From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, linux-ide@vger.kernel.org
Cc: mikpe@it.uu.se, Tejun Heo <htejun@gmail.com>
Subject: [PATCH 2/5] libata: kill ATA_LFLAG_HRST_TO_RESUME
Date: Tue, 11 Mar 2008 13:27:31 +0900 [thread overview]
Message-ID: <12052096541042-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <12052096544056-git-send-email-htejun@gmail.com>
Now that hardreset is the preferred method of resetting, there's no
need for ATA_LFLAG_HRST_TO_RESUME flag. Kill it.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/ahci.c | 2 +-
drivers/ata/libata-pmp.c | 16 ----------------
drivers/ata/sata_nv.c | 5 -----
drivers/ata/sata_sil.c | 5 -----
include/linux/libata.h | 1 -
5 files changed, 1 insertions(+), 28 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index b88b38a..826a996 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -412,7 +412,7 @@ static const struct ata_port_info ahci_port_info[] = {
{
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
- .link_flags = AHCI_LFLAG_COMMON | ATA_LFLAG_HRST_TO_RESUME,
+ .link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_vt8251_ops,
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 8439fc8..7f8bcff 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -453,9 +453,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
if (vendor == 0x1095 && devid == 0x3726) {
/* sil3726 quirks */
ata_port_for_each_link(link, ap) {
- /* SError.N need a kick in the ass to get working */
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
/* class code report is unreliable */
if (link->pmp < 5)
link->flags |= ATA_LFLAG_ASSUME_ATA;
@@ -468,9 +465,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
} else if (vendor == 0x1095 && devid == 0x4723) {
/* sil4723 quirks */
ata_port_for_each_link(link, ap) {
- /* SError.N need a kick in the ass to get working */
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
/* class code report is unreliable */
if (link->pmp < 2)
link->flags |= ATA_LFLAG_ASSUME_ATA;
@@ -483,9 +477,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
} else if (vendor == 0x1095 && devid == 0x4726) {
/* sil4726 quirks */
ata_port_for_each_link(link, ap) {
- /* SError.N need a kick in the ass to get working */
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
/* Class code report is unreliable and SRST
* times out under certain configurations.
* Config device can be at port 0 or 5 and
@@ -513,13 +504,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
* otherwise. Don't try hard to recover it.
*/
ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
- } else if (vendor == 0x11ab && devid == 0x4140) {
- /* Marvell 88SM4140 quirks. Fan-out ports require PHY
- * reset to work; other than that, it behaves very
- * nicely.
- */
- ata_port_for_each_link(link, ap)
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
}
}
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index ce02e15..75b7653 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -579,7 +579,6 @@ static const struct ata_port_info nv_port_info[] = {
{
.sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
@@ -590,7 +589,6 @@ static const struct ata_port_info nv_port_info[] = {
{
.sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
@@ -601,7 +599,6 @@ static const struct ata_port_info nv_port_info[] = {
{
.sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
@@ -613,7 +610,6 @@ static const struct ata_port_info nv_port_info[] = {
.sht = &nv_adma_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_NCQ,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
@@ -625,7 +621,6 @@ static const struct ata_port_info nv_port_info[] = {
.sht = &nv_swncq_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_NCQ,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 0b8191b..7052915 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -60,7 +60,6 @@ enum {
SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO,
- SIL_DFL_LINK_FLAGS = ATA_LFLAG_HRST_TO_RESUME,
/*
* Controller IDs
@@ -215,7 +214,6 @@ static const struct ata_port_info sil_port_info[] = {
/* sil_3112 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@@ -225,7 +223,6 @@ static const struct ata_port_info sil_port_info[] = {
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
SIL_FLAG_NO_SATA_IRQ,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@@ -234,7 +231,6 @@ static const struct ata_port_info sil_port_info[] = {
/* sil_3512 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@@ -243,7 +239,6 @@ static const struct ata_port_info sil_port_info[] = {
/* sil_3114 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 618fbf2..8921c1c 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -163,7 +163,6 @@ enum {
ATA_DEV_NONE = 9, /* no device */
/* struct ata_link flags */
- ATA_LFLAG_HRST_TO_RESUME = (1 << 0), /* hardreset to resume link */
ATA_LFLAG_SKIP_D2H_BSY = (1 << 1), /* can't wait for the first D2H
* Register FIS clearing BSY */
ATA_LFLAG_NO_SRST = (1 << 2), /* avoid softreset */
--
1.5.2.4
next prev parent reply other threads:[~2008-03-11 4:27 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-11 4:27 [PATCHSET #upstream-fixes] block/libata: update and use block layer padding and draining, take 3 Tejun Heo
2008-03-11 4:27 ` [PATCH 1/5] libata: prefer hardreset Tejun Heo
2008-03-11 4:27 ` Tejun Heo [this message]
2008-03-11 4:27 ` [PATCH 3/5] libata: kill ATA_EHI_RESUME_LINK Tejun Heo
2008-03-11 4:27 ` [PATCH 4/5] libata: kill ATA_LFLAG_SKIP_D2H_BSY Tejun Heo
2008-03-11 4:27 ` [PATCH 5/5] libata: kill ata_ehi_schedule_probe() Tejun Heo
2008-03-11 4:29 ` Subject should be [PATCHSET libata-dev#upstream-fixes] libata: prefer hardreset, take #3 Tejun Heo
2008-03-16 22:07 ` Mikael Pettersson
2008-03-17 0:17 ` Tejun Heo
2008-03-17 8:19 ` Mikael Pettersson
2008-03-17 9:36 ` Tejun Heo
-- strict thread matches above, loose matches on Subject: below --
2008-03-11 3:41 [PATCHSET libata-dev#upstream] libata: prefer hardreset, take #2 Tejun Heo
2008-03-11 3:41 ` [PATCH 2/5] libata: kill ATA_LFLAG_HRST_TO_RESUME Tejun Heo
2008-01-23 15:21 [PATCHSET libata-dev#upstream] libata: prefer hardreset Tejun Heo
2008-01-23 15:21 ` [PATCH 2/5] libata: kill ATA_LFLAG_HRST_TO_RESUME Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12052096541042-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=mikpe@it.uu.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).