linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Harvey Harrison <harvey.harrison@gmail.com>
To: benh <benh@kernel.crashing.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>,
	LKML <linux-kernel@vger.kernel.org>,
	linux-ide@vger.kernel.org,
	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: Re: BUG in latest GIT 2.6.28-0658-g637b180
Date: Wed, 07 Jan 2009 12:37:17 -0800	[thread overview]
Message-ID: <1231360637.5586.27.camel@brick> (raw)
In-Reply-To: <200901072115.40148.bzolnier@gmail.com>

Ben,

Ben, Is this related to the IDE 'splat' you saw yesterday?

Harvey

On Wed, 2009-01-07 at 21:15 +0100, Bartlomiej Zolnierkiewicz wrote:
> On Wednesday 07 January 2009, Larry Finger wrote:
> > The latest GIT generates the following BUG.
> > 
> > 
> > BUG: sleeping function called from invalid context at mm/slab.c:3046
> > in_atomic(): 0, irqs_disabled(): 1, pid: 523, name: modprobe
> > no locks held by modprobe/523.
> > irq event stamp: 17802
> > hardirqs last  enabled at (17801): [<ffffffff8045dd99>]
> > _spin_unlock_irqrestore+0x44/0x4c
> > hardirqs last disabled at (17802): [<ffffffffa00a4792>]
> > ide_probe_port+0x6c/0x469 [ide_core]
> > softirqs last  enabled at (17796): [<ffffffff802431f3>]
> > __do_softirq+0x159/0x166
> > softirqs last disabled at (17789): [<ffffffff8020d4bc>]
> > call_softirq+0x1c/0x28
> > Pid: 523, comm: modprobe Not tainted 2.6.28-Linus-06858-g637b180 #31
> > Call Trace:
> >  [<ffffffff8025dbdd>] ? print_irqtrace_events+0xd0/0xd4
> >  [<ffffffff80236bcd>] __might_sleep+0xf9/0xfb
> >  [<ffffffff802b5469>] kmem_cache_alloc+0x2d/0x142
> >  [<ffffffffa00a489b>] ide_probe_port+0x175/0x469 [ide_core]
> >  [<ffffffffa00a5750>] ide_host_register+0x2b8/0x611 [ide_core]
> >  [<ffffffffa00a8526>] ? do_ide_setup_pci_device+0x70/0xd3 [ide_core]
> >  [<ffffffffa00a8f1d>] ide_pci_init_one+0xcc/0xee [ide_core]
> >  [<ffffffff8025e852>] ? trace_hardirqs_off+0xd/0xf
> >  [<ffffffff8045dd92>] ? _spin_unlock_irqrestore+0x3d/0x4c
> >  [<ffffffff8023e3ec>] ? release_console_sem+0x1b0/0x1e5
> >  [<ffffffff8045aac8>] ? printk+0x41/0x49
> >  [<ffffffffa00bf604>] amd74xx_probe+0x13e/0x145 [amd74xx]
> >  [<ffffffffa00bf340>] ? init_chipset_amd74xx+0x0/0x160 [amd74xx]
> >  [<ffffffffa00bf4a0>] ? init_hwif_amd74xx+0x0/0x26 [amd74xx]
> >  [<ffffffff80345fb6>] pci_device_probe+0xc6/0x11d
> >  [<ffffffff803b7f1d>] driver_probe_device+0xc3/0x168
> >  [<ffffffff803b801f>] __driver_attach+0x5d/0x80
> >  [<ffffffff803b7fc2>] ? __driver_attach+0x0/0x80
> >  [<ffffffff803b7794>] bus_for_each_dev+0x59/0x90
> >  [<ffffffff803b7d60>] driver_attach+0x21/0x23
> >  [<ffffffff803b703b>] bus_add_driver+0xbf/0x20c
> >  [<ffffffff803b822e>] driver_register+0xb0/0x130
> >  [<ffffffff8034628d>] __pci_register_driver+0x68/0xa3
> >  [<ffffffffa0023000>] ? amd74xx_ide_init+0x0/0x20 [amd74xx]
> >  [<ffffffffa002301e>] amd74xx_ide_init+0x1e/0x20 [amd74xx]
> >  [<ffffffff8020905b>] _stext+0x5b/0x135
> >  [<ffffffff802561b0>] ? __blocking_notifier_call_chain+0x5d/0x6f
> >  [<ffffffff8026af0c>] sys_init_module+0xb0/0x1d3
> >  [<ffffffff8020c2cb>] system_call_fastpath+0x16/0x1b
> 
> Fix below.  Thanks again Larry!
> 
> [ I now always run with LOCKDEP=y but the issue was probably hidden by the
>   ide_probe_port() IRQ masking cleanup (http://lkml.org/lkml/2009/1/6/267)
>   so I didn't catch it before push to Linus... ]
> 
> From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Subject: [PATCH] ide: fix accidental LOCKDEP breakage caused by local_irq_set() removal
> 
> commit 54cc1428cfa619e16d75baae8cb041a2eff015f0 ("ide: remove
> local_irq_set() macro") accidentally replaced local_save_flags()
> by local_irq_set() in ide_probe_port() and __ide_wait_stat()
> which resulted in LOCKDEP breakage.
> 
> Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> ---
>  drivers/ide/ide-iops.c  |    2 +-
>  drivers/ide/ide-probe.c |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> Index: b/drivers/ide/ide-iops.c
> ===================================================================
> --- a/drivers/ide/ide-iops.c
> +++ b/drivers/ide/ide-iops.c
> @@ -493,7 +493,7 @@ static int __ide_wait_stat(ide_drive_t *
>  	stat = tp_ops->read_status(hwif);
>  
>  	if (stat & ATA_BUSY) {
> -		local_irq_save(flags);
> +		local_save_flags(flags);
>  		local_irq_enable_in_hardirq();
>  		timeout += jiffies;
>  		while ((stat = tp_ops->read_status(hwif)) & ATA_BUSY) {
> Index: b/drivers/ide/ide-probe.c
> ===================================================================
> --- a/drivers/ide/ide-probe.c
> +++ b/drivers/ide/ide-probe.c
> @@ -796,7 +796,7 @@ static int ide_probe_port(ide_hwif_t *hw
>  	if (irqd)
>  		disable_irq(hwif->irq);
>  
> -	local_irq_save(flags);
> +	local_save_flags(flags);
>  	local_irq_enable_in_hardirq();
>  
>  	if (ide_port_wait_ready(hwif) == -EBUSY)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/


  reply	other threads:[~2009-01-07 20:37 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-07  5:06 BUG in latest GIT 2.6.28-0658-g637b180 Larry Finger
2009-01-07 20:15 ` Bartlomiej Zolnierkiewicz
2009-01-07 20:37   ` Harvey Harrison [this message]
2009-01-08  4:50     ` Benjamin Herrenschmidt
2009-01-07 21:01   ` Larry Finger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1231360637.5586.27.camel@brick \
    --to=harvey.harrison@gmail.com \
    --cc=Larry.Finger@lwfinger.net \
    --cc=benh@kernel.crashing.org \
    --cc=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).