From: Tejun Heo <tj@kernel.org>
To: petkovbb@googlemail.com, bzolnier@gmail.com, axboe@kernel.dk,
linux-ide@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 15/15] ide-pm: don't abuse rq->data
Date: Fri, 17 Apr 2009 18:33:22 +0900 [thread overview]
Message-ID: <1239960802-31978-16-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1239960802-31978-1-git-send-email-tj@kernel.org>
Impact: cleanup rq->data usage
ide-pm uses rq->data to carry pointer to struct request_pm_state
through request queue and rq->special is used to carray pointer to
local struct ide_cmd, which isn't necessary. Use rq->special for
request_pm_state instead and use local ide_cmd in
ide_start_power_step().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
---
drivers/ide/ide-io.c | 2 +-
drivers/ide/ide-pm.c | 38 +++++++++++++++-----------------------
2 files changed, 16 insertions(+), 24 deletions(-)
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 3245c2d..6e3094e 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -368,7 +368,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
return execute_drive_cmd(drive, rq);
else if (blk_pm_request(rq)) {
- struct request_pm_state *pm = rq->data;
+ struct request_pm_state *pm = rq->special;
#ifdef DEBUG_PM
printk("%s: start_power_step(step: %d)\n",
drive->name, pm->pm_step);
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index 0d8a151..ba1488b 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -7,7 +7,6 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg)
ide_hwif_t *hwif = drive->hwif;
struct request *rq;
struct request_pm_state rqpm;
- struct ide_cmd cmd;
int ret;
/* call ACPI _GTM only once */
@@ -15,11 +14,9 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg)
ide_acpi_get_timing(hwif);
memset(&rqpm, 0, sizeof(rqpm));
- memset(&cmd, 0, sizeof(cmd));
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_PM_SUSPEND;
- rq->special = &cmd;
- rq->data = &rqpm;
+ rq->special = &rqpm;
rqpm.pm_step = IDE_PM_START_SUSPEND;
if (mesg.event == PM_EVENT_PRETHAW)
mesg.event = PM_EVENT_FREEZE;
@@ -41,7 +38,6 @@ int generic_ide_resume(struct device *dev)
ide_hwif_t *hwif = drive->hwif;
struct request *rq;
struct request_pm_state rqpm;
- struct ide_cmd cmd;
int err;
/* call ACPI _PS0 / _STM only once */
@@ -53,12 +49,10 @@ int generic_ide_resume(struct device *dev)
ide_acpi_exec_tfs(drive);
memset(&rqpm, 0, sizeof(rqpm));
- memset(&cmd, 0, sizeof(cmd));
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_PM_RESUME;
rq->cmd_flags |= REQ_PREEMPT;
- rq->special = &cmd;
- rq->data = &rqpm;
+ rq->special = &rqpm;
rqpm.pm_step = IDE_PM_START_RESUME;
rqpm.pm_state = PM_EVENT_ON;
@@ -77,7 +71,7 @@ int generic_ide_resume(struct device *dev)
void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
{
- struct request_pm_state *pm = rq->data;
+ struct request_pm_state *pm = rq->special;
#ifdef DEBUG_PM
printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
@@ -107,10 +101,8 @@ void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
{
- struct request_pm_state *pm = rq->data;
- struct ide_cmd *cmd = rq->special;
-
- memset(cmd, 0, sizeof(*cmd));
+ struct request_pm_state *pm = rq->special;
+ struct ide_cmd cmd = { };
switch (pm->pm_step) {
case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
@@ -123,12 +115,12 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
return ide_stopped;
}
if (ata_id_flush_ext_enabled(drive->id))
- cmd->tf.command = ATA_CMD_FLUSH_EXT;
+ cmd.tf.command = ATA_CMD_FLUSH_EXT;
else
- cmd->tf.command = ATA_CMD_FLUSH;
+ cmd.tf.command = ATA_CMD_FLUSH;
goto out_do_tf;
case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
- cmd->tf.command = ATA_CMD_STANDBYNOW1;
+ cmd.tf.command = ATA_CMD_STANDBYNOW1;
goto out_do_tf;
case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
ide_set_max_pio(drive);
@@ -141,7 +133,7 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
ide_complete_power_step(drive, rq);
return ide_stopped;
case IDE_PM_IDLE: /* Resume step 2 (idle) */
- cmd->tf.command = ATA_CMD_IDLEIMMEDIATE;
+ cmd.tf.command = ATA_CMD_IDLEIMMEDIATE;
goto out_do_tf;
case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */
/*
@@ -163,11 +155,11 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
return ide_stopped;
out_do_tf:
- cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd->valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
- cmd->protocol = ATA_PROT_NODATA;
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
+ cmd.protocol = ATA_PROT_NODATA;
- return do_rw_taskfile(drive, cmd);
+ return do_rw_taskfile(drive, &cmd);
}
/**
@@ -181,7 +173,7 @@ out_do_tf:
void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
{
struct request_queue *q = drive->queue;
- struct request_pm_state *pm = rq->data;
+ struct request_pm_state *pm = rq->special;
unsigned long flags;
ide_complete_power_step(drive, rq);
@@ -207,7 +199,7 @@ void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
{
- struct request_pm_state *pm = rq->data;
+ struct request_pm_state *pm = rq->special;
if (blk_pm_suspend_request(rq) &&
pm->pm_step == IDE_PM_START_SUSPEND)
--
1.6.0.2
next prev parent reply other threads:[~2009-04-17 9:33 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-17 9:33 [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups, take#2 Tejun Heo
2009-04-17 9:33 ` [PATCH 01/15] block: clear req->errors on bio completion only for fs requests Tejun Heo
2009-04-17 9:33 ` [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection Tejun Heo
2009-04-17 10:23 ` Borislav Petkov
2009-04-17 10:35 ` Tejun Heo
2009-04-17 10:40 ` Tejun Heo
2009-04-17 11:03 ` Borislav Petkov
2009-04-17 21:12 ` Tejun Heo
2009-04-17 21:27 ` Mark Lord
2009-04-18 19:48 ` Borislav Petkov
2009-04-18 21:39 ` Tejun Heo
2009-04-19 7:28 ` Borislav Petkov
2009-04-19 7:36 ` Tejun Heo
2009-04-18 16:51 ` Bartlomiej Zolnierkiewicz
2009-04-18 21:42 ` Tejun Heo
2009-04-17 9:33 ` [PATCH 03/15] ide: use blk_run_queue() instead of blk_start_queueing() Tejun Heo
2009-04-17 9:33 ` [PATCH 04/15] ide: don't set REQ_SOFTBARRIER Tejun Heo
2009-04-17 9:33 ` [PATCH 05/15] ide kill unused ide_cmd->special Tejun Heo
2009-04-17 9:33 ` [PATCH 06/15] ide-cd: clear sense buffer before issuing request sense Tejun Heo
2009-04-17 9:33 ` [PATCH 07/15] ide-floppy: block pc always uses bio Tejun Heo
2009-04-17 9:33 ` [PATCH 08/15] ide-taskfile: don't abuse rq->buffer Tejun Heo
2009-04-17 9:33 ` [PATCH 09/15] ide-atapi: " Tejun Heo
2009-04-17 9:33 ` [PATCH 10/15] ide-cd: " Tejun Heo
2009-04-17 9:33 ` [PATCH 11/15] ide: add helpers for preparing sense requests Tejun Heo
2009-04-17 9:33 ` [PATCH 12/15] ide-cd: convert to using generic sense request Tejun Heo
2009-04-19 9:22 ` Borislav Petkov
2009-04-19 9:28 ` Tejun Heo
2009-04-19 9:30 ` Tejun Heo
2009-04-17 9:33 ` [PATCH 13/15] ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer Tejun Heo
2009-04-17 9:33 ` [PATCH 14/15] ide-cd,atapi: use bio for internal commands Tejun Heo
2009-04-17 9:33 ` Tejun Heo [this message]
2009-04-18 16:32 ` [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups, take#2 Bartlomiej Zolnierkiewicz
2009-04-18 20:04 ` Borislav Petkov
2009-04-18 21:43 ` Tejun Heo
2009-04-18 22:04 ` [GIT PATCH " Tejun Heo
2009-04-20 11:47 ` Bartlomiej Zolnierkiewicz
2009-04-20 11:59 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1239960802-31978-16-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=axboe@kernel.dk \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=petkovbb@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).