From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, linux-ide@vger.kernel.org, liml@rtr.ca,
alan@lxorguk.ukuu.org.uk, kngregertsen@norway.atmel.com,
sonic.adi@gmail.com, rmk@arm.linux.org.uk,
alessandro.zummo@towertech
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 3/9] libata: normalize port_info, port_operations and sht tables
Date: Tue, 11 Mar 2008 21:05:59 +0900 [thread overview]
Message-ID: <12052371672468-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <12052371651181-git-send-email-htejun@gmail.com>
Over the time, port info, ops and sht structures developed quite a bit
of inconsistencies. This patch updates drivers.
* Enable/disable_pm callbacks added to all ahci ops tables.
* Every driver for SFF controllers now uses ata_sff_port_start()
instead of ata_port_start() unless the driver has custom
implementation.
* Every driver for SFF controllers now uses ata_pci_default_filter()
unless the driver has custom implementation.
* Removed an odd port_info->sht initialization from ata_piix.c.
Likely a merge byproduct.
* A port which has ATA_FLAG_SATA set doesn't need to set cable_detect
to ata_cable_sata(). Remove it from via and mv port ops.
* Some drivers had unnecessary .max_sectors initialization which is
ignored and was missing .slave_destroy callback. Fixed.
* Removed unnecessary sht initializations port_info's.
* Removed onsolete scsi device suspend/resume callbacks from
pata_bf54x.
* No reason to set ata_pci_default_filter() and bmdma functions for
PIO-only drivers. Remove those callbacks and replace
ata_bmdma_irq_clear with ata_noop_irq_clear.
* pata_platform sets port_start to ata_dummy_ret0. port_start can
just be set to NULL.
* sata_fsl supports NCQ but was missing qc_defer. Fixed.
* pata_rb600_cf implements dummy port_start. Removed.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/ahci.c | 8 ++++++++
drivers/ata/ata_generic.c | 1 +
drivers/ata/ata_piix.c | 13 +++++++------
drivers/ata/pata_artop.c | 1 +
drivers/ata/pata_bf54x.c | 1 -
drivers/ata/pata_cmd64x.c | 6 +++---
drivers/ata/pata_cs5520.c | 1 +
drivers/ata/pata_cs5536.c | 2 +-
drivers/ata/pata_hpt3x3.c | 1 -
drivers/ata/pata_it8213.c | 2 +-
drivers/ata/pata_ixp4xx_cf.c | 3 +--
drivers/ata/pata_jmicron.c | 3 ++-
drivers/ata/pata_marvell.c | 1 +
drivers/ata/pata_mpc52xx.c | 4 ++--
drivers/ata/pata_netcell.c | 1 +
drivers/ata/pata_opti.c | 7 +------
drivers/ata/pata_optidma.c | 2 ++
drivers/ata/pata_platform.c | 4 ----
drivers/ata/pata_rb500_cf.c | 9 +--------
drivers/ata/pata_rz1000.c | 7 +------
drivers/ata/sata_fsl.c | 1 +
drivers/ata/sata_mv.c | 6 ------
drivers/ata/sata_nv.c | 11 ++++++++---
drivers/ata/sata_sil.c | 3 ++-
drivers/ata/sata_sis.c | 3 ++-
drivers/ata/sata_svw.c | 3 ++-
drivers/ata/sata_uli.c | 3 ++-
drivers/ata/sata_via.c | 12 ++++++++----
drivers/ata/sata_vsc.c | 3 ++-
29 files changed, 62 insertions(+), 60 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 5696f46..16a21b8 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -332,6 +332,8 @@ static const struct ata_port_operations ahci_vt8251_ops = {
.check_altstatus = ahci_check_status,
.dev_select = ata_noop_dev_select,
+ .dev_config = ahci_dev_config,
+
.tf_read = ahci_tf_read,
.qc_defer = sata_pmp_qc_defer_cmd_switch,
@@ -356,6 +358,8 @@ static const struct ata_port_operations ahci_vt8251_ops = {
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
#endif
+ .enable_pm = ahci_enable_alpm,
+ .disable_pm = ahci_disable_alpm,
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
@@ -366,6 +370,8 @@ static const struct ata_port_operations ahci_p5wdh_ops = {
.check_altstatus = ahci_check_status,
.dev_select = ata_noop_dev_select,
+ .dev_config = ahci_dev_config,
+
.tf_read = ahci_tf_read,
.qc_defer = sata_pmp_qc_defer_cmd_switch,
@@ -390,6 +396,8 @@ static const struct ata_port_operations ahci_p5wdh_ops = {
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
#endif
+ .enable_pm = ahci_enable_alpm,
+ .disable_pm = ahci_disable_alpm,
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 2053420..db4c3cb 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -114,6 +114,7 @@ static struct scsi_host_template generic_sht = {
static struct ata_port_operations generic_port_ops = {
.set_mode = generic_set_mode,
+ .mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index fae8404..067760a 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -336,7 +336,7 @@ static const struct ata_port_operations piix_pata_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct ata_port_operations ich_pata_ops = {
@@ -367,7 +367,7 @@ static const struct ata_port_operations ich_pata_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct ata_port_operations piix_sata_ops = {
@@ -385,6 +385,7 @@ static const struct ata_port_operations piix_sata_ops = {
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
+ .mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
@@ -393,7 +394,7 @@ static const struct ata_port_operations piix_sata_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct ata_port_operations piix_vmw_ops = {
@@ -425,7 +426,7 @@ static const struct ata_port_operations piix_vmw_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct ata_port_operations piix_sidpr_sata_ops = {
@@ -446,6 +447,7 @@ static const struct ata_port_operations piix_sidpr_sata_ops = {
.scr_read = piix_sidpr_scr_read,
.scr_write = piix_sidpr_scr_write,
+ .mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = piix_sidpr_error_handler,
@@ -454,7 +456,7 @@ static const struct ata_port_operations piix_sidpr_sata_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct piix_map_db ich5_map_db = {
@@ -683,7 +685,6 @@ static struct ata_port_info piix_port_info[] = {
[piix_pata_vmw] =
{
- .sht = &piix_sht,
.flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 2f81480..a238c7b 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -367,6 +367,7 @@ static const struct ata_port_operations artop6210_ops = {
static const struct ata_port_operations artop6260_ops = {
.set_piomode = artop6260_set_piomode,
.set_dmamode = artop6260_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 7f87f10..146c202 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1409,7 +1409,6 @@ static const struct ata_port_operations bfin_pata_ops = {
static struct ata_port_info bfin_port_info[] = {
{
- .sht = &bfin_sht,
.flags = ATA_FLAG_SLAVE_POSS
| ATA_FLAG_MMIO
| ATA_FLAG_NO_LEGACY,
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 1c9a8d9..e8c1262 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -313,7 +313,7 @@ static struct ata_port_operations cmd64x_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static struct ata_port_operations cmd646r1_port_ops = {
@@ -346,7 +346,7 @@ static struct ata_port_operations cmd646r1_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static struct ata_port_operations cmd648_port_ops = {
@@ -379,7 +379,7 @@ static struct ata_port_operations cmd648_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index dd6b235..44ad2c9 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -160,6 +160,7 @@ static struct scsi_host_template cs5520_sht = {
static struct ata_port_operations cs5520_port_ops = {
.set_piomode = cs5520_set_piomode,
.set_dmamode = cs5520_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 1c4ff9b..391aa88 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -269,7 +269,7 @@ static struct ata_port_operations cs5536_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
/**
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index cb8bdb6..c09f95a 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -189,7 +189,6 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static int printed_version;
static const struct ata_port_info info = {
- .sht = &hpt3x3_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
#if defined(CONFIG_PATA_HPT3X3_DMA)
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index e0c2cc2..25c49c2 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -250,13 +250,13 @@ static struct scsi_host_template it8213_sht = {
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 83e38cc..6eb8cc9 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -107,7 +107,6 @@ static struct scsi_host_template ixp4xx_sht = {
static struct ata_port_operations ixp4xx_port_ops = {
.set_mode = ixp4xx_set_mode,
- .mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -129,7 +128,7 @@ static struct ata_port_operations ixp4xx_port_ops = {
.irq_clear = ata_noop_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static void ixp4xx_setup_port(struct ata_port *ap,
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 00bbbbd..7d36fa8 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -148,6 +148,7 @@ static const struct ata_port_operations jmicron_ops = {
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = jmicron_error_handler,
@@ -168,7 +169,7 @@ static const struct ata_port_operations jmicron_ops = {
.irq_on = ata_irq_on,
/* Generic PATA PCI ATA helpers */
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index a81f25d..c4ee9b4 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -118,6 +118,7 @@ static const struct ata_port_operations marvell_ops = {
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = marvell_error_handler,
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index d84e0c8..fefe71d 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -272,13 +272,13 @@ static struct scsi_host_template mpc52xx_ata_sht = {
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
@@ -298,7 +298,7 @@ static struct ata_port_operations mpc52xx_ata_port_ops = {
.data_xfer = ata_data_xfer,
.irq_clear = ata_noop_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static int __devinit
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 0e4a08e..9fd1a84 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -47,6 +47,7 @@ static const struct ata_port_operations netcell_ops = {
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 8f79447..1e865f1 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -196,18 +196,13 @@ static struct ata_port_operations opti_port_ops = {
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
+ .irq_clear = ata_noop_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index be8c421..3f9d035 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -370,6 +370,7 @@ static struct scsi_host_template optidma_sht = {
static struct ata_port_operations optidma_port_ops = {
.set_piomode = optidma_set_pio_mode,
.set_dmamode = optidma_set_dma_mode,
+ .mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -404,6 +405,7 @@ static struct ata_port_operations optidma_port_ops = {
static struct ata_port_operations optiplus_port_ops = {
.set_piomode = optiplus_set_pio_mode,
.set_dmamode = optiplus_set_dma_mode,
+ .mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index a8429f5..602f556 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -46,8 +46,6 @@ static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unu
return 0;
}
-static int ata_dummy_ret0(struct ata_port *ap) { return 0; }
-
static struct scsi_host_template pata_platform_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -88,8 +86,6 @@ static struct ata_port_operations pata_platform_port_ops = {
.irq_clear = ata_noop_irq_clear,
.irq_on = ata_irq_on,
-
- .port_start = ata_dummy_ret0,
};
static void pata_platform_setup_port(struct ata_ioports *ioaddr,
diff --git a/drivers/ata/pata_rb500_cf.c b/drivers/ata/pata_rb500_cf.c
index 08c32af..22cb9e1 100644
--- a/drivers/ata/pata_rb500_cf.c
+++ b/drivers/ata/pata_rb500_cf.c
@@ -117,11 +117,6 @@ static irqreturn_t rb500_pata_irq_handler(int irq, void *dev_instance)
return IRQ_HANDLED;
}
-static int rb500_pata_port_start(struct ata_port *ap)
-{
- return 0;
-}
-
static struct ata_port_operations rb500_pata_port_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -138,12 +133,10 @@ static struct ata_port_operations rb500_pata_port_ops = {
.freeze = rb500_pata_freeze,
.thaw = rb500_pata_thaw,
.error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_handler = rb500_pata_irq_handler,
.irq_clear = ata_noop_irq_clear,
.irq_on = ata_irq_on,
-
- .port_start = rb500_pata_port_start,
};
/* ------------------------------------------------------------------------ */
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index ba8a31c..75b2521 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -79,11 +79,6 @@ static struct ata_port_operations rz1000_port_ops = {
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -96,7 +91,7 @@ static struct ata_port_operations rz1000_port_ops = {
.cable_detect = ata_cable_40wire,
.irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
+ .irq_clear = ata_noop_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 078f757..53ea883 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1216,6 +1216,7 @@ static const struct ata_port_operations sata_fsl_ops = {
.tf_read = sata_fsl_tf_read,
+ .qc_defer = ata_std_qc_defer,
.qc_prep = sata_fsl_qc_prep,
.qc_issue = sata_fsl_qc_issue,
.irq_clear = ata_noop_irq_clear,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index b3b3da4..4685bce 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -557,8 +557,6 @@ static const struct ata_port_operations mv5_ops = {
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .cable_detect = ata_cable_sata,
-
.qc_prep = mv_qc_prep,
.qc_issue = mv_qc_issue,
.data_xfer = ata_data_xfer,
@@ -585,8 +583,6 @@ static const struct ata_port_operations mv6_ops = {
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .cable_detect = ata_cable_sata,
-
.qc_prep = mv_qc_prep,
.qc_issue = mv_qc_issue,
.data_xfer = ata_data_xfer,
@@ -613,8 +609,6 @@ static const struct ata_port_operations mv_iie_ops = {
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .cable_detect = ata_cable_sata,
-
.qc_prep = mv_qc_prep_iie,
.qc_issue = mv_qc_issue,
.data_xfer = ata_data_xfer,
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 75b7653..bd5b6c3 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -452,6 +452,7 @@ static const struct ata_port_operations nv_generic_ops = {
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
+ .mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = nv_error_handler,
@@ -461,7 +462,7 @@ static const struct ata_port_operations nv_generic_ops = {
.irq_on = ata_irq_on,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct ata_port_operations nv_nf2_ops = {
@@ -476,6 +477,7 @@ static const struct ata_port_operations nv_nf2_ops = {
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
+ .mode_filter = ata_pci_default_filter,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
.error_handler = nv_error_handler,
@@ -485,7 +487,7 @@ static const struct ata_port_operations nv_nf2_ops = {
.irq_on = ata_irq_on,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct ata_port_operations nv_ck804_ops = {
@@ -500,6 +502,7 @@ static const struct ata_port_operations nv_ck804_ops = {
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
+ .mode_filter = ata_pci_default_filter,
.freeze = nv_ck804_freeze,
.thaw = nv_ck804_thaw,
.error_handler = nv_error_handler,
@@ -509,7 +512,7 @@ static const struct ata_port_operations nv_ck804_ops = {
.irq_on = ata_irq_on,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
.host_stop = nv_ck804_host_stop,
};
@@ -527,6 +530,7 @@ static const struct ata_port_operations nv_adma_ops = {
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_adma_qc_prep,
.qc_issue = nv_adma_qc_issue,
+ .mode_filter = ata_pci_default_filter,
.freeze = nv_adma_freeze,
.thaw = nv_adma_thaw,
.error_handler = nv_adma_error_handler,
@@ -558,6 +562,7 @@ static const struct ata_port_operations nv_swncq_ops = {
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_swncq_qc_prep,
.qc_issue = nv_swncq_qc_issue,
+ .mode_filter = ata_pci_default_filter,
.freeze = nv_mcp55_freeze,
.thaw = nv_mcp55_thaw,
.error_handler = nv_swncq_error_handler,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 7052915..53f0bae 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -192,6 +192,7 @@ static const struct ata_port_operations sil_ops = {
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.set_mode = sil_set_mode,
+ .mode_filter = ata_pci_default_filter,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
@@ -207,7 +208,7 @@ static const struct ata_port_operations sil_ops = {
.irq_on = ata_irq_on,
.scr_read = sil_scr_read,
.scr_write = sil_scr_write,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct ata_port_info sil_port_info[] = {
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index a01260a..a8adef9 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -116,6 +116,7 @@ static const struct ata_port_operations sis_ops = {
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
+ .mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
@@ -124,7 +125,7 @@ static const struct ata_port_operations sis_ops = {
.irq_on = ata_irq_on,
.scr_read = sis_scr_read,
.scr_write = sis_scr_write,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct ata_port_info sis_port_info = {
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 840d1c4..5ee0abb 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -362,6 +362,7 @@ static const struct ata_port_operations k2_sata_ops = {
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
+ .mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
@@ -370,7 +371,7 @@ static const struct ata_port_operations k2_sata_ops = {
.irq_on = ata_irq_on,
.scr_read = k2_sata_scr_read,
.scr_write = k2_sata_scr_write,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct ata_port_info k2_port_info[] = {
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index e710e71..f7fc045 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -108,6 +108,7 @@ static const struct ata_port_operations uli_ops = {
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
+ .mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
@@ -119,7 +120,7 @@ static const struct ata_port_operations uli_ops = {
.scr_read = uli_scr_read,
.scr_write = uli_scr_write,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct ata_port_info uli_port_info = {
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index c0e0f1d..f66ffd7 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -118,6 +118,8 @@ static struct scsi_host_template svia_sht = {
};
static const struct ata_port_operations vt6420_sata_ops = {
+ .mode_filter = ata_pci_default_filter,
+
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
@@ -141,12 +143,13 @@ static const struct ata_port_operations vt6420_sata_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct ata_port_operations vt6421_pata_ops = {
.set_piomode = vt6421_set_pio_mode,
.set_dmamode = vt6421_set_dma_mode,
+ .mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -172,10 +175,12 @@ static const struct ata_port_operations vt6421_pata_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct ata_port_operations vt6421_sata_ops = {
+ .mode_filter = ata_pci_default_filter,
+
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
@@ -195,7 +200,6 @@ static const struct ata_port_operations vt6421_sata_ops = {
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_sata,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
@@ -203,7 +207,7 @@ static const struct ata_port_operations vt6421_sata_ops = {
.scr_read = svia_scr_read,
.scr_write = svia_scr_write,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static const struct ata_port_info vt6420_port_info = {
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 95ae3ed..099a2ba 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -331,6 +331,7 @@ static const struct ata_port_operations vsc_sata_ops = {
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
+ .mode_filter = ata_pci_default_filter,
.freeze = vsc_freeze,
.thaw = vsc_thaw,
.error_handler = ata_bmdma_error_handler,
@@ -339,7 +340,7 @@ static const struct ata_port_operations vsc_sata_ops = {
.irq_on = ata_irq_on,
.scr_read = vsc_sata_scr_read,
.scr_write = vsc_sata_scr_write,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
--
1.5.2.4
next prev parent reply other threads:[~2008-03-11 12:06 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-11 12:05 [PATCHSET] libata: clean up scsi_host_templates and ata_port_operations, take #3 Tejun Heo
2008-03-11 12:05 ` [PATCH 1/9] libata: reorganize ata_port_operations Tejun Heo
2008-03-11 12:05 ` [PATCH 2/9] libata: implement and use ata_noop_irq_clear() Tejun Heo
2008-03-11 12:05 ` Tejun Heo [this message]
2008-03-11 12:06 ` [PATCH 4/9] libata: implement and use SHT initializers Tejun Heo
2008-03-11 12:06 ` [PATCH 5/9] libata: implement and use ops inheritance Tejun Heo
2008-03-11 12:06 ` [PATCH 6/9] libata: make ata_pci_init_one() not use ops->irq_handler and pi->sht Tejun Heo
2008-03-11 12:06 ` [PATCH 7/9] libata: stop overloading port_info->private_data Tejun Heo
2008-03-11 12:06 ` [PATCH 8/9] libata: kill port_info->sht and ->irq_handler Tejun Heo
2008-03-11 12:06 ` [PATCH 9/9] libata: make reset related methods proper port operations Tejun Heo
2008-03-11 15:09 ` [PATCHSET] libata: clean up scsi_host_templates and ata_port_operations, take #3 Mark Lord
2008-03-12 6:48 ` Tejun Heo
2008-03-17 12:28 ` Jeff Garzik
2008-03-19 5:43 ` Tejun Heo
2008-03-19 5:45 ` [PATCH] sata_promise: hardreset is broken Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12052371672468-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=alessandro.zummo@towertech \
--cc=jeff@garzik.org \
--cc=kngregertsen@norway.atmel.com \
--cc=liml@rtr.ca \
--cc=linux-ide@vger.kernel.org \
--cc=rmk@arm.linux.org.uk \
--cc=sonic.adi@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).