From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shane Huang Subject: [PATCH] Withdraw IGN_SERR_INTERNAL for SB800 SATA Date: Tue, 18 Nov 2008 17:27:31 +0800 Message-ID: <1227000451.5631.7.camel@chunhao-desktop> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Received: from outbound-sin.frontbridge.com ([207.46.51.80]:54106 "EHLO SG2EHSOBE002.bigfish.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751365AbYKRJ1v (ORCPT ); Tue, 18 Nov 2008 04:27:51 -0500 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: jgarzik@pobox.com Cc: linux-ide@vger.kernel.org, htejun@gmail.com, shane.huang@amd.com There is an issue in ATI SB600/SB700 SATA that PxSERR.E should not be set on some conditions, which will lead to many SATA ODD error messages. commit 55a61604cd1354e1783364e1c901034f2f474b7d is the workaround. Since SB800 fixed this HW issue, IGN_SERR_INTERNAL should be withdrawn for SB800. Signed-off-by: Shane Huang diff -ruN c/drivers/ata/ahci.c d/drivers/ata/ahci.c --- c/drivers/ata/ahci.c 2008-11-07 11:23:24.000000000 +0800 +++ d/drivers/ata/ahci.c 2008-11-07 11:23:28.000000000 +0800 @@ -105,7 +105,7 @@ board_ahci_ign_iferr = 2, board_ahci_sb600 = 3, board_ahci_mv = 4, - board_ahci_sb700 = 5, + board_ahci_sb700 = 5, /* for SB700 and SB800 */ board_ahci_mcp65 = 6, board_ahci_nopmp = 7, @@ -439,7 +439,7 @@ .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_sb700 */ + /* board_ahci_sb700, for SB700 and SB800 */ { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), .flags = AHCI_FLAG_COMMON, @@ -2610,6 +2610,10 @@ (pdev->revision == 0xa1 || pdev->revision == 0xa2)) hpriv->flags |= AHCI_HFLAG_NO_MSI; + /* SB800 does NOT need the workaround to ignore SERR_INTERNAL */ + if (board_id == board_ahci_sb700 && pdev->revision >= 0x40) + hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL; + if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) pci_intx(pdev, 1);