linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tejun Heo <tj@kernel.org>
To: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org,
	linux-ide@vger.kernel.org, rusty@rustcorp.com.au,
	James.Bottomley@HansenPartnership.com, mike.miller@hp.com,
	donari75@gmail.c
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 04/18] hd: dequeue and track in-flight request
Date: Fri,  8 May 2009 11:54:02 +0900	[thread overview]
Message-ID: <1241751256-17435-5-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1241751256-17435-1-git-send-email-tj@kernel.org>

hd has at most single request in flight.  Till now, whenever it needs
to access the in-flight request it called elv_next_request().  This
patch makes hd track the in-flight request directly and dequeue it
when processing starts.  The added complexity is minimal and this will
help future block layer changes.

[ Impact: dequeue in-flight request, one elv_next_request() per request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/block/hd.c |   63 +++++++++++++++++++++++++++++++++-------------------
 1 files changed, 40 insertions(+), 23 deletions(-)

diff --git a/drivers/block/hd.c b/drivers/block/hd.c
index a3b3994..288ab63 100644
--- a/drivers/block/hd.c
+++ b/drivers/block/hd.c
@@ -98,10 +98,9 @@
 
 static DEFINE_SPINLOCK(hd_lock);
 static struct request_queue *hd_queue;
+static struct request *hd_req;
 
 #define MAJOR_NR HD_MAJOR
-#define QUEUE (hd_queue)
-#define CURRENT elv_next_request(hd_queue)
 
 #define TIMEOUT_VALUE	(6*HZ)
 #define	HD_DELAY	0
@@ -195,11 +194,24 @@ static void __init hd_setup(char *str, int *ints)
 	NR_HD = hdind+1;
 }
 
+static bool hd_end_request(int err, unsigned int bytes)
+{
+	if (__blk_end_request(hd_req, err, bytes))
+		return true;
+	hd_req = NULL;
+	return false;
+}
+
+static bool hd_end_request_cur(int err)
+{
+	return hd_end_request(err, blk_rq_cur_bytes(hd_req));
+}
+
 static void dump_status(const char *msg, unsigned int stat)
 {
 	char *name = "hd?";
-	if (CURRENT)
-		name = CURRENT->rq_disk->disk_name;
+	if (hd_req)
+		name = hd_req->rq_disk->disk_name;
 
 #ifdef VERBOSE_ERRORS
 	printk("%s: %s: status=0x%02x { ", name, msg, stat & 0xff);
@@ -227,8 +239,8 @@ static void dump_status(const char *msg, unsigned int stat)
 		if (hd_error & (BBD_ERR|ECC_ERR|ID_ERR|MARK_ERR)) {
 			printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL),
 				inb(HD_CURRENT) & 0xf, inb(HD_SECTOR));
-			if (CURRENT)
-				printk(", sector=%ld", blk_rq_pos(CURRENT));
+			if (hd_req)
+				printk(", sector=%ld", blk_rq_pos(hd_req));
 		}
 		printk("\n");
 	}
@@ -406,11 +418,12 @@ static void unexpected_hd_interrupt(void)
  */
 static void bad_rw_intr(void)
 {
-	struct request *req = CURRENT;
+	struct request *req = hd_req;
+
 	if (req != NULL) {
 		struct hd_i_struct *disk = req->rq_disk->private_data;
 		if (++req->errors >= MAX_ERRORS || (hd_error & BBD_ERR)) {
-			__blk_end_request_cur(req, -EIO);
+			hd_end_request_cur(-EIO);
 			disk->special_op = disk->recalibrate = 1;
 		} else if (req->errors % RESET_FREQ == 0)
 			reset = 1;
@@ -454,14 +467,14 @@ static void read_intr(void)
 	return;
 
 ok_to_read:
-	req = CURRENT;
+	req = hd_req;
 	insw(HD_DATA, req->buffer, 256);
 #ifdef DEBUG
 	printk("%s: read: sector %ld, remaining = %u, buffer=%p\n",
 	       req->rq_disk->disk_name, blk_rq_pos(req) + 1,
 	       blk_rq_sectors(req) - 1, req->buffer+512);
 #endif
-	if (__blk_end_request(req, 0, 512)) {
+	if (hd_end_request(0, 512)) {
 		SET_HANDLER(&read_intr);
 		return;
 	}
@@ -475,7 +488,7 @@ ok_to_read:
 
 static void write_intr(void)
 {
-	struct request *req = CURRENT;
+	struct request *req = hd_req;
 	int i;
 	int retries = 100000;
 
@@ -494,7 +507,7 @@ static void write_intr(void)
 	return;
 
 ok_to_write:
-	if (__blk_end_request(req, 0, 512)) {
+	if (hd_end_request(0, 512)) {
 		SET_HANDLER(&write_intr);
 		outsw(HD_DATA, req->buffer, 256);
 		return;
@@ -525,18 +538,18 @@ static void hd_times_out(unsigned long dummy)
 
 	do_hd = NULL;
 
-	if (!CURRENT)
+	if (!hd_req)
 		return;
 
 	spin_lock_irq(hd_queue->queue_lock);
 	reset = 1;
-	name = CURRENT->rq_disk->disk_name;
+	name = hd_req->rq_disk->disk_name;
 	printk("%s: timeout\n", name);
-	if (++CURRENT->errors >= MAX_ERRORS) {
+	if (++hd_req->errors >= MAX_ERRORS) {
 #ifdef DEBUG
 		printk("%s: too many errors\n", name);
 #endif
-		__blk_end_request_cur(CURRENT, -EIO);
+		hd_end_request_cur(-EIO);
 	}
 	hd_request();
 	spin_unlock_irq(hd_queue->queue_lock);
@@ -551,7 +564,7 @@ static int do_special_op(struct hd_i_struct *disk, struct request *req)
 	}
 	if (disk->head > 16) {
 		printk("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name);
-		__blk_end_request_cur(req, -EIO);
+		hd_end_request_cur(-EIO);
 	}
 	disk->special_op = 0;
 	return 1;
@@ -578,11 +591,15 @@ static void hd_request(void)
 repeat:
 	del_timer(&device_timer);
 
-	req = CURRENT;
-	if (!req) {
-		do_hd = NULL;
-		return;
+	if (!hd_req) {
+		hd_req = elv_next_request(hd_queue);
+		if (!hd_req) {
+			do_hd = NULL;
+			return;
+		}
+		blkdev_dequeue_request(hd_req);
 	}
+	req = hd_req;
 
 	if (reset) {
 		reset_hd();
@@ -595,7 +612,7 @@ repeat:
 	    ((block+nsect) > get_capacity(req->rq_disk))) {
 		printk("%s: bad access: block=%d, count=%d\n",
 			req->rq_disk->disk_name, block, nsect);
-		__blk_end_request_cur(req, -EIO);
+		hd_end_request_cur(-EIO);
 		goto repeat;
 	}
 
@@ -635,7 +652,7 @@ repeat:
 			break;
 		default:
 			printk("unknown hd-command\n");
-			__blk_end_request_cur(req, -EIO);
+			hd_end_request_cur(-EIO);
 			break;
 		}
 	}
-- 
1.6.0.2


  parent reply	other threads:[~2009-05-08  2:56 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-08  2:53 [GIT PATCH] block: unify request processing model and implement peek/fetch Tejun Heo
2009-05-08  2:53 ` [PATCH 01/18] ide: dequeue in-flight request Tejun Heo
2009-05-09  6:56   ` Borislav Petkov
2009-05-09 15:58   ` Bartlomiej Zolnierkiewicz
2009-05-08  2:54 ` [PATCH 02/18] mg_disk: fix queue hang / infinite retry on !fs requests Tejun Heo
2009-05-08  2:54 ` [PATCH 03/18] mg_disk: dequeue and track in-flight request Tejun Heo
2009-05-08  2:54 ` Tejun Heo [this message]
2009-05-08  2:54 ` [PATCH 05/18] ataflop: " Tejun Heo
2009-05-08  2:54 ` [PATCH 06/18] swim3: dequeue " Tejun Heo
2009-05-08  2:54 ` [PATCH 07/18] xsysace: " Tejun Heo
2009-05-08  2:54 ` [PATCH 08/18] paride: " Tejun Heo
2009-05-08  2:54 ` [PATCH 09/18] ps3disk: " Tejun Heo
2009-05-08  2:54 ` [PATCH 10/18] amiflop: " Tejun Heo
2009-05-08  2:54 ` [PATCH 11/18] swim: " Tejun Heo
2009-05-16 13:42   ` Sergei Shtylyov
2009-05-16 14:37     ` Tejun Heo
2009-05-16 19:56       ` Sergei Shtylyov
2009-05-16 22:18         ` Tejun Heo
2009-05-08  2:54 ` [PATCH 12/18] xd: " Tejun Heo
2009-05-08  2:54 ` [PATCH 13/18] mtd_blkdevs: " Tejun Heo
2009-05-08  2:54 ` [PATCH 14/18] jsflash: " Tejun Heo
2009-05-08  2:54 ` [PATCH 15/18] z2ram: " Tejun Heo
2009-05-16 12:54   ` Sergei Shtylyov
2009-05-16 19:58     ` Sergei Shtylyov
2009-05-08  2:54 ` [PATCH 16/18] gdrom: " Tejun Heo
2009-05-08 19:53   ` Adrian McMenamin
2009-05-08 23:43     ` Tejun Heo
2009-05-08  2:54 ` [PATCH 17/18] block: convert to dequeueing model (easy ones) Tejun Heo
2009-05-08  2:54 ` [PATCH 18/18] block: implement and enforce request peek/start/fetch Tejun Heo
2009-05-10 21:52   ` Bartlomiej Zolnierkiewicz
2009-05-10 11:28 ` [GIT PATCH] block: unify request processing model and implement peek/fetch Tejun Heo
2009-05-11  7:52 ` Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1241751256-17435-5-git-send-email-tj@kernel.org \
    --to=tj@kernel.org \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=donari75@gmail.c \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=mike.miller@hp.com \
    --cc=rusty@rustcorp.com.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).