linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Borislav Petkov <petkovbb@googlemail.com>
To: bzolnier@gmail.com
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
	Borislav Petkov <petkovbb@gmail.com>
Subject: [PATCH 3/8] ide-atapi: split drive-specific functionality in ide_issue_pc
Date: Thu, 18 Dec 2008 08:40:47 +0100	[thread overview]
Message-ID: <1229586052-3542-4-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1229586052-3542-1-git-send-email-petkovbb@gmail.com>

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c |   36 ++++++++++++++++++++----------------
 1 files changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 5295b26..2577782 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -565,39 +565,43 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 
 ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout)
 {
-	struct ide_atapi_pc *pc = drive->pc;
+	struct ide_atapi_pc *pc;
 	ide_hwif_t *hwif = drive->hwif;
 	ide_expiry_t *expiry = NULL;
 	u32 tf_flags;
 	u16 bcount;
 
-	/* We haven't transferred any data yet */
-	pc->xferred = 0;
-	pc->cur_pos = pc->buf;
-
 	if (dev_is_idecd(drive)) {
 		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
 		bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
 		expiry = ide_cd_expiry;
+
+		if (drive->dma)
+			drive->dma = !hwif->dma_ops->dma_setup(drive);
 	} else {
+		pc = drive->pc;
+
+		/* We haven't transferred any data yet */
+		pc->xferred = 0;
+		pc->cur_pos = pc->buf;
+
 		tf_flags = IDE_TFLAG_OUT_DEVICE;
 		bcount = ((drive->media == ide_tape) ?
 				pc->req_xfer :
 				min(pc->req_xfer, 63 * 1024));
-	}
 
-	if (pc->flags & PC_FLAG_DMA_ERROR) {
-		pc->flags &= ~PC_FLAG_DMA_ERROR;
-		ide_dma_off(drive);
-	}
+		if (pc->flags & PC_FLAG_DMA_ERROR) {
+			pc->flags &= ~PC_FLAG_DMA_ERROR;
+			ide_dma_off(drive);
+		}
 
-	if (((pc->flags & PC_FLAG_DMA_OK) &&
-		(drive->dev_flags & IDE_DFLAG_USING_DMA)) ||
-	    drive->dma)
-		drive->dma = !hwif->dma_ops->dma_setup(drive);
+		if ((pc->flags & PC_FLAG_DMA_OK) &&
+		     (drive->dev_flags & IDE_DFLAG_USING_DMA))
+			drive->dma = !hwif->dma_ops->dma_setup(drive);
 
-	if (!drive->dma)
-		pc->flags &= ~PC_FLAG_DMA_OK;
+		if (!drive->dma)
+			pc->flags &= ~PC_FLAG_DMA_OK;
+	}
 
 	ide_pktcmd_tf_load(drive, tf_flags, bcount, drive->dma);
 
-- 
1.6.0.4


  parent reply	other threads:[~2008-12-18  7:41 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-18  7:40 [PATCH 0/8] ide-cd: first conversion batch Borislav Petkov
2008-12-18  7:40 ` [PATCH 1/8] ide-atapi: compute cmd_len based on device type in ide_transfer_pc Borislav Petkov
2008-12-18  7:40 ` [PATCH 2/8] ide-atapi: assign expiry and timeout based on device type Borislav Petkov
2008-12-21 19:06   ` Bartlomiej Zolnierkiewicz
2008-12-18  7:40 ` Borislav Petkov [this message]
2008-12-18  7:40 ` [PATCH 4/8] ide-cd: remove xferlen arg to cdrom_start_packet_command Borislav Petkov
2008-12-18  7:40 ` [PATCH 5/8] ide-cd: remove handler wrappers Borislav Petkov
2008-12-21 19:15   ` Bartlomiej Zolnierkiewicz
2008-12-18  7:40 ` [PATCH 6/8] ide-atapi: remove timeout arg to ide_issue_pc Borislav Petkov
2008-12-18  7:40 ` [PATCH 7/8] ide-atapi: put the rest of non-ide-cd code into the else-clause of ide_transfer_pc Borislav Petkov
2008-12-18  7:40 ` [PATCH 8/8] ide-atapi: start dma in a drive-specific way Borislav Petkov
2008-12-19 20:15 ` [PATCH 0/8] ide-cd: first conversion batch Bartlomiej Zolnierkiewicz
2008-12-19 21:19   ` Borislav Petkov
2008-12-20  6:28   ` Borislav Petkov
2008-12-21 19:05     ` Bartlomiej Zolnierkiewicz
2008-12-26 13:45       ` Borislav Petkov
2008-12-29 18:57         ` Bartlomiej Zolnierkiewicz
2008-12-26 13:46       ` Borislav Petkov
2008-12-26 13:46       ` Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1229586052-3542-4-git-send-email-petkovbb@gmail.com \
    --to=petkovbb@googlemail.com \
    --cc=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=petkovbb@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).