From: Borislav Petkov <petkovbb@googlemail.com>
To: bzolnier@gmail.com
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 04/14] ide-atapi: add a len-parameter to ide_queue_pc_tail
Date: Sat, 9 May 2009 09:45:24 +0200 [thread overview]
Message-ID: <1241855134-4984-5-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1241855134-4984-1-git-send-email-petkovbb@gmail.com>
This is in preparation for removing ide_atapi_pc.
There should be no functional change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 12 ++++++------
drivers/ide/ide-floppy.c | 4 ++--
drivers/ide/ide-floppy_ioctl.c | 8 ++++----
drivers/ide/ide-tape.c | 26 +++++++++++++-------------
include/linux/ide.h | 3 ++-
5 files changed, 27 insertions(+), 26 deletions(-)
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 1f2af8b..27690f1 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -84,7 +84,7 @@ EXPORT_SYMBOL_GPL(ide_init_pc);
* and wait for it to be serviced.
*/
int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
- struct ide_atapi_pc *pc)
+ struct ide_atapi_pc *pc, unsigned int bufflen)
{
struct request *rq;
int error;
@@ -93,8 +93,8 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->special = (char *)pc;
- if (pc->req_xfer) {
- error = blk_rq_map_kern(drive->queue, rq, pc->buf, pc->req_xfer,
+ if (bufflen) {
+ error = blk_rq_map_kern(drive->queue, rq, pc->buf, bufflen,
GFP_NOIO);
if (error)
goto put_req;
@@ -117,7 +117,7 @@ int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk)
ide_init_pc(&pc);
pc.c[0] = TEST_UNIT_READY;
- return ide_queue_pc_tail(drive, disk, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc, 0);
}
EXPORT_SYMBOL_GPL(ide_do_test_unit_ready);
@@ -132,7 +132,7 @@ int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start)
if (drive->media == ide_tape)
pc.flags |= PC_FLAG_WAIT_FOR_DSC;
- return ide_queue_pc_tail(drive, disk, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc, 0);
}
EXPORT_SYMBOL_GPL(ide_do_start_stop);
@@ -147,7 +147,7 @@ int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on)
pc.c[0] = ALLOW_MEDIUM_REMOVAL;
pc.c[4] = on;
- return ide_queue_pc_tail(drive, disk, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc, 0);
}
EXPORT_SYMBOL_GPL(ide_set_media_lock);
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index a1c5598..5df00d4 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -318,7 +318,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
- if (ide_queue_pc_tail(drive, disk, pc)) {
+ if (ide_queue_pc_tail(drive, disk, pc, pc->req_xfer)) {
printk(KERN_ERR PFX "Can't get flexible disk page params\n");
return 1;
}
@@ -390,7 +390,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
pc.buf = &pc_buf[0];
pc.buf_size = sizeof(pc_buf);
- if (ide_queue_pc_tail(drive, disk, &pc)) {
+ if (ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer)) {
printk(KERN_ERR PFX "Can't get floppy parameters\n");
return 1;
}
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index cd8a420..75f1d50 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -50,7 +50,7 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive,
pc->buf = &pc_buf[0];
pc->buf_size = sizeof(pc_buf);
- if (ide_queue_pc_tail(drive, floppy->disk, pc)) {
+ if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->req_xfer)) {
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
return -EIO;
}
@@ -124,7 +124,7 @@ static int ide_floppy_get_sfrp_bit(ide_drive_t *drive, struct ide_atapi_pc *pc)
ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_CAPABILITIES_PAGE);
pc->flags |= PC_FLAG_SUPPRESS_ERROR;
- if (ide_queue_pc_tail(drive, floppy->disk, pc))
+ if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->req_xfer))
return 1;
if (pc->buf[8 + 2] & 0x40)
@@ -172,7 +172,7 @@ static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc,
ide_floppy_get_sfrp_bit(drive, pc);
ide_floppy_create_format_unit_cmd(pc, blocks, length, flags);
- if (ide_queue_pc_tail(drive, floppy->disk, pc))
+ if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->req_xfer))
err = -EIO;
out:
@@ -200,7 +200,7 @@ static int ide_floppy_get_format_progress(ide_drive_t *drive,
if (drive->atapi_flags & IDE_AFLAG_SRFP) {
ide_create_request_sense_cmd(drive, pc);
- if (ide_queue_pc_tail(drive, floppy->disk, pc))
+ if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->req_xfer))
return -EIO;
if (floppy->sense_key == 2 &&
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 35c188a..e17fd47 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -769,7 +769,7 @@ static int idetape_flush_tape_buffers(ide_drive_t *drive)
int rc;
idetape_create_write_filemark_cmd(drive, &pc, 0);
- rc = ide_queue_pc_tail(drive, tape->disk, &pc);
+ rc = ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer);
if (rc)
return rc;
idetape_wait_ready(drive, 60 * 5 * HZ);
@@ -792,7 +792,7 @@ static int idetape_read_position(ide_drive_t *drive)
debug_log(DBG_PROCS, "Enter %s\n", __func__);
idetape_create_read_position_cmd(&pc);
- if (ide_queue_pc_tail(drive, tape->disk, &pc))
+ if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer))
return -1;
position = tape->first_frame;
return position;
@@ -845,12 +845,12 @@ static int idetape_position_tape(ide_drive_t *drive, unsigned int block,
__ide_tape_discard_merge_buffer(drive);
idetape_wait_ready(drive, 60 * 5 * HZ);
idetape_create_locate_cmd(drive, &pc, block, partition, skip);
- retval = ide_queue_pc_tail(drive, disk, &pc);
+ retval = ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
if (retval)
return (retval);
idetape_create_read_position_cmd(&pc);
- return ide_queue_pc_tail(drive, disk, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
}
static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
@@ -1046,12 +1046,12 @@ static int idetape_rewind_tape(ide_drive_t *drive)
debug_log(DBG_SENSE, "Enter %s\n", __func__);
idetape_create_rewind_cmd(drive, &pc);
- retval = ide_queue_pc_tail(drive, disk, &pc);
+ retval = ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
if (retval)
return retval;
idetape_create_read_position_cmd(&pc);
- retval = ide_queue_pc_tail(drive, disk, &pc);
+ retval = ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
if (retval)
return retval;
return 0;
@@ -1119,7 +1119,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
case MTBSF:
idetape_create_space_cmd(&pc, mt_count - count,
IDETAPE_SPACE_OVER_FILEMARK);
- return ide_queue_pc_tail(drive, disk, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
case MTFSFM:
case MTBSFM:
if (!sprev)
@@ -1258,7 +1258,7 @@ static int idetape_write_filemark(ide_drive_t *drive)
/* Write a filemark */
idetape_create_write_filemark_cmd(drive, &pc, 1);
- if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer)) {
printk(KERN_ERR "ide-tape: Couldn't write a filemark\n");
return -EIO;
}
@@ -1343,11 +1343,11 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
case MTEOM:
idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
- return ide_queue_pc_tail(drive, disk, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
case MTERASE:
(void)idetape_rewind_tape(drive);
idetape_create_erase_cmd(&pc);
- return ide_queue_pc_tail(drive, disk, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
case MTSETBLK:
if (mt_count) {
if (mt_count < tape->blk_size ||
@@ -1456,7 +1456,7 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
struct ide_atapi_pc pc;
idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
- if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer)) {
printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
if (tape->blk_size == 0) {
printk(KERN_WARNING "ide-tape: Cannot deal with zero "
@@ -1612,7 +1612,7 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
pc.buf = &pc_buf[0];
pc.buf_size = sizeof(pc_buf);
- if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer)) {
printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
tape->name);
return;
@@ -1641,7 +1641,7 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
u8 speed, max_speed;
idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE);
- if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer)) {
printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
" some default values\n");
tape->blk_size = 512;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 745a393..7e15bd1 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1160,7 +1160,8 @@ enum {
REQ_IDETAPE_WRITE = (1 << 3),
};
-int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *);
+int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
+ unsigned int);
int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
--
1.6.2.4
next prev parent reply other threads:[~2009-05-09 7:45 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-09 7:45 [RFC PATCH 0/12] ide-atapi remove pc->buf Borislav Petkov
2009-05-09 7:45 ` [PATCH 01/14] ide-tape: fix potential fs requests bug Borislav Petkov
2009-05-09 8:02 ` Sam Ravnborg
2009-05-09 8:50 ` Borislav Petkov
2009-05-09 10:25 ` Sam Ravnborg
2009-05-09 12:09 ` Borislav Petkov
2009-05-09 7:45 ` [PATCH 02/14] ide-atapi: switch to blk_rq_bytes() on do_request() path Borislav Petkov
2009-05-10 21:32 ` Bartlomiej Zolnierkiewicz
2009-05-09 7:45 ` [PATCH 03/14] ide-atapi: switch to rq->resid_len Borislav Petkov
2009-05-10 21:32 ` Bartlomiej Zolnierkiewicz
2009-05-11 7:23 ` Borislav Petkov
2009-05-11 11:22 ` Bartlomiej Zolnierkiewicz
2009-05-12 14:38 ` Sergei Shtylyov
2009-05-09 7:45 ` Borislav Petkov [this message]
2009-05-09 7:45 ` [PATCH 05/14] ide-atapi: add a buffer-arg to ide_queue_pc_tail Borislav Petkov
2009-05-10 21:32 ` Bartlomiej Zolnierkiewicz
2009-05-09 7:45 ` [PATCH 06/14] ide-floppy/ide_floppy_get_flexible_disk_page: use local buffer Borislav Petkov
2009-05-09 7:45 ` [PATCH 07/14] ide-floppy/ide_floppy_get_sfrp_bit: " Borislav Petkov
2009-05-09 7:45 ` [PATCH 08/14] ide-floppy/ide_floppy_format_unit: " Borislav Petkov
2009-05-09 7:45 ` [PATCH 09/14] ide-atapi: use local sense buffer Borislav Petkov
2009-05-10 21:32 ` Bartlomiej Zolnierkiewicz
2009-05-12 7:17 ` Borislav Petkov
2009-05-09 7:45 ` [PATCH 10/14] ide-tape: fix READ POSITION cmd handling Borislav Petkov
2009-05-09 7:45 ` [PATCH 11/14] ide-tape/ide_tape_get_bsize_from_bdesc: use local buffer Borislav Petkov
2009-05-09 7:45 ` [PATCH 12/14] ide-atapi: remove pc->buf Borislav Petkov
2009-05-09 7:45 ` [PATCH 13/14] ide-cd: use whole request_sense buffer in EH Borislav Petkov
2009-05-09 7:45 ` [PATCH 14/14] ide: unify interrupt reason checking Borislav Petkov
2009-05-10 21:39 ` Bartlomiej Zolnierkiewicz
2009-05-10 21:32 ` [RFC PATCH 0/12] ide-atapi remove pc->buf Bartlomiej Zolnierkiewicz
2009-05-10 23:30 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1241855134-4984-5-git-send-email-petkovbb@gmail.com \
--to=petkovbb@googlemail.com \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).