From: Shane Huang <shane.huang@amd.com>
To: jgarzik@pobox.com, tj@kernel.org
Cc: linux-ide@vger.kernel.org, "Huang, Shane" <Shane.Huang@amd.com>
Subject: RE: [PATCH] Add AMD SB900 SATA/IDE controller device IDs
Date: Wed, 29 Jul 2009 11:34:49 +0800 [thread overview]
Message-ID: <1248838489.3470.7.camel@zm-desktop> (raw)
Update the patch with Tejun's request to add RAID comment.
=== CUT HERE ===
Add AMD SB900 SATA/IDE controller device IDs.
Signed-off-by: Shane Huang <shane.huang@amd.com>
diff -ruN a/drivers/ata/ahci.c b/drivers/ata/ahci.c
--- a/drivers/ata/ahci.c 2009-07-27 18:55:43.000000000 +0800
+++ b/drivers/ata/ahci.c 2009-07-28 16:50:20.000000000 +0800
@@ -533,6 +533,12 @@
{ PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
+ /* AMD */
+ { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD SB900 */
+ /* AMD is using RAID class only for ahci controllers */
+ { PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
+
/* VIA */
{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
diff -ruN a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
--- a/drivers/ata/pata_atiixp.c 2009-07-27 18:55:56.000000000 +0800
+++ b/drivers/ata/pata_atiixp.c 2009-07-27 18:56:01.000000000 +0800
@@ -245,6 +245,7 @@
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), },
{ },
};
diff -ruN a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c
--- a/drivers/ide/atiixp.c 2009-07-27 18:57:07.000000000 +0800
+++ b/drivers/ide/atiixp.c 2009-07-27 18:57:12.000000000 +0800
@@ -177,6 +177,7 @@
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
diff -ruN a/drivers/pci/quirks.c b/drivers/pci/quirks.c
--- a/drivers/pci/quirks.c 2009-07-27 18:56:41.000000000 +0800
+++ b/drivers/pci/quirks.c 2009-07-27 18:56:46.000000000 +0800
@@ -992,7 +992,7 @@
static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
{
- /* set sb600/sb700/sb800 sata to ahci mode */
+ /* set SBX00 SATA in IDE mode to AHCI mode */
u8 tmp;
pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp);
@@ -1011,6 +1011,8 @@
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode);
/*
* Serverworks CSB5 IDE does not fully support native mode
diff -ruN a/include/linux/pci_ids.h b/include/linux/pci_ids.h
--- a/include/linux/pci_ids.h 2009-07-27 18:54:41.000000000 +0800
+++ b/include/linux/pci_ids.h 2009-07-27 18:55:17.000000000 +0800
@@ -376,6 +376,9 @@
#define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c
#define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390
#define PCI_DEVICE_ID_ATI_IXP700_IDE 0x439c
+/* AMD SB Chipset */
+#define PCI_DEVICE_ID_AMD_SB900_IDE 0x780c
+#define PCI_DEVICE_ID_AMD_SB900_SATA_IDE 0x7800
#define PCI_VENDOR_ID_VLSI 0x1004
#define PCI_DEVICE_ID_VLSI_82C592 0x0005
next reply other threads:[~2009-07-29 3:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-29 3:34 Shane Huang [this message]
2009-07-29 4:02 ` [PATCH] Add AMD SB900 SATA/IDE controller device IDs Tejun Heo
-- strict thread matches above, loose matches on Subject: below --
2009-07-28 6:29 Shane Huang
2009-07-28 7:52 ` Tejun Heo
2009-07-29 0:56 ` Jeff Garzik
2009-07-29 2:32 ` Huang, Shane
2009-07-29 2:42 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1248838489.3470.7.camel@zm-desktop \
--to=shane.huang@amd.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).