linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Borislav Petkov <petkovbb@googlemail.com>
To: bzolnier@gmail.com
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
	Borislav Petkov <petkovbb@gmail.com>
Subject: [PATCH 08/16] ide-tape: pass packet command in rq->cmd
Date: Sun, 29 Jun 2008 12:59:11 +0200	[thread overview]
Message-ID: <1214737159-1078-9-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1214737159-1078-1-git-send-email-petkovbb@gmail.com>

Make a redundant copy of the packet command bits into rq->cmd. Later, after
all drivers have been converted, it'll be switched to use that in the
common code instead of pc->c. While at it, simplify ide_tape_create_rw_cmd.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c |   19 +++++++++++--------
 1 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index efe9c51..e60faf3 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -731,6 +731,7 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	rq->cmd_flags |= REQ_PREEMPT;
 	rq->buffer = (char *) pc;
 	rq->rq_disk = tape->disk;
+	memcpy(rq->cmd, pc->c, 12);
 	ide_do_drive_cmd(drive, rq);
 }
 
@@ -952,9 +953,12 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
 }
 
 static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
-		struct ide_atapi_pc *pc, unsigned int length,
-		struct idetape_bh *bh, u8 opcode)
+				   struct ide_atapi_pc *pc, struct request *rq,
+				   u8 opcode)
 {
+	struct idetape_bh *bh = (struct idetape_bh *)rq->special;
+	unsigned int length = rq->current_nr_sectors;
+
 	idetape_init_pc(pc);
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
 	pc->c[1] = 1;
@@ -974,6 +978,8 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
 		pc->b_data = bh->b_data;
 		pc->b_count = atomic_read(&bh->b_count);
 	}
+
+	memcpy(rq->cmd, pc->c, 12);
 }
 
 static ide_startstop_t idetape_do_request(ide_drive_t *drive,
@@ -1050,16 +1056,12 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	}
 	if (rq->cmd[13] & REQ_IDETAPE_READ) {
 		pc = idetape_next_pc_storage(drive);
-		ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors,
-					(struct idetape_bh *)rq->special,
-					READ_6);
+		ide_tape_create_rw_cmd(tape, pc, rq, READ_6);
 		goto out;
 	}
 	if (rq->cmd[13] & REQ_IDETAPE_WRITE) {
 		pc = idetape_next_pc_storage(drive);
-		ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors,
-					 (struct idetape_bh *)rq->special,
-					 WRITE_6);
+		ide_tape_create_rw_cmd(tape, pc, rq, WRITE_6);
 		goto out;
 	}
 	if (rq->cmd[13] & REQ_IDETAPE_PC1) {
@@ -1282,6 +1284,7 @@ static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	rq->cmd[13] = REQ_IDETAPE_PC1;
 	rq->buffer = (char *)pc;
+	memcpy(rq->cmd, pc->c, 12);
 	error = blk_execute_rq(drive->queue, tape->disk, rq, 0);
 	blk_put_request(rq);
 	return error;
-- 
1.5.5.4


  parent reply	other threads:[~2008-06-29 10:59 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-29 10:59 [PATCH 00/16] Generic ide device flags Borislav Petkov
2008-06-29 10:59 ` [PATCH 01/16] ide: push pc callback pointer into the ide_drive_t structure Borislav Petkov
2008-06-29 10:59 ` [PATCH 02/16] ide-floppy: use drive->pc_callback instead of pc->callback Borislav Petkov
2008-06-29 10:59 ` [PATCH 03/16] ide-tape: " Borislav Petkov
2008-06-29 10:59 ` [PATCH 04/16] ide-scsi: " Borislav Petkov
2008-06-29 10:59 ` [PATCH 05/16] ide: remove pc->callback member from ide_atapi_pc Borislav Petkov
2008-06-29 10:59 ` [PATCH 06/16] ide-floppy: pass packet command in rq->cmd Borislav Petkov
2008-06-29 10:59 ` [PATCH 07/16] ide-tape: make room for packet command ids " Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov [this message]
2008-06-29 10:59 ` [PATCH 09/16] ide-scsi: pass packet command " Borislav Petkov
2008-06-29 10:59 ` [PATCH 10/16] ide: use rq->cmd instead of pc->c in atapi common code Borislav Petkov
2008-06-29 10:59 ` [PATCH 11/16] ide: add per-device flags Borislav Petkov
2008-06-29 10:59 ` [PATCH 12/16] ide-floppy: convert to using the new dev_flags Borislav Petkov
2008-06-29 10:59 ` [PATCH 13/16] ide-tape: " Borislav Petkov
2008-06-29 10:59 ` [PATCH 14/16] ide-scsi: " Borislav Petkov
2008-06-29 10:59 ` [PATCH 15/16] ide: remove unused PC_FLAG_DRQ_INTERRUPT Borislav Petkov
2008-06-29 10:59 ` [PATCH 16/16] ide-cd: convert to using the new dev_flags Borislav Petkov
2008-06-30 20:44 ` [PATCH 00/16] Generic ide device flags Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1214737159-1078-9-git-send-email-petkovbb@gmail.com \
    --to=petkovbb@googlemail.com \
    --cc=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=petkovbb@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).