linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Borislav Petkov <petkovbb@googlemail.com>
To: bzolnier@gmail.com
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
	Borislav Petkov <petkovbb@gmail.com>
Subject: [PATCH 08/18] ide-cd: simplify request issuing path
Date: Thu, 12 Jun 2008 08:41:00 +0200	[thread overview]
Message-ID: <1213252870-20474-9-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1213252870-20474-1-git-send-email-petkovbb@gmail.com>

call cdrom_start_packet_command() only from the do_request()
routine. As a nice side effect, this improves code readability a bit.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-cd.c |   39 +++++++++++++++++++++------------------
 1 files changed, 21 insertions(+), 18 deletions(-)

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index e9d9363..abf9af2 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -778,14 +778,12 @@ static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive)
 	return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr);
 }
 
-static ide_startstop_t cdrom_start_seek(ide_drive_t *drive)
+static void cdrom_start_seek(ide_drive_t *drive)
 {
 	struct cdrom_info *info = drive->driver_data;
 
 	info->dma = 0;
 	info->start_seek = jiffies;
-	return cdrom_start_packet_command(drive, 0,
-					  cdrom_start_seek_continuation);
 }
 
 /*
@@ -1160,8 +1158,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
 	if (write)
 		cd->devinfo.media_written = 1;
 
-	/* start sending the read/write request to the drive */
-	return cdrom_start_packet_command(drive, 32768, cdrom_start_rw_cont);
+	return ide_started;
 }
 
 static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
@@ -1174,7 +1171,7 @@ static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
 	return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
 }
 
-static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
+static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
 {
 	struct cdrom_info *info = drive->driver_data;
 
@@ -1202,10 +1199,6 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
 		if ((rq->data_len & 15) || (addr & mask))
 			info->dma = 0;
 	}
-
-	/* start sending the command to the drive */
-	return cdrom_start_packet_command(drive, rq->data_len,
-					  cdrom_do_newpc_cont);
 }
 
 /*
@@ -1214,8 +1207,9 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
 static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 					sector_t block)
 {
-	ide_startstop_t action;
 	struct cdrom_info *info = drive->driver_data;
+	ide_handler_t *fn;
+	int xferlen;
 
 	if (blk_fs_request(rq)) {
 		if (info->cd_flags & IDE_CD_FLAG_SEEKING) {
@@ -1235,16 +1229,23 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 		}
 		if (rq_data_dir(rq) == READ &&
 		    IDE_LARGE_SEEK(info->last_block, block,
-				   IDECD_SEEK_THRESHOLD) &&
-		    drive->dsc_overlap)
-			action = cdrom_start_seek(drive);
-		else
-			action = cdrom_start_rw(drive, rq);
+			    IDECD_SEEK_THRESHOLD) &&
+		    drive->dsc_overlap) {
+			xferlen = 0;
+			fn = cdrom_start_seek_continuation;
+			cdrom_start_seek(drive);
+		} else {
+			xferlen = 32768;
+			fn = cdrom_start_rw_cont;
+			if (cdrom_start_rw(drive, rq) == ide_stopped)
+				return ide_stopped;
+		}
 		info->last_block = block;
-		return action;
 	} else if (blk_sense_request(rq) || blk_pc_request(rq) ||
 		   rq->cmd_type == REQ_TYPE_ATA_PC) {
-		return cdrom_do_block_pc(drive, rq);
+		xferlen = rq->data_len;
+		fn = cdrom_do_newpc_cont;
+		cdrom_do_block_pc(drive, rq);
 	} else if (blk_special_request(rq)) {
 		/* right now this can only be a reset... */
 		cdrom_end_request(drive, 1);
@@ -1254,6 +1255,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 		cdrom_end_request(drive, 0);
 		return ide_stopped;
 	}
+
+	return cdrom_start_packet_command(drive, xferlen, fn);
 }
 
 
-- 
1.5.5.1


  parent reply	other threads:[~2008-06-12  6:41 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-12  6:40 [PATCH 00/18] misc generic ide stuff Borislav Petkov
2008-06-12  6:40 ` [PATCH 01/18] ide-cd: remove wait-for-idle-controller bit in cdrom_start_packet_command Borislav Petkov
2008-06-12  6:40 ` [PATCH 02/18] ide-cd: remove ide_cd_drain_data and ide_cd_pad_transfer Borislav Petkov
2008-06-14 17:29   ` Bartlomiej Zolnierkiewicz
2008-06-15  9:28     ` Borislav Petkov
2008-06-12  6:40 ` [PATCH 03/18] ide-cd: cdrom_decode_status: factor out block pc error handling code Borislav Petkov
2008-06-14 17:29   ` Bartlomiej Zolnierkiewicz
2008-08-15  7:34     ` Borislav Petkov
2008-08-16 20:26       ` Borislav Petkov
2008-08-15  7:34     ` Borislav Petkov
2008-06-12  6:40 ` [PATCH 04/18] ide-cd: cdrom_decode_status: factor out fs request " Borislav Petkov
2008-06-12  6:40 ` [PATCH 05/18] ide-cd: ide_do_rw_cdrom: add the catch-all bad request case to the if-else block Borislav Petkov
2008-06-12  6:40 ` [PATCH 06/18] ide-cd: cdrom_start_seek: remove unused argument block Borislav Petkov
2008-06-12  6:40 ` [PATCH 07/18] ide-cd: mv ide_do_rw_cdrom ide_cd_do_request Borislav Petkov
2008-06-12  6:41 ` Borislav Petkov [this message]
2008-06-12  6:41 ` [PATCH 09/18] ide-cd: fold cdrom_start_seek into ide_cd_do_request Borislav Petkov
2008-06-12  6:41 ` [PATCH 10/18] ide-cd: move request prep from cdrom_start_seek_continuation to rq issue path Borislav Petkov
2008-06-12  6:41 ` [PATCH 11/18] ide-cd: move request prep from cdrom_start_rw_cont " Borislav Petkov
2008-06-12  6:41 ` [PATCH 12/18] ide-cd: move request prep chunk from cdrom_do_newpc_cont " Borislav Petkov
2008-06-12  6:41 ` [PATCH 13/18] ide-floppy: replace pc->c with rq->cmd Borislav Petkov
2008-06-14 17:40   ` Bartlomiej Zolnierkiewicz
2008-06-15 10:21     ` Borislav Petkov
2008-06-15 14:57       ` Bartlomiej Zolnierkiewicz
2008-06-12  6:41 ` [PATCH 14/18] ide-floppy: fold idefloppy_create_test_unit_ready_cmd into idefloppy_open Borislav Petkov
2008-06-12  6:41 ` [PATCH 15/18] ide-floppy: zero out the whole struct ide_atapi_pc on init Borislav Petkov
2008-06-12  6:41 ` [PATCH 16/18] ide-floppy: pass rq instead of pc to idefloppy_issue_pc Borislav Petkov
2008-06-12  6:41 ` [PATCH 17/18] ide-floppy: cleanup idefloppy_create_rw_cmd Borislav Petkov
2008-06-12  6:41 ` [PATCH 18/18] ide: use flags in IRQ handler Borislav Petkov
2008-06-14 17:47   ` Bartlomiej Zolnierkiewicz
2008-06-14 17:29 ` [PATCH 00/18] misc generic ide stuff Bartlomiej Zolnierkiewicz
2008-06-15 10:27   ` Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1213252870-20474-9-git-send-email-petkovbb@gmail.com \
    --to=petkovbb@googlemail.com \
    --cc=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=petkovbb@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).