command that can take a long time to complete (the interval can
> + *    range from several seconds to even an hour).
>   *
> - *	We also set a timeout for the timer, in case something goes wrong.
> - *	The timeout should be longer then the maximum execution time of a
> - *	tape operation.
> - */
> - 
> -/*
> - *	DSC timings.
> + * Again, we postpone our request in the middle to free the bus for the other
> + * device. The polling frequency here should be lower than the read/write
> + * frequency since those media access commands are slow. We start from a "fast"
> + * frequency - IDETAPE_DSC_MA_FAST (one second), and if we don't receive DSC
> + * after IDETAPE_DSC_MA_THRESHOLD (5 minutes), we switch it to a lower frequency
> + * - IDETAPE_DSC_MA_SLOW (1 minute). We also set a timeout for the timer, in

the above paragraph is true only for point 2.

[...]

> @@ -703,8 +654,8 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
>  	}
>  
>  	/*
> -	 * If error was the result of a zero-length read or write command,
> -	 * with sense key=5, asc=0x22, ascq=0, let it slide.  Some drives
> +	 * If error was the result of a zero-length read or write command, with
> +	 * sense key=5, asc=0x22, ascq=0, let it slide.  Some drives
>  	 * (i.e. Seagate STT3401A Travan) don't support 0-length read/writes.
>  	 */
>  	if ((pc->c[0] == READ_6 || pc->c[0] == WRITE_6)

[...]

> @@ -1070,25 +1012,24 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
>  	if (pc->flags & PC_FL_DMA_IN_PROGRESS) {
>  		if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) {
>  			/*
> -			 * A DMA error is sometimes expected. For example,
> -			 * if the tape is crossing a filemark during a
> -			 * READ command, it will issue an irq and position
> -			 * itself before the filemark, so that only a partial
> -			 * data transfer will occur (which causes the DMA
> -			 * error). In that case, we will later ask the tape
> -			 * how much bytes of the original request were
> -			 * actually transferred (we can't receive that
> -			 * information from the DMA engine on most chipsets).
> +			 * A DMA error is sometimes expected. For example, if
> +			 * the tape is crossing a filemark during a READ
> +			 * command, it will issue an irq and position itself
> +			 * before the filemark, so that only a partial data
> +			 * transfer will occur (which causes the DMA error). In
> +			 * that case, we will later ask the tape how much bytes
> +			 * of the original request were actually transferred (we
> +			 * can't receive that information from the DMA engine on
> +			 * most chipsets).
>  			 */
>  
>  			/*
> -			 * On the contrary, a DMA error is never expected;
> -			 * it usually indicates a hardware error or abort.
> -			 * If the tape crosses a filemark during a READ
> -			 * command, it will issue an irq and position itself
> -			 * after the filemark (not before). Only a partial
> -			 * data transfer will occur, but no DMA error.
> -			 * (AS, 19 Apr 2001)
> +			 * On the contrary, a DMA error is never expected; it
> +			 * usually indicates a hardware error or abort. If the
> +			 * tape crosses a filemark during a READ command, it
> +			 * will issue an irq and position itself after the
> +			 * filemark (not before). Only a partial data transfer
> +			 * will occur, but no DMA error. (AS, 19 Apr 2001)
>  			 */
>  			pc->flags |= PC_FL_DMA_ERROR;
>  		} else {

I dropped the above chunks (they don't seem to add any value)

[...]

> + * 3. ATAPI Tape media access commands have immediate status with a delayed
> + * process. In case of a successful initiation of a media access packet command,
> + * the DSC bit will be set when the actual execution of the command is finished.
> + * Since the tape drive will not issue an interrupt, we have to poll for this
> + * event. In this case, we define the request as "low priority request" by
> + * setting rq_status to	IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and
> + * exit	the driver.

replaced tabs with spaces

[...]

> -	 * For SCSI this byte is defined as subpage instead of high byte
> -	 * of length and some IDE drives seem to interpret it this way
> -	 * and return an error when 255 is used.
> +	 * For SCSI this byte is defined as subpage instead of high byte of
> +	 * length and some IDE drives seem to interpret it this way and return
> +	 * an error when 255 is used.

this change was also dropped

[...]

> -	 * If the tape is still busy, postpone our request and service
> -	 * the other device meanwhile.
> +	 * If the tape is still busy, postpone our request and service the other
> +	 * device meanwhile.

same here

[...]

>  /*
> - *	ide_setup is called to:
> + * The function below is called to:
>   *
> - *		1.	Initialize our various state variables.
> - *		2.	Ask the tape for its capabilities.
> - *		3.	Allocate a buffer which will be used for data
> - *			transfer. The buffer size is chosen based on
> - *			the recommendation which we received in step (2).
> - *
> - *	Note that at this point ide.c already assigned us an irq, so that
> - *	we can queue requests here and wait for their completion.
> + * 1. Initialize our various state variables.
> + * 2. Ask the tape for its capabilities.
> + * 3. Allocate a buffer which will be used for data transfer. The buffer size is
> + * chosen based on the recommendation which we received in step 2. Note that at

"Note" is for the whole comment not only step 3.

> + * this point ide.c already assigned us an irq, so that we can queue requests
> + * here and wait for their completion.
>   */

[PATCH 15/22] ide-tape: remove unused "length" arg from idetape_create_read_buffer_cmd()

[Borislav Petkov]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index a80f8d9..342ec50 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1468,7 +1468,8 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsi
 		pc->flags |= PC_FL_DMA_RECOMMENDED;
 }
 
-static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
+static void idetape_create_read_buffer_cmd(idetape_tape_t *tape,
+		idetape_pc_t *pc, struct idetape_bh *bh)
 {
 	int size = 32768;
 	struct idetape_bh *p = bh;
@@ -1486,7 +1487,8 @@ static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *p
 		atomic_set(&p->b_count, 0);
 		p = p->b_reqnext;
 	}
-	pc->request_transfer = pc->buffer_size = size;
+	pc->request_transfer = size;
+	pc->buffer_size = size;
 }
 
 static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
@@ -1607,7 +1609,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 		if (!pc)
 			goto err;
 
-		idetape_create_read_buffer_cmd(tape, pc, rq->current_nr_sectors,
+		idetape_create_read_buffer_cmd(tape, pc,
 				(struct idetape_bh *)rq->special);
 		goto out;
 	}
-- 
1.5.3.7

[PATCH 16/22] ide-tape: include proper headers

[Borislav Petkov]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 342ec50..24f048f 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -39,9 +39,9 @@
 #include <scsi/scsi.h>
 
 #include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 #include <asm/unaligned.h>
 #include <linux/mtio.h>
 
-- 
1.5.3.7

[PATCH 17/22] ide-tape: collect module-related macro calls at the end

[Borislav Petkov]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 24f048f..cfcf5b0 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -3681,9 +3681,6 @@ failed:
 	return -ENODEV;
 }
 
-MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver");
-MODULE_LICENSE("GPL");
-
 static void __exit idetape_exit (void)
 {
 	driver_unregister(&idetape_driver.gen_driver);
@@ -3726,3 +3723,5 @@ MODULE_ALIAS("ide:*m-tape*");
 module_init(idetape_init);
 module_exit(idetape_exit);
 MODULE_ALIAS_CHARDEV_MAJOR(IDETAPE_MAJOR);
+MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver");
+MODULE_LICENSE("GPL");
-- 
1.5.3.7

[PATCH 18/22] ide-tape: remove leftover OnStream support warning

[Borislav Petkov]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |    4 ----
 1 files changed, 0 insertions(+), 4 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index cfcf5b0..4a12c0b 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -3629,10 +3629,6 @@ static int ide_tape_probe(ide_drive_t *drive)
 		printk("ide-tape: passing drive %s to ide-scsi emulation.\n", drive->name);
 		goto failed;
 	}
-	if (strstr(drive->id->model, "OnStream DI-")) {
-		printk(KERN_WARNING "ide-tape: Use drive %s with ide-scsi emulation and osst.\n", drive->name);
-		printk(KERN_WARNING "ide-tape: OnStream support will be removed soon from ide-tape!\n");
-	}
 	tape = kzalloc(sizeof (idetape_tape_t), GFP_KERNEL);
 	if (tape == NULL) {
 		printk(KERN_ERR "ide-tape: %s: Can't allocate a tape structure\n", drive->name);
-- 
1.5.3.7

[PATCH 19/22] ide-tape: fix syntax error in idetape_identify_device()

[Borislav Petkov]

Spotted by Sergei Shtylyov.

CC: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 4a12c0b..7e998c4 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -3273,8 +3273,8 @@ static int idetape_identify_device(ide_drive_t *drive)
 	else if (!removable)
 		printk(KERN_ERR "ide-tape: The removable flag is not set\n");
 	else if (packet_size != 0) {
-		printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12 "
-				"bytes long\n", packet_size);
+		printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12"
+				" bytes\n", packet_size);
 	} else
 		return 1;
 	return 0;
-- 
1.5.3.7

[PATCH 20/22] ide-tape: cleanup the remaining codestyle issues

[Borislav Petkov]

... thus decreasing checkpatch.pl errors to 0.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |  801 ++++++++++++++++++++++++++++--------------------
 1 files changed, 468 insertions(+), 333 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 7e998c4..5c88885 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -486,7 +486,7 @@ enum {
  * The variables below are used for the character device interface. Additional
  * state variables are defined in our ide_drive_t structure.
  */
-static struct ide_tape_obj * idetape_devs[MAX_HWIFS * MAX_DRIVES];
+static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
 
 #define ide_tape_f(file) ((file)->private_data)
 
@@ -502,20 +502,21 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
 	return tape;
 }
 
-static int idetape_chrdev_release (struct inode *inode, struct file *filp);
-static void idetape_write_release (ide_drive_t *drive, unsigned int minor);
+static int idetape_chrdev_release(struct inode *inode, struct file *filp);
+static void idetape_write_release(ide_drive_t *drive, unsigned int minor);
 
 /*
  * Too bad. The drive wants to send us data which we are not ready to accept.
  * Just throw it away.
  */
-static void idetape_discard_data (ide_drive_t *drive, unsigned int bcount)
+static void idetape_discard_data(ide_drive_t *drive, unsigned int bcount)
 {
 	while (bcount--)
 		(void) HWIF(drive)->INB(IDE_DATA_REG);
 }
 
-static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigned int bcount)
+static void idetape_input_buffers(ide_drive_t *drive, idetape_pc_t *pc,
+		unsigned int bcount)
 {
 	struct idetape_bh *bh = pc->bh;
 	int count;
@@ -527,8 +528,11 @@ static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigne
 			idetape_discard_data(drive, bcount);
 			return;
 		}
-		count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount);
-		HWIF(drive)->atapi_input_bytes(drive, bh->b_data + atomic_read(&bh->b_count), count);
+		count = min(
+			(unsigned int)(bh->b_size - atomic_read(&bh->b_count)),
+			bcount);
+		HWIF(drive)->atapi_input_bytes(drive, bh->b_data +
+					atomic_read(&bh->b_count), count);
 		bcount -= count;
 		atomic_add(count, &bh->b_count);
 		if (atomic_read(&bh->b_count) == bh->b_size) {
@@ -540,15 +544,16 @@ static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigne
 	pc->bh = bh;
 }
 
-static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigned int bcount)
+static void idetape_output_buffers(ide_drive_t *drive, idetape_pc_t *pc,
+		unsigned int bcount)
 {
 	struct idetape_bh *bh = pc->bh;
 	int count;
 
 	while (bcount) {
 		if (bh == NULL) {
-			printk(KERN_ERR "ide-tape: bh == NULL in "
-				"idetape_output_buffers\n");
+			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+					__func__);
 			return;
 		}
 		count = min((unsigned int)pc->b_count, (unsigned int)bcount);
@@ -557,7 +562,8 @@ static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsign
 		pc->b_data += count;
 		pc->b_count -= count;
 		if (!pc->b_count) {
-			pc->bh = bh = bh->b_reqnext;
+			pc->bh	= bh->b_reqnext;
+			bh	= bh->b_reqnext;
 			if (bh) {
 				pc->b_data = bh->b_data;
 				pc->b_count = atomic_read(&bh->b_count);
@@ -566,7 +572,7 @@ static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsign
 	}
 }
 
-static void idetape_update_buffers (idetape_pc_t *pc)
+static void idetape_update_buffers(idetape_pc_t *pc)
 {
 	struct idetape_bh *bh = pc->bh;
 	int count;
@@ -576,8 +582,8 @@ static void idetape_update_buffers (idetape_pc_t *pc)
 		return;
 	while (bcount) {
 		if (bh == NULL) {
-			printk(KERN_ERR "ide-tape: bh == NULL in "
-				"idetape_update_buffers\n");
+			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+					__func__);
 			return;
 		}
 		count = min((unsigned int)bh->b_size, (unsigned int)bcount);
@@ -617,7 +623,7 @@ static struct request *ide_tape_alloc_rq(void)
 	return rq;
 }
 
-static void idetape_init_pc (idetape_pc_t *pc)
+static void idetape_init_pc(idetape_pc_t *pc)
 {
 	memset(pc->c, 0, 12);
 	pc->retries = 0;
@@ -712,7 +718,7 @@ static void idetape_activate_next_stage(ide_drive_t *drive)
 }
 
 /* Free a stage along with its related buffers completely. */
-static void __idetape_kfree_stage (idetape_stage_t *stage)
+static void __idetape_kfree_stage(idetape_stage_t *stage)
 {
 	struct idetape_bh *prev_bh, *bh = stage->bh;
 	int size;
@@ -733,7 +739,7 @@ static void __idetape_kfree_stage (idetape_stage_t *stage)
 	kfree(stage);
 }
 
-static void idetape_kfree_stage (idetape_tape_t *tape, idetape_stage_t *stage)
+static void idetape_kfree_stage(idetape_tape_t *tape, idetape_stage_t *stage)
 {
 	__idetape_kfree_stage(stage);
 }
@@ -742,7 +748,7 @@ static void idetape_kfree_stage (idetape_tape_t *tape, idetape_stage_t *stage)
  * Remove tape->first_stage from the pipeline. The caller should avoid race
  * conditions.
  */
-static void idetape_remove_stage_head (ide_drive_t *drive)
+static void idetape_remove_stage_head(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_stage_t *stage;
@@ -765,9 +771,11 @@ static void idetape_remove_stage_head (ide_drive_t *drive)
 	if (tape->first_stage == NULL) {
 		tape->last_stage = NULL;
 		if (tape->next_stage != NULL)
-			printk(KERN_ERR "ide-tape: bug: tape->next_stage != NULL\n");
+			printk(KERN_ERR "ide-tape: bug: tape->next_stage !="
+					" NULL\n");
 		if (tape->nr_stages)
-			printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 now\n");
+			printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 "
+					"now\n");
 	}
 }
 
@@ -813,9 +821,9 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	switch (uptodate) {
-		case 0:	error = IDETAPE_ERROR_GENERAL; break;
-		case 1: error = 0; break;
-		default: error = uptodate;
+	case 0:	error = IDETAPE_ERROR_GENERAL; break;
+	case 1: error = 0; break;
+	default: error = uptodate;
 	}
 	rq->errors = error;
 	if (error)
@@ -839,7 +847,8 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 			if (error) {
 				tape->flags |= IDETAPE_FL_PIPELINE_ERR;
 				if (error == IDETAPE_ERROR_EOD)
-					idetape_abort_pipeline(drive, active_stage);
+					idetape_abort_pipeline(drive,
+								active_stage);
 			}
 		} else if (rq->cmd[0] & REQ_IDETAPE_READ) {
 			if (error == IDETAPE_ERROR_EOD) {
@@ -884,7 +893,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 	return 0;
 }
 
-static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive)
+static ide_startstop_t idetape_request_sense_callback(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
@@ -894,15 +903,16 @@ static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive)
 		idetape_analyze_error(drive, tape->pc->buffer);
 		idetape_end_request(drive, 1, 0);
 	} else {
-		printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - Aborting request!\n");
+		printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - "
+				"Aborting request!\n");
 		idetape_end_request(drive, 0, 0);
 	}
 	return ide_stopped;
 }
 
-static void idetape_create_request_sense_cmd (idetape_pc_t *pc)
+static void idetape_create_request_sense_cmd(idetape_pc_t *pc)
 {
-	idetape_init_pc(pc);	
+	idetape_init_pc(pc);
 	pc->c[0] = REQUEST_SENSE;
 	pc->c[4] = 20;
 	pc->request_transfer = 20;
@@ -928,7 +938,8 @@ static void idetape_init_rq(struct request *rq, u8 cmd)
  * handling functions should queue request to the lower level part and wait for
  * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail.
  */
-static void idetape_queue_pc_head (ide_drive_t *drive, idetape_pc_t *pc,struct request *rq)
+static void idetape_queue_pc_head(ide_drive_t *drive, idetape_pc_t *pc,
+		struct request *rq)
 {
 	struct ide_tape_obj *tape = drive->driver_data;
 
@@ -970,7 +981,7 @@ static ide_startstop_t idetape_retry_pc(ide_drive_t *drive)
  * Postpone the current request so that ide.c will be able to service requests
  * from another device on the same hwgroup while we are polling for DSC.
  */
-static void idetape_postpone_request (ide_drive_t *drive)
+static void idetape_postpone_request(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
@@ -999,7 +1010,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 	idetape_io_buf *iobuf;
 	unsigned int temp;
 #if SIMULATE_ERRORS
-	static int error_sim_count = 0;
+	static int error_sim_count;
 #endif
 	u16 bcount;
 	u8 stat, ireason;
@@ -1200,8 +1211,9 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
 	ide_startstop_t startstop;
 	u8 ireason;
 
-	if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) {
-		printk(KERN_ERR "ide-tape: Strange, packet command initiated yet DRQ isn't asserted\n");
+	if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+		printk(KERN_ERR "ide-tape: Strange, packet command initiated "
+				"yet DRQ isn't asserted\n");
 		return startstop;
 	}
 	ireason = hwif->INB(IDE_IREASON_REG);
@@ -1308,7 +1320,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
 	}
 }
 
-static ide_startstop_t idetape_pc_callback (ide_drive_t *drive)
+static ide_startstop_t idetape_pc_callback(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
@@ -1319,7 +1331,7 @@ static ide_startstop_t idetape_pc_callback (ide_drive_t *drive)
 }
 
 /* A mode sense command is used to "sense" tape parameters. */
-static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code)
+static void idetape_create_mode_sense_cmd(idetape_pc_t *pc, u8 page_code)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = MODE_SENSE;
@@ -1350,39 +1362,56 @@ static void idetape_calculate_speeds(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
-	if (time_after(jiffies, tape->controlled_pipeline_head_time + 120 * HZ)) {
-		tape->controlled_previous_pipeline_head = tape->controlled_last_pipeline_head;
-		tape->controlled_previous_head_time = tape->controlled_pipeline_head_time;
+	if (time_after(jiffies,
+			tape->controlled_pipeline_head_time + 120 * HZ)) {
+		tape->controlled_previous_pipeline_head =
+			tape->controlled_last_pipeline_head;
+		tape->controlled_previous_head_time =
+			tape->controlled_pipeline_head_time;
 		tape->controlled_last_pipeline_head = tape->pipeline_head;
 		tape->controlled_pipeline_head_time = jiffies;
 	}
 	if (time_after(jiffies, tape->controlled_pipeline_head_time + 60 * HZ))
-		tape->controlled_pipeline_head_speed = (tape->pipeline_head - tape->controlled_last_pipeline_head) * 32 * HZ / (jiffies - tape->controlled_pipeline_head_time);
+		tape->controlled_pipeline_head_speed = (tape->pipeline_head -
+				tape->controlled_last_pipeline_head) * 32 * HZ /
+				(jiffies - tape->controlled_pipeline_head_time);
 	else if (time_after(jiffies, tape->controlled_previous_head_time))
-		tape->controlled_pipeline_head_speed = (tape->pipeline_head - tape->controlled_previous_pipeline_head) * 32 * HZ / (jiffies - tape->controlled_previous_head_time);
+		tape->controlled_pipeline_head_speed = (tape->pipeline_head -
+				tape->controlled_previous_pipeline_head) * 32 *
+			HZ / (jiffies - tape->controlled_previous_head_time);
 
-	if (tape->nr_pending_stages < tape->max_stages /*- 1 */) {
+	if (tape->nr_pending_stages < tape->max_stages/*- 1 */) {
 		/* -1 for read mode error recovery */
-		if (time_after(jiffies, tape->uncontrolled_previous_head_time + 10 * HZ)) {
+		if (time_after(jiffies, tape->uncontrolled_previous_head_time +
+					10 * HZ)) {
 			tape->uncontrolled_pipeline_head_time = jiffies;
-			tape->uncontrolled_pipeline_head_speed = (tape->pipeline_head - tape->uncontrolled_previous_pipeline_head) * 32 * HZ / (jiffies - tape->uncontrolled_previous_head_time);
+			tape->uncontrolled_pipeline_head_speed =
+				(tape->pipeline_head -
+				 tape->uncontrolled_previous_pipeline_head) *
+				32 * HZ / (jiffies -
+					tape->uncontrolled_previous_head_time);
 		}
 	} else {
 		tape->uncontrolled_previous_head_time = jiffies;
 		tape->uncontrolled_previous_pipeline_head = tape->pipeline_head;
-		if (time_after(jiffies, tape->uncontrolled_pipeline_head_time + 30 * HZ)) {
+		if (time_after(jiffies, tape->uncontrolled_pipeline_head_time +
+					30 * HZ))
 			tape->uncontrolled_pipeline_head_time = jiffies;
-		}
+
 	}
-	tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed, tape->controlled_pipeline_head_speed);
+	tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed,
+					tape->controlled_pipeline_head_speed);
 
 	if (tape->speed_control == 1) {
 		if (tape->nr_pending_stages >= tape->max_stages / 2)
 			tape->max_insert_speed = tape->pipeline_head_speed +
-				(1100 - tape->pipeline_head_speed) * 2 * (tape->nr_pending_stages - tape->max_stages / 2) / tape->max_stages;
+				(1100 - tape->pipeline_head_speed) * 2 *
+				(tape->nr_pending_stages - tape->max_stages / 2)
+				/ tape->max_stages;
 		else
 			tape->max_insert_speed = 500 +
-				(tape->pipeline_head_speed - 500) * 2 * tape->nr_pending_stages / tape->max_stages;
+				(tape->pipeline_head_speed - 500) * 2 *
+				tape->nr_pending_stages / tape->max_stages;
 
 		if (tape->nr_pending_stages >= tape->max_stages * 99 / 100)
 			tape->max_insert_speed = 5000;
@@ -1392,7 +1421,7 @@ static void idetape_calculate_speeds(ide_drive_t *drive)
 	tape->max_insert_speed = max(tape->max_insert_speed, 500);
 }
 
-static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive)
+static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_pc_t *pc = tape->pc;
@@ -1418,7 +1447,7 @@ static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive)
 	return pc->callback(drive);
 }
 
-static ide_startstop_t idetape_rw_callback (ide_drive_t *drive)
+static ide_startstop_t idetape_rw_callback(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct request *rq = HWGROUP(drive)->rq;
@@ -1434,9 +1463,11 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive)
 		tape->insert_size = 0;
 	}
 	if (time_after(jiffies, tape->insert_time))
-		tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
+		tape->insert_speed = tape->insert_size / 1024 * HZ /
+					(jiffies - tape->insert_time);
 	if (time_after_eq(jiffies, tape->avg_time + HZ)) {
-		tape->avg_speed = tape->avg_size * HZ / (jiffies - tape->avg_time) / 1024;
+		tape->avg_speed = tape->avg_size * HZ /
+				(jiffies - tape->avg_time) / 1024;
 		tape->avg_size = 0;
 		tape->avg_time = jiffies;
 	}
@@ -1452,7 +1483,8 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive)
 	return ide_stopped;
 }
 
-static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
+static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
+		unsigned int length, struct idetape_bh *bh)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = READ_6;
@@ -1491,7 +1523,8 @@ static void idetape_create_read_buffer_cmd(idetape_tape_t *tape,
 	pc->buffer_size = size;
 }
 
-static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
+static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
+		unsigned int length, struct idetape_bh *bh)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = WRITE_6;
@@ -1531,9 +1564,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 
 	/* Retry a failed packet command */
 	if (tape->failed_pc != NULL &&
-	    tape->pc->c[0] == REQUEST_SENSE) {
+	    tape->pc->c[0] == REQUEST_SENSE)
 		return idetape_issue_pc(drive, tape->failed_pc);
-	}
+
 	if (postponed_rq != NULL)
 		if (rq != postponed_rq) {
 			printk(KERN_ERR "ide-tape: ide-tape.c bug - "
@@ -1559,7 +1592,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	}
 
 	if (time_after(jiffies, tape->insert_time))
-		tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
+		tape->insert_speed = tape->insert_size / 1024 * HZ /
+					(jiffies - tape->insert_time);
 	idetape_calculate_speeds(drive);
 	if ((tape->flags & IDETAPE_FL_IGNORE_DSC) && (stat & SEEK_STAT) == 0) {
 		tape->flags &= ~IDETAPE_FL_IGNORE_DSC;
@@ -1576,7 +1610,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 			} else {
 				return ide_do_reset(drive);
 			}
-		} else if (time_after(jiffies, tape->dsc_polling_start + IDETAPE_DSC_MA_THRESHOLD))
+		} else if (time_after(jiffies,
+					tape->dsc_polling_start +
+					IDETAPE_DSC_MA_THRESHOLD))
 			tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW;
 		idetape_postpone_request(drive);
 		return ide_stopped;
@@ -1634,7 +1670,7 @@ err:
 }
 
 /* Pipeline related functions */
-static inline int idetape_pipeline_active (idetape_tape_t *tape)
+static inline int idetape_pipeline_active(idetape_tape_t *tape)
 {
 	int rc1, rc2;
 
@@ -1655,22 +1691,26 @@ static inline int idetape_pipeline_active (idetape_tape_t *tape)
  * Pipeline stages are optional and are used to increase performance. If we
  * can't allocate them, we'll manage without them.
  */
-static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full, int clear)
+static idetape_stage_t *__idetape_kmalloc_stage(idetape_tape_t *tape, int full,
+		int clear)
 {
 	idetape_stage_t *stage;
 	struct idetape_bh *prev_bh, *bh;
 	int pages = tape->pages_per_stage;
 	char *b_data = NULL;
 
-	if ((stage = kmalloc(sizeof (idetape_stage_t),GFP_KERNEL)) == NULL)
+	stage = kmalloc(sizeof(idetape_stage_t), GFP_KERNEL);
+	if (!stage)
 		return NULL;
 	stage->next = NULL;
 
-	bh = stage->bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
+	stage->bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
+	bh = stage->bh;
 	if (bh == NULL)
 		goto abort;
 	bh->b_reqnext = NULL;
-	if ((bh->b_data = (char *) __get_free_page (GFP_KERNEL)) == NULL)
+	bh->b_data = (char *) __get_free_page(GFP_KERNEL);
+	if (!bh->b_data)
 		goto abort;
 	if (clear)
 		memset(bh->b_data, 0, PAGE_SIZE);
@@ -1678,7 +1718,8 @@ static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full,
 	atomic_set(&bh->b_count, full ? bh->b_size : 0);
 
 	while (--pages) {
-		if ((b_data = (char *) __get_free_page (GFP_KERNEL)) == NULL)
+		b_data = (char *) __get_free_page(GFP_KERNEL);
+		if (!b_data)
 			goto abort;
 		if (clear)
 			memset(b_data, 0, PAGE_SIZE);
@@ -1696,7 +1737,8 @@ static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full,
 			continue;
 		}
 		prev_bh = bh;
-		if ((bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL)) == NULL) {
+		bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
+		if (!bh) {
 			free_page((unsigned long) b_data);
 			goto abort;
 		}
@@ -1715,7 +1757,7 @@ abort:
 	return NULL;
 }
 
-static idetape_stage_t *idetape_kmalloc_stage (idetape_tape_t *tape)
+static idetape_stage_t *idetape_kmalloc_stage(idetape_tape_t *tape)
 {
 	idetape_stage_t *cache_stage = tape->cache_stage;
 
@@ -1730,7 +1772,8 @@ static idetape_stage_t *idetape_kmalloc_stage (idetape_tape_t *tape)
 	return __idetape_kmalloc_stage(tape, 0, 0);
 }
 
-static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t *stage, const char __user *buf, int n)
+static int idetape_copy_stage_from_user(idetape_tape_t *tape,
+		idetape_stage_t *stage, const char __user *buf, int n)
 {
 	struct idetape_bh *bh = tape->bh;
 	int count;
@@ -1738,12 +1781,15 @@ static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t *
 
 	while (n) {
 		if (bh == NULL) {
-			printk(KERN_ERR "ide-tape: bh == NULL in "
-				"idetape_copy_stage_from_user\n");
+			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+					__func__);
 			return 1;
 		}
-		count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), (unsigned int)n);
-		if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, count))
+		count = min((unsigned int)
+				(bh->b_size - atomic_read(&bh->b_count)),
+				(unsigned int)n);
+		if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf,
+				count))
 			ret = 1;
 		n -= count;
 		atomic_add(count, &bh->b_count);
@@ -1758,7 +1804,8 @@ static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t *
 	return ret;
 }
 
-static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, idetape_stage_t *stage, int n)
+static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf,
+		idetape_stage_t *stage, int n)
 {
 	struct idetape_bh *bh = tape->bh;
 	int count;
@@ -1766,8 +1813,8 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i
 
 	while (n) {
 		if (bh == NULL) {
-			printk(KERN_ERR "ide-tape: bh == NULL in "
-				"idetape_copy_stage_to_user\n");
+			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+					__func__);
 			return 1;
 		}
 		count = min(tape->b_count, n);
@@ -1778,7 +1825,8 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i
 		tape->b_count -= count;
 		buf += count;
 		if (!tape->b_count) {
-			tape->bh = bh = bh->b_reqnext;
+			tape->bh = bh->b_reqnext;
+			bh = bh->b_reqnext;
 			if (bh) {
 				tape->b_data = bh->b_data;
 				tape->b_count = atomic_read(&bh->b_count);
@@ -1788,10 +1836,10 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i
 	return ret;
 }
 
-static void idetape_init_merge_stage (idetape_tape_t *tape)
+static void idetape_init_merge_stage(idetape_tape_t *tape)
 {
 	struct idetape_bh *bh = tape->merge_stage->bh;
-	
+
 	tape->bh = bh;
 	if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
 		atomic_set(&bh->b_count, 0);
@@ -1801,7 +1849,7 @@ static void idetape_init_merge_stage (idetape_tape_t *tape)
 	}
 }
 
-static void idetape_switch_buffers (idetape_tape_t *tape, idetape_stage_t *stage)
+static void idetape_switch_buffers(idetape_tape_t *tape, idetape_stage_t *stage)
 {
 	struct idetape_bh *tmp;
 
@@ -1812,7 +1860,7 @@ static void idetape_switch_buffers (idetape_tape_t *tape, idetape_stage_t *stage
 }
 
 /* Add a new stage at the end of the pipeline. */
-static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage)
+static void idetape_add_stage_tail(ide_drive_t *drive, idetape_stage_t *stage)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	unsigned long flags;
@@ -1822,9 +1870,10 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage)
 	spin_lock_irqsave(&tape->lock, flags);
 	stage->next = NULL;
 	if (tape->last_stage != NULL)
-		tape->last_stage->next=stage;
+		tape->last_stage->next = stage;
 	else
-		tape->first_stage = tape->next_stage=stage;
+		tape->first_stage = stage;
+		tape->next_stage  = stage;
 	tape->last_stage = stage;
 	if (tape->next_stage == NULL)
 		tape->next_stage = tape->last_stage;
@@ -1837,13 +1886,14 @@ static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage)
  * caller should ensure that the request will not be serviced before we install
  * the completion (usually by disabling interrupts).
  */
-static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq)
+static void idetape_wait_for_request(ide_drive_t *drive, struct request *rq)
 {
 	DECLARE_COMPLETION_ONSTACK(wait);
 	idetape_tape_t *tape = drive->driver_data;
 
 	if (rq == NULL || !blk_special_request(rq)) {
-		printk (KERN_ERR "ide-tape: bug: Trying to sleep on non-valid request\n");
+		printk(KERN_ERR "ide-tape: bug: Trying to sleep on non-valid"
+				 " request\n");
 		return;
 	}
 	rq->end_io_data = &wait;
@@ -1893,7 +1943,8 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
  * Write a filemark if write_filemark=1. Flush the device buffers without
  * writing a filemark otherwise.
  */
-static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t *pc,int write_filemark)
+static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
+		idetape_pc_t *pc, int write_filemark)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = WRITE_FILEMARKS;
@@ -1922,7 +1973,7 @@ static void idetape_create_test_unit_ready_cmd(idetape_pc_t *pc)
  * request list without waiting for it to be serviced! In that case, we usually
  * use idetape_queue_pc_head().
  */
-static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc)
+static int __idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc)
 {
 	struct ide_tape_obj *tape = drive->driver_data;
 	struct request rq;
@@ -1933,7 +1984,8 @@ static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc)
 	return ide_do_drive_cmd(drive, &rq, ide_wait);
 }
 
-static void idetape_create_load_unload_cmd (ide_drive_t *drive, idetape_pc_t *pc,int cmd)
+static void idetape_create_load_unload_cmd(ide_drive_t *drive, idetape_pc_t *pc,
+		int cmd)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = START_STOP;
@@ -1960,7 +2012,8 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
 			/* no media */
 			if (load_attempted)
 				return -ENOMEDIUM;
-			idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK);
+			idetape_create_load_unload_cmd(drive, &pc,
+							IDETAPE_LU_LOAD_MASK);
 			__idetape_queue_pc_tail(drive, &pc);
 			load_attempted = 1;
 		/* not about to be ready */
@@ -1972,24 +2025,25 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
 	return -EIO;
 }
 
-static int idetape_queue_pc_tail (ide_drive_t *drive,idetape_pc_t *pc)
+static int idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc)
 {
 	return __idetape_queue_pc_tail(drive, pc);
 }
 
-static int idetape_flush_tape_buffers (ide_drive_t *drive)
+static int idetape_flush_tape_buffers(ide_drive_t *drive)
 {
 	idetape_pc_t pc;
 	int rc;
 
 	idetape_create_write_filemark_cmd(drive, &pc, 0);
-	if ((rc = idetape_queue_pc_tail(drive, &pc)))
+	rc = idetape_queue_pc_tail(drive, &pc);
+	if (rc)
 		return rc;
 	idetape_wait_ready(drive, 60 * 5 * HZ);
 	return 0;
 }
 
-static void idetape_create_read_position_cmd (idetape_pc_t *pc)
+static void idetape_create_read_position_cmd(idetape_pc_t *pc)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = READ_POSITION;
@@ -1997,7 +2051,7 @@ static void idetape_create_read_position_cmd (idetape_pc_t *pc)
 	pc->callback = &idetape_read_position_callback;
 }
 
-static int idetape_read_position (ide_drive_t *drive)
+static int idetape_read_position(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_pc_t pc;
@@ -2012,7 +2066,8 @@ static int idetape_read_position (ide_drive_t *drive)
 	return position;
 }
 
-static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, unsigned int block, u8 partition, int skip)
+static void idetape_create_locate_cmd(ide_drive_t *drive, idetape_pc_t *pc,
+		unsigned int block, u8 partition, int skip)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = POSITION_TO_ELEMENT;
@@ -2023,7 +2078,8 @@ static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, uns
 	pc->callback = &idetape_pc_callback;
 }
 
-static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int prevent)
+static int idetape_create_prevent_cmd(ide_drive_t *drive, idetape_pc_t *pc,
+		int prevent)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
@@ -2038,7 +2094,7 @@ static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int
 	return 1;
 }
 
-static int __idetape_discard_read_pipeline (ide_drive_t *drive)
+static int __idetape_discard_read_pipeline(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	unsigned long flags;
@@ -2077,7 +2133,7 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
 	while (tape->first_stage != NULL) {
 		struct request *rq_ptr = &tape->first_stage->rq;
 
-		cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors; 
+		cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors;
 		if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK)
 			++cnt;
 		idetape_remove_stage_head(drive);
@@ -2093,7 +2149,8 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive)
  * all higher level operations, we queue the commands at the tail of the request
  * queue and wait for their completion.
  */
-static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 partition, int skip)
+static int idetape_position_tape(ide_drive_t *drive, unsigned int block,
+		u8 partition, int skip)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	int retval;
@@ -2111,7 +2168,8 @@ static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 par
 	return (idetape_queue_pc_tail(drive, &pc));
 }
 
-static void idetape_discard_read_pipeline (ide_drive_t *drive, int restore_position)
+static void idetape_discard_read_pipeline(ide_drive_t *drive,
+				int restore_position)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	int cnt;
@@ -2122,7 +2180,8 @@ static void idetape_discard_read_pipeline (ide_drive_t *drive, int restore_posit
 		position = idetape_read_position(drive);
 		seek = position > cnt ? position - cnt : 0;
 		if (idetape_position_tape(drive, seek, 0, 0)) {
-			printk(KERN_INFO "ide-tape: %s: position_tape failed in discard_pipeline()\n", tape->name);
+			printk(KERN_INFO "ide-tape: %s: position_tape failed in"
+					 " discard_pipeline()\n", tape->name);
 			return;
 		}
 	}
@@ -2132,7 +2191,8 @@ static void idetape_discard_read_pipeline (ide_drive_t *drive, int restore_posit
  * Generate a read/write request for the block device interface and wait for it
  * to be serviced.
  */
-static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh)
+static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
+		struct idetape_bh *bh)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct request rq;
@@ -2149,7 +2209,8 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct
 	rq.rq_disk = tape->disk;
 	rq.special = (void *)bh;
 	rq.sector = tape->first_frame;
-	rq.nr_sectors = rq.current_nr_sectors = blocks;
+	rq.nr_sectors		= blocks;
+	rq.current_nr_sectors	= blocks;
 	(void) ide_do_drive_cmd(drive, &rq, ide_wait);
 
 	if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0)
@@ -2176,15 +2237,16 @@ static void idetape_plug_pipeline(ide_drive_t *drive)
 	}
 }
 
-static void idetape_create_inquiry_cmd (idetape_pc_t *pc)
+static void idetape_create_inquiry_cmd(idetape_pc_t *pc)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = INQUIRY;
-	pc->c[4] = pc->request_transfer = 254;
+	pc->c[4] = 254;
+	pc->request_transfer = 254;
 	pc->callback = &idetape_pc_callback;
 }
 
-static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc)
+static void idetape_create_rewind_cmd(ide_drive_t *drive, idetape_pc_t *pc)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = REZERO_UNIT;
@@ -2192,7 +2254,7 @@ static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc)
 	pc->callback = &idetape_pc_callback;
 }
 
-static void idetape_create_erase_cmd (idetape_pc_t *pc)
+static void idetape_create_erase_cmd(idetape_pc_t *pc)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = ERASE;
@@ -2201,7 +2263,7 @@ static void idetape_create_erase_cmd (idetape_pc_t *pc)
 	pc->callback = &idetape_pc_callback;
 }
 
-static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd)
+static void idetape_create_space_cmd(idetape_pc_t *pc, int count, u8 cmd)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = SPACE;
@@ -2211,7 +2273,7 @@ static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd)
 	pc->callback = &idetape_pc_callback;
 }
 
-static void idetape_wait_first_stage (ide_drive_t *drive)
+static void idetape_wait_first_stage(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	unsigned long flags;
@@ -2235,7 +2297,7 @@ static void idetape_wait_first_stage (ide_drive_t *drive)
  * 3. If we still can't allocate a stage, fallback to non-pipelined operation
  * mode for this request.
  */
-static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
+static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_stage_t *new_stage;
@@ -2259,14 +2321,16 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
 			 * The machine is short on memory. Fallback to non-
 			 * pipelined operation mode for this request.
 			 */
-			return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh);
+			return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
+						blocks, tape->merge_stage->bh);
 		}
 	}
 	rq = &new_stage->rq;
 	idetape_init_rq(rq, REQ_IDETAPE_WRITE);
 	/* Doesn't actually matter - We always assume sequential access */
 	rq->sector = tape->first_frame;
-	rq->nr_sectors = rq->current_nr_sectors = blocks;
+	rq->current_nr_sectors = blocks;
+	rq->nr_sectors = blocks;
 
 	idetape_switch_buffers(tape, new_stage);
 	idetape_add_stage_tail(drive, new_stage);
@@ -2304,7 +2368,7 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
  * Wait until all pending pipeline requests are serviced. Typically called on
  * device close.
  */
-static void idetape_wait_for_pipeline (ide_drive_t *drive)
+static void idetape_wait_for_pipeline(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	unsigned long flags;
@@ -2318,14 +2382,15 @@ static void idetape_wait_for_pipeline (ide_drive_t *drive)
 	}
 }
 
-static void idetape_empty_write_pipeline (ide_drive_t *drive)
+static void idetape_empty_write_pipeline(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	int blocks, min;
 	struct idetape_bh *bh;
 
 	if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
-		printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline, but we are not writing.\n");
+		printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline,"
+				" but we are not writing.\n");
 		return;
 	}
 	if (tape->merge_stage_size > tape->stage_size) {
@@ -2348,12 +2413,14 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
 			bh = tape->bh;
 			while (i) {
 				if (bh == NULL) {
-
-					printk(KERN_INFO "ide-tape: bug, bh NULL\n");
+					printk(KERN_INFO "ide-tape: bug,"
+							 " bh NULL\n");
 					break;
 				}
-				min = min(i, (unsigned int)(bh->b_size - atomic_read(&bh->b_count)));
-				memset(bh->b_data + atomic_read(&bh->b_count), 0, min);
+				min = min(i, (unsigned int)(bh->b_size -
+						atomic_read(&bh->b_count)));
+				memset(bh->b_data + atomic_read(&bh->b_count),
+						0, min);
 				atomic_add(min, &bh->b_count);
 				i -= min;
 				bh = bh->b_reqnext;
@@ -2389,18 +2456,22 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive)
 	}
 }
 
-static void idetape_restart_speed_control (ide_drive_t *drive)
+static void idetape_restart_speed_control(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
 	tape->restart_speed_control_req = 0;
 	tape->pipeline_head = 0;
 	tape->controlled_last_pipeline_head = 0;
-	tape->controlled_previous_pipeline_head = tape->uncontrolled_previous_pipeline_head = 0;
-	tape->pipeline_head_speed = tape->controlled_pipeline_head_speed = 5000;
+	tape->controlled_previous_pipeline_head = 0;
+	tape->uncontrolled_previous_pipeline_head = 0;
+	tape->controlled_pipeline_head_speed = 5000;
+	tape->pipeline_head_speed = 5000;
 	tape->uncontrolled_pipeline_head_speed = 0;
-	tape->controlled_pipeline_head_time = tape->uncontrolled_pipeline_head_time = jiffies;
-	tape->controlled_previous_head_time = tape->uncontrolled_previous_head_time = jiffies;
+	tape->controlled_pipeline_head_time =
+		tape->uncontrolled_pipeline_head_time = jiffies;
+	tape->controlled_previous_head_time =
+		tape->uncontrolled_previous_head_time = jiffies;
 }
 
 static int idetape_init_read(ide_drive_t *drive, int max_stages)
@@ -2418,10 +2489,12 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
 			idetape_flush_tape_buffers(drive);
 		}
 		if (tape->merge_stage || tape->merge_stage_size) {
-			printk (KERN_ERR "ide-tape: merge_stage_size should be 0 now\n");
+			printk(KERN_ERR "ide-tape: merge_stage_size should be"
+					 " 0 now\n");
 			tape->merge_stage_size = 0;
 		}
-		if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
+		tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0);
+		if (!tape->merge_stage)
 			return -ENOMEM;
 		tape->chrdev_dir = IDETAPE_DIR_READ;
 
@@ -2432,7 +2505,9 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
 		 * drives (Seagate STT3401A) will return an error.
 		 */
 		if (drive->dsc_overlap) {
-			bytes_read = idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, 0, tape->merge_stage->bh);
+			bytes_read = idetape_queue_rw_tail(drive,
+							REQ_IDETAPE_READ, 0,
+							tape->merge_stage->bh);
 			if (bytes_read < 0) {
 				__idetape_kfree_stage(tape->merge_stage);
 				tape->merge_stage = NULL;
@@ -2445,7 +2520,8 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
 		idetape_restart_speed_control(drive);
 	idetape_init_rq(&rq, REQ_IDETAPE_READ);
 	rq.sector = tape->first_frame;
-	rq.nr_sectors = rq.current_nr_sectors = blocks;
+	rq.current_nr_sectors = blocks;
+	rq.nr_sectors = blocks;
 	if (!(tape->flags & IDETAPE_FL_PIPELINE_ERR) &&
 			tape->nr_stages < max_stages) {
 		new_stage = idetape_kmalloc_stage(tape);
@@ -2473,7 +2549,7 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
  * Called from idetape_chrdev_read() to service a character device read request
  * and add read-ahead requests to our pipeline.
  */
-static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
+static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	unsigned long flags;
@@ -2498,7 +2574,8 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 	rq_ptr = &tape->first_stage->rq;
 	bytes_read = tape->blk_size * (rq_ptr->nr_sectors -
 					rq_ptr->current_nr_sectors);
-	rq_ptr->nr_sectors = rq_ptr->current_nr_sectors = 0;
+	rq_ptr->nr_sectors = 0;
+	rq_ptr->current_nr_sectors = 0;
 
 
 	if (rq_ptr->errors == IDETAPE_ERROR_EOD)
@@ -2514,13 +2591,14 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
 		idetape_calculate_speeds(drive);
 	}
 	if (bytes_read > blocks * tape->blk_size) {
-		printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n");
+		printk(KERN_ERR "ide-tape: bug: trying to return more bytes"
+				" than requested\n");
 		bytes_read = blocks * tape->blk_size;
 	}
 	return (bytes_read);
 }
 
-static void idetape_pad_zeros (ide_drive_t *drive, int bcount)
+static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct idetape_bh *bh;
@@ -2534,16 +2612,18 @@ static void idetape_pad_zeros (ide_drive_t *drive, int bcount)
 		bcount -= count;
 		blocks = count / tape->blk_size;
 		while (count) {
-			atomic_set(&bh->b_count, min(count, (unsigned int)bh->b_size));
+			atomic_set(&bh->b_count,
+				min(count, (unsigned int)bh->b_size));
 			memset(bh->b_data, 0, atomic_read(&bh->b_count));
 			count -= atomic_read(&bh->b_count);
 			bh = bh->b_reqnext;
 		}
-		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh);
+		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks,
+					tape->merge_stage->bh);
 	}
 }
 
-static int idetape_pipeline_size (ide_drive_t *drive)
+static int idetape_pipeline_size(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_stage_t *stage;
@@ -2568,7 +2648,7 @@ static int idetape_pipeline_size (ide_drive_t *drive)
  * Rewinds the tape to the Beginning Of the current Partition (BOP). We
  * currently support only one partition.
  */
-static int idetape_rewind_tape (ide_drive_t *drive)
+static int idetape_rewind_tape(ide_drive_t *drive)
 {
 	int retval;
 	idetape_pc_t pc;
@@ -2590,7 +2670,8 @@ static int idetape_rewind_tape (ide_drive_t *drive)
 }
 
 /* mtio.h compatible commands should be issued to the chrdev interface. */
-static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned long arg)
+static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd,
+		unsigned long arg)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	void __user *argp = (void __user *)arg;
@@ -2604,20 +2685,20 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l
 	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	switch (cmd) {
-		case 0x0340:
-			if (copy_from_user(&config, argp, sizeof(config)))
-				return -EFAULT;
-			tape->best_dsc_rw_freq = config.dsc_rw_frequency;
-			tape->max_stages = config.nr_stages;
-			break;
-		case 0x0350:
-			config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
-			config.nr_stages = tape->max_stages; 
-			if (copy_to_user(argp, &config, sizeof(config)))
-				return -EFAULT;
-			break;
-		default:
-			return -EIO;
+	case 0x0340:
+		if (copy_from_user(&config, argp, sizeof(config)))
+			return -EFAULT;
+		tape->best_dsc_rw_freq = config.dsc_rw_frequency;
+		tape->max_stages = config.nr_stages;
+		break;
+	case 0x0350:
+		config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
+		config.nr_stages = tape->max_stages;
+		if (copy_to_user(argp, &config, sizeof(config)))
+			return -EFAULT;
+		break;
+	default:
+		return -EIO;
 	}
 	return 0;
 }
@@ -2629,12 +2710,13 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l
  * support MTFSFM when the filemark is in our internal pipeline even if the tape
  * doesn't support spacing over filemarks in the reverse direction.
  */
-static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_count)
+static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
+		int mt_count)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_pc_t pc;
 	unsigned long flags;
-	int retval,count=0;
+	int retval, count = 0;
 	int sprev = !!(tape->caps[4] & 0x20);
 
 	if (mt_count == 0)
@@ -2642,7 +2724,7 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
 	if (MTBSF == mt_op || MTBSFM == mt_op) {
 		if (!sprev)
 			return -EIO;
-		mt_count = - mt_count;
+		mt_count = -mt_count;
 	}
 
 	if (tape->chrdev_dir == IDETAPE_DIR_READ) {
@@ -2677,7 +2759,8 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
 				tape->next_stage = tape->first_stage->next;
 			} else
 				spin_unlock_irqrestore(&tape->lock, flags);
-			if (tape->first_stage->rq.errors == IDETAPE_ERROR_FILEMARK)
+			if (tape->first_stage->rq.errors ==
+					IDETAPE_ERROR_FILEMARK)
 				++count;
 			idetape_remove_stage_head(drive);
 		}
@@ -2689,21 +2772,25 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
 	 * the space command.
 	 */
 	switch (mt_op) {
-		case MTFSF:
-		case MTBSF:
-			idetape_create_space_cmd(&pc,mt_count-count,IDETAPE_SPACE_OVER_FILEMARK);
-			return (idetape_queue_pc_tail(drive, &pc));
-		case MTFSFM:
-		case MTBSFM:
-			if (!sprev)
-				return (-EIO);
-			retval = idetape_space_over_filemarks(drive, MTFSF, mt_count-count);
-			if (retval) return (retval);
-			count = (MTBSFM == mt_op ? 1 : -1);
-			return (idetape_space_over_filemarks(drive, MTFSF, count));
-		default:
-			printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",mt_op);
+	case MTFSF:
+	case MTBSF:
+		idetape_create_space_cmd(&pc, mt_count-count,
+					IDETAPE_SPACE_OVER_FILEMARK);
+		return (idetape_queue_pc_tail(drive, &pc));
+	case MTFSFM:
+	case MTBSFM:
+		if (!sprev)
 			return (-EIO);
+		retval = idetape_space_over_filemarks(drive, MTFSF,
+							mt_count-count);
+		if (retval)
+			return (retval);
+		count = (MTBSFM == mt_op ? 1 : -1);
+		return (idetape_space_over_filemarks(drive, MTFSF, count));
+	default:
+		printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",
+				mt_op);
+		return (-EIO);
 	}
 }
 
@@ -2723,12 +2810,12 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
  * (slightly) increased driver overhead, but will no longer hit performance.
  * This is not applicable to Onstream.
  */
-static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
+static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 				    size_t count, loff_t *ppos)
 {
 	struct ide_tape_obj *tape = ide_tape_f(file);
 	ide_drive_t *drive = tape->drive;
-	ssize_t bytes_read,temp, actually_read = 0, rc;
+	ssize_t bytes_read, temp, actually_read = 0, rc;
 	ssize_t ret = 0;
 	u16 ctl = *(u16 *)&tape->caps[12];
 
@@ -2746,8 +2833,10 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
 	if (count == 0)
 		return (0);
 	if (tape->merge_stage_size) {
-		actually_read = min((unsigned int)(tape->merge_stage_size), (unsigned int)count);
-		if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, actually_read))
+		actually_read = min((unsigned int)(tape->merge_stage_size),
+				(unsigned int)count);
+		if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage,
+						actually_read))
 			ret = -EFAULT;
 		buf += actually_read;
 		tape->merge_stage_size -= actually_read;
@@ -2757,7 +2846,8 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
 		bytes_read = idetape_add_chrdev_read_request(drive, ctl);
 		if (bytes_read <= 0)
 			goto finish;
-		if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, bytes_read))
+		if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage,
+						bytes_read))
 			ret = -EFAULT;
 		buf += bytes_read;
 		count -= bytes_read;
@@ -2768,7 +2858,8 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
 		if (bytes_read <= 0)
 			goto finish;
 		temp = min((unsigned long)count, (unsigned long)bytes_read);
-		if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, temp))
+		if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage,
+						temp))
 			ret = -EFAULT;
 		actually_read += temp;
 		tape->merge_stage_size = bytes_read-temp;
@@ -2784,7 +2875,7 @@ finish:
 	return (ret) ? ret : actually_read;
 }
 
-static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
+static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 				     size_t count, loff_t *ppos)
 {
 	struct ide_tape_obj *tape = ide_tape_f(file);
@@ -2808,7 +2899,8 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
 				"should be 0 now\n");
 			tape->merge_stage_size = 0;
 		}
-		if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
+		tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0);
+		if (!tape->merge_stage)
 			return -ENOMEM;
 		tape->chrdev_dir = IDETAPE_DIR_WRITE;
 		idetape_init_merge_stage(tape);
@@ -2820,7 +2912,9 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
 		 * drives (Seagate STT3401A) will return an error.
 		 */
 		if (drive->dsc_overlap) {
-			ssize_t retval = idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, 0, tape->merge_stage->bh);
+			ssize_t retval = idetape_queue_rw_tail(drive,
+							REQ_IDETAPE_WRITE, 0,
+							tape->merge_stage->bh);
 			if (retval < 0) {
 				__idetape_kfree_stage(tape->merge_stage);
 				tape->merge_stage = NULL;
@@ -2835,11 +2929,14 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
 		idetape_restart_speed_control(drive);
 	if (tape->merge_stage_size) {
 		if (tape->merge_stage_size >= tape->stage_size) {
-			printk(KERN_ERR "ide-tape: bug: merge buffer too big\n");
+			printk(KERN_ERR "ide-tape: bug: merge buf too big\n");
 			tape->merge_stage_size = 0;
 		}
-		actually_written = min((unsigned int)(tape->stage_size - tape->merge_stage_size), (unsigned int)count);
-		if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, actually_written))
+		actually_written = min((unsigned int)
+				(tape->stage_size - tape->merge_stage_size),
+				(unsigned int)count);
+		if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf,
+						actually_written))
 				ret = -EFAULT;
 		buf += actually_written;
 		tape->merge_stage_size += actually_written;
@@ -2855,7 +2952,8 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
 	}
 	while (count >= tape->stage_size) {
 		ssize_t retval;
-		if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, tape->stage_size))
+		if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf,
+						tape->stage_size))
 			ret = -EFAULT;
 		buf += tape->stage_size;
 		count -= tape->stage_size;
@@ -2866,14 +2964,15 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
 	}
 	if (count) {
 		actually_written += count;
-		if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, count))
+		if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf,
+						count))
 			ret = -EFAULT;
 		tape->merge_stage_size += count;
 	}
 	return (ret) ? ret : actually_written;
 }
 
-static int idetape_write_filemark (ide_drive_t *drive)
+static int idetape_write_filemark(ide_drive_t *drive)
 {
 	idetape_pc_t pc;
 
@@ -2904,110 +3003,117 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_pc_t pc;
-	int i,retval;
+	int i, retval;
 
 	debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n",
 			mt_op, mt_count);
 	/* Commands which need our pipelined read-ahead stages. */
 	switch (mt_op) {
-		case MTFSF:
-		case MTFSFM:
-		case MTBSF:
-		case MTBSFM:
-			if (!mt_count)
-				return (0);
-			return (idetape_space_over_filemarks(drive,mt_op,mt_count));
-		default:
-			break;
+	case MTFSF:
+	case MTFSFM:
+	case MTBSF:
+	case MTBSFM:
+		if (!mt_count)
+			return (0);
+		return (idetape_space_over_filemarks(drive, mt_op, mt_count));
+	default:
+		break;
 	}
 	switch (mt_op) {
-		case MTWEOF:
-			if (tape->write_prot)
-				return -EACCES;
-			idetape_discard_read_pipeline(drive, 1);
-			for (i = 0; i < mt_count; i++) {
-				retval = idetape_write_filemark(drive);
-				if (retval)
-					return retval;
-			}
-			return (0);
-		case MTREW:
-			idetape_discard_read_pipeline(drive, 0);
-			if (idetape_rewind_tape(drive))
+	case MTWEOF:
+		if (tape->write_prot)
+			return -EACCES;
+		idetape_discard_read_pipeline(drive, 1);
+		for (i = 0; i < mt_count; i++) {
+			retval = idetape_write_filemark(drive);
+			if (retval)
+				return retval;
+		}
+		return (0);
+	case MTREW:
+		idetape_discard_read_pipeline(drive, 0);
+		if (idetape_rewind_tape(drive))
+			return -EIO;
+		return 0;
+	case MTLOAD:
+		idetape_discard_read_pipeline(drive, 0);
+		idetape_create_load_unload_cmd(drive, &pc,
+						IDETAPE_LU_LOAD_MASK);
+		return (idetape_queue_pc_tail(drive, &pc));
+	case MTUNLOAD:
+	case MTOFFL:
+		/*
+		 * If door is locked, attempt to unlock before
+		 * attempting to eject.
+		 */
+		if (tape->door_locked) {
+			if (idetape_create_prevent_cmd(drive, &pc, 0))
+				if (!idetape_queue_pc_tail(drive, &pc))
+					tape->door_locked = DOOR_UNLOCKED;
+		}
+		idetape_discard_read_pipeline(drive, 0);
+		idetape_create_load_unload_cmd(drive, &pc,
+						!IDETAPE_LU_LOAD_MASK);
+		retval = idetape_queue_pc_tail(drive, &pc);
+		if (!retval)
+			tape->flags &= ~IDETAPE_FL_MEDIUM_PRESENT;
+		return retval;
+	case MTNOP:
+		idetape_discard_read_pipeline(drive, 0);
+		return (idetape_flush_tape_buffers(drive));
+	case MTRETEN:
+		idetape_discard_read_pipeline(drive, 0);
+		idetape_create_load_unload_cmd(drive, &pc,
+			IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
+		return (idetape_queue_pc_tail(drive, &pc));
+	case MTEOM:
+		idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
+		return (idetape_queue_pc_tail(drive, &pc));
+	case MTERASE:
+		(void) idetape_rewind_tape(drive);
+		idetape_create_erase_cmd(&pc);
+		return (idetape_queue_pc_tail(drive, &pc));
+	case MTSETBLK:
+		if (mt_count) {
+			if (mt_count < tape->blk_size ||
+			    mt_count % tape->blk_size)
 				return -EIO;
+			tape->user_bs_factor = mt_count /
+						tape->blk_size;
+			tape->flags &= ~IDETAPE_FL_DETECT_BS;
+		} else
+			tape->flags |= IDETAPE_FL_DETECT_BS;
+		return 0;
+	case MTSEEK:
+		idetape_discard_read_pipeline(drive, 0);
+		return idetape_position_tape(drive,
+					mt_count * tape->user_bs_factor,
+					tape->partition, 0);
+	case MTSETPART:
+		idetape_discard_read_pipeline(drive, 0);
+		return (idetape_position_tape(drive, 0, mt_count, 0));
+	case MTFSR:
+	case MTBSR:
+	case MTLOCK:
+		if (!idetape_create_prevent_cmd(drive, &pc, 1))
 			return 0;
-		case MTLOAD:
-			idetape_discard_read_pipeline(drive, 0);
-			idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK);
-			return (idetape_queue_pc_tail(drive, &pc));
-		case MTUNLOAD:
-		case MTOFFL:
-			/*
-			 * If door is locked, attempt to unlock before
-			 * attempting to eject.
-			 */
-			if (tape->door_locked) {
-				if (idetape_create_prevent_cmd(drive, &pc, 0))
-					if (!idetape_queue_pc_tail(drive, &pc))
-						tape->door_locked = DOOR_UNLOCKED;
-			}
-			idetape_discard_read_pipeline(drive, 0);
-			idetape_create_load_unload_cmd(drive, &pc,!IDETAPE_LU_LOAD_MASK);
-			retval = idetape_queue_pc_tail(drive, &pc);
-			if (!retval)
-				tape->flags &= ~IDETAPE_FL_MEDIUM_PRESENT;
+		retval = idetape_queue_pc_tail(drive, &pc);
+		if (retval)
 			return retval;
-		case MTNOP:
-			idetape_discard_read_pipeline(drive, 0);
-			return (idetape_flush_tape_buffers(drive));
-		case MTRETEN:
-			idetape_discard_read_pipeline(drive, 0);
-			idetape_create_load_unload_cmd(drive, &pc,IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
-			return (idetape_queue_pc_tail(drive, &pc));
-		case MTEOM:
-			idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
-			return (idetape_queue_pc_tail(drive, &pc));
-		case MTERASE:
-			(void) idetape_rewind_tape(drive);
-			idetape_create_erase_cmd(&pc);
-			return (idetape_queue_pc_tail(drive, &pc));
-		case MTSETBLK:
-			if (mt_count) {
-				if (mt_count < tape->blk_size ||
-				    mt_count % tape->blk_size)
-					return -EIO;
-				tape->user_bs_factor = mt_count /
-							tape->blk_size;
-				tape->flags &= ~IDETAPE_FL_DETECT_BS;
-			} else
-				tape->flags |= IDETAPE_FL_DETECT_BS;
-			return 0;
-		case MTSEEK:
-			idetape_discard_read_pipeline(drive, 0);
-			return idetape_position_tape(drive, mt_count * tape->user_bs_factor, tape->partition, 0);
-		case MTSETPART:
-			idetape_discard_read_pipeline(drive, 0);
-			return (idetape_position_tape(drive, 0, mt_count, 0));
-		case MTFSR:
-		case MTBSR:
-		case MTLOCK:
-			if (!idetape_create_prevent_cmd(drive, &pc, 1))
-				return 0;
-			retval = idetape_queue_pc_tail(drive, &pc);
-			if (retval) return retval;
-			tape->door_locked = DOOR_EXPLICITLY_LOCKED;
-			return 0;
-		case MTUNLOCK:
-			if (!idetape_create_prevent_cmd(drive, &pc, 0))
-				return 0;
-			retval = idetape_queue_pc_tail(drive, &pc);
-			if (retval) return retval;
-			tape->door_locked = DOOR_UNLOCKED;
+		tape->door_locked = DOOR_EXPLICITLY_LOCKED;
+		return 0;
+	case MTUNLOCK:
+		if (!idetape_create_prevent_cmd(drive, &pc, 0))
 			return 0;
-		default:
-			printk(KERN_ERR "ide-tape: MTIO operation %d not "
-				"supported\n", mt_op);
-			return (-EIO);
+		retval = idetape_queue_pc_tail(drive, &pc);
+		if (retval)
+			return retval;
+		tape->door_locked = DOOR_UNLOCKED;
+		return 0;
+	default:
+		printk(KERN_ERR "ide-tape: MTIO operation %d not "
+			"supported\n", mt_op);
+		return (-EIO);
 	}
 }
 
@@ -3037,37 +3143,38 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
 	if (cmd == MTIOCGET || cmd == MTIOCPOS) {
 		block_offset = idetape_pipeline_size(drive) /
 			(tape->blk_size * tape->user_bs_factor);
-		if ((position = idetape_read_position(drive)) < 0)
+		position = idetape_read_position(drive);
+		if (position < 0)
 			return -EIO;
 	}
 	switch (cmd) {
-		case MTIOCTOP:
-			if (copy_from_user(&mtop, argp, sizeof (struct mtop)))
-				return -EFAULT;
-			return (idetape_mtioctop(drive,mtop.mt_op,mtop.mt_count));
-		case MTIOCGET:
-			memset(&mtget, 0, sizeof (struct mtget));
-			mtget.mt_type = MT_ISSCSI2;
-			mtget.mt_blkno = position / tape->user_bs_factor - block_offset;
-			mtget.mt_dsreg =
-				((tape->blk_size * tape->user_bs_factor)
-				 << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK;
-
-			if (tape->drv_write_prot) {
-				mtget.mt_gstat |= GMT_WR_PROT(0xffffffff);
-			}
-			if (copy_to_user(argp, &mtget, sizeof(struct mtget)))
-				return -EFAULT;
-			return 0;
-		case MTIOCPOS:
-			mtpos.mt_blkno = position / tape->user_bs_factor - block_offset;
-			if (copy_to_user(argp, &mtpos, sizeof(struct mtpos)))
-				return -EFAULT;
-			return 0;
-		default:
-			if (tape->chrdev_dir == IDETAPE_DIR_READ)
-				idetape_discard_read_pipeline(drive, 1);
-			return idetape_blkdev_ioctl(drive, cmd, arg);
+	case MTIOCTOP:
+		if (copy_from_user(&mtop, argp, sizeof(struct mtop)))
+			return -EFAULT;
+		return (idetape_mtioctop(drive, mtop.mt_op, mtop.mt_count));
+	case MTIOCGET:
+		memset(&mtget, 0, sizeof(struct mtget));
+		mtget.mt_type = MT_ISSCSI2;
+		mtget.mt_blkno = position / tape->user_bs_factor - block_offset;
+		mtget.mt_dsreg =
+			((tape->blk_size * tape->user_bs_factor)
+			 << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK;
+
+		if (tape->drv_write_prot)
+			mtget.mt_gstat |= GMT_WR_PROT(0xffffffff);
+
+		if (copy_to_user(argp, &mtget, sizeof(struct mtget)))
+			return -EFAULT;
+		return 0;
+	case MTIOCPOS:
+		mtpos.mt_blkno = position / tape->user_bs_factor - block_offset;
+		if (copy_to_user(argp, &mtpos, sizeof(struct mtpos)))
+			return -EFAULT;
+		return 0;
+	default:
+		if (tape->chrdev_dir == IDETAPE_DIR_READ)
+			idetape_discard_read_pipeline(drive, 1);
+		return idetape_blkdev_ioctl(drive, cmd, arg);
 	}
 }
 
@@ -3096,7 +3203,7 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
 	tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7;
 }
 
-static int idetape_chrdev_open (struct inode *inode, struct file *filp)
+static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 {
 	unsigned int minor = iminor(inode), i = minor & ~0xc0;
 	ide_drive_t *drive;
@@ -3182,7 +3289,7 @@ out_put_tape:
 	return retval;
 }
 
-static void idetape_write_release (ide_drive_t *drive, unsigned int minor)
+static void idetape_write_release(ide_drive_t *drive, unsigned int minor)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
@@ -3199,7 +3306,7 @@ static void idetape_write_release (ide_drive_t *drive, unsigned int minor)
 	idetape_flush_tape_buffers(drive);
 }
 
-static int idetape_chrdev_release (struct inode *inode, struct file *filp)
+static int idetape_chrdev_release(struct inode *inode, struct file *filp)
 {
 	struct ide_tape_obj *tape = ide_tape_f(filp);
 	ide_drive_t *drive = tape->drive;
@@ -3308,7 +3415,7 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
  * Ask the tape about its various parameters. In particular, we will adjust our
  * data transfer buffer	size to the recommended value as returned by the tape.
  */
-static void idetape_get_mode_sense_results (ide_drive_t *drive)
+static void idetape_get_mode_sense_results(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_pc_t pc;
@@ -3355,17 +3462,24 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive)
 }
 
 #ifdef CONFIG_IDE_PROC_FS
-static void idetape_add_settings (ide_drive_t *drive)
+static void idetape_add_settings(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
 	ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff,
 			1, 2, (u16 *)&tape->caps[16], NULL);
-	ide_add_setting(drive,	"pipeline_min",		SETTING_RW,	TYPE_INT,	1,			0xffff,			tape->stage_size / 1024,	1,		&tape->min_pipeline,			NULL);
-	ide_add_setting(drive,	"pipeline",		SETTING_RW,	TYPE_INT,	1,			0xffff,			tape->stage_size / 1024,	1,		&tape->max_stages,			NULL);
-	ide_add_setting(drive,	"pipeline_max",		SETTING_RW,	TYPE_INT,	1,			0xffff,			tape->stage_size / 1024,	1,		&tape->max_pipeline,			NULL);
-	ide_add_setting(drive,	"pipeline_used",	SETTING_READ,	TYPE_INT,	0,			0xffff,			tape->stage_size / 1024,	1,		&tape->nr_stages,			NULL);
-	ide_add_setting(drive,	"pipeline_pending",	SETTING_READ,	TYPE_INT,	0,			0xffff,			tape->stage_size / 1024,	1,		&tape->nr_pending_stages,		NULL);
+	ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff,
+			tape->stage_size / 1024, 1, &tape->min_pipeline, NULL);
+	ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff,
+			tape->stage_size / 1024, 1, &tape->max_stages, NULL);
+	ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1,	0xffff,
+			tape->stage_size / 1024, 1, &tape->max_pipeline, NULL);
+	ide_add_setting(drive, "pipeline_used",	SETTING_READ, TYPE_INT, 0,
+			0xffff,	tape->stage_size / 1024, 1, &tape->nr_stages,
+			NULL);
+	ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0,
+			0xffff, tape->stage_size / 1024, 1,
+			&tape->nr_pending_stages, NULL);
 	ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff,
 			1, 1, (u16 *)&tape->caps[14], NULL);
 	ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT,	0, 0xffff, 1,
@@ -3373,10 +3487,16 @@ static void idetape_add_settings (ide_drive_t *drive)
 	ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN,
 			IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq,
 			NULL);
-	ide_add_setting(drive,	"dsc_overlap",		SETTING_RW,	TYPE_BYTE,	0,			1,			1,				1,		&drive->dsc_overlap,			NULL);
-	ide_add_setting(drive,	"pipeline_head_speed_c",SETTING_READ,	TYPE_INT,	0,			0xffff,			1,				1,		&tape->controlled_pipeline_head_speed,	NULL);
-	ide_add_setting(drive,	"pipeline_head_speed_u",SETTING_READ,	TYPE_INT,	0,			0xffff,			1,				1,		&tape->uncontrolled_pipeline_head_speed,NULL);
-	ide_add_setting(drive,	"avg_speed",		SETTING_READ,	TYPE_INT,	0,			0xffff,			1,				1,		&tape->avg_speed,			NULL);
+	ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1,
+			1, &drive->dsc_overlap, NULL);
+	ide_add_setting(drive, "pipeline_head_speed_c", SETTING_READ, TYPE_INT,
+			0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed,
+			NULL);
+	ide_add_setting(drive, "pipeline_head_speed_u", SETTING_READ, TYPE_INT,
+			0, 0xffff, 1, 1,
+			&tape->uncontrolled_pipeline_head_speed, NULL);
+	ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff,
+			1, 1, &tape->avg_speed, NULL);
 	ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1,
 			1, &tape->debug_mask, NULL);
 }
@@ -3394,7 +3514,7 @@ static inline void idetape_add_settings(ide_drive_t *drive) { ; }
  * this point ide.c already assigned us an irq, so that we can queue requests
  * here and wait for their completion.
  */
-static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
+static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 {
 	unsigned long t1, tmid, tn, t;
 	int speed;
@@ -3426,7 +3546,9 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	if (((gcw[0] & 0x60) >> 5) == 1)
 		tape->flags |= IDETAPE_FL_DRQ_INTERRUPT;
 
-	tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10;
+	tape->min_pipeline = 10;
+	tape->max_pipeline = 10;
+	tape->max_stages   = 10;
 
 	idetape_get_inquiry_results(drive);
 	idetape_get_mode_sense_results(drive);
@@ -3452,13 +3574,20 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 
 	/* Limit memory use for pipeline to 10% of physical memory */
 	si_meminfo(&si);
-	if (tape->max_stages * tape->stage_size > si.totalram * si.mem_unit / 10)
-		tape->max_stages = si.totalram * si.mem_unit / (10 * tape->stage_size);
+	if (tape->max_stages * tape->stage_size >
+			si.totalram * si.mem_unit / 10)
+		tape->max_stages =
+			si.totalram * si.mem_unit / (10 * tape->stage_size);
+
 	tape->max_stages   = min(tape->max_stages, IDETAPE_MAX_PIPELINE_STAGES);
 	tape->min_pipeline = min(tape->max_stages, IDETAPE_MIN_PIPELINE_STAGES);
-	tape->max_pipeline = min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES);
-	if (tape->max_stages == 0)
-		tape->max_stages = tape->min_pipeline = tape->max_pipeline = 1;
+	tape->max_pipeline =
+		min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES);
+	if (tape->max_stages == 0) {
+		tape->max_stages   = 1;
+		tape->min_pipeline = 1;
+		tape->max_pipeline = 1;
+	}
 
 	t1 = (tape->stage_size * HZ) / (speed * 1000);
 	tmid = (*(u16 *)&tape->caps[16] * 32 * HZ) / (speed * 125);
@@ -3510,7 +3639,8 @@ static void ide_tape_release(struct kref *kref)
 	drive->dsc_overlap = 0;
 	drive->driver_data = NULL;
 	device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor));
-	device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor + 128));
+	device_destroy(idetape_sysfs_class,
+			MKDEV(IDETAPE_MAJOR, tape->minor + 128));
 	idetape_devs[tape->minor] = NULL;
 	g->private_data = NULL;
 	put_disk(g);
@@ -3574,7 +3704,8 @@ static int idetape_open(struct inode *inode, struct file *filp)
 	struct gendisk *disk = inode->i_bdev->bd_disk;
 	struct ide_tape_obj *tape;
 
-	if (!(tape = ide_tape_get(disk)))
+	tape = ide_tape_get(disk);
+	if (!tape)
 		return -ENXIO;
 
 	return 0;
@@ -3621,17 +3752,20 @@ static int ide_tape_probe(ide_drive_t *drive)
 		goto failed;
 	if (drive->media != ide_tape)
 		goto failed;
-	if (!idetape_identify_device (drive)) {
-		printk(KERN_ERR "ide-tape: %s: not supported by this version of ide-tape\n", drive->name);
+	if (!idetape_identify_device(drive)) {
+		printk(KERN_ERR "ide-tape: %s: not supported by this version of"
+				" the driver\n", drive->name);
 		goto failed;
 	}
 	if (drive->scsi) {
-		printk("ide-tape: passing drive %s to ide-scsi emulation.\n", drive->name);
+		printk("ide-tape: passing drive %s to ide-scsi emulation.\n",
+				drive->name);
 		goto failed;
 	}
-	tape = kzalloc(sizeof (idetape_tape_t), GFP_KERNEL);
+	tape = kzalloc(sizeof(idetape_tape_t), GFP_KERNEL);
 	if (tape == NULL) {
-		printk(KERN_ERR "ide-tape: %s: Can't allocate a tape structure\n", drive->name);
+		printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n",
+				drive->name);
 		goto failed;
 	}
 
@@ -3677,7 +3811,7 @@ failed:
 	return -ENODEV;
 }
 
-static void __exit idetape_exit (void)
+static void __exit idetape_exit(void)
 {
 	driver_unregister(&idetape_driver.gen_driver);
 	class_destroy(idetape_sysfs_class);
@@ -3696,7 +3830,8 @@ static int __init idetape_init(void)
 	}
 
 	if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) {
-		printk(KERN_ERR "ide-tape: Failed to register character device interface\n");
+		printk(KERN_ERR "ide-tape: Failed to register chrdev"
+				" interface\n");
 		error = -EBUSY;
 		goto out_free_class;
 	}
-- 
1.5.3.7

Re: [PATCH 20/22] ide-tape: cleanup the remaining codestyle issues

[Bartlomiej Zolnierkiewicz]

On Monday 04 February 2008, Borislav Petkov wrote:
> ... thus decreasing checkpatch.pl errors to 0.
> 
> Signed-off-by: Borislav Petkov <petkovbb@gmail.com>

I did a couple of changes while merging the patch...
(I hope that I didn't break something in the process :)

From: Borislav Petkov <petkovbb@googlemail.com>
Subject: [PATCH 20/22] ide-tape: cleanup the remaining codestyle issues

... thus decreasing checkpatch.pl errors to 0.

Bart:
- remove needless function prototypes while at it
- remove needless parentheses while at it
- add missing KERN_ level to ide_tape_probe()
- other minor fixups

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-tape.c |  830 ++++++++++++++++++++++++++++---------------------
 1 file changed, 479 insertions(+), 351 deletions(-)

Index: b/drivers/ide/ide-tape.c
===================================================================
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -506,7 +506,7 @@ enum {
  * The variables below are used for the character device interface. Additional
  * state variables are defined in our ide_drive_t structure.
  */
-static struct ide_tape_obj * idetape_devs[MAX_HWIFS * MAX_DRIVES];
+static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
 
 #define ide_tape_f(file) ((file)->private_data)
 
@@ -522,20 +522,18 @@ static struct ide_tape_obj *ide_tape_chr
 	return tape;
 }
 
-static int idetape_chrdev_release (struct inode *inode, struct file *filp);
-static void idetape_write_release (ide_drive_t *drive, unsigned int minor);
-
 /*
  * Too bad. The drive wants to send us data which we are not ready to accept.
  * Just throw it away.
  */
-static void idetape_discard_data (ide_drive_t *drive, unsigned int bcount)
+static void idetape_discard_data(ide_drive_t *drive, unsigned int bcount)
 {
 	while (bcount--)
 		(void) HWIF(drive)->INB(IDE_DATA_REG);
 }
 
-static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigned int bcount)
+static void idetape_input_buffers(ide_drive_t *drive, idetape_pc_t *pc,
+				  unsigned int bcount)
 {
 	struct idetape_bh *bh = pc->bh;
 	int count;
@@ -547,8 +545,11 @@ static void idetape_input_buffers (ide_d
 			idetape_discard_data(drive, bcount);
 			return;
 		}
-		count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount);
-		HWIF(drive)->atapi_input_bytes(drive, bh->b_data + atomic_read(&bh->b_count), count);
+		count = min(
+			(unsigned int)(bh->b_size - atomic_read(&bh->b_count)),
+			bcount);
+		HWIF(drive)->atapi_input_bytes(drive, bh->b_data +
+					atomic_read(&bh->b_count), count);
 		bcount -= count;
 		atomic_add(count, &bh->b_count);
 		if (atomic_read(&bh->b_count) == bh->b_size) {
@@ -560,15 +561,16 @@ static void idetape_input_buffers (ide_d
 	pc->bh = bh;
 }
 
-static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigned int bcount)
+static void idetape_output_buffers(ide_drive_t *drive, idetape_pc_t *pc,
+				   unsigned int bcount)
 {
 	struct idetape_bh *bh = pc->bh;
 	int count;
 
 	while (bcount) {
 		if (bh == NULL) {
-			printk(KERN_ERR "ide-tape: bh == NULL in "
-				"idetape_output_buffers\n");
+			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+					__func__);
 			return;
 		}
 		count = min((unsigned int)pc->b_count, (unsigned int)bcount);
@@ -577,7 +579,8 @@ static void idetape_output_buffers (ide_
 		pc->b_data += count;
 		pc->b_count -= count;
 		if (!pc->b_count) {
-			pc->bh = bh = bh->b_reqnext;
+			bh = bh->b_reqnext;
+			pc->bh = bh;
 			if (bh) {
 				pc->b_data = bh->b_data;
 				pc->b_count = atomic_read(&bh->b_count);
@@ -586,7 +589,7 @@ static void idetape_output_buffers (ide_
 	}
 }
 
-static void idetape_update_buffers (idetape_pc_t *pc)
+static void idetape_update_buffers(idetape_pc_t *pc)
 {
 	struct idetape_bh *bh = pc->bh;
 	int count;
@@ -596,8 +599,8 @@ static void idetape_update_buffers (idet
 		return;
 	while (bcount) {
 		if (bh == NULL) {
-			printk(KERN_ERR "ide-tape: bh == NULL in "
-				"idetape_update_buffers\n");
+			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+					__func__);
 			return;
 		}
 		count = min((unsigned int)bh->b_size, (unsigned int)bcount);
@@ -615,14 +618,14 @@ static void idetape_update_buffers (idet
  *	driver. A storage space for a maximum of IDETAPE_PC_STACK packet
  *	commands is allocated at initialization time.
  */
-static idetape_pc_t *idetape_next_pc_storage (ide_drive_t *drive)
+static idetape_pc_t *idetape_next_pc_storage(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
 	debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index);
 
 	if (tape->pc_stack_index == IDETAPE_PC_STACK)
-		tape->pc_stack_index=0;
+		tape->pc_stack_index = 0;
 	return (&tape->pc_stack[tape->pc_stack_index++]);
 }
 
@@ -631,26 +634,26 @@ static idetape_pc_t *idetape_next_pc_sto
  *	Since we queue packet commands in the request queue, we need to
  *	allocate a request, along with the allocation of a packet command.
  */
- 
+
 /**************************************************************
  *                                                            *
  *  This should get fixed to use kmalloc(.., GFP_ATOMIC)      *
  *  followed later on by kfree().   -ml                       *
  *                                                            *
  **************************************************************/
- 
-static struct request *idetape_next_rq_storage (ide_drive_t *drive)
+
+static struct request *idetape_next_rq_storage(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
 	debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index);
 
 	if (tape->rq_stack_index == IDETAPE_PC_STACK)
-		tape->rq_stack_index=0;
+		tape->rq_stack_index = 0;
 	return (&tape->rq_stack[tape->rq_stack_index++]);
 }
 
-static void idetape_init_pc (idetape_pc_t *pc)
+static void idetape_init_pc(idetape_pc_t *pc)
 {
 	memset(pc->c, 0, 12);
 	pc->retries = 0;
@@ -746,7 +749,7 @@ static void idetape_activate_next_stage(
 }
 
 /* Free a stage along with its related buffers completely. */
-static void __idetape_kfree_stage (idetape_stage_t *stage)
+static void __idetape_kfree_stage(idetape_stage_t *stage)
 {
 	struct idetape_bh *prev_bh, *bh = stage->bh;
 	int size;
@@ -767,7 +770,7 @@ static void __idetape_kfree_stage (ideta
 	kfree(stage);
 }
 
-static void idetape_kfree_stage (idetape_tape_t *tape, idetape_stage_t *stage)
+static void idetape_kfree_stage(idetape_tape_t *tape, idetape_stage_t *stage)
 {
 	__idetape_kfree_stage(stage);
 }
@@ -776,7 +779,7 @@ static void idetape_kfree_stage (idetape
  * Remove tape->first_stage from the pipeline. The caller should avoid race
  * conditions.
  */
-static void idetape_remove_stage_head (ide_drive_t *drive)
+static void idetape_remove_stage_head(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_stage_t *stage;
@@ -799,9 +802,11 @@ static void idetape_remove_stage_head (i
 	if (tape->first_stage == NULL) {
 		tape->last_stage = NULL;
 		if (tape->next_stage != NULL)
-			printk(KERN_ERR "ide-tape: bug: tape->next_stage != NULL\n");
+			printk(KERN_ERR "ide-tape: bug: tape->next_stage !="
+					" NULL\n");
 		if (tape->nr_stages)
-			printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 now\n");
+			printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 "
+					"now\n");
 	}
 }
 
@@ -847,9 +852,9 @@ static int idetape_end_request(ide_drive
 	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	switch (uptodate) {
-		case 0:	error = IDETAPE_ERROR_GENERAL; break;
-		case 1: error = 0; break;
-		default: error = uptodate;
+	case 0:	error = IDETAPE_ERROR_GENERAL; break;
+	case 1: error = 0; break;
+	default: error = uptodate;
 	}
 	rq->errors = error;
 	if (error)
@@ -873,7 +878,8 @@ static int idetape_end_request(ide_drive
 			if (error) {
 				set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
 				if (error == IDETAPE_ERROR_EOD)
-					idetape_abort_pipeline(drive, active_stage);
+					idetape_abort_pipeline(drive,
+								active_stage);
 			}
 		} else if (rq->cmd[0] & REQ_IDETAPE_READ) {
 			if (error == IDETAPE_ERROR_EOD) {
@@ -906,9 +912,6 @@ static int idetape_end_request(ide_drive
 		}
 	}
 	ide_end_drive_cmd(drive, 0, 0);
-//	blkdev_dequeue_request(rq);
-//	drive->rq = NULL;
-//	end_that_request_last(rq);
 
 	if (remove_stage)
 		idetape_remove_stage_head(drive);
@@ -918,7 +921,7 @@ static int idetape_end_request(ide_drive
 	return 0;
 }
 
-static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive)
+static ide_startstop_t idetape_request_sense_callback(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
@@ -928,15 +931,16 @@ static ide_startstop_t idetape_request_s
 		idetape_analyze_error(drive, tape->pc->buffer);
 		idetape_end_request(drive, 1, 0);
 	} else {
-		printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - Aborting request!\n");
+		printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - "
+				"Aborting request!\n");
 		idetape_end_request(drive, 0, 0);
 	}
 	return ide_stopped;
 }
 
-static void idetape_create_request_sense_cmd (idetape_pc_t *pc)
+static void idetape_create_request_sense_cmd(idetape_pc_t *pc)
 {
-	idetape_init_pc(pc);	
+	idetape_init_pc(pc);
 	pc->c[0] = REQUEST_SENSE;
 	pc->c[4] = 20;
 	pc->request_transfer = 20;
@@ -965,7 +969,8 @@ static void idetape_init_rq(struct reque
  * handling functions should queue request to the lower level part and wait for
  * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail.
  */
-static void idetape_queue_pc_head (ide_drive_t *drive, idetape_pc_t *pc,struct request *rq)
+static void idetape_queue_pc_head(ide_drive_t *drive, idetape_pc_t *pc,
+				  struct request *rq)
 {
 	struct ide_tape_obj *tape = drive->driver_data;
 
@@ -999,7 +1004,7 @@ static ide_startstop_t idetape_retry_pc 
  * Postpone the current request so that ide.c will be able to service requests
  * from another device on the same hwgroup while we are polling for DSC.
  */
-static void idetape_postpone_request (ide_drive_t *drive)
+static void idetape_postpone_request(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
@@ -1027,7 +1032,7 @@ static ide_startstop_t idetape_pc_intr(i
 	idetape_io_buf *iobuf;
 	unsigned int temp;
 #if SIMULATE_ERRORS
-	static int error_sim_count = 0;
+	static int error_sim_count;
 #endif
 	u16 bcount;
 	u8 stat, ireason;
@@ -1228,8 +1233,9 @@ static ide_startstop_t idetape_transfer_
 	ide_startstop_t startstop;
 	u8 ireason;
 
-	if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) {
-		printk(KERN_ERR "ide-tape: Strange, packet command initiated yet DRQ isn't asserted\n");
+	if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+		printk(KERN_ERR "ide-tape: Strange, packet command initiated "
+				"yet DRQ isn't asserted\n");
 		return startstop;
 	}
 	ireason = hwif->INB(IDE_IREASON_REG);
@@ -1336,7 +1342,7 @@ static ide_startstop_t idetape_issue_pc(
 	}
 }
 
-static ide_startstop_t idetape_pc_callback (ide_drive_t *drive)
+static ide_startstop_t idetape_pc_callback(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
@@ -1347,7 +1353,7 @@ static ide_startstop_t idetape_pc_callba
 }
 
 /* A mode sense command is used to "sense" tape parameters. */
-static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code)
+static void idetape_create_mode_sense_cmd(idetape_pc_t *pc, u8 page_code)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = MODE_SENSE;
@@ -1378,39 +1384,56 @@ static void idetape_calculate_speeds(ide
 {
 	idetape_tape_t *tape = drive->driver_data;
 
-	if (time_after(jiffies, tape->controlled_pipeline_head_time + 120 * HZ)) {
-		tape->controlled_previous_pipeline_head = tape->controlled_last_pipeline_head;
-		tape->controlled_previous_head_time = tape->controlled_pipeline_head_time;
+	if (time_after(jiffies,
+			tape->controlled_pipeline_head_time + 120 * HZ)) {
+		tape->controlled_previous_pipeline_head =
+			tape->controlled_last_pipeline_head;
+		tape->controlled_previous_head_time =
+			tape->controlled_pipeline_head_time;
 		tape->controlled_last_pipeline_head = tape->pipeline_head;
 		tape->controlled_pipeline_head_time = jiffies;
 	}
 	if (time_after(jiffies, tape->controlled_pipeline_head_time + 60 * HZ))
-		tape->controlled_pipeline_head_speed = (tape->pipeline_head - tape->controlled_last_pipeline_head) * 32 * HZ / (jiffies - tape->controlled_pipeline_head_time);
+		tape->controlled_pipeline_head_speed = (tape->pipeline_head -
+				tape->controlled_last_pipeline_head) * 32 * HZ /
+				(jiffies - tape->controlled_pipeline_head_time);
 	else if (time_after(jiffies, tape->controlled_previous_head_time))
-		tape->controlled_pipeline_head_speed = (tape->pipeline_head - tape->controlled_previous_pipeline_head) * 32 * HZ / (jiffies - tape->controlled_previous_head_time);
+		tape->controlled_pipeline_head_speed = (tape->pipeline_head -
+				tape->controlled_previous_pipeline_head) * 32 *
+			HZ / (jiffies - tape->controlled_previous_head_time);
 
-	if (tape->nr_pending_stages < tape->max_stages /*- 1 */) {
+	if (tape->nr_pending_stages < tape->max_stages/*- 1 */) {
 		/* -1 for read mode error recovery */
-		if (time_after(jiffies, tape->uncontrolled_previous_head_time + 10 * HZ)) {
+		if (time_after(jiffies, tape->uncontrolled_previous_head_time +
+					10 * HZ)) {
 			tape->uncontrolled_pipeline_head_time = jiffies;
-			tape->uncontrolled_pipeline_head_speed = (tape->pipeline_head - tape->uncontrolled_previous_pipeline_head) * 32 * HZ / (jiffies - tape->uncontrolled_previous_head_time);
+			tape->uncontrolled_pipeline_head_speed =
+				(tape->pipeline_head -
+				 tape->uncontrolled_previous_pipeline_head) *
+				32 * HZ / (jiffies -
+					tape->uncontrolled_previous_head_time);
 		}
 	} else {
 		tape->uncontrolled_previous_head_time = jiffies;
 		tape->uncontrolled_previous_pipeline_head = tape->pipeline_head;
-		if (time_after(jiffies, tape->uncontrolled_pipeline_head_time + 30 * HZ)) {
+		if (time_after(jiffies, tape->uncontrolled_pipeline_head_time +
+					30 * HZ))
 			tape->uncontrolled_pipeline_head_time = jiffies;
-		}
+
 	}
-	tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed, tape->controlled_pipeline_head_speed);
+	tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed,
+					tape->controlled_pipeline_head_speed);
 
 	if (tape->speed_control == 1) {
 		if (tape->nr_pending_stages >= tape->max_stages / 2)
 			tape->max_insert_speed = tape->pipeline_head_speed +
-				(1100 - tape->pipeline_head_speed) * 2 * (tape->nr_pending_stages - tape->max_stages / 2) / tape->max_stages;
+				(1100 - tape->pipeline_head_speed) * 2 *
+				(tape->nr_pending_stages - tape->max_stages / 2)
+				/ tape->max_stages;
 		else
 			tape->max_insert_speed = 500 +
-				(tape->pipeline_head_speed - 500) * 2 * tape->nr_pending_stages / tape->max_stages;
+				(tape->pipeline_head_speed - 500) * 2 *
+				tape->nr_pending_stages / tape->max_stages;
 
 		if (tape->nr_pending_stages >= tape->max_stages * 99 / 100)
 			tape->max_insert_speed = 5000;
@@ -1420,7 +1443,7 @@ static void idetape_calculate_speeds(ide
 	tape->max_insert_speed = max(tape->max_insert_speed, 500);
 }
 
-static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive)
+static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_pc_t *pc = tape->pc;
@@ -1447,7 +1470,7 @@ static ide_startstop_t idetape_media_acc
 	return pc->callback(drive);
 }
 
-static ide_startstop_t idetape_rw_callback (ide_drive_t *drive)
+static ide_startstop_t idetape_rw_callback(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct request *rq = HWGROUP(drive)->rq;
@@ -1463,9 +1486,11 @@ static ide_startstop_t idetape_rw_callba
 		tape->insert_size = 0;
 	}
 	if (time_after(jiffies, tape->insert_time))
-		tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
+		tape->insert_speed = tape->insert_size / 1024 * HZ /
+					(jiffies - tape->insert_time);
 	if (time_after_eq(jiffies, tape->avg_time + HZ)) {
-		tape->avg_speed = tape->avg_size * HZ / (jiffies - tape->avg_time) / 1024;
+		tape->avg_speed = tape->avg_size * HZ /
+				(jiffies - tape->avg_time) / 1024;
 		tape->avg_size = 0;
 		tape->avg_time = jiffies;
 	}
@@ -1481,7 +1506,8 @@ static ide_startstop_t idetape_rw_callba
 	return ide_stopped;
 }
 
-static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
+static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
+		unsigned int length, struct idetape_bh *bh)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = READ_6;
@@ -1520,7 +1546,8 @@ static void idetape_create_read_buffer_c
 	pc->buffer_size = size;
 }
 
-static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh)
+static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
+		unsigned int length, struct idetape_bh *bh)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = WRITE_6;
@@ -1559,10 +1586,9 @@ static ide_startstop_t idetape_do_reques
 	}
 
 	/* Retry a failed packet command */
-	if (tape->failed_pc != NULL &&
-	    tape->pc->c[0] == REQUEST_SENSE) {
+	if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE)
 		return idetape_issue_pc(drive, tape->failed_pc);
-	}
+
 	if (postponed_rq != NULL)
 		if (rq != postponed_rq) {
 			printk(KERN_ERR "ide-tape: ide-tape.c bug - "
@@ -1588,7 +1614,8 @@ static ide_startstop_t idetape_do_reques
 	}
 
 	if (time_after(jiffies, tape->insert_time))
-		tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
+		tape->insert_speed = tape->insert_size / 1024 * HZ /
+					(jiffies - tape->insert_time);
 	idetape_calculate_speeds(drive);
 	if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) &&
 	    (stat & SEEK_STAT) == 0) {
@@ -1605,7 +1632,9 @@ static ide_startstop_t idetape_do_reques
 			} else {
 				return ide_do_reset(drive);
 			}
-		} else if (time_after(jiffies, tape->dsc_polling_start + IDETAPE_DSC_MA_THRESHOLD))
+		} else if (time_after(jiffies,
+					tape->dsc_polling_start +
+					IDETAPE_DSC_MA_THRESHOLD))
 			tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW;
 		idetape_postpone_request(drive);
 		return ide_stopped;
@@ -1614,14 +1643,16 @@ static ide_startstop_t idetape_do_reques
 		tape->buffer_head++;
 		tape->postpone_cnt = 0;
 		pc = idetape_next_pc_storage(drive);
-		idetape_create_read_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special);
+		idetape_create_read_cmd(tape, pc, rq->current_nr_sectors,
+					(struct idetape_bh *)rq->special);
 		goto out;
 	}
 	if (rq->cmd[0] & REQ_IDETAPE_WRITE) {
 		tape->buffer_head++;
 		tape->postpone_cnt = 0;
 		pc = idetape_next_pc_storage(drive);
-		idetape_create_write_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special);
+		idetape_create_write_cmd(tape, pc, rq->current_nr_sectors,
+					 (struct idetape_bh *)rq->special);
 		goto out;
 	}
 	if (rq->cmd[0] & REQ_IDETAPE_READ_BUFFER) {
@@ -1647,7 +1678,7 @@ out:
 }
 
 /* Pipeline related functions */
-static inline int idetape_pipeline_active (idetape_tape_t *tape)
+static inline int idetape_pipeline_active(idetape_tape_t *tape)
 {
 	int rc1, rc2;
 
@@ -1668,22 +1699,26 @@ static inline int idetape_pipeline_activ
  * Pipeline stages are optional and are used to increase performance. If we
  * can't allocate them, we'll manage without them.
  */
-static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full, int clear)
+static idetape_stage_t *__idetape_kmalloc_stage(idetape_tape_t *tape, int full,
+						int clear)
 {
 	idetape_stage_t *stage;
 	struct idetape_bh *prev_bh, *bh;
 	int pages = tape->pages_per_stage;
 	char *b_data = NULL;
 
-	if ((stage = kmalloc(sizeof (idetape_stage_t),GFP_KERNEL)) == NULL)
+	stage = kmalloc(sizeof(idetape_stage_t), GFP_KERNEL);
+	if (!stage)
 		return NULL;
 	stage->next = NULL;
 
-	bh = stage->bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
+	stage->bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
+	bh = stage->bh;
 	if (bh == NULL)
 		goto abort;
 	bh->b_reqnext = NULL;
-	if ((bh->b_data = (char *) __get_free_page (GFP_KERNEL)) == NULL)
+	bh->b_data = (char *) __get_free_page(GFP_KERNEL);
+	if (!bh->b_data)
 		goto abort;
 	if (clear)
 		memset(bh->b_data, 0, PAGE_SIZE);
@@ -1691,7 +1726,8 @@ static idetape_stage_t *__idetape_kmallo
 	atomic_set(&bh->b_count, full ? bh->b_size : 0);
 
 	while (--pages) {
-		if ((b_data = (char *) __get_free_page (GFP_KERNEL)) == NULL)
+		b_data = (char *) __get_free_page(GFP_KERNEL);
+		if (!b_data)
 			goto abort;
 		if (clear)
 			memset(b_data, 0, PAGE_SIZE);
@@ -1709,7 +1745,8 @@ static idetape_stage_t *__idetape_kmallo
 			continue;
 		}
 		prev_bh = bh;
-		if ((bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL)) == NULL) {
+		bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
+		if (!bh) {
 			free_page((unsigned long) b_data);
 			goto abort;
 		}
@@ -1728,7 +1765,7 @@ abort:
 	return NULL;
 }
 
-static idetape_stage_t *idetape_kmalloc_stage (idetape_tape_t *tape)
+static idetape_stage_t *idetape_kmalloc_stage(idetape_tape_t *tape)
 {
 	idetape_stage_t *cache_stage = tape->cache_stage;
 
@@ -1743,7 +1780,8 @@ static idetape_stage_t *idetape_kmalloc_
 	return __idetape_kmalloc_stage(tape, 0, 0);
 }
 
-static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t *stage, const char __user *buf, int n)
+static int idetape_copy_stage_from_user(idetape_tape_t *tape,
+		idetape_stage_t *stage, const char __user *buf, int n)
 {
 	struct idetape_bh *bh = tape->bh;
 	int count;
@@ -1751,12 +1789,15 @@ static int idetape_copy_stage_from_user 
 
 	while (n) {
 		if (bh == NULL) {
-			printk(KERN_ERR "ide-tape: bh == NULL in "
-				"idetape_copy_stage_from_user\n");
+			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+					__func__);
 			return 1;
 		}
-		count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), (unsigned int)n);
-		if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, count))
+		count = min((unsigned int)
+				(bh->b_size - atomic_read(&bh->b_count)),
+				(unsigned int)n);
+		if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf,
+				count))
 			ret = 1;
 		n -= count;
 		atomic_add(count, &bh->b_count);
@@ -1771,7 +1812,8 @@ static int idetape_copy_stage_from_user 
 	return ret;
 }
 
-static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, idetape_stage_t *stage, int n)
+static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf,
+		idetape_stage_t *stage, int n)
 {
 	struct idetape_bh *bh = tape->bh;
 	int count;
@@ -1779,8 +1821,8 @@ static int idetape_copy_stage_to_user (i
 
 	while (n) {
 		if (bh == NULL) {
-			printk(KERN_ERR "ide-tape: bh == NULL in "
-				"idetape_copy_stage_to_user\n");
+			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
+					__func__);
 			return 1;
 		}
 		count = min(tape->b_count, n);
@@ -1791,7 +1833,8 @@ static int idetape_copy_stage_to_user (i
 		tape->b_count -= count;
 		buf += count;
 		if (!tape->b_count) {
-			tape->bh = bh = bh->b_reqnext;
+			bh = bh->b_reqnext;
+			tape->bh = bh;
 			if (bh) {
 				tape->b_data = bh->b_data;
 				tape->b_count = atomic_read(&bh->b_count);
@@ -1801,10 +1844,10 @@ static int idetape_copy_stage_to_user (i
 	return ret;
 }
 
-static void idetape_init_merge_stage (idetape_tape_t *tape)
+static void idetape_init_merge_stage(idetape_tape_t *tape)
 {
 	struct idetape_bh *bh = tape->merge_stage->bh;
-	
+
 	tape->bh = bh;
 	if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
 		atomic_set(&bh->b_count, 0);
@@ -1814,7 +1857,7 @@ static void idetape_init_merge_stage (id
 	}
 }
 
-static void idetape_switch_buffers (idetape_tape_t *tape, idetape_stage_t *stage)
+static void idetape_switch_buffers(idetape_tape_t *tape, idetape_stage_t *stage)
 {
 	struct idetape_bh *tmp;
 
@@ -1825,7 +1868,7 @@ static void idetape_switch_buffers (idet
 }
 
 /* Add a new stage at the end of the pipeline. */
-static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage)
+static void idetape_add_stage_tail(ide_drive_t *drive, idetape_stage_t *stage)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	unsigned long flags;
@@ -1835,9 +1878,10 @@ static void idetape_add_stage_tail (ide_
 	spin_lock_irqsave(&tape->lock, flags);
 	stage->next = NULL;
 	if (tape->last_stage != NULL)
-		tape->last_stage->next=stage;
+		tape->last_stage->next = stage;
 	else
-		tape->first_stage = tape->next_stage=stage;
+		tape->first_stage = stage;
+		tape->next_stage  = stage;
 	tape->last_stage = stage;
 	if (tape->next_stage == NULL)
 		tape->next_stage = tape->last_stage;
@@ -1850,13 +1894,14 @@ static void idetape_add_stage_tail (ide_
  * caller should ensure that the request will not be serviced before we install
  * the completion (usually by disabling interrupts).
  */
-static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq)
+static void idetape_wait_for_request(ide_drive_t *drive, struct request *rq)
 {
 	DECLARE_COMPLETION_ONSTACK(wait);
 	idetape_tape_t *tape = drive->driver_data;
 
 	if (rq == NULL || !blk_special_request(rq)) {
-		printk (KERN_ERR "ide-tape: bug: Trying to sleep on non-valid request\n");
+		printk(KERN_ERR "ide-tape: bug: Trying to sleep on non-valid"
+				 " request\n");
 		return;
 	}
 	rq->end_io_data = &wait;
@@ -1905,7 +1950,8 @@ static ide_startstop_t idetape_read_posi
  * Write a filemark if write_filemark=1. Flush the device buffers without
  * writing a filemark otherwise.
  */
-static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t *pc,int write_filemark)
+static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
+		idetape_pc_t *pc, int write_filemark)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = WRITE_FILEMARKS;
@@ -1934,7 +1980,7 @@ static void idetape_create_test_unit_rea
  * to the request list without waiting for it to be serviced! In that case, we
  * usually use idetape_queue_pc_head().
  */
-static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc)
+static int __idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc)
 {
 	struct ide_tape_obj *tape = drive->driver_data;
 	struct request rq;
@@ -1945,7 +1991,8 @@ static int __idetape_queue_pc_tail (ide_
 	return ide_do_drive_cmd(drive, &rq, ide_wait);
 }
 
-static void idetape_create_load_unload_cmd (ide_drive_t *drive, idetape_pc_t *pc,int cmd)
+static void idetape_create_load_unload_cmd(ide_drive_t *drive, idetape_pc_t *pc,
+		int cmd)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = START_STOP;
@@ -1972,7 +2019,8 @@ static int idetape_wait_ready(ide_drive_
 			/* no media */
 			if (load_attempted)
 				return -ENOMEDIUM;
-			idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK);
+			idetape_create_load_unload_cmd(drive, &pc,
+							IDETAPE_LU_LOAD_MASK);
 			__idetape_queue_pc_tail(drive, &pc);
 			load_attempted = 1;
 		/* not about to be ready */
@@ -1984,24 +2032,25 @@ static int idetape_wait_ready(ide_drive_
 	return -EIO;
 }
 
-static int idetape_queue_pc_tail (ide_drive_t *drive,idetape_pc_t *pc)
+static int idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc)
 {
 	return __idetape_queue_pc_tail(drive, pc);
 }
 
-static int idetape_flush_tape_buffers (ide_drive_t *drive)
+static int idetape_flush_tape_buffers(ide_drive_t *drive)
 {
 	idetape_pc_t pc;
 	int rc;
 
 	idetape_create_write_filemark_cmd(drive, &pc, 0);
-	if ((rc = idetape_queue_pc_tail(drive, &pc)))
+	rc = idetape_queue_pc_tail(drive, &pc);
+	if (rc)
 		return rc;
 	idetape_wait_ready(drive, 60 * 5 * HZ);
 	return 0;
 }
 
-static void idetape_create_read_position_cmd (idetape_pc_t *pc)
+static void idetape_create_read_position_cmd(idetape_pc_t *pc)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = READ_POSITION;
@@ -2009,7 +2058,7 @@ static void idetape_create_read_position
 	pc->callback = &idetape_read_position_callback;
 }
 
-static int idetape_read_position (ide_drive_t *drive)
+static int idetape_read_position(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_pc_t pc;
@@ -2024,7 +2073,8 @@ static int idetape_read_position (ide_dr
 	return position;
 }
 
-static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, unsigned int block, u8 partition, int skip)
+static void idetape_create_locate_cmd(ide_drive_t *drive, idetape_pc_t *pc,
+		unsigned int block, u8 partition, int skip)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = POSITION_TO_ELEMENT;
@@ -2035,7 +2085,8 @@ static void idetape_create_locate_cmd (i
 	pc->callback = &idetape_pc_callback;
 }
 
-static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int prevent)
+static int idetape_create_prevent_cmd(ide_drive_t *drive, idetape_pc_t *pc,
+				      int prevent)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
@@ -2050,7 +2101,7 @@ static int idetape_create_prevent_cmd (i
 	return 1;
 }
 
-static int __idetape_discard_read_pipeline (ide_drive_t *drive)
+static int __idetape_discard_read_pipeline(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	unsigned long flags;
@@ -2086,7 +2137,7 @@ static int __idetape_discard_read_pipeli
 	while (tape->first_stage != NULL) {
 		struct request *rq_ptr = &tape->first_stage->rq;
 
-		cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors; 
+		cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors;
 		if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK)
 			++cnt;
 		idetape_remove_stage_head(drive);
@@ -2102,7 +2153,8 @@ static int __idetape_discard_read_pipeli
  * all higher level operations, we queue the commands at the tail of the request
  * queue and wait for their completion.
  */
-static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 partition, int skip)
+static int idetape_position_tape(ide_drive_t *drive, unsigned int block,
+		u8 partition, int skip)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	int retval;
@@ -2120,7 +2172,8 @@ static int idetape_position_tape (ide_dr
 	return (idetape_queue_pc_tail(drive, &pc));
 }
 
-static void idetape_discard_read_pipeline (ide_drive_t *drive, int restore_position)
+static void idetape_discard_read_pipeline(ide_drive_t *drive,
+					  int restore_position)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	int cnt;
@@ -2131,7 +2184,8 @@ static void idetape_discard_read_pipelin
 		position = idetape_read_position(drive);
 		seek = position > cnt ? position - cnt : 0;
 		if (idetape_position_tape(drive, seek, 0, 0)) {
-			printk(KERN_INFO "ide-tape: %s: position_tape failed in discard_pipeline()\n", tape->name);
+			printk(KERN_INFO "ide-tape: %s: position_tape failed in"
+					 " discard_pipeline()\n", tape->name);
 			return;
 		}
 	}
@@ -2141,7 +2195,8 @@ static void idetape_discard_read_pipelin
  * Generate a read/write request for the block device interface and wait for it
  * to be serviced.
  */
-static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh)
+static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
+				 struct idetape_bh *bh)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct request rq;
@@ -2158,7 +2213,8 @@ static int idetape_queue_rw_tail(ide_dri
 	rq.rq_disk = tape->disk;
 	rq.special = (void *)bh;
 	rq.sector = tape->first_frame;
-	rq.nr_sectors = rq.current_nr_sectors = blocks;
+	rq.nr_sectors		= blocks;
+	rq.current_nr_sectors	= blocks;
 	(void) ide_do_drive_cmd(drive, &rq, ide_wait);
 
 	if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0)
@@ -2185,15 +2241,16 @@ static void idetape_plug_pipeline(ide_dr
 	}
 }
 
-static void idetape_create_inquiry_cmd (idetape_pc_t *pc)
+static void idetape_create_inquiry_cmd(idetape_pc_t *pc)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = INQUIRY;
-	pc->c[4] = pc->request_transfer = 254;
+	pc->c[4] = 254;
+	pc->request_transfer = 254;
 	pc->callback = &idetape_pc_callback;
 }
 
-static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc)
+static void idetape_create_rewind_cmd(ide_drive_t *drive, idetape_pc_t *pc)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = REZERO_UNIT;
@@ -2201,7 +2258,7 @@ static void idetape_create_rewind_cmd (i
 	pc->callback = &idetape_pc_callback;
 }
 
-static void idetape_create_erase_cmd (idetape_pc_t *pc)
+static void idetape_create_erase_cmd(idetape_pc_t *pc)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = ERASE;
@@ -2210,7 +2267,7 @@ static void idetape_create_erase_cmd (id
 	pc->callback = &idetape_pc_callback;
 }
 
-static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd)
+static void idetape_create_space_cmd(idetape_pc_t *pc, int count, u8 cmd)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = SPACE;
@@ -2220,7 +2277,7 @@ static void idetape_create_space_cmd (id
 	pc->callback = &idetape_pc_callback;
 }
 
-static void idetape_wait_first_stage (ide_drive_t *drive)
+static void idetape_wait_first_stage(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	unsigned long flags;
@@ -2244,7 +2301,7 @@ static void idetape_wait_first_stage (id
  * 3. If we still can't allocate a stage, fallback to non-pipelined operation
  * mode for this request.
  */
-static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks)
+static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_stage_t *new_stage;
@@ -2268,14 +2325,16 @@ static int idetape_add_chrdev_write_requ
 			 * The machine is short on memory. Fallback to non-
 			 * pipelined operation mode for this request.
 			 */
-			return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh);
+			return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
+						blocks, tape->merge_stage->bh);
 		}
 	}
 	rq = &new_stage->rq;
 	idetape_init_rq(rq, REQ_IDETAPE_WRITE);
 	/* Doesn't actually matter - We always assume sequential access */
 	rq->sector = tape->first_frame;
-	rq->nr_sectors = rq->current_nr_sectors = blocks;
+	rq->current_nr_sectors = blocks;
+	rq->nr_sectors = blocks;
 
 	idetape_switch_buffers(tape, new_stage);
 	idetape_add_stage_tail(drive, new_stage);
@@ -2311,7 +2370,7 @@ static int idetape_add_chrdev_write_requ
  * Wait until all pending pipeline requests are serviced. Typically called on
  * device close.
  */
-static void idetape_wait_for_pipeline (ide_drive_t *drive)
+static void idetape_wait_for_pipeline(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	unsigned long flags;
@@ -2325,14 +2384,15 @@ static void idetape_wait_for_pipeline (i
 	}
 }
 
-static void idetape_empty_write_pipeline (ide_drive_t *drive)
+static void idetape_empty_write_pipeline(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	int blocks, min;
 	struct idetape_bh *bh;
 
 	if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
-		printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline, but we are not writing.\n");
+		printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline,"
+				" but we are not writing.\n");
 		return;
 	}
 	if (tape->merge_stage_size > tape->stage_size) {
@@ -2355,12 +2415,14 @@ static void idetape_empty_write_pipeline
 			bh = tape->bh;
 			while (i) {
 				if (bh == NULL) {
-
-					printk(KERN_INFO "ide-tape: bug, bh NULL\n");
+					printk(KERN_INFO "ide-tape: bug,"
+							 " bh NULL\n");
 					break;
 				}
-				min = min(i, (unsigned int)(bh->b_size - atomic_read(&bh->b_count)));
-				memset(bh->b_data + atomic_read(&bh->b_count), 0, min);
+				min = min(i, (unsigned int)(bh->b_size -
+						atomic_read(&bh->b_count)));
+				memset(bh->b_data + atomic_read(&bh->b_count),
+						0, min);
 				atomic_add(min, &bh->b_count);
 				i -= min;
 				bh = bh->b_reqnext;
@@ -2396,18 +2458,22 @@ static void idetape_empty_write_pipeline
 	}
 }
 
-static void idetape_restart_speed_control (ide_drive_t *drive)
+static void idetape_restart_speed_control(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
 	tape->restart_speed_control_req = 0;
 	tape->pipeline_head = 0;
 	tape->controlled_last_pipeline_head = 0;
-	tape->controlled_previous_pipeline_head = tape->uncontrolled_previous_pipeline_head = 0;
-	tape->pipeline_head_speed = tape->controlled_pipeline_head_speed = 5000;
+	tape->controlled_previous_pipeline_head = 0;
+	tape->uncontrolled_previous_pipeline_head = 0;
+	tape->controlled_pipeline_head_speed = 5000;
+	tape->pipeline_head_speed = 5000;
 	tape->uncontrolled_pipeline_head_speed = 0;
-	tape->controlled_pipeline_head_time = tape->uncontrolled_pipeline_head_time = jiffies;
-	tape->controlled_previous_head_time = tape->uncontrolled_previous_head_time = jiffies;
+	tape->controlled_pipeline_head_time =
+		tape->uncontrolled_pipeline_head_time = jiffies;
+	tape->controlled_previous_head_time =
+		tape->uncontrolled_previous_head_time = jiffies;
 }
 
 static int idetape_init_read(ide_drive_t *drive, int max_stages)
@@ -2425,10 +2491,12 @@ static int idetape_init_read(ide_drive_t
 			idetape_flush_tape_buffers(drive);
 		}
 		if (tape->merge_stage || tape->merge_stage_size) {
-			printk (KERN_ERR "ide-tape: merge_stage_size should be 0 now\n");
+			printk(KERN_ERR "ide-tape: merge_stage_size should be"
+					 " 0 now\n");
 			tape->merge_stage_size = 0;
 		}
-		if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
+		tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0);
+		if (!tape->merge_stage)
 			return -ENOMEM;
 		tape->chrdev_dir = IDETAPE_DIR_READ;
 
@@ -2439,7 +2507,9 @@ static int idetape_init_read(ide_drive_t
 		 * drives (Seagate STT3401A) will return an error.
 		 */
 		if (drive->dsc_overlap) {
-			bytes_read = idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, 0, tape->merge_stage->bh);
+			bytes_read = idetape_queue_rw_tail(drive,
+							REQ_IDETAPE_READ, 0,
+							tape->merge_stage->bh);
 			if (bytes_read < 0) {
 				__idetape_kfree_stage(tape->merge_stage);
 				tape->merge_stage = NULL;
@@ -2452,7 +2522,8 @@ static int idetape_init_read(ide_drive_t
 		idetape_restart_speed_control(drive);
 	idetape_init_rq(&rq, REQ_IDETAPE_READ);
 	rq.sector = tape->first_frame;
-	rq.nr_sectors = rq.current_nr_sectors = blocks;
+	rq.nr_sectors = blocks;
+	rq.current_nr_sectors = blocks;
 	if (!test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags) &&
 	    tape->nr_stages < max_stages) {
 		new_stage = idetape_kmalloc_stage(tape);
@@ -2480,7 +2551,7 @@ static int idetape_init_read(ide_drive_t
  * Called from idetape_chrdev_read() to service a character device read request
  * and add read-ahead requests to our pipeline.
  */
-static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks)
+static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	unsigned long flags;
@@ -2505,8 +2576,8 @@ static int idetape_add_chrdev_read_reque
 	rq_ptr = &tape->first_stage->rq;
 	bytes_read = tape->blk_size * (rq_ptr->nr_sectors -
 					rq_ptr->current_nr_sectors);
-	rq_ptr->nr_sectors = rq_ptr->current_nr_sectors = 0;
-
+	rq_ptr->nr_sectors = 0;
+	rq_ptr->current_nr_sectors = 0;
 
 	if (rq_ptr->errors == IDETAPE_ERROR_EOD)
 		return 0;
@@ -2521,13 +2592,14 @@ static int idetape_add_chrdev_read_reque
 		idetape_calculate_speeds(drive);
 	}
 	if (bytes_read > blocks * tape->blk_size) {
-		printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n");
+		printk(KERN_ERR "ide-tape: bug: trying to return more bytes"
+				" than requested\n");
 		bytes_read = blocks * tape->blk_size;
 	}
 	return (bytes_read);
 }
 
-static void idetape_pad_zeros (ide_drive_t *drive, int bcount)
+static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct idetape_bh *bh;
@@ -2541,16 +2613,18 @@ static void idetape_pad_zeros (ide_drive
 		bcount -= count;
 		blocks = count / tape->blk_size;
 		while (count) {
-			atomic_set(&bh->b_count, min(count, (unsigned int)bh->b_size));
+			atomic_set(&bh->b_count,
+				   min(count, (unsigned int)bh->b_size));
 			memset(bh->b_data, 0, atomic_read(&bh->b_count));
 			count -= atomic_read(&bh->b_count);
 			bh = bh->b_reqnext;
 		}
-		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh);
+		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks,
+				      tape->merge_stage->bh);
 	}
 }
 
-static int idetape_pipeline_size (ide_drive_t *drive)
+static int idetape_pipeline_size(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_stage_t *stage;
@@ -2575,7 +2649,7 @@ static int idetape_pipeline_size (ide_dr
  * Rewinds the tape to the Beginning Of the current Partition (BOP). We
  * currently support only one partition.
  */
-static int idetape_rewind_tape (ide_drive_t *drive)
+static int idetape_rewind_tape(ide_drive_t *drive)
 {
 	int retval;
 	idetape_pc_t pc;
@@ -2597,7 +2671,8 @@ static int idetape_rewind_tape (ide_driv
 }
 
 /* mtio.h compatible commands should be issued to the chrdev interface. */
-static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned long arg)
+static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd,
+				unsigned long arg)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	void __user *argp = (void __user *)arg;
@@ -2611,20 +2686,20 @@ static int idetape_blkdev_ioctl(ide_driv
 	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	switch (cmd) {
-		case 0x0340:
-			if (copy_from_user(&config, argp, sizeof(config)))
-				return -EFAULT;
-			tape->best_dsc_rw_freq = config.dsc_rw_frequency;
-			tape->max_stages = config.nr_stages;
-			break;
-		case 0x0350:
-			config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
-			config.nr_stages = tape->max_stages; 
-			if (copy_to_user(argp, &config, sizeof(config)))
-				return -EFAULT;
-			break;
-		default:
-			return -EIO;
+	case 0x0340:
+		if (copy_from_user(&config, argp, sizeof(config)))
+			return -EFAULT;
+		tape->best_dsc_rw_freq = config.dsc_rw_frequency;
+		tape->max_stages = config.nr_stages;
+		break;
+	case 0x0350:
+		config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
+		config.nr_stages = tape->max_stages;
+		if (copy_to_user(argp, &config, sizeof(config)))
+			return -EFAULT;
+		break;
+	default:
+		return -EIO;
 	}
 	return 0;
 }
@@ -2636,12 +2711,13 @@ static int idetape_blkdev_ioctl(ide_driv
  * support MTFSFM when the filemark is in our internal pipeline even if the tape
  * doesn't support spacing over filemarks in the reverse direction.
  */
-static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_count)
+static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
+					int mt_count)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_pc_t pc;
 	unsigned long flags;
-	int retval,count=0;
+	int retval, count = 0;
 	int sprev = !!(tape->caps[4] & 0x20);
 
 	if (mt_count == 0)
@@ -2649,7 +2725,7 @@ static int idetape_space_over_filemarks 
 	if (MTBSF == mt_op || MTBSFM == mt_op) {
 		if (!sprev)
 			return -EIO;
-		mt_count = - mt_count;
+		mt_count = -mt_count;
 	}
 
 	if (tape->chrdev_dir == IDETAPE_DIR_READ) {
@@ -2682,7 +2758,8 @@ static int idetape_space_over_filemarks 
 				tape->next_stage = tape->first_stage->next;
 			} else
 				spin_unlock_irqrestore(&tape->lock, flags);
-			if (tape->first_stage->rq.errors == IDETAPE_ERROR_FILEMARK)
+			if (tape->first_stage->rq.errors ==
+					IDETAPE_ERROR_FILEMARK)
 				++count;
 			idetape_remove_stage_head(drive);
 		}
@@ -2694,25 +2771,28 @@ static int idetape_space_over_filemarks 
 	 * the space command.
 	 */
 	switch (mt_op) {
-		case MTFSF:
-		case MTBSF:
-			idetape_create_space_cmd(&pc,mt_count-count,IDETAPE_SPACE_OVER_FILEMARK);
-			return (idetape_queue_pc_tail(drive, &pc));
-		case MTFSFM:
-		case MTBSFM:
-			if (!sprev)
-				return (-EIO);
-			retval = idetape_space_over_filemarks(drive, MTFSF, mt_count-count);
-			if (retval) return (retval);
-			count = (MTBSFM == mt_op ? 1 : -1);
-			return (idetape_space_over_filemarks(drive, MTFSF, count));
-		default:
-			printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",mt_op);
-			return (-EIO);
+	case MTFSF:
+	case MTBSF:
+		idetape_create_space_cmd(&pc, mt_count - count,
+					 IDETAPE_SPACE_OVER_FILEMARK);
+		return idetape_queue_pc_tail(drive, &pc);
+	case MTFSFM:
+	case MTBSFM:
+		if (!sprev)
+			return -EIO;
+		retval = idetape_space_over_filemarks(drive, MTFSF,
+						      mt_count - count);
+		if (retval)
+			return retval;
+		count = (MTBSFM == mt_op ? 1 : -1);
+		return idetape_space_over_filemarks(drive, MTFSF, count);
+	default:
+		printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",
+				mt_op);
+		return -EIO;
 	}
 }
 
-
 /*
  * Our character device read / write functions.
  *
@@ -2728,12 +2808,12 @@ static int idetape_space_over_filemarks 
  * (slightly) increased driver overhead, but will no longer hit performance.
  * This is not applicable to Onstream.
  */
-static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
-				    size_t count, loff_t *ppos)
+static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
+				   size_t count, loff_t *ppos)
 {
 	struct ide_tape_obj *tape = ide_tape_f(file);
 	ide_drive_t *drive = tape->drive;
-	ssize_t bytes_read,temp, actually_read = 0, rc;
+	ssize_t bytes_read, temp, actually_read = 0, rc;
 	ssize_t ret = 0;
 	u16 ctl = *(u16 *)&tape->caps[12];
 
@@ -2751,8 +2831,10 @@ static ssize_t idetape_chrdev_read (stru
 	if (count == 0)
 		return (0);
 	if (tape->merge_stage_size) {
-		actually_read = min((unsigned int)(tape->merge_stage_size), (unsigned int)count);
-		if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, actually_read))
+		actually_read = min((unsigned int)(tape->merge_stage_size),
+				    (unsigned int)count);
+		if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage,
+					       actually_read))
 			ret = -EFAULT;
 		buf += actually_read;
 		tape->merge_stage_size -= actually_read;
@@ -2762,7 +2844,8 @@ static ssize_t idetape_chrdev_read (stru
 		bytes_read = idetape_add_chrdev_read_request(drive, ctl);
 		if (bytes_read <= 0)
 			goto finish;
-		if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, bytes_read))
+		if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage,
+					       bytes_read))
 			ret = -EFAULT;
 		buf += bytes_read;
 		count -= bytes_read;
@@ -2773,7 +2856,8 @@ static ssize_t idetape_chrdev_read (stru
 		if (bytes_read <= 0)
 			goto finish;
 		temp = min((unsigned long)count, (unsigned long)bytes_read);
-		if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, temp))
+		if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage,
+					       temp))
 			ret = -EFAULT;
 		actually_read += temp;
 		tape->merge_stage_size = bytes_read-temp;
@@ -2786,10 +2870,10 @@ finish:
 		return 0;
 	}
 
-	return (ret) ? ret : actually_read;
+	return ret ? ret : actually_read;
 }
 
-static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
+static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 				     size_t count, loff_t *ppos)
 {
 	struct ide_tape_obj *tape = ide_tape_f(file);
@@ -2813,7 +2897,8 @@ static ssize_t idetape_chrdev_write (str
 				"should be 0 now\n");
 			tape->merge_stage_size = 0;
 		}
-		if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL)
+		tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0);
+		if (!tape->merge_stage)
 			return -ENOMEM;
 		tape->chrdev_dir = IDETAPE_DIR_WRITE;
 		idetape_init_merge_stage(tape);
@@ -2825,7 +2910,9 @@ static ssize_t idetape_chrdev_write (str
 		 * drives (Seagate STT3401A) will return an error.
 		 */
 		if (drive->dsc_overlap) {
-			ssize_t retval = idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, 0, tape->merge_stage->bh);
+			ssize_t retval = idetape_queue_rw_tail(drive,
+							REQ_IDETAPE_WRITE, 0,
+							tape->merge_stage->bh);
 			if (retval < 0) {
 				__idetape_kfree_stage(tape->merge_stage);
 				tape->merge_stage = NULL;
@@ -2840,11 +2927,14 @@ static ssize_t idetape_chrdev_write (str
 		idetape_restart_speed_control(drive);
 	if (tape->merge_stage_size) {
 		if (tape->merge_stage_size >= tape->stage_size) {
-			printk(KERN_ERR "ide-tape: bug: merge buffer too big\n");
+			printk(KERN_ERR "ide-tape: bug: merge buf too big\n");
 			tape->merge_stage_size = 0;
 		}
-		actually_written = min((unsigned int)(tape->stage_size - tape->merge_stage_size), (unsigned int)count);
-		if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, actually_written))
+		actually_written = min((unsigned int)
+				(tape->stage_size - tape->merge_stage_size),
+				(unsigned int)count);
+		if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf,
+						 actually_written))
 				ret = -EFAULT;
 		buf += actually_written;
 		tape->merge_stage_size += actually_written;
@@ -2860,7 +2950,8 @@ static ssize_t idetape_chrdev_write (str
 	}
 	while (count >= tape->stage_size) {
 		ssize_t retval;
-		if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, tape->stage_size))
+		if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf,
+						 tape->stage_size))
 			ret = -EFAULT;
 		buf += tape->stage_size;
 		count -= tape->stage_size;
@@ -2871,14 +2962,15 @@ static ssize_t idetape_chrdev_write (str
 	}
 	if (count) {
 		actually_written += count;
-		if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, count))
+		if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf,
+						 count))
 			ret = -EFAULT;
 		tape->merge_stage_size += count;
 	}
-	return (ret) ? ret : actually_written;
+	return ret ? ret : actually_written;
 }
 
-static int idetape_write_filemark (ide_drive_t *drive)
+static int idetape_write_filemark(ide_drive_t *drive)
 {
 	idetape_pc_t pc;
 
@@ -2909,110 +3001,117 @@ static int idetape_mtioctop(ide_drive_t 
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_pc_t pc;
-	int i,retval;
+	int i, retval;
 
 	debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n",
 			mt_op, mt_count);
+
 	/* Commands which need our pipelined read-ahead stages. */
 	switch (mt_op) {
-		case MTFSF:
-		case MTFSFM:
-		case MTBSF:
-		case MTBSFM:
-			if (!mt_count)
-				return (0);
-			return (idetape_space_over_filemarks(drive,mt_op,mt_count));
-		default:
-			break;
+	case MTFSF:
+	case MTFSFM:
+	case MTBSF:
+	case MTBSFM:
+		if (!mt_count)
+			return 0;
+		return idetape_space_over_filemarks(drive, mt_op, mt_count);
+	default:
+		break;
 	}
+
 	switch (mt_op) {
-		case MTWEOF:
-			if (tape->write_prot)
-				return -EACCES;
-			idetape_discard_read_pipeline(drive, 1);
-			for (i = 0; i < mt_count; i++) {
-				retval = idetape_write_filemark(drive);
-				if (retval)
-					return retval;
-			}
-			return (0);
-		case MTREW:
-			idetape_discard_read_pipeline(drive, 0);
-			if (idetape_rewind_tape(drive))
+	case MTWEOF:
+		if (tape->write_prot)
+			return -EACCES;
+		idetape_discard_read_pipeline(drive, 1);
+		for (i = 0; i < mt_count; i++) {
+			retval = idetape_write_filemark(drive);
+			if (retval)
+				return retval;
+		}
+		return 0;
+	case MTREW:
+		idetape_discard_read_pipeline(drive, 0);
+		if (idetape_rewind_tape(drive))
+			return -EIO;
+		return 0;
+	case MTLOAD:
+		idetape_discard_read_pipeline(drive, 0);
+		idetape_create_load_unload_cmd(drive, &pc,
+					       IDETAPE_LU_LOAD_MASK);
+		return idetape_queue_pc_tail(drive, &pc);
+	case MTUNLOAD:
+	case MTOFFL:
+		/*
+		 * If door is locked, attempt to unlock before
+		 * attempting to eject.
+		 */
+		if (tape->door_locked) {
+			if (idetape_create_prevent_cmd(drive, &pc, 0))
+				if (!idetape_queue_pc_tail(drive, &pc))
+					tape->door_locked = DOOR_UNLOCKED;
+		}
+		idetape_discard_read_pipeline(drive, 0);
+		idetape_create_load_unload_cmd(drive, &pc,
+					      !IDETAPE_LU_LOAD_MASK);
+		retval = idetape_queue_pc_tail(drive, &pc);
+		if (!retval)
+			clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+		return retval;
+	case MTNOP:
+		idetape_discard_read_pipeline(drive, 0);
+		return idetape_flush_tape_buffers(drive);
+	case MTRETEN:
+		idetape_discard_read_pipeline(drive, 0);
+		idetape_create_load_unload_cmd(drive, &pc,
+			IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
+		return idetape_queue_pc_tail(drive, &pc);
+	case MTEOM:
+		idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
+		return idetape_queue_pc_tail(drive, &pc);
+	case MTERASE:
+		(void)idetape_rewind_tape(drive);
+		idetape_create_erase_cmd(&pc);
+		return idetape_queue_pc_tail(drive, &pc);
+	case MTSETBLK:
+		if (mt_count) {
+			if (mt_count < tape->blk_size ||
+			    mt_count % tape->blk_size)
 				return -EIO;
+			tape->user_bs_factor = mt_count / tape->blk_size;
+			clear_bit(IDETAPE_DETECT_BS, &tape->flags);
+		} else
+			set_bit(IDETAPE_DETECT_BS, &tape->flags);
+		return 0;
+	case MTSEEK:
+		idetape_discard_read_pipeline(drive, 0);
+		return idetape_position_tape(drive,
+			mt_count * tape->user_bs_factor, tape->partition, 0);
+	case MTSETPART:
+		idetape_discard_read_pipeline(drive, 0);
+		return idetape_position_tape(drive, 0, mt_count, 0);
+	case MTFSR:
+	case MTBSR:
+	case MTLOCK:
+		if (!idetape_create_prevent_cmd(drive, &pc, 1))
 			return 0;
-		case MTLOAD:
-			idetape_discard_read_pipeline(drive, 0);
-			idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK);
-			return (idetape_queue_pc_tail(drive, &pc));
-		case MTUNLOAD:
-		case MTOFFL:
-			/*
-			 * If door is locked, attempt to unlock before
-			 * attempting to eject.
-			 */
-			if (tape->door_locked) {
-				if (idetape_create_prevent_cmd(drive, &pc, 0))
-					if (!idetape_queue_pc_tail(drive, &pc))
-						tape->door_locked = DOOR_UNLOCKED;
-			}
-			idetape_discard_read_pipeline(drive, 0);
-			idetape_create_load_unload_cmd(drive, &pc,!IDETAPE_LU_LOAD_MASK);
-			retval = idetape_queue_pc_tail(drive, &pc);
-			if (!retval)
-				clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+		retval = idetape_queue_pc_tail(drive, &pc);
+		if (retval)
 			return retval;
-		case MTNOP:
-			idetape_discard_read_pipeline(drive, 0);
-			return (idetape_flush_tape_buffers(drive));
-		case MTRETEN:
-			idetape_discard_read_pipeline(drive, 0);
-			idetape_create_load_unload_cmd(drive, &pc,IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
-			return (idetape_queue_pc_tail(drive, &pc));
-		case MTEOM:
-			idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
-			return (idetape_queue_pc_tail(drive, &pc));
-		case MTERASE:
-			(void) idetape_rewind_tape(drive);
-			idetape_create_erase_cmd(&pc);
-			return (idetape_queue_pc_tail(drive, &pc));
-		case MTSETBLK:
-			if (mt_count) {
-				if (mt_count < tape->blk_size ||
-				    mt_count % tape->blk_size)
-					return -EIO;
-				tape->user_bs_factor = mt_count /
-							tape->blk_size;
-				clear_bit(IDETAPE_DETECT_BS, &tape->flags);
-			} else
-				set_bit(IDETAPE_DETECT_BS, &tape->flags);
-			return 0;
-		case MTSEEK:
-			idetape_discard_read_pipeline(drive, 0);
-			return idetape_position_tape(drive, mt_count * tape->user_bs_factor, tape->partition, 0);
-		case MTSETPART:
-			idetape_discard_read_pipeline(drive, 0);
-			return (idetape_position_tape(drive, 0, mt_count, 0));
-		case MTFSR:
-		case MTBSR:
-		case MTLOCK:
-			if (!idetape_create_prevent_cmd(drive, &pc, 1))
-				return 0;
-			retval = idetape_queue_pc_tail(drive, &pc);
-			if (retval) return retval;
-			tape->door_locked = DOOR_EXPLICITLY_LOCKED;
-			return 0;
-		case MTUNLOCK:
-			if (!idetape_create_prevent_cmd(drive, &pc, 0))
-				return 0;
-			retval = idetape_queue_pc_tail(drive, &pc);
-			if (retval) return retval;
-			tape->door_locked = DOOR_UNLOCKED;
+		tape->door_locked = DOOR_EXPLICITLY_LOCKED;
+		return 0;
+	case MTUNLOCK:
+		if (!idetape_create_prevent_cmd(drive, &pc, 0))
 			return 0;
-		default:
-			printk(KERN_ERR "ide-tape: MTIO operation %d not "
-				"supported\n", mt_op);
-			return (-EIO);
+		retval = idetape_queue_pc_tail(drive, &pc);
+		if (retval)
+			return retval;
+		tape->door_locked = DOOR_UNLOCKED;
+		return 0;
+	default:
+		printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",
+				mt_op);
+		return -EIO;
 	}
 }
 
@@ -3042,37 +3141,38 @@ static int idetape_chrdev_ioctl(struct i
 	if (cmd == MTIOCGET || cmd == MTIOCPOS) {
 		block_offset = idetape_pipeline_size(drive) /
 			(tape->blk_size * tape->user_bs_factor);
-		if ((position = idetape_read_position(drive)) < 0)
+		position = idetape_read_position(drive);
+		if (position < 0)
 			return -EIO;
 	}
 	switch (cmd) {
-		case MTIOCTOP:
-			if (copy_from_user(&mtop, argp, sizeof (struct mtop)))
-				return -EFAULT;
-			return (idetape_mtioctop(drive,mtop.mt_op,mtop.mt_count));
-		case MTIOCGET:
-			memset(&mtget, 0, sizeof (struct mtget));
-			mtget.mt_type = MT_ISSCSI2;
-			mtget.mt_blkno = position / tape->user_bs_factor - block_offset;
-			mtget.mt_dsreg =
-				((tape->blk_size * tape->user_bs_factor)
-				 << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK;
+	case MTIOCTOP:
+		if (copy_from_user(&mtop, argp, sizeof(struct mtop)))
+			return -EFAULT;
+		return idetape_mtioctop(drive, mtop.mt_op, mtop.mt_count);
+	case MTIOCGET:
+		memset(&mtget, 0, sizeof(struct mtget));
+		mtget.mt_type = MT_ISSCSI2;
+		mtget.mt_blkno = position / tape->user_bs_factor - block_offset;
+		mtget.mt_dsreg =
+			((tape->blk_size * tape->user_bs_factor)
+			 << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK;
 
-			if (tape->drv_write_prot) {
-				mtget.mt_gstat |= GMT_WR_PROT(0xffffffff);
-			}
-			if (copy_to_user(argp, &mtget, sizeof(struct mtget)))
-				return -EFAULT;
-			return 0;
-		case MTIOCPOS:
-			mtpos.mt_blkno = position / tape->user_bs_factor - block_offset;
-			if (copy_to_user(argp, &mtpos, sizeof(struct mtpos)))
-				return -EFAULT;
-			return 0;
-		default:
-			if (tape->chrdev_dir == IDETAPE_DIR_READ)
-				idetape_discard_read_pipeline(drive, 1);
-			return idetape_blkdev_ioctl(drive, cmd, arg);
+		if (tape->drv_write_prot)
+			mtget.mt_gstat |= GMT_WR_PROT(0xffffffff);
+
+		if (copy_to_user(argp, &mtget, sizeof(struct mtget)))
+			return -EFAULT;
+		return 0;
+	case MTIOCPOS:
+		mtpos.mt_blkno = position / tape->user_bs_factor - block_offset;
+		if (copy_to_user(argp, &mtpos, sizeof(struct mtpos)))
+			return -EFAULT;
+		return 0;
+	default:
+		if (tape->chrdev_dir == IDETAPE_DIR_READ)
+			idetape_discard_read_pipeline(drive, 1);
+		return idetape_blkdev_ioctl(drive, cmd, arg);
 	}
 }
 
@@ -3101,7 +3201,7 @@ static void ide_tape_get_bsize_from_bdes
 	tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7;
 }
 
-static int idetape_chrdev_open (struct inode *inode, struct file *filp)
+static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 {
 	unsigned int minor = iminor(inode), i = minor & ~0xc0;
 	ide_drive_t *drive;
@@ -3185,7 +3285,7 @@ out_put_tape:
 	return retval;
 }
 
-static void idetape_write_release (ide_drive_t *drive, unsigned int minor)
+static void idetape_write_release(ide_drive_t *drive, unsigned int minor)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
@@ -3202,7 +3302,7 @@ static void idetape_write_release (ide_d
 	idetape_flush_tape_buffers(drive);
 }
 
-static int idetape_chrdev_release (struct inode *inode, struct file *filp)
+static int idetape_chrdev_release(struct inode *inode, struct file *filp)
 {
 	struct ide_tape_obj *tape = ide_tape_f(filp);
 	ide_drive_t *drive = tape->drive;
@@ -3309,7 +3409,7 @@ static void idetape_get_inquiry_results(
  * Ask the tape about its various parameters. In particular, we will adjust our
  * data transfer buffer	size to the recommended value as returned by the tape.
  */
-static void idetape_get_mode_sense_results (ide_drive_t *drive)
+static void idetape_get_mode_sense_results(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	idetape_pc_t pc;
@@ -3356,17 +3456,24 @@ static void idetape_get_mode_sense_resul
 }
 
 #ifdef CONFIG_IDE_PROC_FS
-static void idetape_add_settings (ide_drive_t *drive)
+static void idetape_add_settings(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 
 	ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff,
 			1, 2, (u16 *)&tape->caps[16], NULL);
-	ide_add_setting(drive,	"pipeline_min",		SETTING_RW,	TYPE_INT,	1,			0xffff,			tape->stage_size / 1024,	1,		&tape->min_pipeline,			NULL);
-	ide_add_setting(drive,	"pipeline",		SETTING_RW,	TYPE_INT,	1,			0xffff,			tape->stage_size / 1024,	1,		&tape->max_stages,			NULL);
-	ide_add_setting(drive,	"pipeline_max",		SETTING_RW,	TYPE_INT,	1,			0xffff,			tape->stage_size / 1024,	1,		&tape->max_pipeline,			NULL);
-	ide_add_setting(drive,	"pipeline_used",	SETTING_READ,	TYPE_INT,	0,			0xffff,			tape->stage_size / 1024,	1,		&tape->nr_stages,			NULL);
-	ide_add_setting(drive,	"pipeline_pending",	SETTING_READ,	TYPE_INT,	0,			0xffff,			tape->stage_size / 1024,	1,		&tape->nr_pending_stages,		NULL);
+	ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff,
+			tape->stage_size / 1024, 1, &tape->min_pipeline, NULL);
+	ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff,
+			tape->stage_size / 1024, 1, &tape->max_stages, NULL);
+	ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1,	0xffff,
+			tape->stage_size / 1024, 1, &tape->max_pipeline, NULL);
+	ide_add_setting(drive, "pipeline_used",	SETTING_READ, TYPE_INT, 0,
+			0xffff,	tape->stage_size / 1024, 1, &tape->nr_stages,
+			NULL);
+	ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0,
+			0xffff, tape->stage_size / 1024, 1,
+			&tape->nr_pending_stages, NULL);
 	ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff,
 			1, 1, (u16 *)&tape->caps[14], NULL);
 	ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT,	0, 0xffff, 1,
@@ -3374,10 +3481,16 @@ static void idetape_add_settings (ide_dr
 	ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN,
 			IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq,
 			NULL);
-	ide_add_setting(drive,	"dsc_overlap",		SETTING_RW,	TYPE_BYTE,	0,			1,			1,				1,		&drive->dsc_overlap,			NULL);
-	ide_add_setting(drive,	"pipeline_head_speed_c",SETTING_READ,	TYPE_INT,	0,			0xffff,			1,				1,		&tape->controlled_pipeline_head_speed,	NULL);
-	ide_add_setting(drive,	"pipeline_head_speed_u",SETTING_READ,	TYPE_INT,	0,			0xffff,			1,				1,		&tape->uncontrolled_pipeline_head_speed,NULL);
-	ide_add_setting(drive,	"avg_speed",		SETTING_READ,	TYPE_INT,	0,			0xffff,			1,				1,		&tape->avg_speed,			NULL);
+	ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1,
+			1, &drive->dsc_overlap, NULL);
+	ide_add_setting(drive, "pipeline_head_speed_c", SETTING_READ, TYPE_INT,
+			0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed,
+			NULL);
+	ide_add_setting(drive, "pipeline_head_speed_u", SETTING_READ, TYPE_INT,
+			0, 0xffff, 1, 1,
+			&tape->uncontrolled_pipeline_head_speed, NULL);
+	ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff,
+			1, 1, &tape->avg_speed, NULL);
 	ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1,
 			1, &tape->debug_mask, NULL);
 }
@@ -3396,7 +3509,7 @@ static inline void idetape_add_settings(
  * Note that at this point ide.c already assigned us an irq, so that we can
  * queue requests here and wait for their completion.
  */
-static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
+static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 {
 	unsigned long t1, tmid, tn, t;
 	int speed;
@@ -3429,7 +3542,9 @@ static void idetape_setup (ide_drive_t *
 	if (((gcw[0] & 0x60) >> 5) == 1)
 		set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags);
 
-	tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10;
+	tape->min_pipeline = 10;
+	tape->max_pipeline = 10;
+	tape->max_stages   = 10;
 
 	idetape_get_inquiry_results(drive);
 	idetape_get_mode_sense_results(drive);
@@ -3455,13 +3570,20 @@ static void idetape_setup (ide_drive_t *
 
 	/* Limit memory use for pipeline to 10% of physical memory */
 	si_meminfo(&si);
-	if (tape->max_stages * tape->stage_size > si.totalram * si.mem_unit / 10)
-		tape->max_stages = si.totalram * si.mem_unit / (10 * tape->stage_size);
+	if (tape->max_stages * tape->stage_size >
+			si.totalram * si.mem_unit / 10)
+		tape->max_stages =
+			si.totalram * si.mem_unit / (10 * tape->stage_size);
+
 	tape->max_stages   = min(tape->max_stages, IDETAPE_MAX_PIPELINE_STAGES);
 	tape->min_pipeline = min(tape->max_stages, IDETAPE_MIN_PIPELINE_STAGES);
-	tape->max_pipeline = min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES);
-	if (tape->max_stages == 0)
-		tape->max_stages = tape->min_pipeline = tape->max_pipeline = 1;
+	tape->max_pipeline =
+		min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES);
+	if (tape->max_stages == 0) {
+		tape->max_stages   = 1;
+		tape->min_pipeline = 1;
+		tape->max_pipeline = 1;
+	}
 
 	t1 = (tape->stage_size * HZ) / (speed * 1000);
 	tmid = (*(u16 *)&tape->caps[16] * 32 * HZ) / (speed * 125);
@@ -3513,7 +3635,8 @@ static void ide_tape_release(struct kref
 	drive->dsc_overlap = 0;
 	drive->driver_data = NULL;
 	device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor));
-	device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor + 128));
+	device_destroy(idetape_sysfs_class,
+			MKDEV(IDETAPE_MAJOR, tape->minor + 128));
 	idetape_devs[tape->minor] = NULL;
 	g->private_data = NULL;
 	put_disk(g);
@@ -3577,7 +3700,8 @@ static int idetape_open(struct inode *in
 	struct gendisk *disk = inode->i_bdev->bd_disk;
 	struct ide_tape_obj *tape;
 
-	if (!(tape = ide_tape_get(disk)))
+	tape = ide_tape_get(disk);
+	if (!tape)
 		return -ENXIO;
 
 	return 0;
@@ -3624,17 +3748,20 @@ static int ide_tape_probe(ide_drive_t *d
 		goto failed;
 	if (drive->media != ide_tape)
 		goto failed;
-	if (!idetape_identify_device (drive)) {
-		printk(KERN_ERR "ide-tape: %s: not supported by this version of ide-tape\n", drive->name);
+	if (!idetape_identify_device(drive)) {
+		printk(KERN_ERR "ide-tape: %s: not supported by this version of"
+				" the driver\n", drive->name);
 		goto failed;
 	}
 	if (drive->scsi) {
-		printk("ide-tape: passing drive %s to ide-scsi emulation.\n", drive->name);
+		printk(KERN_INFO "ide-tape: passing drive %s to ide-scsi"
+				 " emulation.\n", drive->name);
 		goto failed;
 	}
-	tape = kzalloc(sizeof (idetape_tape_t), GFP_KERNEL);
+	tape = kzalloc(sizeof(idetape_tape_t), GFP_KERNEL);
 	if (tape == NULL) {
-		printk(KERN_ERR "ide-tape: %s: Can't allocate a tape structure\n", drive->name);
+		printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n",
+				drive->name);
 		goto failed;
 	}
 
@@ -3680,7 +3807,7 @@ failed:
 	return -ENODEV;
 }
 
-static void __exit idetape_exit (void)
+static void __exit idetape_exit(void)
 {
 	driver_unregister(&idetape_driver.gen_driver);
 	class_destroy(idetape_sysfs_class);
@@ -3699,7 +3826,8 @@ static int __init idetape_init(void)
 	}
 
 	if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) {
-		printk(KERN_ERR "ide-tape: Failed to register character device interface\n");
+		printk(KERN_ERR "ide-tape: Failed to register chrdev"
+				" interface\n");
 		error = -EBUSY;
 		goto out_free_class;
 	}

[PATCH 21/22] ide-tape: bump minor driver version

[Borislav Petkov]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 5c88885..2e6198f 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -15,7 +15,7 @@
  * Documentation/ide/ChangeLog.ide-tape.1995-2002
  */
 
-#define IDETAPE_VERSION "1.19"
+#define IDETAPE_VERSION "1.20"
 
 #include <linux/module.h>
 #include <linux/types.h>
-- 
1.5.3.7

[PATCH 22/22] ide-tape: schedule driver for removal after 6 months in case it turns out

[Borislav Petkov]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 Documentation/feature-removal-schedule.txt |   14 ++++++++++++--
 drivers/ide/ide-tape.c                     |    5 +++++
 2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index a7d9d17..147bb63 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -264,8 +264,6 @@ Who:	Thomas Gleixner <tglx@linutronix.de>
 
 ---------------------------
 
----------------------------
-
 What:	i2c-i810, i2c-prosavage and i2c-savage4
 When:	May 2008
 Why:	These drivers are superseded by i810fb, intelfb and savagefb.
@@ -338,3 +336,15 @@ Why:	The support code for the old firmware hurts code readability/maintainabilit
 	and slightly hurts runtime performance. Bugfixes for the old firmware
 	are not provided by Broadcom anymore.
 Who:	Michael Buesch <mb@bu3sch.de>
+
+---------------------------
+
+What:	ide-tape driver
+When:	July 2008
+Files:	drivers/ide/ide-tape.c
+Why:	This driver might not have any users anymore and maintaining it for no
+	reason is an effort no one wants to make.
+Who:	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>, Borislav Petkov
+	<petkovbb@googlemail.com>
+
+---------------------------
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 2e6198f..86f206b 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -3803,6 +3803,11 @@ static int ide_tape_probe(ide_drive_t *drive)
 	g->fops = &idetape_block_ops;
 	ide_register_region(g);
 
+	printk(KERN_WARNING "It is possible that this driver does not have any"
+		" users anymore and, as a result, it will be REMOVED soon."
+		" Please notify Bart <bzolnier@gmail.com> or Boris"
+		" <petkovbb@gmail.com> in case you still need it.\n");
+
 	return 0;
 
 out_free_tape:
-- 
1.5.3.7

ide-tape redux (was: Re:)

[Bartlomiej Zolnierkiewicz]

Hi Borislav,

On Monday 04 February 2008, Borislav Petkov wrote:
> Hi Bart,
> 
> here are the pending ide-tape patches reworked which incorporate all review
> points raised so far. Several new patches are appended to the original series
> which i thought would be reasonable to sumbit along with the others. Also,
> i've applied "ide-tape: dump gcw fields on error in idetape_identify_device()"
> which is #12 and which you can simply ignore. Furthermore, #32 from the original
> series got split up into the different logical changes it dealt with, as you
> requested.

Thanks!  [ Reviewing was so much easier. ]

>  Documentation/feature-removal-schedule.txt |   14 +-
>  drivers/ide/ide-tape.c                     | 2764 +++++++++++++---------------
>  2 files changed, 1325 insertions(+), 1453 deletions(-)

applied #1-7, #9-10, #13-22 (+queued all of them for 2.6.25)

w.r.t. #8 I'm waiting for Jens to comment on blk_{get,put}_request() approach

w.r.t. #11 ide-tape uses char devices and supports DSC so it is not as obvious
as in ide-floppy case that all atomic bitops can be just removed (extra audit
and some time -mm are required) so please resync/resubmit

#12 is already in Linus' tree

Bart

Re: ide-tape redux (was: Re:)

[Borislav Petkov]

On Tue, Feb 05, 2008 at 02:20:22AM +0100, Bartlomiej Zolnierkiewicz wrote:

[...]

> w.r.t. #11 ide-tape uses char devices and supports DSC so it is not as obvious
> as in ide-floppy case that all atomic bitops can be just removed (extra audit
> and some time -mm are required) so please resync/resubmit

Ok, here's what i think we should do here: There are two flags that handle DSC:
PC_FL_WAIT_FOR_DSC and IDETAPE_FL_IGNORE_DSC. The first one is per pc and is set in
all the packet command init functions ..create_bla_cmd() after their callers have
created a pc on the stack and reached its ptr down for initialization. This case
is carefree since the bit will be tested first in the interrupt handler and this
happens only after the pc is queued (ide_do_drive_cmd()) into the request buffer.

The other flag, IDETAPE_FL_IGNORE_DSC, is polled for in the request handler and
can be set when a pc is being retried and we should leave only those atomic
tests intact, imho, but i'm definitely gonna need a second opinion here.

---

commit 1ed8ae92249d5dff7af4ee88710ea08ff3f3356f
Author: Borislav Petkov <petkovbb@gmail.com>
Date:   Tue Feb 5 08:05:35 2008 +0100

    ide-tape: remove atomic test/set macros
    
    Also, since the driver supports DSC, leave the atomic tests
    for the IDETAPE_FL_IGNORE_DSC bit untouched because this is polled
    for in the request handler and can be set in the interrupt
    handler through idetape_retry_pc() after enabling interrupts.
    
    Finally, remove flag IDETAPE_READ_ERROR since it is unused.
    
    Signed-off-by: Borislav Petkov <petkovbb@gmail.com>

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index e59e49e..9455ce4 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -206,24 +206,24 @@ typedef struct idetape_packet_command_s {
 	/* Temporary buffer */
 	u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE];
 	/* Status/Action bit flags: long for set_bit */
-	unsigned long flags;
+	unsigned int flags;
 } idetape_pc_t;
 
-/*
- *	Packet command flag bits.
- */
-/* Set when an error is considered normal - We won't retry */
-#define	PC_ABORT			0
-/* 1 When polling for DSC on a media access command */
-#define PC_WAIT_FOR_DSC			1
-/* 1 when we prefer to use DMA if possible */
-#define PC_DMA_RECOMMENDED		2
-/* 1 while DMA in progress */
-#define	PC_DMA_IN_PROGRESS		3
-/* 1 when encountered problem during DMA */
-#define	PC_DMA_ERROR			4
-/* Data direction */
-#define	PC_WRITING			5
+/* Packet command flag bits. */
+enum {
+	/* Set when an error is considered normal - We won't retry */
+	PC_FL_ABORT		= (1 << 0),
+	/* 1 When polling for DSC on a media access command */
+	PC_FL_WAIT_FOR_DSC	= (1 << 1),
+	/* 1 when we prefer to use DMA if possible */
+	PC_FL_DMA_RECOMMENDED	= (1 << 2),
+	/* 1 while DMA in progress */
+	PC_FL_DMA_IN_PROGRESS	= (1 << 3),
+	/* 1 when encountered problem during DMA */
+	PC_FL_DMA_ERROR		= (1 << 4),
+	/* Data direction */
+	PC_FL_WRITING		= (1 <<	5),
+};
 
 /* A pipeline stage. */
 typedef struct idetape_stage_s {
@@ -357,8 +357,7 @@ typedef struct ide_tape_obj {
 	/* Wasted space in each stage */
 	int excess_bh_size;
 
-	/* Status/Action flags: long for set_bit */
-	unsigned long flags;
+	unsigned int flags;
 	/* protects the ide-tape queue */
 	spinlock_t lock;
 
@@ -451,20 +450,26 @@ static void ide_tape_put(struct ide_tape_obj *tape)
 #define DOOR_LOCKED			1
 #define DOOR_EXPLICITLY_LOCKED		2
 
-/*
- *	Tape flag bits values.
- */
-#define IDETAPE_IGNORE_DSC		0
-#define IDETAPE_ADDRESS_VALID		1	/* 0 When the tape position is unknown */
-#define IDETAPE_BUSY			2	/* Device already opened */
-#define IDETAPE_PIPELINE_ERROR		3	/* Error detected in a pipeline stage */
-#define IDETAPE_DETECT_BS		4	/* Attempt to auto-detect the current user block size */
-#define IDETAPE_FILEMARK		5	/* Currently on a filemark */
-#define IDETAPE_DRQ_INTERRUPT		6	/* DRQ interrupt device */
-#define IDETAPE_READ_ERROR		7
-#define IDETAPE_PIPELINE_ACTIVE		8	/* pipeline active */
-/* 0 = no tape is loaded, so we don't rewind after ejecting */
-#define IDETAPE_MEDIUM_PRESENT		9
+/* Tape flag bits values. */
+enum {
+	IDETAPE_FL_IGNORE_DSC		= (1 << 0),
+	/* 0 When the tape position is unknown */
+	IDETAPE_FL_ADDRESS_VALID	= (1 <<	1),
+	/* Device already opened */
+	IDETAPE_FL_BUSY			= (1 << 2),
+	/* Error detected in a pipeline stage */
+	IDETAPE_FL_PIPELINE_ERR	= (1 <<	3),
+	/* Attempt to auto-detect the current user block size */
+	IDETAPE_FL_DETECT_BS		= (1 << 4),
+	/* Currently on a filemark */
+	IDETAPE_FL_FILEMARK		= (1 << 5),
+	/* DRQ interrupt device */
+	IDETAPE_FL_DRQ_INTERRUPT	= (1 << 6),
+	/* pipeline active */
+	IDETAPE_FL_PIPELINE_ACTIVE	= (1 << 7),
+	/* 0 = no tape is loaded, so we don't rewind after ejecting */
+	IDETAPE_FL_MEDIUM_PRESENT	= (1 << 8),
+};
 
 /* A define for the READ BUFFER command */
 #define IDETAPE_RETRIEVE_FAULTY_BLOCK	6
@@ -595,7 +600,7 @@ static void idetape_update_buffers(idetape_pc_t *pc)
 	int count;
 	unsigned int bcount = pc->actually_transferred;
 
-	if (test_bit(PC_WRITING, &pc->flags))
+	if (pc->flags & PC_FL_WRITING)
 		return;
 	while (bcount) {
 		if (bh == NULL) {
@@ -681,8 +686,8 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 	debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n",
 		 pc->c[0], tape->sense_key, tape->asc, tape->ascq);
 
-	/* Correct pc->actually_transferred by asking the tape.	 */
-	if (test_bit(PC_DMA_ERROR, &pc->flags)) {
+	/* Correct pc->actually_transferred by asking the tape. */
+	if (pc->flags & PC_FL_DMA_ERROR) {
 		pc->actually_transferred = pc->request_transfer -
 			tape->blk_size *
 			be32_to_cpu(get_unaligned((u32 *)&sense[3]));
@@ -701,27 +706,26 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 			/* don't report an error, everything's ok */
 			pc->error = 0;
 			/* don't retry read/write */
-			set_bit(PC_ABORT, &pc->flags);
+			pc->flags |= PC_FL_ABORT;
 		}
 	}
 	if (pc->c[0] == READ_6 && (sense[2] & 0x80)) {
 		pc->error = IDETAPE_ERROR_FILEMARK;
-		set_bit(PC_ABORT, &pc->flags);
+		pc->flags |= PC_FL_ABORT;
 	}
 	if (pc->c[0] == WRITE_6) {
 		if ((sense[2] & 0x40) || (tape->sense_key == 0xd
 		     && tape->asc == 0x0 && tape->ascq == 0x2)) {
 			pc->error = IDETAPE_ERROR_EOD;
-			set_bit(PC_ABORT, &pc->flags);
+			pc->flags |= PC_FL_ABORT;
 		}
 	}
 	if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
 		if (tape->sense_key == 8) {
 			pc->error = IDETAPE_ERROR_EOD;
-			set_bit(PC_ABORT, &pc->flags);
+			pc->flags |= PC_FL_ABORT;
 		}
-		if (!test_bit(PC_ABORT, &pc->flags) &&
-		    pc->actually_transferred)
+		if (!(pc->flags & PC_FL_ABORT) && pc->actually_transferred)
 			pc->retries = IDETAPE_MAX_PC_RETRIES + 1;
 	}
 }
@@ -876,14 +880,14 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 		if (rq->cmd[0] & REQ_IDETAPE_WRITE) {
 			remove_stage = 1;
 			if (error) {
-				set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+				tape->flags |= IDETAPE_FL_PIPELINE_ERR;
 				if (error == IDETAPE_ERROR_EOD)
 					idetape_abort_pipeline(drive,
 								active_stage);
 			}
 		} else if (rq->cmd[0] & REQ_IDETAPE_READ) {
 			if (error == IDETAPE_ERROR_EOD) {
-				set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+				tape->flags |= IDETAPE_FL_PIPELINE_ERR;
 				idetape_abort_pipeline(drive, active_stage);
 			}
 		}
@@ -916,7 +920,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 	if (remove_stage)
 		idetape_remove_stage_head(drive);
 	if (tape->active_data_rq == NULL)
-		clear_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+		tape->flags &= ~IDETAPE_FL_PIPELINE_ACTIVE;
 	spin_unlock_irqrestore(&tape->lock, flags);
 	return 0;
 }
@@ -995,7 +999,7 @@ static ide_startstop_t idetape_retry_pc (ide_drive_t *drive)
 	pc = idetape_next_pc_storage(drive);
 	rq = idetape_next_rq_storage(drive);
 	idetape_create_request_sense_cmd(pc);
-	set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+	set_bit(IDETAPE_FL_IGNORE_DSC, &tape->flags);
 	idetape_queue_pc_head(drive, pc, rq);
 	return ide_stopped;
 }
@@ -1042,7 +1046,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 	/* Clear the interrupt */
 	stat = ide_read_status(drive);
 
-	if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+	if (pc->flags & PC_FL_DMA_IN_PROGRESS) {
 		if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) {
 			/*
 			 * A DMA error is sometimes expected. For example,
@@ -1065,7 +1069,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 			 * data transfer will occur, but no DMA error.
 			 * (AS, 19 Apr 2001)
 			 */
-			set_bit(PC_DMA_ERROR, &pc->flags);
+			pc->flags |= PC_FL_DMA_ERROR;
 		} else {
 			pc->actually_transferred = pc->request_transfer;
 			idetape_update_buffers(pc);
@@ -1079,7 +1083,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 		debug_log(DBG_SENSE, "Packet command completed, %d bytes"
 				" transferred\n", pc->actually_transferred);
 
-		clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
+		pc->flags &= ~PC_FL_DMA_IN_PROGRESS;
 		local_irq_enable();
 
 #if SIMULATE_ERRORS
@@ -1092,7 +1096,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 #endif
 		if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE)
 			stat &= ~ERR_STAT;
-		if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
+		if ((stat & ERR_STAT) || (pc->flags & PC_FL_DMA_ERROR)) {
 			/* Error detected */
 			debug_log(DBG_ERR, "%s: I/O error\n", tape->name);
 
@@ -1108,8 +1112,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 			return idetape_retry_pc(drive);
 		}
 		pc->error = 0;
-		if (test_bit(PC_WAIT_FOR_DSC, &pc->flags) &&
-		    (stat & SEEK_STAT) == 0) {
+		if ((pc->flags & PC_FL_WAIT_FOR_DSC) &&
+				(stat & SEEK_STAT) == 0) {
 			/* Media access command */
 			tape->dsc_polling_start = jiffies;
 			tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST;
@@ -1123,7 +1127,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 		/* Command finished - Call the callback function */
 		return pc->callback(drive);
 	}
-	if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+	if (pc->flags & PC_FL_DMA_IN_PROGRESS) {
+		pc->flags &= ~PC_FL_DMA_IN_PROGRESS;
 		printk(KERN_ERR "ide-tape: The tape wants to issue more "
 				"interrupts in DMA mode\n");
 		printk(KERN_ERR "ide-tape: DMA disabled, reverting to PIO\n");
@@ -1140,7 +1145,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 		printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__);
 		return ide_do_reset(drive);
 	}
-	if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) {
+	if (((ireason & IO) == IO) == !!(pc->flags & PC_FL_WRITING)) {
 		/* Hopefully, we will never get here */
 		printk(KERN_ERR "ide-tape: We wanted to %s, ",
 				(ireason & IO) ? "Write" : "Read");
@@ -1148,7 +1153,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 				(ireason & IO) ? "Read" : "Write");
 		return ide_do_reset(drive);
 	}
-	if (!test_bit(PC_WRITING, &pc->flags)) {
+	if (!(pc->flags & PC_FL_WRITING)) {
 		/* Reading - Check that we have enough space */
 		temp = pc->actually_transferred + bcount;
 		if (temp > pc->request_transfer) {
@@ -1260,7 +1265,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
 	ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
 #ifdef CONFIG_BLK_DEV_IDEDMA
 	/* Begin DMA, if necessary */
-	if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags))
+	if (pc->flags & PC_FL_DMA_IN_PROGRESS)
 		hwif->dma_start(drive);
 #endif
 	/* Send the actual packet */
@@ -1286,14 +1291,13 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
 	/* Set the current packet command */
 	tape->pc = pc;
 
-	if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
-	    test_bit(PC_ABORT, &pc->flags)) {
+	if (pc->retries > IDETAPE_MAX_PC_RETRIES || (pc->flags & PC_FL_ABORT)) {
 		/*
 		 * We will "abort" retrying a packet command in case legitimate
 		 * error code was received (crossing a filemark, or end of the
 		 * media, for example).
 		 */
-		if (!test_bit(PC_ABORT, &pc->flags)) {
+		if (!(pc->flags & PC_FL_ABORT)) {
 			if (!(pc->c[0] == TEST_UNIT_READY &&
 			      tape->sense_key == 2 && tape->asc == 4 &&
 			     (tape->ascq == 1 || tape->ascq == 8))) {
@@ -1319,20 +1323,21 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
 	/* Request to transfer the entire buffer at once */
 	bcount = pc->request_transfer;
 
-	if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) {
+	if (pc->flags & PC_FL_DMA_ERROR) {
+		pc->flags &= ~PC_FL_DMA_ERROR;
 		printk(KERN_WARNING "ide-tape: DMA disabled, "
 				"reverting to PIO\n");
 		ide_dma_off(drive);
 	}
-	if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
+	if ((pc->flags & PC_FL_DMA_RECOMMENDED) && drive->using_dma)
 		dma_ok = !hwif->dma_setup(drive);
 
 	ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
 			   IDE_TFLAG_OUT_DEVICE, bcount, dma_ok);
 
 	if (dma_ok)			/* Will begin DMA later */
-		set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
-	if (test_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags)) {
+		pc->flags |= PC_FL_DMA_IN_PROGRESS;
+	if (tape->flags & IDETAPE_FL_DRQ_INTERRUPT) {
 		ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc,
 				    IDETAPE_WAIT_CMD, NULL);
 		return ide_started;
@@ -1520,7 +1525,7 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
 	pc->buffer_size = length * tape->blk_size;
 	pc->request_transfer = pc->buffer_size;
 	if (pc->request_transfer == tape->stage_size)
-		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+		pc->flags |= PC_FL_DMA_RECOMMENDED;
 }
 
 static void idetape_create_read_buffer_cmd(idetape_tape_t *tape,
@@ -1554,7 +1559,7 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
 	pc->c[1] = 1;
 	pc->callback = &idetape_rw_callback;
-	set_bit(PC_WRITING, &pc->flags);
+	pc->flags |= PC_FL_WRITING;
 	pc->bh = bh;
 	pc->b_data = bh->b_data;
 	pc->b_count = atomic_read(&bh->b_count);
@@ -1562,7 +1567,7 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
 	pc->buffer_size = length * tape->blk_size;
 	pc->request_transfer = pc->buffer_size;
 	if (pc->request_transfer == tape->stage_size)
-		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+		pc->flags |= PC_FL_DMA_RECOMMENDED;
 }
 
 static ide_startstop_t idetape_do_request(ide_drive_t *drive,
@@ -1606,10 +1611,10 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	stat = ide_read_status(drive);
 
 	if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2))
-		set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+		set_bit(IDETAPE_FL_IGNORE_DSC, &tape->flags);
 
 	if (drive->post_reset == 1) {
-		set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+		set_bit(IDETAPE_FL_IGNORE_DSC, &tape->flags);
 		drive->post_reset = 0;
 	}
 
@@ -1617,7 +1622,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 		tape->insert_speed = tape->insert_size / 1024 * HZ /
 					(jiffies - tape->insert_time);
 	idetape_calculate_speeds(drive);
-	if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) &&
+	if (!test_and_clear_bit(IDETAPE_FL_IGNORE_DSC, &tape->flags) &&
 	    (stat & SEEK_STAT) == 0) {
 		if (postponed_rq == NULL) {
 			tape->dsc_polling_start = jiffies;
@@ -1682,7 +1687,7 @@ static inline int idetape_pipeline_active(idetape_tape_t *tape)
 {
 	int rc1, rc2;
 
-	rc1 = test_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+	rc1 = !!(tape->flags & IDETAPE_FL_PIPELINE_ACTIVE);
 	rc2 = (tape->active_data_rq != NULL);
 	return rc1;
 }
@@ -1928,7 +1933,7 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
 		if (readpos[0] & 0x4) {
 			printk(KERN_INFO "ide-tape: Block location is unknown"
 					 "to the tape\n");
-			clear_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
+			tape->flags &= ~IDETAPE_FL_ADDRESS_VALID;
 			idetape_end_request(drive, 0, 0);
 		} else {
 			debug_log(DBG_SENSE, "Block Location - %u\n",
@@ -1937,7 +1942,7 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
 			tape->partition = readpos[1];
 			tape->first_frame =
 				be32_to_cpu(*(u32 *)&readpos[4]);
-			set_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
+			tape->flags |= IDETAPE_FL_ADDRESS_VALID;
 			idetape_end_request(drive, 1, 0);
 		}
 	} else {
@@ -1956,7 +1961,7 @@ static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
 	idetape_init_pc(pc);
 	pc->c[0] = WRITE_FILEMARKS;
 	pc->c[4] = write_filemark;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -1997,7 +2002,7 @@ static void idetape_create_load_unload_cmd(ide_drive_t *drive, idetape_pc_t *pc,
 	idetape_init_pc(pc);
 	pc->c[0] = START_STOP;
 	pc->c[4] = cmd;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2008,7 +2013,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
 	int load_attempted = 0;
 
 	/* Wait for the tape to become ready */
-	set_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+	tape->flags |= IDETAPE_FL_MEDIUM_PRESENT;
 	timeout += jiffies;
 	while (time_before(jiffies, timeout)) {
 		idetape_create_test_unit_ready_cmd(&pc);
@@ -2081,7 +2086,7 @@ static void idetape_create_locate_cmd(ide_drive_t *drive, idetape_pc_t *pc,
 	pc->c[1] = 2;
 	put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
 	pc->c[8] = partition;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2112,8 +2117,11 @@ static int __idetape_discard_read_pipeline(ide_drive_t *drive)
 
 	/* Remove merge stage. */
 	cnt = tape->merge_stage_size / tape->blk_size;
-	if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags))
-		++cnt;		/* Filemarks count as 1 sector */
+	if (tape->flags & IDETAPE_FL_FILEMARK) {
+		tape->flags &= ~IDETAPE_FL_FILEMARK;
+		/* Filemarks count as 1 sector */
+		++cnt;
+	}
 	tape->merge_stage_size = 0;
 	if (tape->merge_stage != NULL) {
 		__idetape_kfree_stage(tape->merge_stage);
@@ -2121,7 +2129,7 @@ static int __idetape_discard_read_pipeline(ide_drive_t *drive)
 	}
 
 	/* Clear pipeline flags. */
-	clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+	tape->flags &= ~IDETAPE_FL_PIPELINE_ERR;
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
 
 	/* Remove pipeline stages. */
@@ -2235,7 +2243,7 @@ static void idetape_plug_pipeline(ide_drive_t *drive)
 	if (tape->next_stage == NULL)
 		return;
 	if (!idetape_pipeline_active(tape)) {
-		set_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+		tape->flags |= IDETAPE_FL_PIPELINE_ACTIVE;
 		idetape_activate_next_stage(drive);
 		(void) ide_do_drive_cmd(drive, tape->active_data_rq, ide_end);
 	}
@@ -2254,7 +2262,7 @@ static void idetape_create_rewind_cmd(ide_drive_t *drive, idetape_pc_t *pc)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = REZERO_UNIT;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2263,7 +2271,7 @@ static void idetape_create_erase_cmd(idetape_pc_t *pc)
 	idetape_init_pc(pc);
 	pc->c[0] = ERASE;
 	pc->c[1] = 1;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2273,7 +2281,7 @@ static void idetape_create_space_cmd(idetape_pc_t *pc, int count, u8 cmd)
 	pc->c[0] = SPACE;
 	put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
 	pc->c[1] = cmd;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FL_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2360,9 +2368,11 @@ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
 			idetape_plug_pipeline(drive);
 		}
 	}
-	if (test_and_clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
+	if (tape->flags & IDETAPE_FL_PIPELINE_ERR) {
+		tape->flags &= ~IDETAPE_FL_PIPELINE_ERR;
 		/* Return a deferred error */
 		return -EIO;
+	}
 	return blocks;
 }
 
@@ -2436,7 +2446,7 @@ static void idetape_empty_write_pipeline(ide_drive_t *drive)
 		__idetape_kfree_stage(tape->merge_stage);
 		tape->merge_stage = NULL;
 	}
-	clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+	tape->flags &= ~IDETAPE_FL_PIPELINE_ERR;
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
 
 	/*
@@ -2524,8 +2534,8 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
 	rq.sector = tape->first_frame;
 	rq.nr_sectors = blocks;
 	rq.current_nr_sectors = blocks;
-	if (!test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags) &&
-	    tape->nr_stages < max_stages) {
+	if (!(tape->flags & IDETAPE_FL_PIPELINE_ERR) &&
+			tape->nr_stages < max_stages) {
 		new_stage = idetape_kmalloc_stage(tape);
 		while (new_stage != NULL) {
 			new_stage->rq = rq;
@@ -2561,13 +2571,13 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
 	debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
 
 	/* If we are at a filemark, return a read length of 0 */
-	if (test_bit(IDETAPE_FILEMARK, &tape->flags))
+	if (tape->flags & IDETAPE_FL_FILEMARK)
 		return 0;
 
 	/* Wait for the next block to reach the head of the pipeline. */
 	idetape_init_read(drive, tape->max_stages);
 	if (tape->first_stage == NULL) {
-		if (test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
+		if (tape->flags & IDETAPE_FL_PIPELINE_ERR)
 			return 0;
 		return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
 					tape->merge_stage->bh);
@@ -2584,7 +2594,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
 	else {
 		idetape_switch_buffers(tape, tape->first_stage);
 		if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK)
-			set_bit(IDETAPE_FILEMARK, &tape->flags);
+			tape->flags |= IDETAPE_FL_FILEMARK;
 		spin_lock_irqsave(&tape->lock, flags);
 		idetape_remove_stage_head(drive);
 		spin_unlock_irqrestore(&tape->lock, flags);
@@ -2731,12 +2741,14 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
 	if (tape->chrdev_dir == IDETAPE_DIR_READ) {
 		/* its a read-ahead buffer, scan it for crossed filemarks. */
 		tape->merge_stage_size = 0;
-		if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags))
+		if (tape->flags & IDETAPE_FL_FILEMARK) {
+			tape->flags &= ~IDETAPE_FL_FILEMARK;
 			++count;
+		}
 		while (tape->first_stage != NULL) {
 			if (count == mt_count) {
 				if (mt_op == MTFSFM)
-					set_bit(IDETAPE_FILEMARK, &tape->flags);
+					tape->flags |= IDETAPE_FL_FILEMARK;
 				return 0;
 			}
 			spin_lock_irqsave(&tape->lock, flags);
@@ -2820,7 +2832,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
 	if (tape->chrdev_dir != IDETAPE_DIR_READ) {
-		if (test_bit(IDETAPE_DETECT_BS, &tape->flags))
+		if (tape->flags & IDETAPE_FL_DETECT_BS)
 			if (count > tape->blk_size &&
 			    (count % tape->blk_size) == 0)
 				tape->user_bs_factor = count / tape->blk_size;
@@ -2863,7 +2875,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 		tape->merge_stage_size = bytes_read-temp;
 	}
 finish:
-	if (!actually_read && test_bit(IDETAPE_FILEMARK, &tape->flags)) {
+	if (!actually_read && (tape->flags & IDETAPE_FL_FILEMARK)) {
 		debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
 
 		idetape_space_over_filemarks(drive, MTFSF, 1);
@@ -3056,7 +3068,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 					      !IDETAPE_LU_LOAD_MASK);
 		retval = idetape_queue_pc_tail(drive, &pc);
 		if (!retval)
-			clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+			tape->flags &= ~IDETAPE_FL_MEDIUM_PRESENT;
 		return retval;
 	case MTNOP:
 		idetape_discard_read_pipeline(drive, 0);
@@ -3079,9 +3091,9 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 			    mt_count % tape->blk_size)
 				return -EIO;
 			tape->user_bs_factor = mt_count / tape->blk_size;
-			clear_bit(IDETAPE_DETECT_BS, &tape->flags);
+			tape->flags &= ~IDETAPE_FL_DETECT_BS;
 		} else
-			set_bit(IDETAPE_DETECT_BS, &tape->flags);
+			tape->flags |= IDETAPE_FL_DETECT_BS;
 		return 0;
 	case MTSEEK:
 		idetape_discard_read_pipeline(drive, 0);
@@ -3207,7 +3219,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 	ide_drive_t *drive;
 	idetape_tape_t *tape;
 	idetape_pc_t pc;
-	int retval;
+	int retval, testval;
 
 	if (i >= MAX_HWIFS * MAX_DRIVES)
 		return -ENXIO;
@@ -3229,24 +3241,26 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 
 	filp->private_data = tape;
 
-	if (test_and_set_bit(IDETAPE_BUSY, &tape->flags)) {
+	testval = tape->flags & IDETAPE_FL_BUSY;
+	tape->flags |= IDETAPE_FL_BUSY;
+	if (testval) {
 		retval = -EBUSY;
 		goto out_put_tape;
 	}
 
 	retval = idetape_wait_ready(drive, 60 * HZ);
 	if (retval) {
-		clear_bit(IDETAPE_BUSY, &tape->flags);
+		tape->flags &= ~IDETAPE_FL_BUSY;
 		printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
 		goto out_put_tape;
 	}
 
 	idetape_read_position(drive);
-	if (!test_bit(IDETAPE_ADDRESS_VALID, &tape->flags))
+	if (!(tape->flags & IDETAPE_FL_ADDRESS_VALID))
 		(void)idetape_rewind_tape(drive);
 
 	if (tape->chrdev_dir != IDETAPE_DIR_READ)
-		clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+		tape->flags &= ~IDETAPE_FL_PIPELINE_ERR;
 
 	/* Read block size and write protect status from drive. */
 	ide_tape_get_bsize_from_bdesc(drive);
@@ -3261,7 +3275,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 	if (tape->write_prot) {
 		if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
 		    (filp->f_flags & O_ACCMODE) == O_RDWR) {
-			clear_bit(IDETAPE_BUSY, &tape->flags);
+			tape->flags &= ~IDETAPE_FL_BUSY;
 			retval = -EROFS;
 			goto out_put_tape;
 		}
@@ -3326,7 +3340,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
 		__idetape_kfree_stage(tape->cache_stage);
 		tape->cache_stage = NULL;
 	}
-	if (minor < 128 && test_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags))
+	if (minor < 128 && (tape->flags & IDETAPE_FL_MEDIUM_PRESENT))
 		(void) idetape_rewind_tape(drive);
 	if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
 		if (tape->door_locked == DOOR_LOCKED) {
@@ -3336,7 +3350,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
 			}
 		}
 	}
-	clear_bit(IDETAPE_BUSY, &tape->flags);
+	tape->flags &= ~IDETAPE_FL_BUSY;
 	ide_tape_put(tape);
 	unlock_kernel();
 	return 0;
@@ -3540,7 +3554,7 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 
 	/* Command packet DRQ type */
 	if (((gcw[0] & 0x60) >> 5) == 1)
-		set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags);
+		tape->flags |= IDETAPE_FL_DRQ_INTERRUPT;
 
 	tape->min_pipeline = 10;
 	tape->max_pipeline = 10;

-- 
Regards/Gruß,
    Boris.

Re: ide-tape redux (was: Re:)

[Borislav Petkov]

... and while we're at it ...

commit c824f79fe4040f7541d7e35c546bb57a22d2fe11
Author: Borislav Petkov <petkovbb@gmail.com>
Date:   Wed Feb 6 06:23:10 2008 +0100

    ide-tape: move all struct and other defs to the top
    
    Signed-off-by: Borislav Petkov <petkovbb@gmail.com>

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 9455ce4..398aea8 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -225,6 +225,69 @@ enum {
 	PC_FL_WRITING		= (1 <<	5),
 };
 
+/* Tape door status */
+#define DOOR_UNLOCKED			0
+#define DOOR_LOCKED			1
+#define DOOR_EXPLICITLY_LOCKED		2
+
+/* Tape flag bits values. */
+enum {
+	IDETAPE_FL_IGNORE_DSC		= (1 << 0),
+	/* 0 When the tape position is unknown */
+	IDETAPE_FL_ADDRESS_VALID	= (1 <<	1),
+	/* Device already opened */
+	IDETAPE_FL_BUSY			= (1 << 2),
+	/* Error detected in a pipeline stage */
+	IDETAPE_FL_PIPELINE_ERR	= (1 <<	3),
+	/* Attempt to auto-detect the current user block size */
+	IDETAPE_FL_DETECT_BS		= (1 << 4),
+	/* Currently on a filemark */
+	IDETAPE_FL_FILEMARK		= (1 << 5),
+	/* DRQ interrupt device */
+	IDETAPE_FL_DRQ_INTERRUPT	= (1 << 6),
+	/* pipeline active */
+	IDETAPE_FL_PIPELINE_ACTIVE	= (1 << 7),
+	/* 0 = no tape is loaded, so we don't rewind after ejecting */
+	IDETAPE_FL_MEDIUM_PRESENT	= (1 << 8),
+};
+
+/* A define for the READ BUFFER command */
+#define IDETAPE_RETRIEVE_FAULTY_BLOCK	6
+
+/* Some defines for the SPACE command */
+#define IDETAPE_SPACE_OVER_FILEMARK	1
+#define IDETAPE_SPACE_TO_EOD		3
+
+/* Some defines for the LOAD UNLOAD command */
+#define IDETAPE_LU_LOAD_MASK		1
+#define IDETAPE_LU_RETENSION_MASK	2
+#define IDETAPE_LU_EOT_MASK		4
+
+/*
+ * Special requests for our block device strategy routine.
+ *
+ * In order to service a character device command, we add special requests to
+ * the tail of our block device request queue and wait for their completion.
+ */
+
+enum {
+	REQ_IDETAPE_PC1		= (1 << 0), /* packet command (first stage) */
+	REQ_IDETAPE_PC2		= (1 << 1), /* packet command (second stage) */
+	REQ_IDETAPE_READ	= (1 << 2),
+	REQ_IDETAPE_WRITE	= (1 << 3),
+	REQ_IDETAPE_READ_BUFFER	= (1 << 4),
+};
+
+/* Error codes returned in rq->errors to the higher part of the driver. */
+#define	IDETAPE_ERROR_GENERAL		101
+#define	IDETAPE_ERROR_FILEMARK		102
+#define	IDETAPE_ERROR_EOD		103
+
+/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
+#define IDETAPE_BLOCK_DESCRIPTOR	0
+#define	IDETAPE_CAPABILITIES_PAGE	0x2a
+
+
 /* A pipeline stage. */
 typedef struct idetape_stage_s {
 	struct request rq;			/* The corresponding request */
@@ -445,68 +508,6 @@ static void ide_tape_put(struct ide_tape_obj *tape)
 	mutex_unlock(&idetape_ref_mutex);
 }
 
-/* Tape door status */
-#define DOOR_UNLOCKED			0
-#define DOOR_LOCKED			1
-#define DOOR_EXPLICITLY_LOCKED		2
-
-/* Tape flag bits values. */
-enum {
-	IDETAPE_FL_IGNORE_DSC		= (1 << 0),
-	/* 0 When the tape position is unknown */
-	IDETAPE_FL_ADDRESS_VALID	= (1 <<	1),
-	/* Device already opened */
-	IDETAPE_FL_BUSY			= (1 << 2),
-	/* Error detected in a pipeline stage */
-	IDETAPE_FL_PIPELINE_ERR	= (1 <<	3),
-	/* Attempt to auto-detect the current user block size */
-	IDETAPE_FL_DETECT_BS		= (1 << 4),
-	/* Currently on a filemark */
-	IDETAPE_FL_FILEMARK		= (1 << 5),
-	/* DRQ interrupt device */
-	IDETAPE_FL_DRQ_INTERRUPT	= (1 << 6),
-	/* pipeline active */
-	IDETAPE_FL_PIPELINE_ACTIVE	= (1 << 7),
-	/* 0 = no tape is loaded, so we don't rewind after ejecting */
-	IDETAPE_FL_MEDIUM_PRESENT	= (1 << 8),
-};
-
-/* A define for the READ BUFFER command */
-#define IDETAPE_RETRIEVE_FAULTY_BLOCK	6
-
-/* Some defines for the SPACE command */
-#define IDETAPE_SPACE_OVER_FILEMARK	1
-#define IDETAPE_SPACE_TO_EOD		3
-
-/* Some defines for the LOAD UNLOAD command */
-#define IDETAPE_LU_LOAD_MASK		1
-#define IDETAPE_LU_RETENSION_MASK	2
-#define IDETAPE_LU_EOT_MASK		4
-
-/*
- * Special requests for our block device strategy routine.
- *
- * In order to service a character device command, we add special requests to
- * the tail of our block device request queue and wait for their completion.
- */
-
-enum {
-	REQ_IDETAPE_PC1		= (1 << 0), /* packet command (first stage) */
-	REQ_IDETAPE_PC2		= (1 << 1), /* packet command (second stage) */
-	REQ_IDETAPE_READ	= (1 << 2),
-	REQ_IDETAPE_WRITE	= (1 << 3),
-	REQ_IDETAPE_READ_BUFFER	= (1 << 4),
-};
-
-/* Error codes returned in rq->errors to the higher part of the driver. */
-#define	IDETAPE_ERROR_GENERAL		101
-#define	IDETAPE_ERROR_FILEMARK		102
-#define	IDETAPE_ERROR_EOD		103
-
-/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
-#define IDETAPE_BLOCK_DESCRIPTOR	0
-#define	IDETAPE_CAPABILITIES_PAGE	0x2a
-
 /*
  * The variables below are used for the character device interface. Additional
  * state variables are defined in our ide_drive_t structure.

-- 
Regards/Gruß,
    Boris.

Re: ide-tape redux (was: Re:)

[Bartlomiej Zolnierkiewicz]

On Wednesday 06 February 2008, Borislav Petkov wrote:
> ... and while we're at it ...
> 
> commit c824f79fe4040f7541d7e35c546bb57a22d2fe11
> Author: Borislav Petkov <petkovbb@gmail.com>
> Date:   Wed Feb 6 06:23:10 2008 +0100
> 
>     ide-tape: move all struct and other defs to the top
>     
>     Signed-off-by: Borislav Petkov <petkovbb@gmail.com>

looks good, but please do it before
"remove atomic test/set macros" patch

[PATCH 1/2] ide-tape: move all struct and other defs at the top

[Borislav Petkov]

Hi Bart,

thanks for the update earlier. I'll look into blk_{get,put}_request later and
try it on idefloppy. In the meantime, here are the patches as requested:

---
From 0d91862fc802d6f5aa79947b2685de6c209236f2 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Sat, 9 Feb 2008 19:48:13 +0100
Subject: [PATCH 1/2] ide-tape: move all struct and other defs at the top

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |  107 ++++++++++++++++++++++++-----------------------
 1 files changed, 55 insertions(+), 52 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index b3269d7..1fff560 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -225,6 +225,61 @@ typedef struct idetape_packet_command_s {
 /* Data direction */
 #define	PC_WRITING			5
 
+/* Tape door status */
+#define DOOR_UNLOCKED			0
+#define DOOR_LOCKED			1
+#define DOOR_EXPLICITLY_LOCKED		2
+
+/*
+ *	Tape flag bits values.
+ */
+#define IDETAPE_IGNORE_DSC		0
+/* 0 When the tape position is unknown */
+#define IDETAPE_ADDRESS_VALID		1
+#define IDETAPE_BUSY			2	/* Device already opened */
+/* Error detected in a pipeline stage */
+#define IDETAPE_PIPELINE_ERROR		3
+/* Attempt to auto-detect the current user block size */
+#define IDETAPE_DETECT_BS		4
+#define IDETAPE_FILEMARK		5	/* Currently on a filemark */
+#define IDETAPE_DRQ_INTERRUPT		6	/* DRQ interrupt device */
+#define IDETAPE_READ_ERROR		7
+#define IDETAPE_PIPELINE_ACTIVE		8	/* pipeline active */
+/* 0 = no tape is loaded, so we don't rewind after ejecting */
+#define IDETAPE_MEDIUM_PRESENT		9
+
+/* Some defines for the SPACE command */
+#define IDETAPE_SPACE_OVER_FILEMARK	1
+#define IDETAPE_SPACE_TO_EOD		3
+
+/* Some defines for the LOAD UNLOAD command */
+#define IDETAPE_LU_LOAD_MASK		1
+#define IDETAPE_LU_RETENSION_MASK	2
+#define IDETAPE_LU_EOT_MASK		4
+
+/*
+ * Special requests for our block device strategy routine.
+ *
+ * In order to service a character device command, we add special requests to
+ * the tail of our block device request queue and wait for their completion.
+ */
+
+enum {
+	REQ_IDETAPE_PC1		= (1 << 0), /* packet command (first stage) */
+	REQ_IDETAPE_PC2		= (1 << 1), /* packet command (second stage) */
+	REQ_IDETAPE_READ	= (1 << 2),
+	REQ_IDETAPE_WRITE	= (1 << 3),
+};
+
+/* Error codes returned in rq->errors to the higher part of the driver. */
+#define	IDETAPE_ERROR_GENERAL		101
+#define	IDETAPE_ERROR_FILEMARK		102
+#define	IDETAPE_ERROR_EOD		103
+
+/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
+#define IDETAPE_BLOCK_DESCRIPTOR	0
+#define	IDETAPE_CAPABILITIES_PAGE	0x2a
+
 /* A pipeline stage. */
 typedef struct idetape_stage_s {
 	struct request rq;			/* The corresponding request */
@@ -446,58 +501,6 @@ static void ide_tape_put(struct ide_tape_obj *tape)
 	mutex_unlock(&idetape_ref_mutex);
 }
 
-/* Tape door status */
-#define DOOR_UNLOCKED			0
-#define DOOR_LOCKED			1
-#define DOOR_EXPLICITLY_LOCKED		2
-
-/*
- *	Tape flag bits values.
- */
-#define IDETAPE_IGNORE_DSC		0
-#define IDETAPE_ADDRESS_VALID		1	/* 0 When the tape position is unknown */
-#define IDETAPE_BUSY			2	/* Device already opened */
-#define IDETAPE_PIPELINE_ERROR		3	/* Error detected in a pipeline stage */
-#define IDETAPE_DETECT_BS		4	/* Attempt to auto-detect the current user block size */
-#define IDETAPE_FILEMARK		5	/* Currently on a filemark */
-#define IDETAPE_DRQ_INTERRUPT		6	/* DRQ interrupt device */
-#define IDETAPE_READ_ERROR		7
-#define IDETAPE_PIPELINE_ACTIVE		8	/* pipeline active */
-/* 0 = no tape is loaded, so we don't rewind after ejecting */
-#define IDETAPE_MEDIUM_PRESENT		9
-
-/* Some defines for the SPACE command */
-#define IDETAPE_SPACE_OVER_FILEMARK	1
-#define IDETAPE_SPACE_TO_EOD		3
-
-/* Some defines for the LOAD UNLOAD command */
-#define IDETAPE_LU_LOAD_MASK		1
-#define IDETAPE_LU_RETENSION_MASK	2
-#define IDETAPE_LU_EOT_MASK		4
-
-/*
- * Special requests for our block device strategy routine.
- *
- * In order to service a character device command, we add special requests to
- * the tail of our block device request queue and wait for their completion.
- */
-
-enum {
-	REQ_IDETAPE_PC1		= (1 << 0), /* packet command (first stage) */
-	REQ_IDETAPE_PC2		= (1 << 1), /* packet command (second stage) */
-	REQ_IDETAPE_READ	= (1 << 2),
-	REQ_IDETAPE_WRITE	= (1 << 3),
-};
-
-/* Error codes returned in rq->errors to the higher part of the driver. */
-#define	IDETAPE_ERROR_GENERAL		101
-#define	IDETAPE_ERROR_FILEMARK		102
-#define	IDETAPE_ERROR_EOD		103
-
-/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
-#define IDETAPE_BLOCK_DESCRIPTOR	0
-#define	IDETAPE_CAPABILITIES_PAGE	0x2a
-
 /*
  * The variables below are used for the character device interface. Additional
  * state variables are defined in our ide_drive_t structure.
-- 
1.5.3.7



-- 
Regards/Gruß,
    Boris.

Re: [PATCH 1/2] ide-tape: move all struct and other defs at the top

[Bartlomiej Zolnierkiewicz]

On Saturday 09 February 2008, Borislav Petkov wrote:
> Hi Bart,
> 
> thanks for the update earlier. I'll look into blk_{get,put}_request later and
> try it on idefloppy. In the meantime, here are the patches as requested:

Thanks.

> ---
> From 0d91862fc802d6f5aa79947b2685de6c209236f2 Mon Sep 17 00:00:00 2001
> From: Borislav Petkov <petkovbb@gmail.com>
> Date: Sat, 9 Feb 2008 19:48:13 +0100
> Subject: [PATCH 1/2] ide-tape: move all struct and other defs at the top
> 
> Signed-off-by: Borislav Petkov <petkovbb@gmail.com>

applied

> ---
>  drivers/ide/ide-tape.c |  107 ++++++++++++++++++++++++-----------------------
>  1 files changed, 55 insertions(+), 52 deletions(-)

since there is no need to move defines for tape flags around (as they are
completely rewritten by the next patch) I removed this change from this patch
making it a bit simpler/smaller:

 drivers/ide/ide-tape.c |   74 ++++++++++++++++++++++++-------------------------
 1 file changed, 37 insertions(+), 37 deletions(-)

Re: ide-tape redux (was: Re:)

[Bartlomiej Zolnierkiewicz]

Hi,

On Wednesday 06 February 2008, Borislav Petkov wrote:
> On Tue, Feb 05, 2008 at 02:20:22AM +0100, Bartlomiej Zolnierkiewicz wrote:
> 
> [...]
> 
> > w.r.t. #11 ide-tape uses char devices and supports DSC so it is not as obvious
> > as in ide-floppy case that all atomic bitops can be just removed (extra audit
> > and some time -mm are required) so please resync/resubmit
> 
> Ok, here's what i think we should do here: There are two flags that handle DSC:
> PC_FL_WAIT_FOR_DSC and IDETAPE_FL_IGNORE_DSC. The first one is per pc and is set in
> all the packet command init functions ..create_bla_cmd() after their callers have
> created a pc on the stack and reached its ptr down for initialization. This case
> is carefree since the bit will be tested first in the interrupt handler and this
> happens only after the pc is queued (ide_do_drive_cmd()) into the request buffer.
> 
> The other flag, IDETAPE_FL_IGNORE_DSC, is polled for in the request handler and
> can be set when a pc is being retried and we should leave only those atomic
> tests intact, imho, but i'm definitely gonna need a second opinion here.

Actually for this flag it looks safe because the new request shouldn't be
queued while the old one is still active (IOW there should be no simultaneous
idetape_do_request() and idetape_end_request() calls).  OTOH some other
flags (especially IDETAPE_PIPELINE_ACTIVE) looks un-safe (pileline can be
active while ->open on character device happens).

Given that this driver is currently scheduled for removal and that complete
audit/analysis would be quite costly I don't think that removing atomic bitops
from tape->flags is worth it (for pc->flags it is fine).

Could you please recast the patch accordingly?

[ + some minor issues below ]

> ---
> 
> commit 1ed8ae92249d5dff7af4ee88710ea08ff3f3356f
> Author: Borislav Petkov <petkovbb@gmail.com>
> Date:   Tue Feb 5 08:05:35 2008 +0100
> 
>     ide-tape: remove atomic test/set macros
>     
>     Also, since the driver supports DSC, leave the atomic tests
>     for the IDETAPE_FL_IGNORE_DSC bit untouched because this is polled
>     for in the request handler and can be set in the interrupt
>     handler through idetape_retry_pc() after enabling interrupts.
>     
>     Finally, remove flag IDETAPE_READ_ERROR since it is unused.
>     
>     Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
> 
> diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
> index e59e49e..9455ce4 100644
> --- a/drivers/ide/ide-tape.c
> +++ b/drivers/ide/ide-tape.c
> @@ -206,24 +206,24 @@ typedef struct idetape_packet_command_s {
>  	/* Temporary buffer */
>  	u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE];
>  	/* Status/Action bit flags: long for set_bit */
> -	unsigned long flags;
> +	unsigned int flags;

please leave it as 'unsigned long' to match other drivers

>  } idetape_pc_t;
>  
> -/*
> - *	Packet command flag bits.
> - */
> -/* Set when an error is considered normal - We won't retry */
> -#define	PC_ABORT			0
> -/* 1 When polling for DSC on a media access command */
> -#define PC_WAIT_FOR_DSC			1
> -/* 1 when we prefer to use DMA if possible */
> -#define PC_DMA_RECOMMENDED		2
> -/* 1 while DMA in progress */
> -#define	PC_DMA_IN_PROGRESS		3
> -/* 1 when encountered problem during DMA */
> -#define	PC_DMA_ERROR			4
> -/* Data direction */
> -#define	PC_WRITING			5
> +/* Packet command flag bits. */
> +enum {
> +	/* Set when an error is considered normal - We won't retry */
> +	PC_FL_ABORT		= (1 << 0),
> +	/* 1 When polling for DSC on a media access command */
> +	PC_FL_WAIT_FOR_DSC	= (1 << 1),
> +	/* 1 when we prefer to use DMA if possible */
> +	PC_FL_DMA_RECOMMENDED	= (1 << 2),
> +	/* 1 while DMA in progress */
> +	PC_FL_DMA_IN_PROGRESS	= (1 << 3),
> +	/* 1 when encountered problem during DMA */
> +	PC_FL_DMA_ERROR		= (1 << 4),
> +	/* Data direction */
> +	PC_FL_WRITING		= (1 <<	5),

Why not PC_FLAG_*?  [ It would match flags in ide-floppy ]

> +};
>  
>  /* A pipeline stage. */
>  typedef struct idetape_stage_s {
> @@ -357,8 +357,7 @@ typedef struct ide_tape_obj {
>  	/* Wasted space in each stage */
>  	int excess_bh_size;
>  
> -	/* Status/Action flags: long for set_bit */
> -	unsigned long flags;
> +	unsigned int flags;

please leave it as 'unsigned long'

[ besides I don't think that mixing atomic and non-atomic access on
  the _same_ variable is OK ]

>  	/* protects the ide-tape queue */
>  	spinlock_t lock;
>  
> @@ -451,20 +450,26 @@ static void ide_tape_put(struct ide_tape_obj *tape)
>  #define DOOR_LOCKED			1
>  #define DOOR_EXPLICITLY_LOCKED		2
>  
> -/*
> - *	Tape flag bits values.
> - */
> -#define IDETAPE_IGNORE_DSC		0
> -#define IDETAPE_ADDRESS_VALID		1	/* 0 When the tape position is unknown */
> -#define IDETAPE_BUSY			2	/* Device already opened */
> -#define IDETAPE_PIPELINE_ERROR		3	/* Error detected in a pipeline stage */
> -#define IDETAPE_DETECT_BS		4	/* Attempt to auto-detect the current user block size */
> -#define IDETAPE_FILEMARK		5	/* Currently on a filemark */
> -#define IDETAPE_DRQ_INTERRUPT		6	/* DRQ interrupt device */
> -#define IDETAPE_READ_ERROR		7
> -#define IDETAPE_PIPELINE_ACTIVE		8	/* pipeline active */
> -/* 0 = no tape is loaded, so we don't rewind after ejecting */
> -#define IDETAPE_MEDIUM_PRESENT		9
> +/* Tape flag bits values. */
> +enum {
> +	IDETAPE_FL_IGNORE_DSC		= (1 << 0),
> +	/* 0 When the tape position is unknown */
> +	IDETAPE_FL_ADDRESS_VALID	= (1 <<	1),
> +	/* Device already opened */
> +	IDETAPE_FL_BUSY			= (1 << 2),
> +	/* Error detected in a pipeline stage */
> +	IDETAPE_FL_PIPELINE_ERR	= (1 <<	3),
> +	/* Attempt to auto-detect the current user block size */
> +	IDETAPE_FL_DETECT_BS		= (1 << 4),
> +	/* Currently on a filemark */
> +	IDETAPE_FL_FILEMARK		= (1 << 5),
> +	/* DRQ interrupt device */
> +	IDETAPE_FL_DRQ_INTERRUPT	= (1 << 6),
> +	/* pipeline active */
> +	IDETAPE_FL_PIPELINE_ACTIVE	= (1 << 7),
> +	/* 0 = no tape is loaded, so we don't rewind after ejecting */
> +	IDETAPE_FL_MEDIUM_PRESENT	= (1 << 8),

Why not IDETAPE_FLAG_*?

The rest of the patch looks good.

[PATCH 2/2] ide-tape: remove atomic test/set macros for packet commands

[Borislav Petkov]

From 92dd5c1cfb27c0945894a3a055098290047d1ff0 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Sat, 9 Feb 2008 20:33:48 +0100
Subject: [PATCH 2/2] ide-tape: remove atomic test/set macros for packet commands

Removing the atomic tests for pc's is unobjectionable. Since this driver will
probably go to /dev/null soon, the atomic tests for tape->flags are left in
place for there are some situations where they're needed (chrdev DSC handling,
low level pipeline operation and so on). While at it, rename all test/set flag
bit defines explicitly to *_FLAG_* for clarity.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |  208 +++++++++++++++++++++++++-----------------------
 1 files changed, 109 insertions(+), 99 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 1fff560..09ff9b0 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -209,44 +209,47 @@ typedef struct idetape_packet_command_s {
 	unsigned long flags;
 } idetape_pc_t;
 
-/*
- *	Packet command flag bits.
- */
-/* Set when an error is considered normal - We won't retry */
-#define	PC_ABORT			0
-/* 1 When polling for DSC on a media access command */
-#define PC_WAIT_FOR_DSC			1
-/* 1 when we prefer to use DMA if possible */
-#define PC_DMA_RECOMMENDED		2
-/* 1 while DMA in progress */
-#define	PC_DMA_IN_PROGRESS		3
-/* 1 when encountered problem during DMA */
-#define	PC_DMA_ERROR			4
-/* Data direction */
-#define	PC_WRITING			5
+/* Packet command flag bits. */
+enum {
+	/* Set when an error is considered normal - We won't retry */
+	PC_FLAG_ABORT		= (1 << 0),
+	/* 1 When polling for DSC on a media access command */
+	PC_FLAG_WAIT_FOR_DSC	= (1 << 1),
+	/* 1 when we prefer to use DMA if possible */
+	PC_FLAG_DMA_RECOMMENDED	= (1 << 2),
+	/* 1 while DMA in progress */
+	PC_FLAG_DMA_IN_PROGRESS	= (1 << 3),
+	/* 1 when encountered problem during DMA */
+	PC_FLAG_DMA_ERROR		= (1 << 4),
+	/* Data direction */
+	PC_FLAG_WRITING		= (1 <<	5),
+};
 
 /* Tape door status */
 #define DOOR_UNLOCKED			0
 #define DOOR_LOCKED			1
 #define DOOR_EXPLICITLY_LOCKED		2
 
-/*
- *	Tape flag bits values.
- */
-#define IDETAPE_IGNORE_DSC		0
-/* 0 When the tape position is unknown */
-#define IDETAPE_ADDRESS_VALID		1
-#define IDETAPE_BUSY			2	/* Device already opened */
-/* Error detected in a pipeline stage */
-#define IDETAPE_PIPELINE_ERROR		3
-/* Attempt to auto-detect the current user block size */
-#define IDETAPE_DETECT_BS		4
-#define IDETAPE_FILEMARK		5	/* Currently on a filemark */
-#define IDETAPE_DRQ_INTERRUPT		6	/* DRQ interrupt device */
-#define IDETAPE_READ_ERROR		7
-#define IDETAPE_PIPELINE_ACTIVE		8	/* pipeline active */
-/* 0 = no tape is loaded, so we don't rewind after ejecting */
-#define IDETAPE_MEDIUM_PRESENT		9
+/* Tape flag bits values. */
+enum {
+	IDETAPE_FLAG_IGNORE_DSC		= (1 << 0),
+	/* 0 When the tape position is unknown */
+	IDETAPE_FLAG_ADDRESS_VALID	= (1 <<	1),
+	/* Device already opened */
+	IDETAPE_FLAG_BUSY			= (1 << 2),
+	/* Error detected in a pipeline stage */
+	IDETAPE_FLAG_PIPELINE_ERR	= (1 <<	3),
+	/* Attempt to auto-detect the current user block size */
+	IDETAPE_FLAG_DETECT_BS		= (1 << 4),
+	/* Currently on a filemark */
+	IDETAPE_FLAG_FILEMARK		= (1 << 5),
+	/* DRQ interrupt device */
+	IDETAPE_FLAG_DRQ_INTERRUPT	= (1 << 6),
+	/* pipeline active */
+	IDETAPE_FLAG_PIPELINE_ACTIVE	= (1 << 7),
+	/* 0 = no tape is loaded, so we don't rewind after ejecting */
+	IDETAPE_FLAG_MEDIUM_PRESENT	= (1 << 8),
+};
 
 /* Some defines for the SPACE command */
 #define IDETAPE_SPACE_OVER_FILEMARK	1
@@ -584,7 +587,7 @@ static void idetape_update_buffers(idetape_pc_t *pc)
 	int count;
 	unsigned int bcount = pc->actually_transferred;
 
-	if (test_bit(PC_WRITING, &pc->flags))
+	if (pc->flags & PC_FLAG_WRITING)
 		return;
 	while (bcount) {
 		if (bh == NULL) {
@@ -671,7 +674,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 		 pc->c[0], tape->sense_key, tape->asc, tape->ascq);
 
 	/* Correct pc->actually_transferred by asking the tape.	 */
-	if (test_bit(PC_DMA_ERROR, &pc->flags)) {
+	if (pc->flags & PC_FLAG_DMA_ERROR) {
 		pc->actually_transferred = pc->request_transfer -
 			tape->blk_size *
 			be32_to_cpu(get_unaligned((u32 *)&sense[3]));
@@ -690,26 +693,26 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 			/* don't report an error, everything's ok */
 			pc->error = 0;
 			/* don't retry read/write */
-			set_bit(PC_ABORT, &pc->flags);
+			pc->flags |= PC_FLAG_ABORT;
 		}
 	}
 	if (pc->c[0] == READ_6 && (sense[2] & 0x80)) {
 		pc->error = IDETAPE_ERROR_FILEMARK;
-		set_bit(PC_ABORT, &pc->flags);
+		pc->flags |= PC_FLAG_ABORT;
 	}
 	if (pc->c[0] == WRITE_6) {
 		if ((sense[2] & 0x40) || (tape->sense_key == 0xd
 		     && tape->asc == 0x0 && tape->ascq == 0x2)) {
 			pc->error = IDETAPE_ERROR_EOD;
-			set_bit(PC_ABORT, &pc->flags);
+			pc->flags |= PC_FLAG_ABORT;
 		}
 	}
 	if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
 		if (tape->sense_key == 8) {
 			pc->error = IDETAPE_ERROR_EOD;
-			set_bit(PC_ABORT, &pc->flags);
+			pc->flags |= PC_FLAG_ABORT;
 		}
-		if (!test_bit(PC_ABORT, &pc->flags) &&
+		if (!(pc->flags & PC_FLAG_ABORT) &&
 		    pc->actually_transferred)
 			pc->retries = IDETAPE_MAX_PC_RETRIES + 1;
 	}
@@ -865,14 +868,16 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 		if (rq->cmd[0] & REQ_IDETAPE_WRITE) {
 			remove_stage = 1;
 			if (error) {
-				set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+				set_bit(IDETAPE_FLAG_PIPELINE_ERR,
+					&tape->flags);
 				if (error == IDETAPE_ERROR_EOD)
 					idetape_abort_pipeline(drive,
 								active_stage);
 			}
 		} else if (rq->cmd[0] & REQ_IDETAPE_READ) {
 			if (error == IDETAPE_ERROR_EOD) {
-				set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+				set_bit(IDETAPE_FLAG_PIPELINE_ERR,
+					&tape->flags);
 				idetape_abort_pipeline(drive, active_stage);
 			}
 		}
@@ -905,7 +910,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
 	if (remove_stage)
 		idetape_remove_stage_head(drive);
 	if (tape->active_data_rq == NULL)
-		clear_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+		clear_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags);
 	spin_unlock_irqrestore(&tape->lock, flags);
 	return 0;
 }
@@ -984,7 +989,7 @@ static ide_startstop_t idetape_retry_pc (ide_drive_t *drive)
 	pc = idetape_next_pc_storage(drive);
 	rq = idetape_next_rq_storage(drive);
 	idetape_create_request_sense_cmd(pc);
-	set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+	set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
 	idetape_queue_pc_head(drive, pc, rq);
 	return ide_stopped;
 }
@@ -1031,7 +1036,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 	/* Clear the interrupt */
 	stat = ide_read_status(drive);
 
-	if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+	if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
 		if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) {
 			/*
 			 * A DMA error is sometimes expected. For example,
@@ -1054,7 +1059,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 			 * data transfer will occur, but no DMA error.
 			 * (AS, 19 Apr 2001)
 			 */
-			set_bit(PC_DMA_ERROR, &pc->flags);
+			pc->flags |= PC_FLAG_DMA_ERROR;
 		} else {
 			pc->actually_transferred = pc->request_transfer;
 			idetape_update_buffers(pc);
@@ -1068,7 +1073,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 		debug_log(DBG_SENSE, "Packet command completed, %d bytes"
 				" transferred\n", pc->actually_transferred);
 
-		clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
+		pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
 		local_irq_enable();
 
 #if SIMULATE_ERRORS
@@ -1081,7 +1086,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 #endif
 		if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE)
 			stat &= ~ERR_STAT;
-		if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
+		if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
 			/* Error detected */
 			debug_log(DBG_ERR, "%s: I/O error\n", tape->name);
 
@@ -1097,7 +1102,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 			return idetape_retry_pc(drive);
 		}
 		pc->error = 0;
-		if (test_bit(PC_WAIT_FOR_DSC, &pc->flags) &&
+		if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) &&
 		    (stat & SEEK_STAT) == 0) {
 			/* Media access command */
 			tape->dsc_polling_start = jiffies;
@@ -1112,7 +1117,9 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 		/* Command finished - Call the callback function */
 		return pc->callback(drive);
 	}
-	if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+
+	if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
+		pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
 		printk(KERN_ERR "ide-tape: The tape wants to issue more "
 				"interrupts in DMA mode\n");
 		printk(KERN_ERR "ide-tape: DMA disabled, reverting to PIO\n");
@@ -1129,7 +1136,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 		printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__);
 		return ide_do_reset(drive);
 	}
-	if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) {
+	if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
 		/* Hopefully, we will never get here */
 		printk(KERN_ERR "ide-tape: We wanted to %s, ",
 				(ireason & IO) ? "Write" : "Read");
@@ -1137,7 +1144,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 				(ireason & IO) ? "Read" : "Write");
 		return ide_do_reset(drive);
 	}
-	if (!test_bit(PC_WRITING, &pc->flags)) {
+	if (!(pc->flags & PC_FLAG_WRITING)) {
 		/* Reading - Check that we have enough space */
 		temp = pc->actually_transferred + bcount;
 		if (temp > pc->request_transfer) {
@@ -1249,7 +1256,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
 	ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
 #ifdef CONFIG_BLK_DEV_IDEDMA
 	/* Begin DMA, if necessary */
-	if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags))
+	if (pc->flags & PC_FLAG_DMA_IN_PROGRESS)
 		hwif->dma_start(drive);
 #endif
 	/* Send the actual packet */
@@ -1276,13 +1283,13 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
 	tape->pc = pc;
 
 	if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
-	    test_bit(PC_ABORT, &pc->flags)) {
+		(pc->flags & PC_FLAG_ABORT)) {
 		/*
 		 * We will "abort" retrying a packet command in case legitimate
 		 * error code was received (crossing a filemark, or end of the
 		 * media, for example).
 		 */
-		if (!test_bit(PC_ABORT, &pc->flags)) {
+		if (!(pc->flags & PC_FLAG_ABORT)) {
 			if (!(pc->c[0] == TEST_UNIT_READY &&
 			      tape->sense_key == 2 && tape->asc == 4 &&
 			     (tape->ascq == 1 || tape->ascq == 8))) {
@@ -1308,20 +1315,22 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
 	/* Request to transfer the entire buffer at once */
 	bcount = pc->request_transfer;
 
-	if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) {
+	if (pc->flags & PC_FLAG_DMA_ERROR) {
+		pc->flags &= ~PC_FLAG_DMA_ERROR;
 		printk(KERN_WARNING "ide-tape: DMA disabled, "
 				"reverting to PIO\n");
 		ide_dma_off(drive);
 	}
-	if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
+	if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma)
 		dma_ok = !hwif->dma_setup(drive);
 
 	ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
 			   IDE_TFLAG_OUT_DEVICE, bcount, dma_ok);
 
-	if (dma_ok)			/* Will begin DMA later */
-		set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
-	if (test_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags)) {
+	if (dma_ok)
+		/* Will begin DMA later */
+		pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
+	if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags)) {
 		ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc,
 				    IDETAPE_WAIT_CMD, NULL);
 		return ide_started;
@@ -1509,7 +1518,7 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
 	pc->buffer_size = length * tape->blk_size;
 	pc->request_transfer = pc->buffer_size;
 	if (pc->request_transfer == tape->stage_size)
-		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+		pc->flags |= PC_FLAG_DMA_RECOMMENDED;
 }
 
 static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
@@ -1520,7 +1529,7 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
 	pc->c[1] = 1;
 	pc->callback = &idetape_rw_callback;
-	set_bit(PC_WRITING, &pc->flags);
+	pc->flags |= PC_FLAG_WRITING;
 	pc->bh = bh;
 	pc->b_data = bh->b_data;
 	pc->b_count = atomic_read(&bh->b_count);
@@ -1528,7 +1537,7 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
 	pc->buffer_size = length * tape->blk_size;
 	pc->request_transfer = pc->buffer_size;
 	if (pc->request_transfer == tape->stage_size)
-		set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+		pc->flags |= PC_FLAG_DMA_RECOMMENDED;
 }
 
 static ide_startstop_t idetape_do_request(ide_drive_t *drive,
@@ -1572,10 +1581,10 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	stat = ide_read_status(drive);
 
 	if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2))
-		set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+		set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
 
 	if (drive->post_reset == 1) {
-		set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+		set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
 		drive->post_reset = 0;
 	}
 
@@ -1583,7 +1592,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 		tape->insert_speed = tape->insert_size / 1024 * HZ /
 					(jiffies - tape->insert_time);
 	idetape_calculate_speeds(drive);
-	if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) &&
+	if (!test_and_clear_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags) &&
 	    (stat & SEEK_STAT) == 0) {
 		if (postponed_rq == NULL) {
 			tape->dsc_polling_start = jiffies;
@@ -1641,7 +1650,7 @@ static inline int idetape_pipeline_active(idetape_tape_t *tape)
 {
 	int rc1, rc2;
 
-	rc1 = test_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+	rc1 = test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags);
 	rc2 = (tape->active_data_rq != NULL);
 	return rc1;
 }
@@ -1887,7 +1896,7 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
 		if (readpos[0] & 0x4) {
 			printk(KERN_INFO "ide-tape: Block location is unknown"
 					 "to the tape\n");
-			clear_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
+			clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
 			idetape_end_request(drive, 0, 0);
 		} else {
 			debug_log(DBG_SENSE, "Block Location - %u\n",
@@ -1896,7 +1905,7 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
 			tape->partition = readpos[1];
 			tape->first_frame =
 				be32_to_cpu(*(u32 *)&readpos[4]);
-			set_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
+			set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
 			idetape_end_request(drive, 1, 0);
 		}
 	} else {
@@ -1915,7 +1924,7 @@ static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
 	idetape_init_pc(pc);
 	pc->c[0] = WRITE_FILEMARKS;
 	pc->c[4] = write_filemark;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FLAG_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -1956,7 +1965,7 @@ static void idetape_create_load_unload_cmd(ide_drive_t *drive, idetape_pc_t *pc,
 	idetape_init_pc(pc);
 	pc->c[0] = START_STOP;
 	pc->c[4] = cmd;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FLAG_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -1967,7 +1976,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
 	int load_attempted = 0;
 
 	/* Wait for the tape to become ready */
-	set_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+	set_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags);
 	timeout += jiffies;
 	while (time_before(jiffies, timeout)) {
 		idetape_create_test_unit_ready_cmd(&pc);
@@ -2040,7 +2049,7 @@ static void idetape_create_locate_cmd(ide_drive_t *drive, idetape_pc_t *pc,
 	pc->c[1] = 2;
 	put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
 	pc->c[8] = partition;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FLAG_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2071,7 +2080,7 @@ static int __idetape_discard_read_pipeline(ide_drive_t *drive)
 
 	/* Remove merge stage. */
 	cnt = tape->merge_stage_size / tape->blk_size;
-	if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags))
+	if (test_and_clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
 		++cnt;		/* Filemarks count as 1 sector */
 	tape->merge_stage_size = 0;
 	if (tape->merge_stage != NULL) {
@@ -2080,7 +2089,7 @@ static int __idetape_discard_read_pipeline(ide_drive_t *drive)
 	}
 
 	/* Clear pipeline flags. */
-	clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+	clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags);
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
 
 	/* Remove pipeline stages. */
@@ -2194,7 +2203,7 @@ static void idetape_plug_pipeline(ide_drive_t *drive)
 	if (tape->next_stage == NULL)
 		return;
 	if (!idetape_pipeline_active(tape)) {
-		set_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+		set_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags);
 		idetape_activate_next_stage(drive);
 		(void) ide_do_drive_cmd(drive, tape->active_data_rq, ide_end);
 	}
@@ -2213,7 +2222,7 @@ static void idetape_create_rewind_cmd(ide_drive_t *drive, idetape_pc_t *pc)
 {
 	idetape_init_pc(pc);
 	pc->c[0] = REZERO_UNIT;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FLAG_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2222,7 +2231,7 @@ static void idetape_create_erase_cmd(idetape_pc_t *pc)
 	idetape_init_pc(pc);
 	pc->c[0] = ERASE;
 	pc->c[1] = 1;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FLAG_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2232,7 +2241,7 @@ static void idetape_create_space_cmd(idetape_pc_t *pc, int count, u8 cmd)
 	pc->c[0] = SPACE;
 	put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
 	pc->c[1] = cmd;
-	set_bit(PC_WAIT_FOR_DSC, &pc->flags);
+	pc->flags |= PC_FLAG_WAIT_FOR_DSC;
 	pc->callback = &idetape_pc_callback;
 }
 
@@ -2319,7 +2328,7 @@ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
 			idetape_plug_pipeline(drive);
 		}
 	}
-	if (test_and_clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
+	if (test_and_clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags))
 		/* Return a deferred error */
 		return -EIO;
 	return blocks;
@@ -2395,7 +2404,7 @@ static void idetape_empty_write_pipeline(ide_drive_t *drive)
 		__idetape_kfree_stage(tape->merge_stage);
 		tape->merge_stage = NULL;
 	}
-	clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+	clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags);
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
 
 	/*
@@ -2483,7 +2492,7 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
 	rq.sector = tape->first_frame;
 	rq.nr_sectors = blocks;
 	rq.current_nr_sectors = blocks;
-	if (!test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags) &&
+	if (!test_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags) &&
 	    tape->nr_stages < max_stages) {
 		new_stage = idetape_kmalloc_stage(tape);
 		while (new_stage != NULL) {
@@ -2520,13 +2529,13 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
 	debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
 
 	/* If we are at a filemark, return a read length of 0 */
-	if (test_bit(IDETAPE_FILEMARK, &tape->flags))
+	if (test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
 		return 0;
 
 	/* Wait for the next block to reach the head of the pipeline. */
 	idetape_init_read(drive, tape->max_stages);
 	if (tape->first_stage == NULL) {
-		if (test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
+		if (test_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags))
 			return 0;
 		return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
 					tape->merge_stage->bh);
@@ -2543,7 +2552,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
 	else {
 		idetape_switch_buffers(tape, tape->first_stage);
 		if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK)
-			set_bit(IDETAPE_FILEMARK, &tape->flags);
+			set_bit(IDETAPE_FLAG_FILEMARK, &tape->flags);
 		spin_lock_irqsave(&tape->lock, flags);
 		idetape_remove_stage_head(drive);
 		spin_unlock_irqrestore(&tape->lock, flags);
@@ -2690,12 +2699,13 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
 	if (tape->chrdev_dir == IDETAPE_DIR_READ) {
 		/* its a read-ahead buffer, scan it for crossed filemarks. */
 		tape->merge_stage_size = 0;
-		if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags))
+		if (test_and_clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
 			++count;
 		while (tape->first_stage != NULL) {
 			if (count == mt_count) {
 				if (mt_op == MTFSFM)
-					set_bit(IDETAPE_FILEMARK, &tape->flags);
+					set_bit(IDETAPE_FLAG_FILEMARK,
+						&tape->flags);
 				return 0;
 			}
 			spin_lock_irqsave(&tape->lock, flags);
@@ -2779,7 +2789,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
 	if (tape->chrdev_dir != IDETAPE_DIR_READ) {
-		if (test_bit(IDETAPE_DETECT_BS, &tape->flags))
+		if (test_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags))
 			if (count > tape->blk_size &&
 			    (count % tape->blk_size) == 0)
 				tape->user_bs_factor = count / tape->blk_size;
@@ -2822,7 +2832,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 		tape->merge_stage_size = bytes_read-temp;
 	}
 finish:
-	if (!actually_read && test_bit(IDETAPE_FILEMARK, &tape->flags)) {
+	if (!actually_read && test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags)) {
 		debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
 
 		idetape_space_over_filemarks(drive, MTFSF, 1);
@@ -3015,7 +3025,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 					      !IDETAPE_LU_LOAD_MASK);
 		retval = idetape_queue_pc_tail(drive, &pc);
 		if (!retval)
-			clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+			clear_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags);
 		return retval;
 	case MTNOP:
 		idetape_discard_read_pipeline(drive, 0);
@@ -3038,9 +3048,9 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 			    mt_count % tape->blk_size)
 				return -EIO;
 			tape->user_bs_factor = mt_count / tape->blk_size;
-			clear_bit(IDETAPE_DETECT_BS, &tape->flags);
+			clear_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags);
 		} else
-			set_bit(IDETAPE_DETECT_BS, &tape->flags);
+			set_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags);
 		return 0;
 	case MTSEEK:
 		idetape_discard_read_pipeline(drive, 0);
@@ -3188,24 +3198,24 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 
 	filp->private_data = tape;
 
-	if (test_and_set_bit(IDETAPE_BUSY, &tape->flags)) {
+	if (test_and_set_bit(IDETAPE_FLAG_BUSY, &tape->flags)) {
 		retval = -EBUSY;
 		goto out_put_tape;
 	}
 
 	retval = idetape_wait_ready(drive, 60 * HZ);
 	if (retval) {
-		clear_bit(IDETAPE_BUSY, &tape->flags);
+		clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
 		printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
 		goto out_put_tape;
 	}
 
 	idetape_read_position(drive);
-	if (!test_bit(IDETAPE_ADDRESS_VALID, &tape->flags))
+	if (!test_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags))
 		(void)idetape_rewind_tape(drive);
 
 	if (tape->chrdev_dir != IDETAPE_DIR_READ)
-		clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+		clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags);
 
 	/* Read block size and write protect status from drive. */
 	ide_tape_get_bsize_from_bdesc(drive);
@@ -3220,7 +3230,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 	if (tape->write_prot) {
 		if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
 		    (filp->f_flags & O_ACCMODE) == O_RDWR) {
-			clear_bit(IDETAPE_BUSY, &tape->flags);
+			clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
 			retval = -EROFS;
 			goto out_put_tape;
 		}
@@ -3285,7 +3295,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
 		__idetape_kfree_stage(tape->cache_stage);
 		tape->cache_stage = NULL;
 	}
-	if (minor < 128 && test_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags))
+	if (minor < 128 && test_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags))
 		(void) idetape_rewind_tape(drive);
 	if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
 		if (tape->door_locked == DOOR_LOCKED) {
@@ -3295,7 +3305,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
 			}
 		}
 	}
-	clear_bit(IDETAPE_BUSY, &tape->flags);
+	clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
 	ide_tape_put(tape);
 	unlock_kernel();
 	return 0;
@@ -3499,7 +3509,7 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 
 	/* Command packet DRQ type */
 	if (((gcw[0] & 0x60) >> 5) == 1)
-		set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags);
+		set_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags);
 
 	tape->min_pipeline = 10;
 	tape->max_pipeline = 10;
-- 
1.5.3.7

-- 
Regards/Gruß,
    Boris.

Re: [PATCH 2/2] ide-tape: remove atomic test/set macros for packet commands

[Bartlomiej Zolnierkiewicz]

On Saturday 09 February 2008, Borislav Petkov wrote:
> From 92dd5c1cfb27c0945894a3a055098290047d1ff0 Mon Sep 17 00:00:00 2001
> From: Borislav Petkov <petkovbb@gmail.com>
> Date: Sat, 9 Feb 2008 20:33:48 +0100
> Subject: [PATCH 2/2] ide-tape: remove atomic test/set macros for packet commands
> 
> Removing the atomic tests for pc's is unobjectionable. Since this driver will
> probably go to /dev/null soon, the atomic tests for tape->flags are left in
> place for there are some situations where they're needed (chrdev DSC handling,
> low level pipeline operation and so on). While at it, rename all test/set flag
> bit defines explicitly to *_FLAG_* for clarity.
> 
> Signed-off-by: Borislav Petkov <petkovbb@gmail.com>

applied