[PATCH 08/10] libata: don't schedule LPM action seperately during probing

[Tejun Heo <htejun@gmail.com>]

There's no reason to schedule LPM action after probing is complete
causing another EH iteration.  Just schedule it together with probing
itself.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-core.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ffc689d..a12a27e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5615,7 +5615,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 			spin_lock_irqsave(ap->lock, flags);
 
 			ehi->probe_mask |= ATA_ALL_DEVICES;
-			ehi->action |= ATA_EH_RESET;
+			ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
 			ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
 
 			ap->pflags &= ~ATA_PFLAG_INITIALIZING;
@@ -5648,7 +5648,6 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 		struct ata_port *ap = host->ports[i];
 
 		ata_scsi_scan_host(ap, 1);
-		ata_lpm_schedule(ap, ap->pm_policy);
 	}
 
 	return 0;
-- 
1.5.2.4