From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, linux-ide@vger.kernel.org, liml@rtr.ca
Cc: Tejun Heo <htejun@gmail.com>, Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: [PATCH 3/4] libata: kill unused ata_flush_cache()
Date: Thu, 27 Mar 2008 19:14:25 +0900 [thread overview]
Message-ID: <12066128663976-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <12066128663306-git-send-email-htejun@gmail.com>
ata_flush_code() hasn't been in use for quite some time now. Kill it.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
---
drivers/ata/libata-core.c | 26 --------------------------
drivers/ata/libata.h | 1 -
2 files changed, 0 insertions(+), 27 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 1a8601f..aba9a71 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6475,32 +6475,6 @@ int ata_link_offline(struct ata_link *link)
return 0;
}
-int ata_flush_cache(struct ata_device *dev)
-{
- unsigned int err_mask;
- u8 cmd;
-
- if (!ata_try_flush_cache(dev))
- return 0;
-
- if (dev->flags & ATA_DFLAG_FLUSH_EXT)
- cmd = ATA_CMD_FLUSH_EXT;
- else
- cmd = ATA_CMD_FLUSH;
-
- /* This is wrong. On a failed flush we get back the LBA of the lost
- sector and we should (assuming it wasn't aborted as unknown) issue
- a further flush command to continue the writeback until it
- does not error */
- err_mask = ata_do_simple_cmd(dev, cmd);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to flush cache\n");
- return -EIO;
- }
-
- return 0;
-}
-
#ifdef CONFIG_PM
static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
unsigned int action, unsigned int ehi_flags,
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 20edee0..e48d17f 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -96,7 +96,6 @@ extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
extern void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
-extern int ata_flush_cache(struct ata_device *dev);
extern void ata_dev_init(struct ata_device *dev);
extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
extern int sata_link_init_spd(struct ata_link *link);
--
1.5.2.4
next prev parent reply other threads:[~2008-03-27 10:14 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-27 10:14 [PATCHSET #upstream] libata: improve FLUSH error handling Tejun Heo
2008-03-27 10:14 ` [PATCH 1/4] libata: make ata_tf_to_lba[48]() generic Tejun Heo
2008-04-04 7:45 ` Jeff Garzik
2008-03-27 10:14 ` [PATCH 2/4] libata: implement ATA_QCFLAG_RETRY Tejun Heo
2008-03-27 10:14 ` Tejun Heo [this message]
2008-03-27 10:14 ` [PATCH 4/4] libata: improve FLUSH error handling Tejun Heo
2008-04-04 7:46 ` Jeff Garzik
2008-03-27 10:23 ` Debug patch to induce errors on FLUSH Tejun Heo
2008-03-27 14:24 ` [PATCHSET #upstream] libata: improve FLUSH error handling Mark Lord
2008-03-27 14:35 ` Mark Lord
2008-03-27 15:31 ` Alan Cox
2008-03-27 18:01 ` Ric Wheeler
2008-03-28 1:57 ` Tejun Heo
2008-03-28 2:33 ` Mark Lord
2008-03-28 13:36 ` Ric Wheeler
2008-03-28 14:52 ` Tejun Heo
2008-03-28 14:53 ` Ric Wheeler
2008-03-28 15:16 ` Alan Cox
2008-03-28 16:57 ` Ric Wheeler
2008-03-28 16:04 ` Mark Lord
2008-03-27 17:53 ` Ric Wheeler
2008-03-27 18:52 ` Jeff Garzik
2008-03-27 20:23 ` Ric Wheeler
2008-03-28 7:46 ` Andi Kleen
2008-03-28 8:30 ` Tejun Heo
2008-03-28 8:48 ` Andi Kleen
2008-03-28 8:53 ` Tejun Heo
2008-03-27 17:51 ` Ric Wheeler
2008-03-27 18:53 ` Jeff Garzik
2008-03-27 22:00 ` Alan Cox
2008-03-28 2:02 ` Tejun Heo
2008-03-28 9:48 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12066128663976-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jeff@garzik.org \
--cc=liml@rtr.ca \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).