From: Alex Vandiver <alex@chmrr.net>
To: Tejun Heo <tj@kernel.org>
Cc: linux-ide <linux-ide@vger.kernel.org>
Subject: Re: Intermittent SATA failures ("link offline, clearing class 1 to NONE")
Date: Tue, 01 Dec 2009 02:37:33 -0500 [thread overview]
Message-ID: <1259652273-sup-686@utwig> (raw)
In-Reply-To: <4B14B207.9010208@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 984 bytes --]
At Tue Dec 01 01:04:55 -0500 2009, Tejun Heo wrote:
> On 11/13/2009 04:43 AM, Alex Vandiver wrote:
> > ata2.00 is always the port which is reset. The only other person to
> > see that error seems to have been Tim Blechmann, in
> > <4AC9C373.80603@klingt.org>, which had similar symtoms. lspci -v for
> > this machine's IDE controllers is:
>
> Can you please attach full dmesg output after such event?
My original post included both 'goodboot' and 'badboot' files, which
were the dmesg output from a successful boot, and a failed boot with
the event -- is that not what you are looking for? Apologies if I'm
misunderstanding.
I tried 2.6.32-rc6 at the time as well -- it happened to have the
fault much more often, and showed that both ata2.00 and ata2.01 could
be affected. I've attached dmesg output from a successful boot, as
well as dmesg output from a boot which affected sdc, and a boot which
affected sdd.
- Alex
--
Networking -- only one letter away from not working
[-- Attachment #2: goodboot.2.6.32-rc6 --]
[-- Type: application/octet-stream, Size: 56354 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-rc6 (root@morelax) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #1 SMP Thu Nov 12 14:49:01 EST 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc6 root=/dev/mapper/raid-morelax ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] BIOS-e820: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FF00000000 write-back
[ 0.000000] 4 base 0200000000 mask FFE0000000 write-back
[ 0.000000] 5 base 0220000000 mask FFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf699 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable)
[ 0.000000] modified: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] modified: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] modified: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] modified: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf699000
[ 0.000000] 0000000000 - 00cf600000 page 2M
[ 0.000000] 00cf600000 - 00cf699000 page 4k
[ 0.000000] kernel direct mapping tables up to cf699000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000
[ 0.000000] RAMDISK: 3475e000 - 37fef211
[ 0.000000] ACPI: RSDP 00000000000f1450 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f1554 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000cf6c3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cf6af000 02FEE (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cf6c6000 00040
[ 0.000000] ACPI: APIC 00000000cf6c3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000cf6c35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000cf6c362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DMAR 00000000cf6c3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000cf6c38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000cf6c3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf6c3a3c 00176 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000cf6b2170 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000cf6b23e0 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000cf6b1ff0 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000cf6b2020 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 00000000cf6c3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000cf6c3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 00000000cf6c7000 02104 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 17 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 19 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 21 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 23 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 1 0-d0000000
[ 0.000000] SRAT: Node 0 PXM 1 100000000-230000000
[ 0.000000] NUMA: Using 32 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 000000000005bfff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a01f44] TEXT DATA BSS ==> [0001000000 - 0001a01f44]
[ 0.000000] #3 [003475e000 - 0037fef211] RAMDISK ==> [003475e000 - 0037fef211]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001a02000 - 0001a0232d] BRK ==> [0001a02000 - 0001a0232d]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x000cf699
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2094644
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3831 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 831185 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 32 CPUs, 24 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf699000 - 00000000cf6af000
[ 0.000000] PM: Registered nosave memory: 00000000cf6af000 - 00000000cf6ce000
[ 0.000000] PM: Registered nosave memory: 00000000cf6ce000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88002f800000 s91224 r8192 d23464 u131072
[ 0.000000] pcpu-alloc: s91224 r8192 d23464 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063176
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc6 root=/dev/mapper/raid-morelax ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8123516k/9175040k available (5353k kernel code, 796464k absent, 255060k reserved, 3066k data, 684k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1208
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2261.016 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.03 BogoMIPS (lpj=22610160)
[ 0.000023] Security Framework initialized
[ 0.000027] SELinux: Disabled at boot.
[ 0.000550] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002329] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003105] Mount-cache hash table entries: 256
[ 0.003215] Initializing cgroup subsys ns
[ 0.003217] Initializing cgroup subsys cpuacct
[ 0.003222] Initializing cgroup subsys memory
[ 0.003227] Initializing cgroup subsys freezer
[ 0.003228] Initializing cgroup subsys net_cls
[ 0.003243] CPU: Physical Processor ID: 1
[ 0.003244] CPU: Processor Core ID: 0
[ 0.003247] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003249] CPU: L2 cache: 256K
[ 0.003250] CPU: L3 cache: 8192K
[ 0.003253] CPU 0/0x10 -> Node 0
[ 0.003255] mce: CPU supports 9 MCE banks
[ 0.003264] CPU0: Thermal monitoring enabled (TM1)
[ 0.003267] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.003275] using mwait in idle threads.
[ 0.003276] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.003280] ... version: 3
[ 0.003281] ... bit width: 48
[ 0.003282] ... generic registers: 4
[ 0.003283] ... value mask: 0000ffffffffffff
[ 0.003285] ... max period: 000000007fffffff
[ 0.003286] ... fixed-purpose events: 3
[ 0.003287] ... event mask: 000000070000000f
[ 0.005203] ACPI: Core revision 20090903
[ 0.009112] Setting APIC routing to flat
[ 0.009554] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.109364] CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.228240] Booting processor 1 APIC 0x12 ip 0x6000
[ 0.238828] Initializing CPU#1
[ 0.387821] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609622)
[ 0.387828] CPU: Physical Processor ID: 1
[ 0.387829] CPU: Processor Core ID: 1
[ 0.387831] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.387833] CPU: L2 cache: 256K
[ 0.387833] CPU: L3 cache: 8192K
[ 0.387835] CPU 1/0x12 -> Node 0
[ 0.387846] CPU1: Thermal monitoring enabled (TM1)
[ 0.387849] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.387920] CPU1: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.387927] Skipping synchronization checks as TSC is reliable.
[ 0.387997] Booting processor 2 APIC 0x14 ip 0x6000
[ 0.398344] Initializing CPU#2
[ 0.547501] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609624)
[ 0.547507] CPU: Physical Processor ID: 1
[ 0.547508] CPU: Processor Core ID: 2
[ 0.547510] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.547512] CPU: L2 cache: 256K
[ 0.547513] CPU: L3 cache: 8192K
[ 0.547515] CPU 2/0x14 -> Node 0
[ 0.547525] CPU2: Thermal monitoring enabled (TM1)
[ 0.547528] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.547576] CPU2: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.547651] Booting processor 3 APIC 0x16 ip 0x6000
[ 0.557999] Initializing CPU#3
[ 0.707180] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609605)
[ 0.707187] CPU: Physical Processor ID: 1
[ 0.707188] CPU: Processor Core ID: 3
[ 0.707190] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.707191] CPU: L2 cache: 256K
[ 0.707192] CPU: L3 cache: 8192K
[ 0.707194] CPU 3/0x16 -> Node 0
[ 0.707204] CPU3: Thermal monitoring enabled (TM1)
[ 0.707207] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.707309] CPU3: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.707385] Booting processor 4 APIC 0x11 ip 0x6000
[ 0.717733] Initializing CPU#4
[ 0.866859] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609620)
[ 0.866867] CPU: Physical Processor ID: 1
[ 0.866868] CPU: Processor Core ID: 0
[ 0.866871] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.866873] CPU: L2 cache: 256K
[ 0.866874] CPU: L3 cache: 8192K
[ 0.866877] CPU 4/0x11 -> Node 0
[ 0.866888] CPU4: Thermal monitoring enabled (TM1)
[ 0.866891] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.866985] CPU4: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.867065] Booting processor 5 APIC 0x13 ip 0x6000
[ 0.877413] Initializing CPU#5
[ 1.026539] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609605)
[ 1.026545] CPU: Physical Processor ID: 1
[ 1.026546] CPU: Processor Core ID: 1
[ 1.026548] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.026550] CPU: L2 cache: 256K
[ 1.026551] CPU: L3 cache: 8192K
[ 1.026552] CPU 5/0x13 -> Node 0
[ 1.026563] CPU5: Thermal monitoring enabled (TM1)
[ 1.026565] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.026645] CPU5: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.026720] Booting processor 6 APIC 0x15 ip 0x6000
[ 1.037068] Initializing CPU#6
[ 1.186218] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609617)
[ 1.186224] CPU: Physical Processor ID: 1
[ 1.186225] CPU: Processor Core ID: 2
[ 1.186227] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.186229] CPU: L2 cache: 256K
[ 1.186230] CPU: L3 cache: 8192K
[ 1.186232] CPU 6/0x15 -> Node 0
[ 1.186242] CPU6: Thermal monitoring enabled (TM1)
[ 1.186244] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.186301] CPU6: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.186380] Booting processor 7 APIC 0x17 ip 0x6000
[ 1.196728] Initializing CPU#7
[ 1.345897] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609616)
[ 1.345904] CPU: Physical Processor ID: 1
[ 1.345905] CPU: Processor Core ID: 3
[ 1.345907] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.345908] CPU: L2 cache: 256K
[ 1.345909] CPU: L3 cache: 8192K
[ 1.345911] CPU 7/0x17 -> Node 0
[ 1.345921] CPU7: Thermal monitoring enabled (TM1)
[ 1.345923] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.345933] CPU7: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.345951] Brought up 8 CPUs
[ 1.345954] Total of 8 processors activated (36175.49 BogoMIPS).
[ 1.349649] CPU0 attaching sched-domain:
[ 1.349653] domain 0: span 0,4 level SIBLING
[ 1.349655] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 1.349659] domain 1: span 0-7 level MC
[ 1.349661] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.349669] CPU1 attaching sched-domain:
[ 1.349670] domain 0: span 1,5 level SIBLING
[ 1.349672] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 1.349676] domain 1: span 0-7 level MC
[ 1.349677] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.349684] CPU2 attaching sched-domain:
[ 1.349686] domain 0: span 2,6 level SIBLING
[ 1.349687] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 1.349691] domain 1: span 0-7 level MC
[ 1.349692] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.349699] CPU3 attaching sched-domain:
[ 1.349700] domain 0: span 3,7 level SIBLING
[ 1.349702] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 1.349706] domain 1: span 0-7 level MC
[ 1.349707] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.349714] CPU4 attaching sched-domain:
[ 1.349715] domain 0: span 0,4 level SIBLING
[ 1.349717] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 1.349721] domain 1: span 0-7 level MC
[ 1.349722] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.349729] CPU5 attaching sched-domain:
[ 1.349730] domain 0: span 1,5 level SIBLING
[ 1.349732] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 1.349735] domain 1: span 0-7 level MC
[ 1.349737] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.349743] CPU6 attaching sched-domain:
[ 1.349745] domain 0: span 2,6 level SIBLING
[ 1.349746] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 1.349750] domain 1: span 0-7 level MC
[ 1.349752] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.349758] CPU7 attaching sched-domain:
[ 1.349760] domain 0: span 3,7 level SIBLING
[ 1.349761] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 1.349765] domain 1: span 0-7 level MC
[ 1.349766] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.350329] regulator: core version 0.5
[ 1.350351] Time: 20:23:34 Date: 11/12/09
[ 1.350391] NET: Registered protocol family 16
[ 1.350477] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.350479] ACPI: bus type pci registered
[ 1.350539] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.350542] PCI: MCFG area at e0000000 reserved in E820
[ 1.356484] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.356485] PCI: Using configuration type 1 for base access
[ 1.357160] bio: create slab <bio-0> at 0
[ 1.357651] ACPI: EC: Look up EC in DSDT
[ 1.359430] ACPI: BIOS _OSI(Linux) query ignored
[ 1.359531] ACPI: Interpreter enabled
[ 1.359534] ACPI: (supports S0 S4 S5)
[ 1.359547] ACPI: Using IOAPIC for interrupt routing
[ 1.363057] ACPI: No dock devices found.
[ 1.363377] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.363448] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.363451] pci 0000:00:00.0: PME# disabled
[ 1.363510] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.363513] pci 0000:00:01.0: PME# disabled
[ 1.363572] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.363575] pci 0000:00:03.0: PME# disabled
[ 1.363635] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.363638] pci 0000:00:07.0: PME# disabled
[ 1.363826] pci 0000:00:1a.0: reg 20 io port: [0xfc40-0xfc5f]
[ 1.363890] pci 0000:00:1a.1: reg 20 io port: [0xfc60-0xfc7f]
[ 1.363958] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0ff800-0xdf0ffbff]
[ 1.364009] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.364013] pci 0000:00:1a.7: PME# disabled
[ 1.364061] pci 0000:00:1d.0: reg 20 io port: [0xfc80-0xfc9f]
[ 1.364125] pci 0000:00:1d.1: reg 20 io port: [0xfca0-0xfcbf]
[ 1.364188] pci 0000:00:1d.2: reg 20 io port: [0xfcc0-0xfcdf]
[ 1.364251] pci 0000:00:1d.3: reg 20 io port: [0xfce0-0xfcff]
[ 1.364318] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ffc00-0xdf0fffff]
[ 1.364368] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.364372] pci 0000:00:1d.7: PME# disabled
[ 1.364487] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 1.364490] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 1.364493] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 1.364496] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 1.364499] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 1.364548] pci 0000:00:1f.2: reg 10 io port: [0xf8e0-0xf8e7]
[ 1.364553] pci 0000:00:1f.2: reg 14 io port: [0xf8d0-0xf8d3]
[ 1.364558] pci 0000:00:1f.2: reg 18 io port: [0xf8e8-0xf8ef]
[ 1.364563] pci 0000:00:1f.2: reg 1c io port: [0xf8d4-0xf8d7]
[ 1.364568] pci 0000:00:1f.2: reg 20 io port: [0xfc00-0xfc0f]
[ 1.364573] pci 0000:00:1f.2: reg 24 io port: [0xfc10-0xfc1f]
[ 1.364626] pci 0000:00:1f.5: reg 10 io port: [0xf8f0-0xf8f7]
[ 1.364631] pci 0000:00:1f.5: reg 14 io port: [0xf8d8-0xf8db]
[ 1.364636] pci 0000:00:1f.5: reg 18 io port: [0xf8f8-0xf8ff]
[ 1.364641] pci 0000:00:1f.5: reg 1c io port: [0xf8dc-0xf8df]
[ 1.364646] pci 0000:00:1f.5: reg 20 io port: [0xfc20-0xfc2f]
[ 1.364651] pci 0000:00:1f.5: reg 24 io port: [0xfc30-0xfc3f]
[ 1.364721] pci 0000:01:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 1.364769] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.364772] pci 0000:01:00.0: PME# disabled
[ 1.364821] pci 0000:01:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 1.364869] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 1.364873] pci 0000:01:00.1: PME# disabled
[ 1.364907] pci 0000:00:01.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 1.364998] pci 0000:04:03.0: reg 10 32bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.365005] pci 0000:04:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
[ 1.365011] pci 0000:04:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
[ 1.365030] pci 0000:04:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 1.365086] pci 0000:00:1e.0: transparent bridge
[ 1.365091] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
[ 1.365097] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.365113] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.365493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 1.365569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 1.365643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 1.365724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 1.367860] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 1.367956] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.368050] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.368143] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.368236] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 1.368329] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 1.368422] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.368515] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.368598] vgaarb: device added: PCI:0000:04:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.368600] vgaarb: loaded
[ 1.368670] SCSI subsystem initialized
[ 1.368777] libata version 3.00 loaded.
[ 1.368828] usbcore: registered new interface driver usbfs
[ 1.368839] usbcore: registered new interface driver hub
[ 1.368860] usbcore: registered new device driver usb
[ 1.368947] ACPI: WMI: Mapper loaded
[ 1.368948] PCI: Using ACPI for IRQ routing
[ 1.369067] Bluetooth: Core ver 2.15
[ 1.369090] NET: Registered protocol family 31
[ 1.369092] Bluetooth: HCI device and connection manager initialized
[ 1.369093] Bluetooth: HCI socket layer initialized
[ 1.369095] NetLabel: Initializing
[ 1.369096] NetLabel: domain hash size = 128
[ 1.369097] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.369107] NetLabel: unlabeled traffic allowed by default
[ 1.369134] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.369138] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.435782] Switching to clocksource tsc
[ 1.437174] pnp: PnP ACPI init
[ 1.437183] ACPI: bus type pnp registered
[ 1.440019] pnp: PnP ACPI: found 13 devices
[ 1.440021] ACPI: ACPI bus type pnp unregistered
[ 1.440032] system 00:07: ioport range 0x800-0x87f has been reserved
[ 1.440034] system 00:07: ioport range 0x880-0x8ff could not be reserved
[ 1.440036] system 00:07: ioport range 0x900-0x91f has been reserved
[ 1.440038] system 00:07: ioport range 0x920-0x923 has been reserved
[ 1.440040] system 00:07: ioport range 0x924-0x924 has been reserved
[ 1.440042] system 00:07: ioport range 0xc00-0xc7f has been reserved
[ 1.440044] system 00:07: ioport range 0xca0-0xca7 has been reserved
[ 1.440046] system 00:07: ioport range 0xca9-0xcab has been reserved
[ 1.440048] system 00:07: ioport range 0xcad-0xcaf has been reserved
[ 1.440052] system 00:08: ioport range 0xca8-0xca8 has been reserved
[ 1.440054] system 00:08: ioport range 0xcac-0xcac has been reserved
[ 1.440062] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.440066] system 00:0c: iomem range 0xfed90000-0xfed91fff has been reserved
[ 1.444704] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.444706] pci 0000:00:01.0: IO window: disabled
[ 1.444709] pci 0000:00:01.0: MEM window: 0xda000000-0xddffffff
[ 1.444712] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.444715] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.444717] pci 0000:00:03.0: IO window: disabled
[ 1.444720] pci 0000:00:03.0: MEM window: disabled
[ 1.444723] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.444726] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 1.444727] pci 0000:00:07.0: IO window: disabled
[ 1.444730] pci 0000:00:07.0: MEM window: disabled
[ 1.444733] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.444738] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.444739] pci 0000:00:1e.0: IO window: disabled
[ 1.444743] pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
[ 1.444747] pci 0000:00:1e.0: PREFETCH window: 0x000000d9800000-0x000000d9ffffff
[ 1.444757] alloc irq_desc for 53 on node -1
[ 1.444759] alloc kstat_irqs on node -1
[ 1.444764] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.444767] pci 0000:00:01.0: setting latency timer to 64
[ 1.444773] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.444776] pci 0000:00:03.0: setting latency timer to 64
[ 1.444782] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.444785] pci 0000:00:07.0: setting latency timer to 64
[ 1.444790] pci 0000:00:1e.0: setting latency timer to 64
[ 1.444793] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.444795] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.444797] pci_bus 0000:01: resource 1 mem: [0xda000000-0xddffffff]
[ 1.444799] pci_bus 0000:04: resource 1 mem: [0xde000000-0xdeffffff]
[ 1.444801] pci_bus 0000:04: resource 2 pref mem [0xd9800000-0xd9ffffff]
[ 1.444803] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 1.444805] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.444830] NET: Registered protocol family 2
[ 1.445033] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.445921] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.447424] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.447633] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.447635] TCP reno registered
[ 1.447775] NET: Registered protocol family 1
[ 1.467020] pci 0000:04:03.0: Boot video device
[ 1.467057] Trying to unpack rootfs image as initramfs...
[ 2.593954] Freeing initrd memory: 57924k freed
[ 2.602948] Scanning for low memory corruption every 60 seconds
[ 2.603049] audit: initializing netlink socket (disabled)
[ 2.603059] type=2000 audit(1258057415.490:1): initialized
[ 2.612274] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.613426] VFS: Disk quotas dquot_6.5.2
[ 2.613470] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.613953] fuse init (API version 7.13)
[ 2.614019] msgmni has been set to 15979
[ 2.614241] alg: No test for stdrng (krng)
[ 2.614249] io scheduler noop registered
[ 2.614250] io scheduler anticipatory registered
[ 2.614252] io scheduler deadline registered (default)
[ 2.614286] io scheduler cfq registered
[ 2.614378] alloc irq_desc for 56 on node -1
[ 2.614379] alloc kstat_irqs on node -1
[ 2.614387] pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
[ 2.614393] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.614483] alloc irq_desc for 57 on node -1
[ 2.614485] alloc kstat_irqs on node -1
[ 2.614490] pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
[ 2.614496] pcieport 0000:00:03.0: setting latency timer to 64
[ 2.614585] alloc irq_desc for 58 on node -1
[ 2.614586] alloc kstat_irqs on node -1
[ 2.614591] pcieport 0000:00:07.0: irq 58 for MSI/MSI-X
[ 2.614597] pcieport 0000:00:07.0: setting latency timer to 64
[ 2.614882] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 2.614912] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 2.614944] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 2.614952] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.614969] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.615054] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.615057] ACPI: Power Button [PWRF]
[ 2.615484] Monitor-Mwait will be used to enter C-1 state
[ 2.615503] Monitor-Mwait will be used to enter C-3 state
[ 2.615534] processor LNXCPU:00: registered as cooling_device0
[ 2.615884] processor LNXCPU:01: registered as cooling_device1
[ 2.616231] processor LNXCPU:02: registered as cooling_device2
[ 2.616585] processor LNXCPU:03: registered as cooling_device3
[ 2.616942] processor LNXCPU:04: registered as cooling_device4
[ 2.617289] processor LNXCPU:05: registered as cooling_device5
[ 2.617639] processor LNXCPU:06: registered as cooling_device6
[ 2.617994] processor LNXCPU:07: registered as cooling_device7
[ 2.620621] Linux agpgart interface v0.103
[ 2.620624] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.620716] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.620805] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.621004] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.621117] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.621936] brd: module loaded
[ 2.622287] loop: module loaded
[ 2.622334] input: Macintosh mouse button emulation as /devices/virtual/input/input1
[ 2.622415] ata_piix 0000:00:1f.2: version 2.13
[ 2.622425] alloc irq_desc for 23 on node -1
[ 2.622426] alloc kstat_irqs on node -1
[ 2.622431] ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 2.622435] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.622464] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.622502] scsi0 : ata_piix
[ 2.622554] scsi1 : ata_piix
[ 2.622578] ata1: SATA max UDMA/133 cmd 0xf8e0 ctl 0xf8d0 bmdma 0xfc00 irq 23
[ 2.622583] ata2: SATA max UDMA/133 cmd 0xf8e8 ctl 0xf8d4 bmdma 0xfc08 irq 23
[ 2.622596] alloc irq_desc for 22 on node -1
[ 2.622597] alloc kstat_irqs on node -1
[ 2.622601] ata_piix 0000:00:1f.5: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 2.622605] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.773264] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.773307] scsi2 : ata_piix
[ 2.773350] scsi3 : ata_piix
[ 2.773372] ata3: SATA max UDMA/133 cmd 0xf8f0 ctl 0xf8d8 bmdma 0xfc20 irq 22
[ 2.773375] ata4: SATA max UDMA/133 cmd 0xf8f8 ctl 0xf8dc bmdma 0xfc28 irq 22
[ 2.773912] Fixed MDIO Bus: probed
[ 2.773936] PPP generic driver version 2.4.2
[ 2.773991] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.774005] alloc irq_desc for 19 on node -1
[ 2.774006] alloc kstat_irqs on node -1
[ 2.774011] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.774025] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.774028] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.774061] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.774081] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.777961] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.777971] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0ff800
[ 2.794304] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.794379] usb usb1: configuration #1 chosen from 1 choice
[ 2.794400] hub 1-0:1.0: USB hub found
[ 2.794405] hub 1-0:1.0: 4 ports detected
[ 2.794444] alloc irq_desc for 21 on node -1
[ 2.794445] alloc kstat_irqs on node -1
[ 2.794449] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.794459] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.794461] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.794484] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.794502] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.798367] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.798376] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
[ 2.814266] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.814325] usb usb2: configuration #1 chosen from 1 choice
[ 2.814347] hub 2-0:1.0: USB hub found
[ 2.814351] hub 2-0:1.0: 4 ports detected
[ 2.814388] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.814398] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.814436] alloc irq_desc for 17 on node -1
[ 2.814438] alloc kstat_irqs on node -1
[ 2.814442] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.814446] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.814449] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.814472] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.814499] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000fc40
[ 2.814553] usb usb3: configuration #1 chosen from 1 choice
[ 2.814571] hub 3-0:1.0: USB hub found
[ 2.814575] hub 3-0:1.0: 2 ports detected
[ 2.814608] alloc irq_desc for 18 on node -1
[ 2.814610] alloc kstat_irqs on node -1
[ 2.814613] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.814618] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.814620] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.814641] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.814670] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000fc60
[ 2.814722] usb usb4: configuration #1 chosen from 1 choice
[ 2.814740] hub 4-0:1.0: USB hub found
[ 2.814744] hub 4-0:1.0: 2 ports detected
[ 2.814776] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.814781] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.814783] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.814802] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.814823] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000fc80
[ 2.814876] usb usb5: configuration #1 chosen from 1 choice
[ 2.814893] hub 5-0:1.0: USB hub found
[ 2.814897] hub 5-0:1.0: 2 ports detected
[ 2.814928] alloc irq_desc for 20 on node -1
[ 2.814930] alloc kstat_irqs on node -1
[ 2.814934] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.814938] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.814941] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.814960] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.814988] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000fca0
[ 2.815040] usb usb6: configuration #1 chosen from 1 choice
[ 2.815058] hub 6-0:1.0: USB hub found
[ 2.815061] hub 6-0:1.0: 2 ports detected
[ 2.815092] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.815097] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.815099] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.815127] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.815147] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000fcc0
[ 2.815198] usb usb7: configuration #1 chosen from 1 choice
[ 2.815217] hub 7-0:1.0: USB hub found
[ 2.815222] hub 7-0:1.0: 2 ports detected
[ 2.815254] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 2.815259] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.815262] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.815285] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 2.815305] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000fce0
[ 2.815359] usb usb8: configuration #1 chosen from 1 choice
[ 2.815378] hub 8-0:1.0: USB hub found
[ 2.815382] hub 8-0:1.0: 2 ports detected
[ 2.815449] PNP: No PS/2 controller found. Probing ports directly.
[ 2.818182] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.818192] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.818248] mice: PS/2 mouse device common for all mice
[ 2.818280] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 2.818299] rtc_cmos 00:04: RTC can wake from S4
[ 2.818319] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.818342] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 2.818437] device-mapper: uevent: version 1.0.3
[ 2.818492] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.818604] device-mapper: multipath: version 1.1.0 loaded
[ 2.818606] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.818968] cpuidle: using governor ladder
[ 2.819176] cpuidle: using governor menu
[ 2.819527] TCP cubic registered
[ 2.819626] NET: Registered protocol family 10
[ 2.820099] lo: Disabled Privacy Extensions
[ 2.820340] NET: Registered protocol family 17
[ 2.820352] Bluetooth: L2CAP ver 2.14
[ 2.820353] Bluetooth: L2CAP socket layer initialized
[ 2.820355] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.820356] Bluetooth: SCO socket layer initialized
[ 2.820372] Bluetooth: RFCOMM TTY layer initialized
[ 2.820374] Bluetooth: RFCOMM socket layer initialized
[ 2.820376] Bluetooth: RFCOMM ver 1.11
[ 2.821807] PM: Resume from disk failed.
[ 2.821814] registered taskstats version 1
[ 2.822219] Magic number: 1:876:396
[ 2.822327] rtc_cmos 00:04: setting system clock to 2009-11-12 20:23:36 UTC (1258057416)
[ 2.822329] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.822331] EDD information not available.
[ 3.113460] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 3.134445] ata4: SATA link down (SStatus 4 SControl 0)
[ 3.262798] usb 1-3: configuration #1 chosen from 1 choice
[ 3.263048] hub 1-3:1.0: USB hub found
[ 3.263285] hub 1-3:1.0: 4 ports detected
[ 3.292313] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.312469] ata3.00: ATAPI: TEAC DVD-ROM DV28SV, D.0L, max UDMA/100
[ 3.352405] ata3.00: configured for UDMA/100
[ 3.472041] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.472058] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.472229] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.472241] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.512698] ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.512702] ata2.00: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.512995] ata2.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.512998] ata2.01: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.513004] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.513009] ata1.00: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.513323] ata1.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.513326] ata1.01: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.532713] ata2.00: configured for UDMA/133
[ 3.533007] ata1.00: configured for UDMA/133
[ 3.552222] ata1.01: configured for UDMA/133
[ 3.552346] scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.552424] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.552509] scsi 0:0:1:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.552548] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.552585] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 3.552595] ata2.01: configured for UDMA/133
[ 3.552605] sd 0:0:0:0: [sda] Write Protect is off
[ 3.552608] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.552618] sd 0:0:1:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.552630] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.552651] sd 0:0:1:0: [sdb] Write Protect is off
[ 3.552653] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.552668] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.552672] scsi 1:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.552731] sda:
[ 3.552753] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 3.552828] sd 1:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.552832] scsi 1:0:1:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.552855] sd 1:0:0:0: [sdc] Write Protect is off
[ 3.552857] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.552871] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.552904] sd 1:0:1:0: Attached scsi generic sg3 type 0
[ 3.552916] sd 1:0:1:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.552964] sd 1:0:1:0: [sdd] Write Protect is off
[ 3.552966] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.552979] sdc:
[ 3.552981] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.561419] sdc1
[ 3.561499] sdd:
[ 3.562275] usb 2-3: new high speed USB device using ehci_hcd and address 4
[ 3.562653] sda1
[ 3.562710] sdb:
[ 3.568499] scsi 2:0:0:0: CD-ROM TEAC DVD-ROM DV28SV D.0L PQ: 0 ANSI: 5
[ 3.572822] sdb1
[ 3.572924] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.572972] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 3.581329] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 3.581333] Uniform CD-ROM driver Revision: 3.20
[ 3.581398] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.581424] sr 2:0:0:0: Attached scsi generic sg4 type 5
[ 3.722276] usb 2-3: configuration #1 chosen from 1 choice
[ 4.020785] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 4.038568] sdd1
[ 4.038704] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 4.038750] sd 1:0:1:0: [sdd] Attached SCSI disk
[ 4.038765] Freeing unused kernel memory: 684k freed
[ 4.038860] Write protecting the kernel read-only data: 7656k
[ 4.168057] Initializing USB Mass Storage driver...
[ 4.168188] scsi4 : SCSI emulation for USB Mass Storage devices
[ 4.168271] usbcore: registered new interface driver usb-storage
[ 4.168274] USB Mass Storage support registered.
[ 4.169050] md: linear personality registered for level -1
[ 4.169299] usb-storage: device found at 4
[ 4.169302] usb-storage: waiting for device to settle before scanning
[ 4.172049] md: multipath personality registered for level -4
[ 4.173563] md: raid0 personality registered for level 0
[ 4.175943] md: raid1 personality registered for level 1
[ 4.177288] async_tx: api initialized (async)
[ 4.177898] xor: automatically using best checksumming function: generic_sse
[ 4.209154] usb 5-1: configuration #1 chosen from 1 choice
[ 4.216011] usbcore: registered new interface driver hiddev
[ 4.221322] generic_sse: 8935.600 MB/sec
[ 4.221324] xor: using function: generic_sse (8935.600 MB/sec)
[ 4.230683] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input2
[ 4.230730] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 4.230747] usbcore: registered new interface driver usbhid
[ 4.230750] usbhid: v2.6:USB HID core driver
[ 4.249421] md: bind<sda1>
[ 4.250843] md: bind<sdb1>
[ 4.258799] md: bind<sdc1>
[ 4.391043] raid6: int64x1 2286 MB/s
[ 4.490999] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 4.560673] raid6: int64x2 2978 MB/s
[ 4.662279] usb 5-2: configuration #1 chosen from 1 choice
[ 4.672322] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input3
[ 4.672360] generic-usb 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 4.678299] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input4
[ 4.678340] generic-usb 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 4.730342] raid6: int64x4 1985 MB/s
[ 4.900025] raid6: int64x8 2085 MB/s
[ 5.069712] raid6: sse2x1 6232 MB/s
[ 5.239375] raid6: sse2x2 7303 MB/s
[ 5.409041] raid6: sse2x4 8283 MB/s
[ 5.409043] raid6: using algorithm sse2x4 (8283 MB/s)
[ 5.413677] md: raid6 personality registered for level 6
[ 5.413679] md: raid5 personality registered for level 5
[ 5.413681] md: raid4 personality registered for level 4
[ 5.418270] md: raid10 personality registered for level 10
[ 5.459777] raid5: md0 is not clean -- starting background reconstruction
[ 5.459786] raid5: device sdc1 operational as raid disk 2
[ 5.459788] raid5: device sdb1 operational as raid disk 1
[ 5.459789] raid5: device sda1 operational as raid disk 0
[ 5.460014] raid5: allocated 3230kB for md0
[ 5.460165] raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
[ 5.460168] RAID5 conf printout:
[ 5.460169] --- rd:3 wd:3
[ 5.460174] disk 0, o:1, dev:sda1
[ 5.460175] disk 1, o:1, dev:sdb1
[ 5.460176] disk 2, o:1, dev:sdc1
[ 5.460196] md0: detected capacity change from 0 to 3000598396928
[ 5.460274] md: resync of RAID array md0
[ 5.460276] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 5.460278] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 5.460287] md: using 128k window, over a total of 1465135936 blocks.
[ 5.460288] md: resuming resync of md0 from checkpoint.
[ 5.460907] md0: unknown partition table
[ 5.669937] md: bind<sdd1>
[ 5.976976] PM: Starting manual resume from disk
[ 5.976979] PM: Resume from partition 252:1
[ 5.976980] PM: Checking hibernation image.
[ 5.977122] PM: Error -22 checking image file
[ 5.977125] PM: Resume from disk failed.
[ 6.013219] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 6.934686] Adding 974840k swap on /dev/mapper/raid-morelax_swap. Priority:-1 extents:1 across:974840k
[ 7.179783] udev: starting version 147
[ 8.270284] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 8.718453] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
[ 8.718468] alloc irq_desc for 36 on node -1
[ 8.718470] alloc kstat_irqs on node -1
[ 8.718476] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 8.718482] bnx2 0000:01:00.0: setting latency timer to 64
[ 8.718656] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 8.855144] lp: driver loaded but no devices found
[ 8.966445] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 8.970008] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.053257] eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 36, node addr 00:26:b9:3c:e0:bc
[ 9.053277] alloc irq_desc for 48 on node -1
[ 9.053279] alloc kstat_irqs on node -1
[ 9.053286] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
[ 9.053291] bnx2 0000:01:00.1: setting latency timer to 64
[ 9.053420] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 9.055510] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 9.058042] eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 48, node addr 00:26:b9:3c:e0:bd
[ 9.151979] usb-storage: device scan complete
[ 9.156712] scsi 4:0:0:0: CD-ROM iDRAC Virtual CD 0323 PQ: 0 ANSI: 0
[ 9.158576] scsi 4:0:0:1: Direct-Access iDRAC Virtual Floppy 0323 PQ: 0 ANSI: 0 CCS
[ 9.263614] sr1: scsi3-mmc drive: 0x/0x cd/rw caddy
[ 9.263707] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 9.263752] sr 4:0:0:0: Attached scsi generic sg5 type 5
[ 9.263825] sd 4:0:0:1: Attached scsi generic sg6 type 0
[ 9.266601] sd 4:0:0:1: [sde] Attached SCSI removable disk
[ 9.443806] alloc irq_desc for 59 on node -1
[ 9.443809] alloc kstat_irqs on node -1
[ 9.443814] bnx2 0000:01:00.0: irq 59 for MSI/MSI-X
[ 9.443816] alloc irq_desc for 60 on node -1
[ 9.443817] alloc kstat_irqs on node -1
[ 9.443820] bnx2 0000:01:00.0: irq 60 for MSI/MSI-X
[ 9.443821] alloc irq_desc for 61 on node -1
[ 9.443822] alloc kstat_irqs on node -1
[ 9.443825] bnx2 0000:01:00.0: irq 61 for MSI/MSI-X
[ 9.443826] alloc irq_desc for 62 on node -1
[ 9.443828] alloc kstat_irqs on node -1
[ 9.443830] bnx2 0000:01:00.0: irq 62 for MSI/MSI-X
[ 9.443832] alloc irq_desc for 63 on node -1
[ 9.443833] alloc kstat_irqs on node -1
[ 9.443835] bnx2 0000:01:00.0: irq 63 for MSI/MSI-X
[ 9.443836] alloc irq_desc for 64 on node -1
[ 9.443838] alloc kstat_irqs on node -1
[ 9.443840] bnx2 0000:01:00.0: irq 64 for MSI/MSI-X
[ 9.443841] alloc irq_desc for 65 on node -1
[ 9.443843] alloc kstat_irqs on node -1
[ 9.443845] bnx2 0000:01:00.0: irq 65 for MSI/MSI-X
[ 9.443846] alloc irq_desc for 66 on node -1
[ 9.443848] alloc kstat_irqs on node -1
[ 9.443850] bnx2 0000:01:00.0: irq 66 for MSI/MSI-X
[ 9.443851] alloc irq_desc for 67 on node -1
[ 9.443853] alloc kstat_irqs on node -1
[ 9.443855] bnx2 0000:01:00.0: irq 67 for MSI/MSI-X
[ 9.502453] bnx2: eth0: using MSIX
[ 9.503149] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.177921] bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex
[ 11.178739] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.304885] eth0: no IPv6 routers present
[-- Attachment #3: sdc-badboot.2.6.32-rc6 --]
[-- Type: application/octet-stream, Size: 52231 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-rc6 (root@morelax) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #1 SMP Thu Nov 12 14:49:01 EST 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc6 root=/dev/mapper/raid-morelax ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] BIOS-e820: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FF00000000 write-back
[ 0.000000] 4 base 0200000000 mask FFE0000000 write-back
[ 0.000000] 5 base 0220000000 mask FFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf699 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable)
[ 0.000000] modified: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] modified: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] modified: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] modified: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf699000
[ 0.000000] 0000000000 - 00cf600000 page 2M
[ 0.000000] 00cf600000 - 00cf699000 page 4k
[ 0.000000] kernel direct mapping tables up to cf699000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000
[ 0.000000] RAMDISK: 3475e000 - 37fef211
[ 0.000000] ACPI: RSDP 00000000000f1450 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f1554 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000cf6c3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cf6af000 02FEE (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cf6c6000 00040
[ 0.000000] ACPI: APIC 00000000cf6c3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000cf6c35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000cf6c362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DMAR 00000000cf6c3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000cf6c38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000cf6c3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf6c3a3c 00176 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000cf6b2170 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000cf6b23e0 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000cf6b1ff0 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000cf6b2020 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 00000000cf6c3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000cf6c3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 00000000cf6c7000 02104 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 17 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 19 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 21 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 23 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 1 0-d0000000
[ 0.000000] SRAT: Node 0 PXM 1 100000000-230000000
[ 0.000000] NUMA: Using 32 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 000000000005bfff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a01f44] TEXT DATA BSS ==> [0001000000 - 0001a01f44]
[ 0.000000] #3 [003475e000 - 0037fef211] RAMDISK ==> [003475e000 - 0037fef211]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001a02000 - 0001a0232d] BRK ==> [0001a02000 - 0001a0232d]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x000cf699
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2094644
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3831 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 831185 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 32 CPUs, 24 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf699000 - 00000000cf6af000
[ 0.000000] PM: Registered nosave memory: 00000000cf6af000 - 00000000cf6ce000
[ 0.000000] PM: Registered nosave memory: 00000000cf6ce000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88002f800000 s91224 r8192 d23464 u131072
[ 0.000000] pcpu-alloc: s91224 r8192 d23464 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063176
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc6 root=/dev/mapper/raid-morelax ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8123516k/9175040k available (5353k kernel code, 796464k absent, 255060k reserved, 3066k data, 684k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1208
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2261.053 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.10 BogoMIPS (lpj=22610530)
[ 0.000024] Security Framework initialized
[ 0.000028] SELinux: Disabled at boot.
[ 0.000554] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002333] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003110] Mount-cache hash table entries: 256
[ 0.003218] Initializing cgroup subsys ns
[ 0.003221] Initializing cgroup subsys cpuacct
[ 0.003226] Initializing cgroup subsys memory
[ 0.003231] Initializing cgroup subsys freezer
[ 0.003232] Initializing cgroup subsys net_cls
[ 0.003247] CPU: Physical Processor ID: 1
[ 0.003248] CPU: Processor Core ID: 0
[ 0.003251] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003253] CPU: L2 cache: 256K
[ 0.003254] CPU: L3 cache: 8192K
[ 0.003257] CPU 0/0x10 -> Node 0
[ 0.003259] mce: CPU supports 9 MCE banks
[ 0.003268] CPU0: Thermal monitoring enabled (TM1)
[ 0.003271] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[ 0.003279] using mwait in idle threads.
[ 0.003280] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.003284] ... version: 3
[ 0.003285] ... bit width: 48
[ 0.003286] ... generic registers: 4
[ 0.003288] ... value mask: 0000ffffffffffff
[ 0.003289] ... max period: 000000007fffffff
[ 0.003290] ... fixed-purpose events: 3
[ 0.003291] ... event mask: 000000070000000f
[ 0.005209] ACPI: Core revision 20090903
[ 0.009121] Setting APIC routing to flat
[ 0.009563] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.109376] CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.228453] Booting processor 1 APIC 0x12 ip 0x6000
[ 0.239047] Initializing CPU#1
[ 0.388036] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609640)
[ 0.388042] CPU: Physical Processor ID: 1
[ 0.388043] CPU: Processor Core ID: 1
[ 0.388045] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.388047] CPU: L2 cache: 256K
[ 0.388048] CPU: L3 cache: 8192K
[ 0.388050] CPU 1/0x12 -> Node 0
[ 0.388060] CPU1: Thermal monitoring enabled (TM1)
[ 0.388063] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.388135] CPU1: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.388141] Skipping synchronization checks as TSC is reliable.
[ 0.388211] Booting processor 2 APIC 0x14 ip 0x6000
[ 0.398559] Initializing CPU#2
[ 0.547715] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609630)
[ 0.547722] CPU: Physical Processor ID: 1
[ 0.547723] CPU: Processor Core ID: 2
[ 0.547725] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.547726] CPU: L2 cache: 256K
[ 0.547727] CPU: L3 cache: 8192K
[ 0.547729] CPU 2/0x14 -> Node 0
[ 0.547739] CPU2: Thermal monitoring enabled (TM1)
[ 0.547742] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.547790] CPU2: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.547866] Booting processor 3 APIC 0x16 ip 0x6000
[ 0.558214] Initializing CPU#3
[ 0.707394] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609632)
[ 0.707401] CPU: Physical Processor ID: 1
[ 0.707402] CPU: Processor Core ID: 3
[ 0.707404] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.707406] CPU: L2 cache: 256K
[ 0.707406] CPU: L3 cache: 8192K
[ 0.707408] CPU 3/0x16 -> Node 0
[ 0.707419] CPU3: Thermal monitoring enabled (TM1)
[ 0.707421] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.707446] CPU3: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.707520] Booting processor 4 APIC 0x11 ip 0x6000
[ 0.717869] Initializing CPU#4
[ 0.867074] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609600)
[ 0.867082] CPU: Physical Processor ID: 1
[ 0.867083] CPU: Processor Core ID: 0
[ 0.867086] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.867088] CPU: L2 cache: 256K
[ 0.867089] CPU: L3 cache: 8192K
[ 0.867091] CPU 4/0x11 -> Node 0
[ 0.867103] CPU4: Thermal monitoring enabled (TM1)
[ 0.867106] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.867192] CPU4: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.867273] Booting processor 5 APIC 0x13 ip 0x6000
[ 0.877622] Initializing CPU#5
[ 1.026753] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609613)
[ 1.026760] CPU: Physical Processor ID: 1
[ 1.026761] CPU: Processor Core ID: 1
[ 1.026763] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.026764] CPU: L2 cache: 256K
[ 1.026765] CPU: L3 cache: 8192K
[ 1.026767] CPU 5/0x13 -> Node 0
[ 1.026777] CPU5: Thermal monitoring enabled (TM1)
[ 1.026779] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.026855] CPU5: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.026930] Booting processor 6 APIC 0x15 ip 0x6000
[ 1.037278] Initializing CPU#6
[ 1.186432] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609629)
[ 1.186439] CPU: Physical Processor ID: 1
[ 1.186440] CPU: Processor Core ID: 2
[ 1.186442] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.186443] CPU: L2 cache: 256K
[ 1.186444] CPU: L3 cache: 8192K
[ 1.186446] CPU 6/0x15 -> Node 0
[ 1.186456] CPU6: Thermal monitoring enabled (TM1)
[ 1.186458] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.186511] CPU6: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.186590] Booting processor 7 APIC 0x17 ip 0x6000
[ 1.196938] Initializing CPU#7
[ 1.346112] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609628)
[ 1.346118] CPU: Physical Processor ID: 1
[ 1.346119] CPU: Processor Core ID: 3
[ 1.346121] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.346123] CPU: L2 cache: 256K
[ 1.346123] CPU: L3 cache: 8192K
[ 1.346125] CPU 7/0x17 -> Node 0
[ 1.346135] CPU7: Thermal monitoring enabled (TM1)
[ 1.346138] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.346170] CPU7: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.346189] Brought up 8 CPUs
[ 1.346192] Total of 8 processors activated (36175.58 BogoMIPS).
[ 1.349877] CPU0 attaching sched-domain:
[ 1.349880] domain 0: span 0,4 level SIBLING
[ 1.349882] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 1.349886] domain 1: span 0-7 level MC
[ 1.349888] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.349896] CPU1 attaching sched-domain:
[ 1.349898] domain 0: span 1,5 level SIBLING
[ 1.349899] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 1.349903] domain 1: span 0-7 level MC
[ 1.349904] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.349911] CPU2 attaching sched-domain:
[ 1.349913] domain 0: span 2,6 level SIBLING
[ 1.349914] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 1.349918] domain 1: span 0-7 level MC
[ 1.349920] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.349926] CPU3 attaching sched-domain:
[ 1.349928] domain 0: span 3,7 level SIBLING
[ 1.349929] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 1.349933] domain 1: span 0-7 level MC
[ 1.349934] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.349941] CPU4 attaching sched-domain:
[ 1.349942] domain 0: span 0,4 level SIBLING
[ 1.349944] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 1.349948] domain 1: span 0-7 level MC
[ 1.349949] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.349956] CPU5 attaching sched-domain:
[ 1.349957] domain 0: span 1,5 level SIBLING
[ 1.349959] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 1.349962] domain 1: span 0-7 level MC
[ 1.349964] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.349971] CPU6 attaching sched-domain:
[ 1.349972] domain 0: span 2,6 level SIBLING
[ 1.349974] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 1.349977] domain 1: span 0-7 level MC
[ 1.349979] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.349985] CPU7 attaching sched-domain:
[ 1.349987] domain 0: span 3,7 level SIBLING
[ 1.349988] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 1.349992] domain 1: span 0-7 level MC
[ 1.349993] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.350558] regulator: core version 0.5
[ 1.350581] Time: 19:56:17 Date: 11/12/09
[ 1.350620] NET: Registered protocol family 16
[ 1.350706] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.350708] ACPI: bus type pci registered
[ 1.350768] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.350770] PCI: MCFG area at e0000000 reserved in E820
[ 1.356712] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.356713] PCI: Using configuration type 1 for base access
[ 1.357391] bio: create slab <bio-0> at 0
[ 1.357881] ACPI: EC: Look up EC in DSDT
[ 1.359656] ACPI: BIOS _OSI(Linux) query ignored
[ 1.359757] ACPI: Interpreter enabled
[ 1.359760] ACPI: (supports S0 S4 S5)
[ 1.359773] ACPI: Using IOAPIC for interrupt routing
[ 1.363280] ACPI: No dock devices found.
[ 1.363601] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.363672] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.363675] pci 0000:00:00.0: PME# disabled
[ 1.363735] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.363738] pci 0000:00:01.0: PME# disabled
[ 1.363797] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.363800] pci 0000:00:03.0: PME# disabled
[ 1.363860] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.363863] pci 0000:00:07.0: PME# disabled
[ 1.364051] pci 0000:00:1a.0: reg 20 io port: [0xfc40-0xfc5f]
[ 1.364115] pci 0000:00:1a.1: reg 20 io port: [0xfc60-0xfc7f]
[ 1.364183] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0ff800-0xdf0ffbff]
[ 1.364234] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.364237] pci 0000:00:1a.7: PME# disabled
[ 1.364286] pci 0000:00:1d.0: reg 20 io port: [0xfc80-0xfc9f]
[ 1.364350] pci 0000:00:1d.1: reg 20 io port: [0xfca0-0xfcbf]
[ 1.364413] pci 0000:00:1d.2: reg 20 io port: [0xfcc0-0xfcdf]
[ 1.364476] pci 0000:00:1d.3: reg 20 io port: [0xfce0-0xfcff]
[ 1.364543] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ffc00-0xdf0fffff]
[ 1.364593] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.364597] pci 0000:00:1d.7: PME# disabled
[ 1.364711] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 1.364715] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 1.364718] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 1.364721] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 1.364724] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 1.364772] pci 0000:00:1f.2: reg 10 io port: [0xf8e0-0xf8e7]
[ 1.364777] pci 0000:00:1f.2: reg 14 io port: [0xf8d0-0xf8d3]
[ 1.364782] pci 0000:00:1f.2: reg 18 io port: [0xf8e8-0xf8ef]
[ 1.364787] pci 0000:00:1f.2: reg 1c io port: [0xf8d4-0xf8d7]
[ 1.364793] pci 0000:00:1f.2: reg 20 io port: [0xfc00-0xfc0f]
[ 1.364797] pci 0000:00:1f.2: reg 24 io port: [0xfc10-0xfc1f]
[ 1.364850] pci 0000:00:1f.5: reg 10 io port: [0xf8f0-0xf8f7]
[ 1.364855] pci 0000:00:1f.5: reg 14 io port: [0xf8d8-0xf8db]
[ 1.364860] pci 0000:00:1f.5: reg 18 io port: [0xf8f8-0xf8ff]
[ 1.364865] pci 0000:00:1f.5: reg 1c io port: [0xf8dc-0xf8df]
[ 1.364870] pci 0000:00:1f.5: reg 20 io port: [0xfc20-0xfc2f]
[ 1.364875] pci 0000:00:1f.5: reg 24 io port: [0xfc30-0xfc3f]
[ 1.364945] pci 0000:01:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 1.364993] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.364996] pci 0000:01:00.0: PME# disabled
[ 1.365045] pci 0000:01:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 1.365093] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 1.365096] pci 0000:01:00.1: PME# disabled
[ 1.365131] pci 0000:00:01.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 1.365222] pci 0000:04:03.0: reg 10 32bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.365228] pci 0000:04:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
[ 1.365234] pci 0000:04:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
[ 1.365253] pci 0000:04:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 1.365309] pci 0000:00:1e.0: transparent bridge
[ 1.365314] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
[ 1.365320] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.365336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.365718] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 1.365794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 1.365869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 1.365949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 1.368082] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 1.368179] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.368273] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.368366] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.368459] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 1.368553] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 1.368646] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.368739] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.368822] vgaarb: device added: PCI:0000:04:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.368824] vgaarb: loaded
[ 1.368895] SCSI subsystem initialized
[ 1.369001] libata version 3.00 loaded.
[ 1.369052] usbcore: registered new interface driver usbfs
[ 1.369063] usbcore: registered new interface driver hub
[ 1.369084] usbcore: registered new device driver usb
[ 1.369171] ACPI: WMI: Mapper loaded
[ 1.369172] PCI: Using ACPI for IRQ routing
[ 1.369291] Bluetooth: Core ver 2.15
[ 1.369314] NET: Registered protocol family 31
[ 1.369315] Bluetooth: HCI device and connection manager initialized
[ 1.369317] Bluetooth: HCI socket layer initialized
[ 1.369318] NetLabel: Initializing
[ 1.369320] NetLabel: domain hash size = 128
[ 1.369321] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.369330] NetLabel: unlabeled traffic allowed by default
[ 1.369357] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.369362] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.436005] Switching to clocksource tsc
[ 1.437412] pnp: PnP ACPI init
[ 1.437422] ACPI: bus type pnp registered
[ 1.440256] pnp: PnP ACPI: found 13 devices
[ 1.440258] ACPI: ACPI bus type pnp unregistered
[ 1.440268] system 00:07: ioport range 0x800-0x87f has been reserved
[ 1.440271] system 00:07: ioport range 0x880-0x8ff could not be reserved
[ 1.440273] system 00:07: ioport range 0x900-0x91f has been reserved
[ 1.440275] system 00:07: ioport range 0x920-0x923 has been reserved
[ 1.440277] system 00:07: ioport range 0x924-0x924 has been reserved
[ 1.440279] system 00:07: ioport range 0xc00-0xc7f has been reserved
[ 1.440281] system 00:07: ioport range 0xca0-0xca7 has been reserved
[ 1.440283] system 00:07: ioport range 0xca9-0xcab has been reserved
[ 1.440285] system 00:07: ioport range 0xcad-0xcaf has been reserved
[ 1.440289] system 00:08: ioport range 0xca8-0xca8 has been reserved
[ 1.440291] system 00:08: ioport range 0xcac-0xcac has been reserved
[ 1.440299] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.440303] system 00:0c: iomem range 0xfed90000-0xfed91fff has been reserved
[ 1.444940] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.444942] pci 0000:00:01.0: IO window: disabled
[ 1.444946] pci 0000:00:01.0: MEM window: 0xda000000-0xddffffff
[ 1.444949] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.444952] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.444953] pci 0000:00:03.0: IO window: disabled
[ 1.444956] pci 0000:00:03.0: MEM window: disabled
[ 1.444959] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.444962] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 1.444963] pci 0000:00:07.0: IO window: disabled
[ 1.444967] pci 0000:00:07.0: MEM window: disabled
[ 1.444969] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.444974] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.444975] pci 0000:00:1e.0: IO window: disabled
[ 1.444979] pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
[ 1.444983] pci 0000:00:1e.0: PREFETCH window: 0x000000d9800000-0x000000d9ffffff
[ 1.444994] alloc irq_desc for 53 on node -1
[ 1.444995] alloc kstat_irqs on node -1
[ 1.445001] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.445004] pci 0000:00:01.0: setting latency timer to 64
[ 1.445010] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.445013] pci 0000:00:03.0: setting latency timer to 64
[ 1.445018] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.445021] pci 0000:00:07.0: setting latency timer to 64
[ 1.445026] pci 0000:00:1e.0: setting latency timer to 64
[ 1.445030] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.445032] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.445034] pci_bus 0000:01: resource 1 mem: [0xda000000-0xddffffff]
[ 1.445036] pci_bus 0000:04: resource 1 mem: [0xde000000-0xdeffffff]
[ 1.445038] pci_bus 0000:04: resource 2 pref mem [0xd9800000-0xd9ffffff]
[ 1.445040] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 1.445041] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.445066] NET: Registered protocol family 2
[ 1.445273] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.446161] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.447664] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.447875] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.447877] TCP reno registered
[ 1.448017] NET: Registered protocol family 1
[ 1.467258] pci 0000:04:03.0: Boot video device
[ 1.467295] Trying to unpack rootfs image as initramfs...
[ 2.594120] Freeing initrd memory: 57924k freed
[ 2.603120] Scanning for low memory corruption every 60 seconds
[ 2.603221] audit: initializing netlink socket (disabled)
[ 2.603231] type=2000 audit(1258055778.490:1): initialized
[ 2.612446] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.613594] VFS: Disk quotas dquot_6.5.2
[ 2.613639] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.614123] fuse init (API version 7.13)
[ 2.614188] msgmni has been set to 15979
[ 2.614408] alg: No test for stdrng (krng)
[ 2.614415] io scheduler noop registered
[ 2.614417] io scheduler anticipatory registered
[ 2.614418] io scheduler deadline registered (default)
[ 2.614452] io scheduler cfq registered
[ 2.614544] alloc irq_desc for 56 on node -1
[ 2.614546] alloc kstat_irqs on node -1
[ 2.614553] pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
[ 2.614560] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.614649] alloc irq_desc for 57 on node -1
[ 2.614650] alloc kstat_irqs on node -1
[ 2.614656] pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
[ 2.614661] pcieport 0000:00:03.0: setting latency timer to 64
[ 2.614750] alloc irq_desc for 58 on node -1
[ 2.614752] alloc kstat_irqs on node -1
[ 2.614757] pcieport 0000:00:07.0: irq 58 for MSI/MSI-X
[ 2.614762] pcieport 0000:00:07.0: setting latency timer to 64
[ 2.615047] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 2.615078] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 2.615110] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 2.615118] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.615135] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.615221] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.615223] ACPI: Power Button [PWRF]
[ 2.615648] Monitor-Mwait will be used to enter C-1 state
[ 2.615667] Monitor-Mwait will be used to enter C-3 state
[ 2.615699] processor LNXCPU:00: registered as cooling_device0
[ 2.616049] processor LNXCPU:01: registered as cooling_device1
[ 2.616396] processor LNXCPU:02: registered as cooling_device2
[ 2.616749] processor LNXCPU:03: registered as cooling_device3
[ 2.617106] processor LNXCPU:04: registered as cooling_device4
[ 2.617454] processor LNXCPU:05: registered as cooling_device5
[ 2.617803] processor LNXCPU:06: registered as cooling_device6
[ 2.618158] processor LNXCPU:07: registered as cooling_device7
[ 2.620780] Linux agpgart interface v0.103
[ 2.620783] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.620876] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.620964] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.621164] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.621277] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.622095] brd: module loaded
[ 2.622446] loop: module loaded
[ 2.622493] input: Macintosh mouse button emulation as /devices/virtual/input/input1
[ 2.622574] ata_piix 0000:00:1f.2: version 2.13
[ 2.622584] alloc irq_desc for 23 on node -1
[ 2.622586] alloc kstat_irqs on node -1
[ 2.622590] ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 2.622594] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.622623] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.622661] scsi0 : ata_piix
[ 2.622713] scsi1 : ata_piix
[ 2.622738] ata1: SATA max UDMA/133 cmd 0xf8e0 ctl 0xf8d0 bmdma 0xfc00 irq 23
[ 2.622742] ata2: SATA max UDMA/133 cmd 0xf8e8 ctl 0xf8d4 bmdma 0xfc08 irq 23
[ 2.622756] alloc irq_desc for 22 on node -1
[ 2.622757] alloc kstat_irqs on node -1
[ 2.622761] ata_piix 0000:00:1f.5: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 2.622764] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.773523] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.773566] scsi2 : ata_piix
[ 2.773609] scsi3 : ata_piix
[ 2.773631] ata3: SATA max UDMA/133 cmd 0xf8f0 ctl 0xf8d8 bmdma 0xfc20 irq 22
[ 2.773634] ata4: SATA max UDMA/133 cmd 0xf8f8 ctl 0xf8dc bmdma 0xfc28 irq 22
[ 2.774170] Fixed MDIO Bus: probed
[ 2.774194] PPP generic driver version 2.4.2
[ 2.774249] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.774263] alloc irq_desc for 19 on node -1
[ 2.774264] alloc kstat_irqs on node -1
[ 2.774268] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.774283] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.774286] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.774318] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.774338] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.778212] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.778222] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0ff800
[ 2.794563] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.794637] usb usb1: configuration #1 chosen from 1 choice
[ 2.794658] hub 1-0:1.0: USB hub found
[ 2.794663] hub 1-0:1.0: 4 ports detected
[ 2.794702] alloc irq_desc for 21 on node -1
[ 2.794703] alloc kstat_irqs on node -1
[ 2.794707] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.794717] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.794719] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.794741] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.794760] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.798648] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.798658] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
[ 2.814526] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.814587] usb usb2: configuration #1 chosen from 1 choice
[ 2.814606] hub 2-0:1.0: USB hub found
[ 2.814610] hub 2-0:1.0: 4 ports detected
[ 2.814647] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.814657] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.814695] alloc irq_desc for 17 on node -1
[ 2.814697] alloc kstat_irqs on node -1
[ 2.814701] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.814706] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.814708] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.814731] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.814758] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000fc40
[ 2.814812] usb usb3: configuration #1 chosen from 1 choice
[ 2.814830] hub 3-0:1.0: USB hub found
[ 2.814834] hub 3-0:1.0: 2 ports detected
[ 2.814867] alloc irq_desc for 18 on node -1
[ 2.814869] alloc kstat_irqs on node -1
[ 2.814872] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.814877] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.814880] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.814900] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.814929] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000fc60
[ 2.814981] usb usb4: configuration #1 chosen from 1 choice
[ 2.814999] hub 4-0:1.0: USB hub found
[ 2.815002] hub 4-0:1.0: 2 ports detected
[ 2.815035] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.815040] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.815042] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.815061] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.815082] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000fc80
[ 2.815135] usb usb5: configuration #1 chosen from 1 choice
[ 2.815152] hub 5-0:1.0: USB hub found
[ 2.815156] hub 5-0:1.0: 2 ports detected
[ 2.815187] alloc irq_desc for 20 on node -1
[ 2.815189] alloc kstat_irqs on node -1
[ 2.815193] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.815197] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.815200] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.815219] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.815247] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000fca0
[ 2.815299] usb usb6: configuration #1 chosen from 1 choice
[ 2.815317] hub 6-0:1.0: USB hub found
[ 2.815320] hub 6-0:1.0: 2 ports detected
[ 2.815351] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.815356] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.815358] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.815385] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.815406] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000fcc0
[ 2.815457] usb usb7: configuration #1 chosen from 1 choice
[ 2.815476] hub 7-0:1.0: USB hub found
[ 2.815481] hub 7-0:1.0: 2 ports detected
[ 2.815513] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 2.815518] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.815521] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.815544] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 2.815564] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000fce0
[ 2.815618] usb usb8: configuration #1 chosen from 1 choice
[ 2.815637] hub 8-0:1.0: USB hub found
[ 2.815641] hub 8-0:1.0: 2 ports detected
[ 2.815708] PNP: No PS/2 controller found. Probing ports directly.
[ 2.818438] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.818448] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.818504] mice: PS/2 mouse device common for all mice
[ 2.818536] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 2.818556] rtc_cmos 00:04: RTC can wake from S4
[ 2.818576] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.818599] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 2.818693] device-mapper: uevent: version 1.0.3
[ 2.818748] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.818860] device-mapper: multipath: version 1.1.0 loaded
[ 2.818862] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.819222] cpuidle: using governor ladder
[ 2.819428] cpuidle: using governor menu
[ 2.819781] TCP cubic registered
[ 2.819879] NET: Registered protocol family 10
[ 2.820354] lo: Disabled Privacy Extensions
[ 2.820595] NET: Registered protocol family 17
[ 2.820607] Bluetooth: L2CAP ver 2.14
[ 2.820608] Bluetooth: L2CAP socket layer initialized
[ 2.820610] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.820611] Bluetooth: SCO socket layer initialized
[ 2.820634] Bluetooth: RFCOMM TTY layer initialized
[ 2.820636] Bluetooth: RFCOMM socket layer initialized
[ 2.820637] Bluetooth: RFCOMM ver 1.11
[ 2.822043] PM: Resume from disk failed.
[ 2.822049] registered taskstats version 1
[ 2.822454] Magic number: 1:838:950
[ 2.822464] tty tty7: hash matches
[ 2.822568] rtc_cmos 00:04: setting system clock to 2009-11-12 19:56:19 UTC (1258055779)
[ 2.822571] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.822572] EDD information not available.
[ 3.113699] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 3.134634] ata4: SATA link down (SStatus 4 SControl 0)
[ 3.264195] usb 1-3: configuration #1 chosen from 1 choice
[ 3.264423] hub 1-3:1.0: USB hub found
[ 3.264640] hub 1-3:1.0: 4 ports detected
[ 3.292580] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.312731] ata3.00: ATAPI: TEAC DVD-ROM DV28SV, D.0L, max UDMA/100
[ 3.352673] ata3.00: configured for UDMA/100
[ 3.472398] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.472416] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.472418] ata2.01: SATA link up <unknown> (SStatus 300 SControl 123)
[ 3.472430] ata2.00: link offline, clearing class 1 to NONE
[ 3.472436] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 123)
[ 3.493582] ata2.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.493586] ata2.01: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.513138] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.513142] ata1.00: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.513399] ata1.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.513403] ata1.01: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.533564] ata2.01: configured for UDMA/133
[ 3.553121] ata1.00: configured for UDMA/133
[ 3.562068] usb 2-3: new high speed USB device using ehci_hcd and address 4
[ 3.573298] ata1.01: configured for UDMA/133
[ 3.573377] scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.573546] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.573601] scsi 0:0:1:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.573632] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.573667] sd 0:0:0:0: [sda] Write Protect is off
[ 3.573669] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.573676] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 3.573731] scsi 1:0:1:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.573746] sd 0:0:1:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.573773] sd 0:0:1:0: [sdb] Write Protect is off
[ 3.573775] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.573792] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.573811] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 3.573878] sdb:
[ 3.573960] sd 1:0:1:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.573986] sd 1:0:1:0: [sdc] Write Protect is off
[ 3.573988] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.574002] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.574079] sdc:
[ 3.574150] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.579710] sdb1
[ 3.579941] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 3.579988] sda:
[ 3.589522] scsi 2:0:0:0: CD-ROM TEAC DVD-ROM DV28SV D.0L PQ: 0 ANSI: 5
[ 3.591631] sda1
[ 3.591746] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.602357] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 3.602360] Uniform CD-ROM driver Revision: 3.20
[ 3.602425] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.602453] sr 2:0:0:0: Attached scsi generic sg3 type 5
[ 3.712579] usb 2-3: configuration #1 chosen from 1 choice
[ 3.991125] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 4.033202] sdc1
[ 4.033332] sd 1:0:1:0: [sdc] Attached SCSI disk
[ 4.033346] Freeing unused kernel memory: 684k freed
[ 4.033440] Write protecting the kernel read-only data: 7656k
[ 4.164552] md: linear personality registered for level -1
[ 4.166663] md: multipath personality registered for level -4
[ 4.172111] Initializing USB Mass Storage driver...
[ 4.172228] scsi4 : SCSI emulation for USB Mass Storage devices
[ 4.172306] usbcore: registered new interface driver usb-storage
[ 4.172310] USB Mass Storage support registered.
[ 4.173035] md: raid0 personality registered for level 0
[ 4.173379] usb-storage: device found at 4
[ 4.173382] usb-storage: waiting for device to settle before scanning
[ 4.176803] md: raid1 personality registered for level 1
[ 4.178162] async_tx: api initialized (async)
[ 4.178775] xor: automatically using best checksumming function: generic_sse
[ 4.179461] usb 5-1: configuration #1 chosen from 1 choice
[ 4.189669] usbcore: registered new interface driver hiddev
[ 4.204497] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input2
[ 4.204538] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 4.204553] usbcore: registered new interface driver usbhid
[ 4.204554] usbhid: v2.6:USB HID core driver
[ 4.217692] md: bind<sdc1>
[ 4.221293] generic_sse: 8884.800 MB/sec
[ 4.221295] xor: using function: generic_sse (8884.800 MB/sec)
[ 4.275530] md: bind<sda1>
[ 4.391089] raid6: int64x1 2258 MB/s
[ 4.470322] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 4.554175] md: bind<sdb1>
[ 4.560627] raid6: int64x2 2892 MB/s
[ 4.656550] usb 5-2: configuration #1 chosen from 1 choice
[ 4.665619] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input3
[ 4.665656] generic-usb 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 4.671574] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input4
[ 4.671616] generic-usb 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 4.730429] raid6: int64x4 1996 MB/s
[ 4.900107] raid6: int64x8 2085 MB/s
[ 5.069763] raid6: sse2x1 6227 MB/s
[ 5.239423] raid6: sse2x2 7305 MB/s
[ 5.409090] raid6: sse2x4 8202 MB/s
[ 5.409092] raid6: using algorithm sse2x4 (8202 MB/s)
[ 5.413826] md: raid6 personality registered for level 6
[ 5.413828] md: raid5 personality registered for level 5
[ 5.413829] md: raid4 personality registered for level 4
[ 5.418525] md: raid10 personality registered for level 10
[ 9.162581] usb-storage: device scan complete
[ 9.165579] scsi 4:0:0:0: CD-ROM iDRAC Virtual CD 0323 PQ: 0 ANSI: 0
[ 9.168692] scsi 4:0:0:1: Direct-Access iDRAC Virtual Floppy 0323 PQ: 0 ANSI: 0 CCS
[ 9.277470] sr1: scsi3-mmc drive: 0x/0x cd/rw caddy
[ 9.277569] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 9.277616] sr 4:0:0:0: Attached scsi generic sg4 type 5
[ 9.277675] sd 4:0:0:1: Attached scsi generic sg5 type 0
[ 9.279973] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 42.699488] md: md0 stopped.
[ 42.699494] md: unbind<sdb1>
[ 42.776026] md: export_rdev(sdb1)
[ 42.776145] md: unbind<sda1>
[ 42.895779] md: export_rdev(sda1)
[ 42.895898] md: unbind<sdc1>
[ 42.975623] md: export_rdev(sdc1)
[ 43.055253] md: bind<sdb1>
[ 43.055403] md: bind<sdc1>
[ 43.055413] md: could not bd_claim sda1.
[ 43.055541] md: md_import_device returned -16
[ 43.056545] raid5: md0 is not clean -- starting background reconstruction
[ 43.056555] raid5: device sdb1 operational as raid disk 1
[ 43.056784] raid5: allocated 3230kB for md0
[ 43.056921] raid5: not enough operational devices for md0 (2/3 failed)
[ 43.057053] RAID5 conf printout:
[ 43.057054] --- rd:3 wd:1
[ 43.057056] disk 1, o:1, dev:sdb1
[ 43.057259] raid5: failed to run raid set md0
[ 43.057328] md: pers->run() failed ...
[ 43.058177] md: could not bd_claim sda1.
[ 43.058244] md: error, md_import_device() returned -16
[ 43.058248] md: could not bd_claim sda1.
[ 43.058326] md: error, md_import_device() returned -16
[-- Attachment #4: sdd-badboot.2.6.32-rc6 --]
[-- Type: application/octet-stream, Size: 55556 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-rc6 (root@morelax) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #1 SMP Thu Nov 12 14:49:01 EST 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc6 root=/dev/mapper/raid-morelax ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] BIOS-e820: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FF00000000 write-back
[ 0.000000] 4 base 0200000000 mask FFE0000000 write-back
[ 0.000000] 5 base 0220000000 mask FFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf699 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable)
[ 0.000000] modified: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] modified: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] modified: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] modified: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf699000
[ 0.000000] 0000000000 - 00cf600000 page 2M
[ 0.000000] 00cf600000 - 00cf699000 page 4k
[ 0.000000] kernel direct mapping tables up to cf699000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000
[ 0.000000] RAMDISK: 3475e000 - 37fef211
[ 0.000000] ACPI: RSDP 00000000000f1450 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f1554 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000cf6c3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cf6af000 02FEE (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cf6c6000 00040
[ 0.000000] ACPI: APIC 00000000cf6c3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000cf6c35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000cf6c362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DMAR 00000000cf6c3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000cf6c38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000cf6c3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf6c3a3c 00176 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000cf6b2170 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000cf6b23e0 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000cf6b1ff0 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000cf6b2020 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 00000000cf6c3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000cf6c3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 00000000cf6c7000 02104 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 17 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 19 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 21 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 23 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 1 0-d0000000
[ 0.000000] SRAT: Node 0 PXM 1 100000000-230000000
[ 0.000000] NUMA: Using 32 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 000000000005bfff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a01f44] TEXT DATA BSS ==> [0001000000 - 0001a01f44]
[ 0.000000] #3 [003475e000 - 0037fef211] RAMDISK ==> [003475e000 - 0037fef211]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001a02000 - 0001a0232d] BRK ==> [0001a02000 - 0001a0232d]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x000cf699
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2094644
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3831 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 831185 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 32 CPUs, 24 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf699000 - 00000000cf6af000
[ 0.000000] PM: Registered nosave memory: 00000000cf6af000 - 00000000cf6ce000
[ 0.000000] PM: Registered nosave memory: 00000000cf6ce000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88002f800000 s91224 r8192 d23464 u131072
[ 0.000000] pcpu-alloc: s91224 r8192 d23464 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063176
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc6 root=/dev/mapper/raid-morelax ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8123516k/9175040k available (5353k kernel code, 796464k absent, 255060k reserved, 3066k data, 684k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1208
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2260.923 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.84 BogoMIPS (lpj=22609230)
[ 0.000023] Security Framework initialized
[ 0.000027] SELinux: Disabled at boot.
[ 0.000552] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002327] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003103] Mount-cache hash table entries: 256
[ 0.003212] Initializing cgroup subsys ns
[ 0.003215] Initializing cgroup subsys cpuacct
[ 0.003219] Initializing cgroup subsys memory
[ 0.003224] Initializing cgroup subsys freezer
[ 0.003226] Initializing cgroup subsys net_cls
[ 0.003241] CPU: Physical Processor ID: 1
[ 0.003242] CPU: Processor Core ID: 0
[ 0.003245] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003247] CPU: L2 cache: 256K
[ 0.003248] CPU: L3 cache: 8192K
[ 0.003251] CPU 0/0x10 -> Node 0
[ 0.003253] mce: CPU supports 9 MCE banks
[ 0.003262] CPU0: Thermal monitoring enabled (TM1)
[ 0.003266] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[ 0.003273] using mwait in idle threads.
[ 0.003274] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.003279] ... version: 3
[ 0.003280] ... bit width: 48
[ 0.003281] ... generic registers: 4
[ 0.003282] ... value mask: 0000ffffffffffff
[ 0.003283] ... max period: 000000007fffffff
[ 0.003284] ... fixed-purpose events: 3
[ 0.003286] ... event mask: 000000070000000f
[ 0.005203] ACPI: Core revision 20090903
[ 0.009111] Setting APIC routing to flat
[ 0.009553] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.109359] CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.228453] Booting processor 1 APIC 0x12 ip 0x6000
[ 0.239052] Initializing CPU#1
[ 0.388035] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609628)
[ 0.388042] CPU: Physical Processor ID: 1
[ 0.388043] CPU: Processor Core ID: 1
[ 0.388045] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.388046] CPU: L2 cache: 256K
[ 0.388047] CPU: L3 cache: 8192K
[ 0.388049] CPU 1/0x12 -> Node 0
[ 0.388059] CPU1: Thermal monitoring enabled (TM1)
[ 0.388062] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.388135] CPU1: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.388141] Skipping synchronization checks as TSC is reliable.
[ 0.388212] Booting processor 2 APIC 0x14 ip 0x6000
[ 0.398559] Initializing CPU#2
[ 0.547715] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609630)
[ 0.547721] CPU: Physical Processor ID: 1
[ 0.547722] CPU: Processor Core ID: 2
[ 0.547725] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.547726] CPU: L2 cache: 256K
[ 0.547727] CPU: L3 cache: 8192K
[ 0.547729] CPU 2/0x14 -> Node 0
[ 0.547739] CPU2: Thermal monitoring enabled (TM1)
[ 0.547742] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.547791] CPU2: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.547867] Booting processor 3 APIC 0x16 ip 0x6000
[ 0.558214] Initializing CPU#3
[ 0.707394] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609635)
[ 0.707401] CPU: Physical Processor ID: 1
[ 0.707402] CPU: Processor Core ID: 3
[ 0.707404] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.707405] CPU: L2 cache: 256K
[ 0.707406] CPU: L3 cache: 8192K
[ 0.707408] CPU 3/0x16 -> Node 0
[ 0.707418] CPU3: Thermal monitoring enabled (TM1)
[ 0.707421] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.707455] CPU3: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.707529] Booting processor 4 APIC 0x11 ip 0x6000
[ 0.717877] Initializing CPU#4
[ 0.867073] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609632)
[ 0.867081] CPU: Physical Processor ID: 1
[ 0.867082] CPU: Processor Core ID: 0
[ 0.867085] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.867087] CPU: L2 cache: 256K
[ 0.867088] CPU: L3 cache: 8192K
[ 0.867090] CPU 4/0x11 -> Node 0
[ 0.867102] CPU4: Thermal monitoring enabled (TM1)
[ 0.867105] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.867123] CPU4: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.867204] Booting processor 5 APIC 0x13 ip 0x6000
[ 0.877551] Initializing CPU#5
[ 1.026753] Calibrating delay using timer specific routine.. 4521.91 BogoMIPS (lpj=22609598)
[ 1.026759] CPU: Physical Processor ID: 1
[ 1.026760] CPU: Processor Core ID: 1
[ 1.026762] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.026764] CPU: L2 cache: 256K
[ 1.026764] CPU: L3 cache: 8192K
[ 1.026766] CPU 5/0x13 -> Node 0
[ 1.026776] CPU5: Thermal monitoring enabled (TM1)
[ 1.026779] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.026798] CPU5: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.026875] Booting processor 6 APIC 0x15 ip 0x6000
[ 1.037223] Initializing CPU#6
[ 1.186432] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609625)
[ 1.186438] CPU: Physical Processor ID: 1
[ 1.186439] CPU: Processor Core ID: 2
[ 1.186441] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.186443] CPU: L2 cache: 256K
[ 1.186444] CPU: L3 cache: 8192K
[ 1.186446] CPU 6/0x15 -> Node 0
[ 1.186456] CPU6: Thermal monitoring enabled (TM1)
[ 1.186458] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.186555] CPU6: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.186635] Booting processor 7 APIC 0x17 ip 0x6000
[ 1.196982] Initializing CPU#7
[ 1.346111] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609616)
[ 1.346118] CPU: Physical Processor ID: 1
[ 1.346119] CPU: Processor Core ID: 3
[ 1.346121] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.346122] CPU: L2 cache: 256K
[ 1.346123] CPU: L3 cache: 8192K
[ 1.346125] CPU 7/0x17 -> Node 0
[ 1.346135] CPU7: Thermal monitoring enabled (TM1)
[ 1.346138] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.346214] CPU7: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.346233] Brought up 8 CPUs
[ 1.346236] Total of 8 processors activated (36175.31 BogoMIPS).
[ 1.349935] CPU0 attaching sched-domain:
[ 1.349938] domain 0: span 0,4 level SIBLING
[ 1.349940] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 1.349944] domain 1: span 0-7 level MC
[ 1.349946] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.349954] CPU1 attaching sched-domain:
[ 1.349956] domain 0: span 1,5 level SIBLING
[ 1.349957] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 1.349961] domain 1: span 0-7 level MC
[ 1.349963] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.349969] CPU2 attaching sched-domain:
[ 1.349971] domain 0: span 2,6 level SIBLING
[ 1.349972] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 1.349976] domain 1: span 0-7 level MC
[ 1.349978] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.349984] CPU3 attaching sched-domain:
[ 1.349986] domain 0: span 3,7 level SIBLING
[ 1.349987] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 1.349991] domain 1: span 0-7 level MC
[ 1.349993] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.349999] CPU4 attaching sched-domain:
[ 1.350001] domain 0: span 0,4 level SIBLING
[ 1.350002] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 1.350006] domain 1: span 0-7 level MC
[ 1.350007] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.350014] CPU5 attaching sched-domain:
[ 1.350015] domain 0: span 1,5 level SIBLING
[ 1.350017] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 1.350021] domain 1: span 0-7 level MC
[ 1.350022] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.350029] CPU6 attaching sched-domain:
[ 1.350030] domain 0: span 2,6 level SIBLING
[ 1.350032] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 1.350035] domain 1: span 0-7 level MC
[ 1.350037] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.350044] CPU7 attaching sched-domain:
[ 1.350045] domain 0: span 3,7 level SIBLING
[ 1.350047] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 1.350050] domain 1: span 0-7 level MC
[ 1.350052] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.350615] regulator: core version 0.5
[ 1.350638] Time: 20:14:41 Date: 11/12/09
[ 1.350677] NET: Registered protocol family 16
[ 1.350763] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.350766] ACPI: bus type pci registered
[ 1.350825] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.350828] PCI: MCFG area at e0000000 reserved in E820
[ 1.356769] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.356771] PCI: Using configuration type 1 for base access
[ 1.357445] bio: create slab <bio-0> at 0
[ 1.357937] ACPI: EC: Look up EC in DSDT
[ 1.359715] ACPI: BIOS _OSI(Linux) query ignored
[ 1.359815] ACPI: Interpreter enabled
[ 1.359818] ACPI: (supports S0 S4 S5)
[ 1.359830] ACPI: Using IOAPIC for interrupt routing
[ 1.363341] ACPI: No dock devices found.
[ 1.363662] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.363733] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.363736] pci 0000:00:00.0: PME# disabled
[ 1.363795] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.363798] pci 0000:00:01.0: PME# disabled
[ 1.363857] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.363860] pci 0000:00:03.0: PME# disabled
[ 1.363920] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.363923] pci 0000:00:07.0: PME# disabled
[ 1.364112] pci 0000:00:1a.0: reg 20 io port: [0xfc40-0xfc5f]
[ 1.364176] pci 0000:00:1a.1: reg 20 io port: [0xfc60-0xfc7f]
[ 1.364244] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0ff800-0xdf0ffbff]
[ 1.364295] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.364299] pci 0000:00:1a.7: PME# disabled
[ 1.364347] pci 0000:00:1d.0: reg 20 io port: [0xfc80-0xfc9f]
[ 1.364411] pci 0000:00:1d.1: reg 20 io port: [0xfca0-0xfcbf]
[ 1.364475] pci 0000:00:1d.2: reg 20 io port: [0xfcc0-0xfcdf]
[ 1.364538] pci 0000:00:1d.3: reg 20 io port: [0xfce0-0xfcff]
[ 1.364604] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ffc00-0xdf0fffff]
[ 1.364655] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.364659] pci 0000:00:1d.7: PME# disabled
[ 1.364773] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 1.364777] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 1.364780] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 1.364783] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 1.364786] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 1.364835] pci 0000:00:1f.2: reg 10 io port: [0xf8e0-0xf8e7]
[ 1.364840] pci 0000:00:1f.2: reg 14 io port: [0xf8d0-0xf8d3]
[ 1.364845] pci 0000:00:1f.2: reg 18 io port: [0xf8e8-0xf8ef]
[ 1.364850] pci 0000:00:1f.2: reg 1c io port: [0xf8d4-0xf8d7]
[ 1.364855] pci 0000:00:1f.2: reg 20 io port: [0xfc00-0xfc0f]
[ 1.364860] pci 0000:00:1f.2: reg 24 io port: [0xfc10-0xfc1f]
[ 1.364913] pci 0000:00:1f.5: reg 10 io port: [0xf8f0-0xf8f7]
[ 1.364918] pci 0000:00:1f.5: reg 14 io port: [0xf8d8-0xf8db]
[ 1.364923] pci 0000:00:1f.5: reg 18 io port: [0xf8f8-0xf8ff]
[ 1.364928] pci 0000:00:1f.5: reg 1c io port: [0xf8dc-0xf8df]
[ 1.364933] pci 0000:00:1f.5: reg 20 io port: [0xfc20-0xfc2f]
[ 1.364938] pci 0000:00:1f.5: reg 24 io port: [0xfc30-0xfc3f]
[ 1.365007] pci 0000:01:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 1.365055] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.365059] pci 0000:01:00.0: PME# disabled
[ 1.365107] pci 0000:01:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 1.365155] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 1.365158] pci 0000:01:00.1: PME# disabled
[ 1.365193] pci 0000:00:01.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 1.365284] pci 0000:04:03.0: reg 10 32bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.365290] pci 0000:04:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
[ 1.365297] pci 0000:04:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
[ 1.365316] pci 0000:04:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 1.365372] pci 0000:00:1e.0: transparent bridge
[ 1.365377] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
[ 1.365382] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.365398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.365779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 1.365855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 1.365929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 1.366010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 1.368143] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 1.368239] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.368333] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.368427] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.368520] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 1.368613] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 1.368706] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.368800] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.368883] vgaarb: device added: PCI:0000:04:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.368885] vgaarb: loaded
[ 1.368956] SCSI subsystem initialized
[ 1.369063] libata version 3.00 loaded.
[ 1.369114] usbcore: registered new interface driver usbfs
[ 1.369124] usbcore: registered new interface driver hub
[ 1.369146] usbcore: registered new device driver usb
[ 1.369233] ACPI: WMI: Mapper loaded
[ 1.369234] PCI: Using ACPI for IRQ routing
[ 1.369353] Bluetooth: Core ver 2.15
[ 1.369376] NET: Registered protocol family 31
[ 1.369377] Bluetooth: HCI device and connection manager initialized
[ 1.369379] Bluetooth: HCI socket layer initialized
[ 1.369381] NetLabel: Initializing
[ 1.369382] NetLabel: domain hash size = 128
[ 1.369383] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.369393] NetLabel: unlabeled traffic allowed by default
[ 1.369420] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.369424] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.436001] Switching to clocksource tsc
[ 1.437403] pnp: PnP ACPI init
[ 1.437413] ACPI: bus type pnp registered
[ 1.440246] pnp: PnP ACPI: found 13 devices
[ 1.440248] ACPI: ACPI bus type pnp unregistered
[ 1.440259] system 00:07: ioport range 0x800-0x87f has been reserved
[ 1.440261] system 00:07: ioport range 0x880-0x8ff could not be reserved
[ 1.440263] system 00:07: ioport range 0x900-0x91f has been reserved
[ 1.440265] system 00:07: ioport range 0x920-0x923 has been reserved
[ 1.440267] system 00:07: ioport range 0x924-0x924 has been reserved
[ 1.440269] system 00:07: ioport range 0xc00-0xc7f has been reserved
[ 1.440271] system 00:07: ioport range 0xca0-0xca7 has been reserved
[ 1.440273] system 00:07: ioport range 0xca9-0xcab has been reserved
[ 1.440275] system 00:07: ioport range 0xcad-0xcaf has been reserved
[ 1.440279] system 00:08: ioport range 0xca8-0xca8 has been reserved
[ 1.440281] system 00:08: ioport range 0xcac-0xcac has been reserved
[ 1.440289] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.440293] system 00:0c: iomem range 0xfed90000-0xfed91fff has been reserved
[ 1.444931] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.444932] pci 0000:00:01.0: IO window: disabled
[ 1.444936] pci 0000:00:01.0: MEM window: 0xda000000-0xddffffff
[ 1.444939] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.444942] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.444944] pci 0000:00:03.0: IO window: disabled
[ 1.444947] pci 0000:00:03.0: MEM window: disabled
[ 1.444950] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.444952] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 1.444954] pci 0000:00:07.0: IO window: disabled
[ 1.444957] pci 0000:00:07.0: MEM window: disabled
[ 1.444960] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.444964] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.444966] pci 0000:00:1e.0: IO window: disabled
[ 1.444970] pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
[ 1.444973] pci 0000:00:1e.0: PREFETCH window: 0x000000d9800000-0x000000d9ffffff
[ 1.444984] alloc irq_desc for 53 on node -1
[ 1.444985] alloc kstat_irqs on node -1
[ 1.444991] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.444994] pci 0000:00:01.0: setting latency timer to 64
[ 1.445000] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.445003] pci 0000:00:03.0: setting latency timer to 64
[ 1.445009] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.445012] pci 0000:00:07.0: setting latency timer to 64
[ 1.445017] pci 0000:00:1e.0: setting latency timer to 64
[ 1.445020] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.445022] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.445024] pci_bus 0000:01: resource 1 mem: [0xda000000-0xddffffff]
[ 1.445026] pci_bus 0000:04: resource 1 mem: [0xde000000-0xdeffffff]
[ 1.445028] pci_bus 0000:04: resource 2 pref mem [0xd9800000-0xd9ffffff]
[ 1.445030] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 1.445032] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.445056] NET: Registered protocol family 2
[ 1.445262] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.446149] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.447653] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.447856] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.447858] TCP reno registered
[ 1.447998] NET: Registered protocol family 1
[ 1.467249] pci 0000:04:03.0: Boot video device
[ 1.467286] Trying to unpack rootfs image as initramfs...
[ 2.594441] Freeing initrd memory: 57924k freed
[ 2.603431] Scanning for low memory corruption every 60 seconds
[ 2.603533] audit: initializing netlink socket (disabled)
[ 2.603543] type=2000 audit(1258056882.490:1): initialized
[ 2.612759] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.613907] VFS: Disk quotas dquot_6.5.2
[ 2.613951] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.614440] fuse init (API version 7.13)
[ 2.614506] msgmni has been set to 15979
[ 2.614723] alg: No test for stdrng (krng)
[ 2.614730] io scheduler noop registered
[ 2.614732] io scheduler anticipatory registered
[ 2.614733] io scheduler deadline registered (default)
[ 2.614767] io scheduler cfq registered
[ 2.614863] alloc irq_desc for 56 on node -1
[ 2.614865] alloc kstat_irqs on node -1
[ 2.614873] pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
[ 2.614879] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.614969] alloc irq_desc for 57 on node -1
[ 2.614970] alloc kstat_irqs on node -1
[ 2.614976] pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
[ 2.614981] pcieport 0000:00:03.0: setting latency timer to 64
[ 2.615070] alloc irq_desc for 58 on node -1
[ 2.615072] alloc kstat_irqs on node -1
[ 2.615077] pcieport 0000:00:07.0: irq 58 for MSI/MSI-X
[ 2.615082] pcieport 0000:00:07.0: setting latency timer to 64
[ 2.615363] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 2.615394] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 2.615425] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 2.615433] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.615451] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.615536] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.615539] ACPI: Power Button [PWRF]
[ 2.615964] Monitor-Mwait will be used to enter C-1 state
[ 2.615982] Monitor-Mwait will be used to enter C-3 state
[ 2.616014] processor LNXCPU:00: registered as cooling_device0
[ 2.616364] processor LNXCPU:01: registered as cooling_device1
[ 2.616711] processor LNXCPU:02: registered as cooling_device2
[ 2.617064] processor LNXCPU:03: registered as cooling_device3
[ 2.617420] processor LNXCPU:04: registered as cooling_device4
[ 2.617767] processor LNXCPU:05: registered as cooling_device5
[ 2.618116] processor LNXCPU:06: registered as cooling_device6
[ 2.618473] processor LNXCPU:07: registered as cooling_device7
[ 2.621095] Linux agpgart interface v0.103
[ 2.621098] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.621191] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.621279] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.621478] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.621591] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.622410] brd: module loaded
[ 2.622762] loop: module loaded
[ 2.622808] input: Macintosh mouse button emulation as /devices/virtual/input/input1
[ 2.622890] ata_piix 0000:00:1f.2: version 2.13
[ 2.622900] alloc irq_desc for 23 on node -1
[ 2.622901] alloc kstat_irqs on node -1
[ 2.622906] ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 2.622910] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.622939] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.622976] scsi0 : ata_piix
[ 2.623028] scsi1 : ata_piix
[ 2.623052] ata1: SATA max UDMA/133 cmd 0xf8e0 ctl 0xf8d0 bmdma 0xfc00 irq 23
[ 2.623057] ata2: SATA max UDMA/133 cmd 0xf8e8 ctl 0xf8d4 bmdma 0xfc08 irq 23
[ 2.623070] alloc irq_desc for 22 on node -1
[ 2.623072] alloc kstat_irqs on node -1
[ 2.623075] ata_piix 0000:00:1f.5: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 2.623079] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.773444] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.773487] scsi2 : ata_piix
[ 2.773528] scsi3 : ata_piix
[ 2.773551] ata3: SATA max UDMA/133 cmd 0xf8f0 ctl 0xf8d8 bmdma 0xfc20 irq 22
[ 2.773554] ata4: SATA max UDMA/133 cmd 0xf8f8 ctl 0xf8dc bmdma 0xfc28 irq 22
[ 2.774089] Fixed MDIO Bus: probed
[ 2.774112] PPP generic driver version 2.4.2
[ 2.774168] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.774181] alloc irq_desc for 19 on node -1
[ 2.774183] alloc kstat_irqs on node -1
[ 2.774187] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.774201] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.774204] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.774237] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.774258] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.778133] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.778143] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0ff800
[ 2.794481] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.794556] usb usb1: configuration #1 chosen from 1 choice
[ 2.794576] hub 1-0:1.0: USB hub found
[ 2.794581] hub 1-0:1.0: 4 ports detected
[ 2.794620] alloc irq_desc for 21 on node -1
[ 2.794622] alloc kstat_irqs on node -1
[ 2.794626] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.794635] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.794638] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.794660] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.794679] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.798568] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.798578] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
[ 2.814443] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.814503] usb usb2: configuration #1 chosen from 1 choice
[ 2.814522] hub 2-0:1.0: USB hub found
[ 2.814526] hub 2-0:1.0: 4 ports detected
[ 2.814563] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.814573] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.814612] alloc irq_desc for 17 on node -1
[ 2.814613] alloc kstat_irqs on node -1
[ 2.814617] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.814622] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.814625] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.814648] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.814675] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000fc40
[ 2.814728] usb usb3: configuration #1 chosen from 1 choice
[ 2.814746] hub 3-0:1.0: USB hub found
[ 2.814751] hub 3-0:1.0: 2 ports detected
[ 2.814784] alloc irq_desc for 18 on node -1
[ 2.814786] alloc kstat_irqs on node -1
[ 2.814789] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.814794] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.814796] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.814817] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.814846] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000fc60
[ 2.814898] usb usb4: configuration #1 chosen from 1 choice
[ 2.814915] hub 4-0:1.0: USB hub found
[ 2.814919] hub 4-0:1.0: 2 ports detected
[ 2.814951] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.814956] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.814959] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.814978] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.814998] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000fc80
[ 2.815051] usb usb5: configuration #1 chosen from 1 choice
[ 2.815068] hub 5-0:1.0: USB hub found
[ 2.815072] hub 5-0:1.0: 2 ports detected
[ 2.815104] alloc irq_desc for 20 on node -1
[ 2.815105] alloc kstat_irqs on node -1
[ 2.815109] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.815114] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.815116] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.815135] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.815163] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000fca0
[ 2.815215] usb usb6: configuration #1 chosen from 1 choice
[ 2.815233] hub 6-0:1.0: USB hub found
[ 2.815237] hub 6-0:1.0: 2 ports detected
[ 2.815268] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.815273] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.815275] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.815302] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.815323] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000fcc0
[ 2.815374] usb usb7: configuration #1 chosen from 1 choice
[ 2.815392] hub 7-0:1.0: USB hub found
[ 2.815398] hub 7-0:1.0: 2 ports detected
[ 2.815430] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 2.815435] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.815437] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.815460] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 2.815481] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000fce0
[ 2.815535] usb usb8: configuration #1 chosen from 1 choice
[ 2.815554] hub 8-0:1.0: USB hub found
[ 2.815557] hub 8-0:1.0: 2 ports detected
[ 2.815625] PNP: No PS/2 controller found. Probing ports directly.
[ 2.818359] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.818368] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.818425] mice: PS/2 mouse device common for all mice
[ 2.818457] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 2.818477] rtc_cmos 00:04: RTC can wake from S4
[ 2.818497] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.818520] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 2.818614] device-mapper: uevent: version 1.0.3
[ 2.818670] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.818781] device-mapper: multipath: version 1.1.0 loaded
[ 2.818783] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.819145] cpuidle: using governor ladder
[ 2.819350] cpuidle: using governor menu
[ 2.819703] TCP cubic registered
[ 2.819801] NET: Registered protocol family 10
[ 2.820276] lo: Disabled Privacy Extensions
[ 2.820517] NET: Registered protocol family 17
[ 2.820529] Bluetooth: L2CAP ver 2.14
[ 2.820530] Bluetooth: L2CAP socket layer initialized
[ 2.820532] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.820533] Bluetooth: SCO socket layer initialized
[ 2.820549] Bluetooth: RFCOMM TTY layer initialized
[ 2.820551] Bluetooth: RFCOMM socket layer initialized
[ 2.820552] Bluetooth: RFCOMM ver 1.11
[ 2.821982] PM: Resume from disk failed.
[ 2.821989] registered taskstats version 1
[ 2.822394] Magic number: 1:223:245
[ 2.822509] rtc_cmos 00:04: setting system clock to 2009-11-12 20:14:43 UTC (1258056883)
[ 2.822511] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.822512] EDD information not available.
[ 3.113607] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 3.134589] ata4: SATA link down (SStatus 4 SControl 0)
[ 3.264116] usb 1-3: configuration #1 chosen from 1 choice
[ 3.264344] hub 1-3:1.0: USB hub found
[ 3.264561] hub 1-3:1.0: 4 ports detected
[ 3.282485] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.302622] ata3.00: ATAPI: TEAC DVD-ROM DV28SV, D.0L, max UDMA/100
[ 3.342584] ata3.00: configured for UDMA/100
[ 3.561938] usb 2-3: new high speed USB device using ehci_hcd and address 4
[ 3.712673] usb 2-3: configuration #1 chosen from 1 choice
[ 3.991046] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 4.168390] usb 5-1: configuration #1 chosen from 1 choice
[ 4.450122] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 4.490220] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.490238] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.490241] ata1.01: SATA link up <unknown> (SStatus 300 SControl 123)
[ 4.490256] ata2.01: SATA link down (SStatus 123 SControl 301)
[ 4.511024] ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 4.511028] ata2.00: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 4.530985] ata2.00: configured for UDMA/133
[ 4.550610] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 4.550614] ata1.00: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 4.550873] ata1.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 4.550877] ata1.01: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 4.570604] ata1.00: configured for UDMA/133
[ 4.590391] ata1.01: configured for UDMA/133
[ 4.590470] scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 4.590643] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.590694] scsi 0:0:1:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 4.590768] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 4.590783] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 4.590824] scsi 1:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 4.590851] sd 0:0:0:0: [sda] Write Protect is off
[ 4.590853] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.590877] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.590887] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 4.590955] sd 1:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 4.590982] sd 1:0:0:0: [sdc] Write Protect is off
[ 4.590983] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.590998] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.591089] sda:
[ 4.591165] sdc: sdc1
[ 4.603422] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 4.604921] sd 0:0:1:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 4.604926] sda1
[ 4.604975] sd 0:0:1:0: [sdb] Write Protect is off
[ 4.604977] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.604991] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.605070] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.605083] sdb:
[ 4.606220] scsi 2:0:0:0: CD-ROM TEAC DVD-ROM DV28SV D.0L PQ: 0 ANSI: 5
[ 4.616912] sdb1
[ 4.617042] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 4.619020] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 4.619024] Uniform CD-ROM driver Revision: 3.20
[ 4.619088] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.619116] sr 2:0:0:0: Attached scsi generic sg3 type 5
[ 4.619136] Freeing unused kernel memory: 684k freed
[ 4.619231] Write protecting the kernel read-only data: 7656k
[ 4.621521] usb 5-2: configuration #1 chosen from 1 choice
[ 4.744264] md: linear personality registered for level -1
[ 4.746683] md: multipath personality registered for level -4
[ 4.751626] usbcore: registered new interface driver hiddev
[ 4.757870] Initializing USB Mass Storage driver...
[ 4.757959] scsi4 : SCSI emulation for USB Mass Storage devices
[ 4.758016] usb-storage: device found at 4
[ 4.758019] usb-storage: waiting for device to settle before scanning
[ 4.758036] usbcore: registered new interface driver usb-storage
[ 4.758038] USB Mass Storage support registered.
[ 4.760349] md: raid0 personality registered for level 0
[ 4.762722] md: raid1 personality registered for level 1
[ 4.764029] async_tx: api initialized (async)
[ 4.764642] xor: automatically using best checksumming function: generic_sse
[ 4.766332] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input2
[ 4.766392] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 4.771272] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input3
[ 4.771319] generic-usb 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 4.775258] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input4
[ 4.775319] generic-usb 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 4.775340] usbcore: registered new interface driver usbhid
[ 4.775344] usbhid: v2.6:USB HID core driver
[ 4.803631] md: bind<sdc1>
[ 4.810252] generic_sse: 8958.400 MB/sec
[ 4.810254] xor: using function: generic_sse (8958.400 MB/sec)
[ 4.838740] md: bind<sda1>
[ 4.840105] md: bind<sdb1>
[ 4.979945] raid6: int64x1 2287 MB/s
[ 5.149577] raid6: int64x2 2978 MB/s
[ 5.319264] raid6: int64x4 1998 MB/s
[ 5.488952] raid6: int64x8 2086 MB/s
[ 5.658612] raid6: sse2x1 6237 MB/s
[ 5.828237] raid6: sse2x2 7302 MB/s
[ 5.997919] raid6: sse2x4 8270 MB/s
[ 5.997921] raid6: using algorithm sse2x4 (8270 MB/s)
[ 6.002574] md: raid6 personality registered for level 6
[ 6.002576] md: raid5 personality registered for level 5
[ 6.002577] md: raid4 personality registered for level 4
[ 6.007215] md: raid10 personality registered for level 10
[ 6.040896] raid5: md0 is not clean -- starting background reconstruction
[ 6.040905] raid5: device sdb1 operational as raid disk 1
[ 6.040907] raid5: device sda1 operational as raid disk 0
[ 6.040908] raid5: device sdc1 operational as raid disk 2
[ 6.041129] raid5: allocated 3230kB for md0
[ 6.041250] raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
[ 6.041252] RAID5 conf printout:
[ 6.041253] --- rd:3 wd:3
[ 6.041255] disk 0, o:1, dev:sda1
[ 6.041256] disk 1, o:1, dev:sdb1
[ 6.041258] disk 2, o:1, dev:sdc1
[ 6.041277] md0: detected capacity change from 0 to 3000598396928
[ 6.041497] md: resync of RAID array md0
[ 6.041499] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 6.041500] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 6.041508] md: using 128k window, over a total of 1465135936 blocks.
[ 6.041510] md: resuming resync of md0 from checkpoint.
[ 6.042018] md0: unknown partition table
[ 6.465942] PM: Starting manual resume from disk
[ 6.465945] PM: Resume from partition 252:1
[ 6.465946] PM: Checking hibernation image.
[ 6.466139] PM: Error -22 checking image file
[ 6.466142] PM: Resume from disk failed.
[ 6.494993] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 7.428077] Adding 974840k swap on /dev/mapper/raid-morelax_swap. Priority:-1 extents:1 across:974840k
[ 7.694216] udev: starting version 147
[ 8.476086] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 8.801908] lp: driver loaded but no devices found
[ 9.002606] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
[ 9.002620] alloc irq_desc for 36 on node -1
[ 9.002622] alloc kstat_irqs on node -1
[ 9.002628] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 9.002634] bnx2 0000:01:00.0: setting latency timer to 64
[ 9.002810] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 9.035262] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.230279] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 9.259145] eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 36, node addr 00:26:b9:3c:e0:bc
[ 9.259167] alloc irq_desc for 48 on node -1
[ 9.259168] alloc kstat_irqs on node -1
[ 9.259175] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
[ 9.259181] bnx2 0000:01:00.1: setting latency timer to 64
[ 9.259308] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 9.261792] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 9.264358] eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 48, node addr 00:26:b9:3c:e0:bd
[ 9.642215] alloc irq_desc for 59 on node -1
[ 9.642218] alloc kstat_irqs on node -1
[ 9.642224] bnx2 0000:01:00.0: irq 59 for MSI/MSI-X
[ 9.642225] alloc irq_desc for 60 on node -1
[ 9.642226] alloc kstat_irqs on node -1
[ 9.642229] bnx2 0000:01:00.0: irq 60 for MSI/MSI-X
[ 9.642231] alloc irq_desc for 61 on node -1
[ 9.642232] alloc kstat_irqs on node -1
[ 9.642234] bnx2 0000:01:00.0: irq 61 for MSI/MSI-X
[ 9.642236] alloc irq_desc for 62 on node -1
[ 9.642237] alloc kstat_irqs on node -1
[ 9.642239] bnx2 0000:01:00.0: irq 62 for MSI/MSI-X
[ 9.642241] alloc irq_desc for 63 on node -1
[ 9.642242] alloc kstat_irqs on node -1
[ 9.642244] bnx2 0000:01:00.0: irq 63 for MSI/MSI-X
[ 9.642246] alloc irq_desc for 64 on node -1
[ 9.642247] alloc kstat_irqs on node -1
[ 9.642249] bnx2 0000:01:00.0: irq 64 for MSI/MSI-X
[ 9.642251] alloc irq_desc for 65 on node -1
[ 9.642252] alloc kstat_irqs on node -1
[ 9.642254] bnx2 0000:01:00.0: irq 65 for MSI/MSI-X
[ 9.642255] alloc irq_desc for 66 on node -1
[ 9.642257] alloc kstat_irqs on node -1
[ 9.642259] bnx2 0000:01:00.0: irq 66 for MSI/MSI-X
[ 9.642260] alloc irq_desc for 67 on node -1
[ 9.642262] alloc kstat_irqs on node -1
[ 9.642264] bnx2 0000:01:00.0: irq 67 for MSI/MSI-X
[ 9.721396] bnx2: eth0: using MSIX
[ 9.722010] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.740769] usb-storage: device scan complete
[ 9.743750] scsi 4:0:0:0: CD-ROM iDRAC Virtual CD 0323 PQ: 0 ANSI: 0
[ 9.746862] scsi 4:0:0:1: Direct-Access iDRAC Virtual Floppy 0323 PQ: 0 ANSI: 0 CCS
[ 9.856393] sr1: scsi3-mmc drive: 0x/0x cd/rw caddy
[ 9.856489] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 9.856532] sr 4:0:0:0: Attached scsi generic sg4 type 5
[ 9.856599] sd 4:0:0:1: Attached scsi generic sg5 type 0
[ 9.859753] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 11.439034] bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex
[ 11.439683] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.367783] eth0: no IPv6 routers present
next prev parent reply other threads:[~2009-12-01 7:37 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-12 19:43 Intermittent SATA failures ("link offline, clearing class 1 to NONE") Alex Vandiver
2009-12-01 6:04 ` Tejun Heo
2009-12-01 7:37 ` Alex Vandiver [this message]
2009-12-01 8:12 ` Tejun Heo
2009-12-01 8:31 ` Tejun Heo
2009-12-01 22:02 ` Alex Vandiver
2009-12-02 1:43 ` Tejun Heo
2009-12-02 17:45 ` Alex Vandiver
2009-12-03 0:19 ` Tejun Heo
2009-12-03 0:42 ` Tejun Heo
2009-12-18 23:26 ` Alex Vandiver
2009-12-21 4:50 ` Tejun Heo
2009-12-21 19:13 ` Alex Vandiver
2009-12-22 0:06 ` Tejun Heo
[not found] <r2qf7a305db1004270252le438bd88vb3ca3d9b753651a9@mail.gmail.com>
[not found] ` <g2lf7a305db1004270255t5d50de0n1dc21fdc7b191d92@mail.gmail.com>
2010-05-17 9:52 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1259652273-sup-686@utwig \
--to=alex@chmrr.net \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).