From: Alex Vandiver <alex@chmrr.net>
To: Tejun Heo <tj@kernel.org>
Cc: linux-ide <linux-ide@vger.kernel.org>
Subject: Re: Intermittent SATA failures ("link offline, clearing class 1 to NONE")
Date: Tue, 01 Dec 2009 17:02:52 -0500 [thread overview]
Message-ID: <1259704924-sup-4007@utwig> (raw)
In-Reply-To: <4B14D454.7010300@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 209 bytes --]
At Tue Dec 01 03:31:16 -0500 2009, Tejun Heo wrote:
> Can you please apply the attached patch and post the good and bad boot
> logs?
Attached.
- Alex
--
Networking -- only one letter away from not working
[-- Attachment #2: goodboot.2.6.32-rc8-debug --]
[-- Type: application/octet-stream, Size: 57970 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-rc8 (root@morelax) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #2 SMP Tue Dec 1 16:03:38 EST 2009
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-rc8 root=/dev/mapper/raid-morelax ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] BIOS-e820: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FF00000000 write-back
[ 0.000000] 4 base 0200000000 mask FFE0000000 write-back
[ 0.000000] 5 base 0220000000 mask FFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf699 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable)
[ 0.000000] modified: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] modified: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] modified: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] modified: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf699000
[ 0.000000] 0000000000 - 00cf600000 page 2M
[ 0.000000] 00cf600000 - 00cf699000 page 4k
[ 0.000000] kernel direct mapping tables up to cf699000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000
[ 0.000000] RAMDISK: 3475b000 - 37fefddf
[ 0.000000] ACPI: RSDP 00000000000f1450 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f1554 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000cf6c3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cf6af000 02FEE (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cf6c6000 00040
[ 0.000000] ACPI: APIC 00000000cf6c3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000cf6c35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000cf6c362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DMAR 00000000cf6c3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000cf6c38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000cf6c3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf6c3a3c 00176 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000cf6b2170 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000cf6b23e0 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000cf6b1ff0 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000cf6b2020 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 00000000cf6c3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000cf6c3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 00000000cf6c7000 02104 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 17 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 19 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 21 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 23 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 1 0-d0000000
[ 0.000000] SRAT: Node 0 PXM 1 100000000-230000000
[ 0.000000] NUMA: Using 32 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 000000000005bfff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a03784] TEXT DATA BSS ==> [0001000000 - 0001a03784]
[ 0.000000] #3 [003475b000 - 0037fefddf] RAMDISK ==> [003475b000 - 0037fefddf]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001a04000 - 0001a0432d] BRK ==> [0001a04000 - 0001a0432d]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x000cf699
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2094644
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3831 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 831185 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 32 CPUs, 24 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf699000 - 00000000cf6af000
[ 0.000000] PM: Registered nosave memory: 00000000cf6af000 - 00000000cf6ce000
[ 0.000000] PM: Registered nosave memory: 00000000cf6ce000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88002f800000 s91288 r8192 d23400 u131072
[ 0.000000] pcpu-alloc: s91288 r8192 d23400 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063176
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-rc8 root=/dev/mapper/raid-morelax ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8123496k/9175040k available (5356k kernel code, 796464k absent, 255080k reserved, 3063k data, 688k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1208
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2261.233 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.46 BogoMIPS (lpj=22612330)
[ 0.000155] Security Framework initialized
[ 0.000223] SELinux: Disabled at boot.
[ 0.000811] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002663] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003513] Mount-cache hash table entries: 256
[ 0.003686] Initializing cgroup subsys ns
[ 0.003753] Initializing cgroup subsys cpuacct
[ 0.003822] Initializing cgroup subsys memory
[ 0.003891] Initializing cgroup subsys freezer
[ 0.003957] Initializing cgroup subsys net_cls
[ 0.004036] CPU: Physical Processor ID: 1
[ 0.004101] CPU: Processor Core ID: 0
[ 0.004167] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004277] CPU: L2 cache: 256K
[ 0.004340] CPU: L3 cache: 8192K
[ 0.004404] CPU 0/0x10 -> Node 0
[ 0.004469] mce: CPU supports 9 MCE banks
[ 0.004542] CPU0: Thermal monitoring enabled (TM1)
[ 0.004610] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.004944] using mwait in idle threads.
[ 0.005009] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.005168] ... version: 3
[ 0.005232] ... bit width: 48
[ 0.005297] ... generic registers: 4
[ 0.005362] ... value mask: 0000ffffffffffff
[ 0.005429] ... max period: 000000007fffffff
[ 0.005495] ... fixed-purpose events: 3
[ 0.005560] ... event mask: 000000070000000f
[ 0.007562] ACPI: Core revision 20090903
[ 0.011521] Setting APIC routing to flat
[ 0.012026] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.111913] CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.227159] Booting processor 1 APIC 0x12 ip 0x6000
[ 0.237823] Initializing CPU#1
[ 0.386741] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609628)
[ 0.386748] CPU: Physical Processor ID: 1
[ 0.386749] CPU: Processor Core ID: 1
[ 0.386751] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.386752] CPU: L2 cache: 256K
[ 0.386753] CPU: L3 cache: 8192K
[ 0.386755] CPU 1/0x12 -> Node 0
[ 0.386766] CPU1: Thermal monitoring enabled (TM1)
[ 0.386769] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.386807] CPU1: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.387627] Skipping synchronization checks as TSC is reliable.
[ 0.387764] Booting processor 2 APIC 0x14 ip 0x6000
[ 0.398178] Initializing CPU#2
[ 0.546420] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609632)
[ 0.546427] CPU: Physical Processor ID: 1
[ 0.546428] CPU: Processor Core ID: 2
[ 0.546430] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.546432] CPU: L2 cache: 256K
[ 0.546433] CPU: L3 cache: 8192K
[ 0.546434] CPU 2/0x14 -> Node 0
[ 0.546445] CPU2: Thermal monitoring enabled (TM1)
[ 0.546448] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.546517] CPU2: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.547406] Booting processor 3 APIC 0x16 ip 0x6000
[ 0.557820] Initializing CPU#3
[ 0.706100] Calibrating delay using timer specific routine.. 4521.93 BogoMIPS (lpj=22609650)
[ 0.706106] CPU: Physical Processor ID: 1
[ 0.706107] CPU: Processor Core ID: 3
[ 0.706110] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.706111] CPU: L2 cache: 256K
[ 0.706112] CPU: L3 cache: 8192K
[ 0.706114] CPU 3/0x16 -> Node 0
[ 0.706124] CPU3: Thermal monitoring enabled (TM1)
[ 0.706127] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.706153] CPU3: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.707040] Booting processor 4 APIC 0x11 ip 0x6000
[ 0.717126] Initializing CPU#4
[ 0.865779] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609614)
[ 0.865787] CPU: Physical Processor ID: 1
[ 0.865789] CPU: Processor Core ID: 0
[ 0.865791] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.865793] CPU: L2 cache: 256K
[ 0.865794] CPU: L3 cache: 8192K
[ 0.865797] CPU 4/0x11 -> Node 0
[ 0.865808] CPU4: Thermal monitoring enabled (TM1)
[ 0.865811] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.865890] CPU4: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.866784] Booting processor 5 APIC 0x13 ip 0x6000
[ 0.877198] Initializing CPU#5
[ 1.025458] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609622)
[ 1.025465] CPU: Physical Processor ID: 1
[ 1.025466] CPU: Processor Core ID: 1
[ 1.025468] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.025470] CPU: L2 cache: 256K
[ 1.025470] CPU: L3 cache: 8192K
[ 1.025472] CPU 5/0x13 -> Node 0
[ 1.025483] CPU5: Thermal monitoring enabled (TM1)
[ 1.025485] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.025532] CPU5: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.026421] Booting processor 6 APIC 0x15 ip 0x6000
[ 1.036835] Initializing CPU#6
[ 1.185138] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609609)
[ 1.185144] CPU: Physical Processor ID: 1
[ 1.185145] CPU: Processor Core ID: 2
[ 1.185147] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.185149] CPU: L2 cache: 256K
[ 1.185150] CPU: L3 cache: 8192K
[ 1.185151] CPU 6/0x15 -> Node 0
[ 1.185162] CPU6: Thermal monitoring enabled (TM1)
[ 1.185164] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.185248] CPU6: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.186140] Booting processor 7 APIC 0x17 ip 0x6000
[ 1.196554] Initializing CPU#7
[ 1.344817] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609615)
[ 1.344823] CPU: Physical Processor ID: 1
[ 1.344824] CPU: Processor Core ID: 3
[ 1.344827] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.344828] CPU: L2 cache: 256K
[ 1.344829] CPU: L3 cache: 8192K
[ 1.344831] CPU 7/0x17 -> Node 0
[ 1.344841] CPU7: Thermal monitoring enabled (TM1)
[ 1.344843] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.344887] CPU7: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.345721] Brought up 8 CPUs
[ 1.345786] Total of 8 processors activated (36175.94 BogoMIPS).
[ 1.349544] CPU0 attaching sched-domain:
[ 1.349548] domain 0: span 0,4 level SIBLING
[ 1.349549] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 1.349554] domain 1: span 0-7 level MC
[ 1.349555] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.349564] CPU1 attaching sched-domain:
[ 1.349565] domain 0: span 1,5 level SIBLING
[ 1.349567] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 1.349570] domain 1: span 0-7 level MC
[ 1.349572] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.349578] CPU2 attaching sched-domain:
[ 1.349580] domain 0: span 2,6 level SIBLING
[ 1.349581] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 1.349585] domain 1: span 0-7 level MC
[ 1.349587] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.349593] CPU3 attaching sched-domain:
[ 1.349594] domain 0: span 3,7 level SIBLING
[ 1.349596] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 1.349600] domain 1: span 0-7 level MC
[ 1.349601] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.349608] CPU4 attaching sched-domain:
[ 1.349609] domain 0: span 0,4 level SIBLING
[ 1.349611] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 1.349614] domain 1: span 0-7 level MC
[ 1.349616] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.349622] CPU5 attaching sched-domain:
[ 1.349624] domain 0: span 1,5 level SIBLING
[ 1.349625] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 1.349629] domain 1: span 0-7 level MC
[ 1.349630] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.349637] CPU6 attaching sched-domain:
[ 1.349638] domain 0: span 2,6 level SIBLING
[ 1.349640] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 1.349643] domain 1: span 0-7 level MC
[ 1.349645] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.349651] CPU7 attaching sched-domain:
[ 1.349653] domain 0: span 3,7 level SIBLING
[ 1.349654] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 1.349658] domain 1: span 0-7 level MC
[ 1.349660] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.350223] regulator: core version 0.5
[ 1.350312] Time: 21:08:55 Date: 12/01/09
[ 1.350416] NET: Registered protocol family 16
[ 1.350567] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.350653] ACPI: bus type pci registered
[ 1.350777] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.350849] PCI: MCFG area at e0000000 reserved in E820
[ 1.356857] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.356924] PCI: Using configuration type 1 for base access
[ 1.357662] bio: create slab <bio-0> at 0
[ 1.358214] ACPI: EC: Look up EC in DSDT
[ 1.359998] ACPI: BIOS _OSI(Linux) query ignored
[ 1.360165] ACPI: Interpreter enabled
[ 1.360231] ACPI: (supports S0 S4 S5)
[ 1.360436] ACPI: Using IOAPIC for interrupt routing
[ 1.364019] ACPI: No dock devices found.
[ 1.364403] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.364540] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.364610] pci 0000:00:00.0: PME# disabled
[ 1.364733] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.364808] pci 0000:00:01.0: PME# disabled
[ 1.364932] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.365002] pci 0000:00:03.0: PME# disabled
[ 1.365126] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.365196] pci 0000:00:07.0: PME# disabled
[ 1.365448] pci 0000:00:1a.0: reg 20 io port: [0xfc40-0xfc5f]
[ 1.365512] pci 0000:00:1a.1: reg 20 io port: [0xfc60-0xfc7f]
[ 1.365580] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0ff800-0xdf0ffbff]
[ 1.365631] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.365702] pci 0000:00:1a.7: PME# disabled
[ 1.365814] pci 0000:00:1d.0: reg 20 io port: [0xfc80-0xfc9f]
[ 1.365878] pci 0000:00:1d.1: reg 20 io port: [0xfca0-0xfcbf]
[ 1.365941] pci 0000:00:1d.2: reg 20 io port: [0xfcc0-0xfcdf]
[ 1.366005] pci 0000:00:1d.3: reg 20 io port: [0xfce0-0xfcff]
[ 1.366071] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ffc00-0xdf0fffff]
[ 1.366121] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.366192] pci 0000:00:1d.7: PME# disabled
[ 1.366370] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 1.366458] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 1.366530] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 1.366616] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 1.366703] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 1.366835] pci 0000:00:1f.2: reg 10 io port: [0xf8e0-0xf8e7]
[ 1.366840] pci 0000:00:1f.2: reg 14 io port: [0xf8d0-0xf8d3]
[ 1.366845] pci 0000:00:1f.2: reg 18 io port: [0xf8e8-0xf8ef]
[ 1.366850] pci 0000:00:1f.2: reg 1c io port: [0xf8d4-0xf8d7]
[ 1.366855] pci 0000:00:1f.2: reg 20 io port: [0xfc00-0xfc0f]
[ 1.366860] pci 0000:00:1f.2: reg 24 io port: [0xfc10-0xfc1f]
[ 1.366913] pci 0000:00:1f.5: reg 10 io port: [0xf8f0-0xf8f7]
[ 1.366918] pci 0000:00:1f.5: reg 14 io port: [0xf8d8-0xf8db]
[ 1.366923] pci 0000:00:1f.5: reg 18 io port: [0xf8f8-0xf8ff]
[ 1.366928] pci 0000:00:1f.5: reg 1c io port: [0xf8dc-0xf8df]
[ 1.366933] pci 0000:00:1f.5: reg 20 io port: [0xfc20-0xfc2f]
[ 1.366938] pci 0000:00:1f.5: reg 24 io port: [0xfc30-0xfc3f]
[ 1.367006] pci 0000:01:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 1.367055] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.367125] pci 0000:01:00.0: PME# disabled
[ 1.367237] pci 0000:01:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 1.367285] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 1.367356] pci 0000:01:00.1: PME# disabled
[ 1.367455] pci 0000:00:01.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 1.367545] pci 0000:04:03.0: reg 10 32bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.367551] pci 0000:04:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
[ 1.367557] pci 0000:04:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
[ 1.367576] pci 0000:04:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 1.367632] pci 0000:00:1e.0: transparent bridge
[ 1.367702] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
[ 1.367707] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.367724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.368105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 1.368181] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 1.368255] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 1.368336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 1.370468] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 1.371111] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.371751] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.372389] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.373027] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 1.373668] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 1.374306] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.374958] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.376858] vgaarb: device added: PCI:0000:04:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.376944] vgaarb: loaded
[ 1.377077] SCSI subsystem initialized
[ 1.377244] libata version 3.00 loaded.
[ 1.377296] usbcore: registered new interface driver usbfs
[ 1.377373] usbcore: registered new interface driver hub
[ 1.377461] usbcore: registered new device driver usb
[ 1.377613] ACPI: WMI: Mapper loaded
[ 1.377678] PCI: Using ACPI for IRQ routing
[ 1.377860] Bluetooth: Core ver 2.15
[ 1.377946] NET: Registered protocol family 31
[ 1.378013] Bluetooth: HCI device and connection manager initialized
[ 1.378082] Bluetooth: HCI socket layer initialized
[ 1.378149] NetLabel: Initializing
[ 1.378213] NetLabel: domain hash size = 128
[ 1.378278] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.378352] NetLabel: unlabeled traffic allowed by default
[ 1.378446] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.378732] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.444683] Switching to clocksource tsc
[ 1.446136] pnp: PnP ACPI init
[ 1.446209] ACPI: bus type pnp registered
[ 1.449112] pnp: PnP ACPI: found 13 devices
[ 1.449179] ACPI: ACPI bus type pnp unregistered
[ 1.449255] system 00:07: ioport range 0x800-0x87f has been reserved
[ 1.449325] system 00:07: ioport range 0x880-0x8ff could not be reserved
[ 1.449395] system 00:07: ioport range 0x900-0x91f has been reserved
[ 1.449465] system 00:07: ioport range 0x920-0x923 has been reserved
[ 1.449535] system 00:07: ioport range 0x924-0x924 has been reserved
[ 1.449605] system 00:07: ioport range 0xc00-0xc7f has been reserved
[ 1.449674] system 00:07: ioport range 0xca0-0xca7 has been reserved
[ 1.449744] system 00:07: ioport range 0xca9-0xcab has been reserved
[ 1.449814] system 00:07: ioport range 0xcad-0xcaf has been reserved
[ 1.449886] system 00:08: ioport range 0xca8-0xca8 has been reserved
[ 1.449956] system 00:08: ioport range 0xcac-0xcac has been reserved
[ 1.450032] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.450104] system 00:0c: iomem range 0xfed90000-0xfed91fff has been reserved
[ 1.454812] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.454881] pci 0000:00:01.0: IO window: disabled
[ 1.454950] pci 0000:00:01.0: MEM window: 0xda000000-0xddffffff
[ 1.455020] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.455090] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.455158] pci 0000:00:03.0: IO window: disabled
[ 1.455226] pci 0000:00:03.0: MEM window: disabled
[ 1.455295] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.455364] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 1.455432] pci 0000:00:07.0: IO window: disabled
[ 1.455501] pci 0000:00:07.0: MEM window: disabled
[ 1.455569] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.455640] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.455708] pci 0000:00:1e.0: IO window: disabled
[ 1.455778] pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
[ 1.455848] pci 0000:00:1e.0: PREFETCH window: 0x000000d9800000-0x000000d9ffffff
[ 1.455945] alloc irq_desc for 53 on node -1
[ 1.455947] alloc kstat_irqs on node -1
[ 1.455952] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.456024] pci 0000:00:01.0: setting latency timer to 64
[ 1.456030] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.456101] pci 0000:00:03.0: setting latency timer to 64
[ 1.456107] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.456178] pci 0000:00:07.0: setting latency timer to 64
[ 1.456183] pci 0000:00:1e.0: setting latency timer to 64
[ 1.456187] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.456189] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.456191] pci_bus 0000:01: resource 1 mem: [0xda000000-0xddffffff]
[ 1.456193] pci_bus 0000:04: resource 1 mem: [0xde000000-0xdeffffff]
[ 1.456195] pci_bus 0000:04: resource 2 pref mem [0xd9800000-0xd9ffffff]
[ 1.456197] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 1.456198] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.456223] NET: Registered protocol family 2
[ 1.456494] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.457448] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.459033] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.459310] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.459380] TCP reno registered
[ 1.459582] NET: Registered protocol family 1
[ 1.475982] pci 0000:04:03.0: Boot video device
[ 1.476019] Trying to unpack rootfs image as initramfs...
[ 2.610447] Freeing initrd memory: 57939k freed
[ 2.619534] Scanning for low memory corruption every 60 seconds
[ 2.619704] audit: initializing netlink socket (disabled)
[ 2.619780] type=2000 audit(1259701736.510:1): initialized
[ 2.629264] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.630486] VFS: Disk quotas dquot_6.5.2
[ 2.630595] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.631145] fuse init (API version 7.13)
[ 2.631275] msgmni has been set to 15979
[ 2.631556] alg: No test for stdrng (krng)
[ 2.631627] io scheduler noop registered
[ 2.631693] io scheduler anticipatory registered
[ 2.631758] io scheduler deadline registered (default)
[ 2.631858] io scheduler cfq registered
[ 2.632013] alloc irq_desc for 56 on node -1
[ 2.632015] alloc kstat_irqs on node -1
[ 2.632023] pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
[ 2.632029] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.632118] alloc irq_desc for 57 on node -1
[ 2.632120] alloc kstat_irqs on node -1
[ 2.632125] pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
[ 2.632131] pcieport 0000:00:03.0: setting latency timer to 64
[ 2.632219] alloc irq_desc for 58 on node -1
[ 2.632221] alloc kstat_irqs on node -1
[ 2.632226] pcieport 0000:00:07.0: irq 58 for MSI/MSI-X
[ 2.632232] pcieport 0000:00:07.0: setting latency timer to 64
[ 2.632509] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 2.632540] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 2.632572] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 2.632580] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.632664] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.632817] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.632903] ACPI: Power Button [PWRF]
[ 2.633396] Monitor-Mwait will be used to enter C-1 state
[ 2.633414] Monitor-Mwait will be used to enter C-3 state
[ 2.633446] processor LNXCPU:00: registered as cooling_device0
[ 2.633871] processor LNXCPU:01: registered as cooling_device1
[ 2.634285] processor LNXCPU:02: registered as cooling_device2
[ 2.634708] processor LNXCPU:03: registered as cooling_device3
[ 2.635131] processor LNXCPU:04: registered as cooling_device4
[ 2.635545] processor LNXCPU:05: registered as cooling_device5
[ 2.635962] processor LNXCPU:06: registered as cooling_device6
[ 2.636383] processor LNXCPU:07: registered as cooling_device7
[ 2.639061] Linux agpgart interface v0.103
[ 2.639129] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.639289] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.639444] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.639710] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.639890] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.640771] brd: module loaded
[ 2.641184] loop: module loaded
[ 2.641293] input: Macintosh mouse button emulation as /devices/virtual/input/input1
[ 2.641457] ata_piix 0000:00:1f.2: version 2.13
[ 2.641468] alloc irq_desc for 23 on node -1
[ 2.641469] alloc kstat_irqs on node -1
[ 2.641474] ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 2.641546] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.641856] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.641893] scsi0 : ata_piix
[ 2.642006] scsi1 : ata_piix
[ 2.642092] ata1: SATA max UDMA/133 cmd 0xf8e0 ctl 0xf8d0 bmdma 0xfc00 irq 23
[ 2.642166] ata2: SATA max UDMA/133 cmd 0xf8e8 ctl 0xf8d4 bmdma 0xfc08 irq 23
[ 2.642248] alloc irq_desc for 22 on node -1
[ 2.642250] alloc kstat_irqs on node -1
[ 2.642253] ata_piix 0000:00:1f.5: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 2.642327] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.802317] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.802361] scsi2 : ata_piix
[ 2.802464] scsi3 : ata_piix
[ 2.802548] ata3: SATA max UDMA/133 cmd 0xf8f0 ctl 0xf8d8 bmdma 0xfc20 irq 22
[ 2.802620] ata4: SATA max UDMA/133 cmd 0xf8f8 ctl 0xf8dc bmdma 0xfc28 irq 22
[ 2.803218] Fixed MDIO Bus: probed
[ 2.803304] PPP generic driver version 2.4.2
[ 2.803429] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.803511] alloc irq_desc for 19 on node -1
[ 2.803512] alloc kstat_irqs on node -1
[ 2.803516] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.803600] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.803603] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.803701] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.803805] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.807742] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.807752] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0ff800
[ 2.823360] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.823490] usb usb1: configuration #1 chosen from 1 choice
[ 2.823577] hub 1-0:1.0: USB hub found
[ 2.823645] hub 1-0:1.0: 4 ports detected
[ 2.823747] alloc irq_desc for 21 on node -1
[ 2.823749] alloc kstat_irqs on node -1
[ 2.823752] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.823831] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.823833] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.823921] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.824023] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.827964] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.827974] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
[ 2.843324] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.843438] usb usb2: configuration #1 chosen from 1 choice
[ 2.843525] hub 2-0:1.0: USB hub found
[ 2.843592] hub 2-0:1.0: 4 ports detected
[ 2.843692] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.843769] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.843874] alloc irq_desc for 17 on node -1
[ 2.843875] alloc kstat_irqs on node -1
[ 2.843879] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.843953] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.843956] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.844044] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.844154] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000fc40
[ 2.844274] usb usb3: configuration #1 chosen from 1 choice
[ 2.844358] hub 3-0:1.0: USB hub found
[ 2.844425] hub 3-0:1.0: 2 ports detected
[ 2.844521] alloc irq_desc for 18 on node -1
[ 2.844523] alloc kstat_irqs on node -1
[ 2.844527] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.844600] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.844603] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.844689] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.844801] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000fc60
[ 2.844920] usb usb4: configuration #1 chosen from 1 choice
[ 2.845004] hub 4-0:1.0: USB hub found
[ 2.845071] hub 4-0:1.0: 2 ports detected
[ 2.845167] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.845240] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.845243] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.845329] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.845432] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000fc80
[ 2.845552] usb usb5: configuration #1 chosen from 1 choice
[ 2.845636] hub 5-0:1.0: USB hub found
[ 2.845702] hub 5-0:1.0: 2 ports detected
[ 2.845797] alloc irq_desc for 20 on node -1
[ 2.845799] alloc kstat_irqs on node -1
[ 2.845803] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.845876] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.845879] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.845964] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.846075] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000fca0
[ 2.846194] usb usb6: configuration #1 chosen from 1 choice
[ 2.846278] hub 6-0:1.0: USB hub found
[ 2.846344] hub 6-0:1.0: 2 ports detected
[ 2.846439] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.846512] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.846515] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.846608] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.846712] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000fcc0
[ 2.846830] usb usb7: configuration #1 chosen from 1 choice
[ 2.846916] hub 7-0:1.0: USB hub found
[ 2.848102] hub 7-0:1.0: 2 ports detected
[ 2.848198] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 2.848272] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.848274] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.848364] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 2.848467] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000fce0
[ 2.848588] usb usb8: configuration #1 chosen from 1 choice
[ 2.848674] hub 8-0:1.0: USB hub found
[ 2.848741] hub 8-0:1.0: 2 ports detected
[ 2.848871] PNP: No PS/2 controller found. Probing ports directly.
[ 2.851668] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.851743] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.851863] mice: PS/2 mouse device common for all mice
[ 2.851963] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 2.852051] rtc_cmos 00:04: RTC can wake from S4
[ 2.852136] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.852226] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 2.852388] device-mapper: uevent: version 1.0.3
[ 2.852509] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.852705] device-mapper: multipath: version 1.1.0 loaded
[ 2.852778] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.853200] cpuidle: using governor ladder
[ 2.853469] cpuidle: using governor menu
[ 2.853873] TCP cubic registered
[ 2.854034] NET: Registered protocol family 10
[ 2.854564] lo: Disabled Privacy Extensions
[ 2.854864] NET: Registered protocol family 17
[ 2.854940] Bluetooth: L2CAP ver 2.14
[ 2.855004] Bluetooth: L2CAP socket layer initialized
[ 2.855072] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.855137] Bluetooth: SCO socket layer initialized
[ 2.855217] Bluetooth: RFCOMM TTY layer initialized
[ 2.855289] Bluetooth: RFCOMM socket layer initialized
[ 2.855358] Bluetooth: RFCOMM ver 1.11
[ 2.857298] PM: Resume from disk failed.
[ 2.857304] registered taskstats version 1
[ 2.857761] Magic number: 5:404:145
[ 2.857980] rtc_cmos 00:04: setting system clock to 2009-12-01 21:08:57 UTC (1259701737)
[ 2.858074] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.858142] EDD information not available.
[ 2.862979] ata1.00: XXX debounce start, SStatus=123
[ 2.863055] ata2.00: XXX debounce start, SStatus=123
[ 2.982039] ata2.00: XXX debounce done, SStatus=123, DET stable for 120 msecs
[ 2.982126] ata1.00: XXX debounce done, SStatus=123, DET stable for 120 msecs
[ 3.031951] ata4: XXX debounce start, SStatus=4
[ 3.032040] ata3: XXX debounce start, SStatus=113
[ 3.151765] ata3: XXX debounce done, SStatus=113, DET stable for 120 msecs
[ 3.151796] ata4: XXX debounce done, SStatus=4, DET stable for 120 msecs
[ 3.162693] ata4: SATA link down (SStatus 4 SControl 0)
[ 3.201704] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 3.212444] ata2.01: XXX debounce start, SStatus=123
[ 3.212520] ata1.01: XXX debounce start, SStatus=123
[ 3.321469] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.331448] ata2.01: XXX debounce done, SStatus=123, DET stable for 120 msecs
[ 3.331593] ata1.01: XXX debounce done, SStatus=123, DET stable for 120 msecs
[ 3.341614] ata3.00: ATAPI: TEAC DVD-ROM DV28SV, D.0L, max UDMA/100
[ 3.352894] usb 1-3: configuration #1 chosen from 1 choice
[ 3.353129] hub 1-3:1.0: USB hub found
[ 3.353348] hub 1-3:1.0: 4 ports detected
[ 3.381511] ata3.00: configured for UDMA/100
[ 3.491189] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.491274] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.532362] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.532436] ata1.00: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.532746] ata1.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.532822] ata1.01: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.551110] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.551203] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.552368] ata1.00: configured for UDMA/133
[ 3.572092] ata1.01: configured for UDMA/133
[ 3.572322] scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.572488] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.572603] scsi 0:0:1:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.572726] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.572770] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 3.572793] sd 0:0:1:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.572918] sd 0:0:1:0: [sdb] Write Protect is off
[ 3.572920] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.572934] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.573013] sdb: sdb1 sdb2
[ 3.581961] sd 0:0:0:0: [sda] Write Protect is off
[ 3.582032] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.582065] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.582068] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 3.582310] sda: sda1 sda2
[ 3.591268] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.591498] ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.591572] ata2.00: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.591813] ata2.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.591883] ata2.01: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.612520] ata2.00: configured for UDMA/133
[ 3.632681] ata2.01: configured for UDMA/133
[ 3.632864] scsi 1:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.633020] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 3.633064] sd 1:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.633102] sd 1:0:0:0: [sdc] Write Protect is off
[ 3.633104] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.633117] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.633192] sdc:
[ 3.650715] usb 2-3: new high speed USB device using ehci_hcd and address 4
[ 3.811308] usb 2-3: configuration #1 chosen from 1 choice
[ 4.089882] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 4.119132] sdc1
[ 4.119158] scsi 1:0:1:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 4.119236] sd 1:0:1:0: Attached scsi generic sg3 type 0
[ 4.119259] sd 1:0:1:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 4.119285] sd 1:0:1:0: [sdd] Write Protect is off
[ 4.119287] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.119301] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.119625] sdc2
[ 4.119828] sdd:
[ 4.119871] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 4.135001] scsi 2:0:0:0: CD-ROM TEAC DVD-ROM DV28SV D.0L PQ: 0 ANSI: 5
[ 4.147820] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 4.147895] Uniform CD-ROM driver Revision: 3.20
[ 4.148008] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.148036] sr 2:0:0:0: Attached scsi generic sg4 type 5
[ 4.267456] usb 3-1: configuration #1 chosen from 1 choice
[ 4.549016] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 4.586994] sdd1 sdd2
[ 4.587283] sd 1:0:1:0: [sdd] Attached SCSI disk
[ 4.587362] Freeing unused kernel memory: 688k freed
[ 4.587523] Write protecting the kernel read-only data: 7660k
[ 4.715003] md: linear personality registered for level -1
[ 4.720715] usbcore: registered new interface driver hiddev
[ 4.726383] Initializing USB Mass Storage driver...
[ 4.726630] scsi4 : SCSI emulation for USB Mass Storage devices
[ 4.726841] usbcore: registered new interface driver usb-storage
[ 4.726915] USB Mass Storage support registered.
[ 4.727582] usb-storage: device found at 4
[ 4.727583] usb-storage: waiting for device to settle before scanning
[ 4.727686] md: multipath personality registered for level -4
[ 4.727848] usb 5-1: configuration #1 chosen from 1 choice
[ 4.729331] md: raid0 personality registered for level 0
[ 4.731866] md: raid1 personality registered for level 1
[ 4.733265] async_tx: api initialized (async)
[ 4.733948] xor: automatically using best checksumming function: generic_sse
[ 4.735625] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2
[ 4.735760] generic-usb 0003:413C:3200.0001: input,hidraw0: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1a.0-1/input0
[ 4.750875] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input3
[ 4.750998] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 4.751104] usbcore: registered new interface driver usbhid
[ 4.751172] usbhid: v2.6:USB HID core driver
[ 4.779205] generic_sse: 8942.400 MB/sec
[ 4.779273] xor: using function: generic_sse (8942.400 MB/sec)
[ 4.917860] md: bind<sdb1>
[ 4.919213] md: bind<sda2>
[ 4.927159] md: bind<sdd1>
[ 4.928588] md: bind<sdc2>
[ 4.948908] raid6: int64x1 2142 MB/s
[ 5.018141] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 5.118583] raid6: int64x2 2839 MB/s
[ 5.186079] md: bind<sda1>
[ 5.206905] usb 5-2: configuration #1 chosen from 1 choice
[ 5.216953] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input4
[ 5.217091] generic-usb 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 5.222926] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input5
[ 5.223071] generic-usb 0003:0624:0248.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 5.225672] md: bind<sdb2>
[ 5.288332] raid6: int64x4 1903 MB/s
[ 5.458005] raid6: int64x8 1989 MB/s
[ 5.627677] raid6: sse2x1 5939 MB/s
[ 5.797364] raid6: sse2x2 6974 MB/s
[ 5.967039] raid6: sse2x4 7800 MB/s
[ 5.967104] raid6: using algorithm sse2x4 (7800 MB/s)
[ 5.972059] md: raid6 personality registered for level 6
[ 5.972127] md: raid5 personality registered for level 5
[ 5.972194] md: raid4 personality registered for level 4
[ 5.977048] md: raid10 personality registered for level 10
[ 6.027195] raid5: device sdb2 operational as raid disk 1
[ 6.027264] raid5: device sda2 operational as raid disk 0
[ 6.027557] raid5: allocated 3230kB for md1
[ 6.027686] 1: w=1 pa=0 pr=3 m=1 a=2 r=3 op1=0 op2=0
[ 6.027756] 0: w=2 pa=0 pr=3 m=1 a=2 r=3 op1=0 op2=0
[ 6.027827] raid5: raid level 5 set md1 active with 2 out of 3 devices, algorithm 2
[ 6.027912] RAID5 conf printout:
[ 6.027976] --- rd:3 wd:2
[ 6.028039] disk 0, o:1, dev:sda2
[ 6.028103] disk 1, o:1, dev:sdb2
[ 6.028189] md1: detected capacity change from 0 to 3000384356352
[ 6.028416] RAID5 conf printout:
[ 6.028481] --- rd:3 wd:2
[ 6.028544] disk 0, o:1, dev:sda2
[ 6.028611] disk 1, o:1, dev:sdb2
[ 6.028677] disk 2, o:1, dev:sdc2
[ 6.028770] md: recovery of RAID array md1
[ 6.028836] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 6.028906] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 6.029002] md: using 128k window, over a total of 1465031424 blocks.
[ 6.029408] md1:
[ 6.036599] md: bind<sdc1>
[ 6.133505] unknown partition table
[ 6.134328] raid1: raid set md0 active with 4 out of 4 mirrors
[ 6.134417] md0: detected capacity change from 0 to 106823680
[ 6.135179] md0:
[ 6.145344] md: bind<sdd2>
[ 6.160816] unknown partition table
[ 6.637184] PM: Starting manual resume from disk
[ 6.637252] PM: Resume from partition 252:2
[ 6.637253] PM: Checking hibernation image.
[ 6.637443] PM: Error -22 checking image file
[ 6.637446] PM: Resume from disk failed.
[ 6.655656] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 7.728489] Adding 950264k swap on /dev/mapper/raid-morelax_swap. Priority:-1 extents:1 across:950264k
[ 8.272862] EXT4-fs (md0): mounted filesystem with ordered data mode
[ 8.273838] udev: starting version 147
[ 9.719574] usb-storage: device scan complete
[ 9.722681] scsi 4:0:0:0: CD-ROM iDRAC Virtual CD 0323 PQ: 0 ANSI: 0
[ 9.724547] scsi 4:0:0:1: Direct-Access iDRAC Virtual Floppy 0323 PQ: 0 ANSI: 0 CCS
[ 9.837570] sr1: scsi3-mmc drive: 0x/0x cd/rw caddy
[ 9.837665] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 9.837711] sr 4:0:0:0: Attached scsi generic sg5 type 5
[ 9.837783] sd 4:0:0:1: Attached scsi generic sg6 type 0
[ 9.840311] sd 4:0:0:1: [sde] Attached SCSI removable disk
[ 10.113524] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 10.993813] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
[ 10.993828] alloc irq_desc for 36 on node -1
[ 10.993830] alloc kstat_irqs on node -1
[ 10.993837] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 10.993842] bnx2 0000:01:00.0: setting latency timer to 64
[ 10.994025] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 11.168862] lp: driver loaded but no devices found
[ 11.291373] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.388879] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 11.479392] eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 36, node addr 00:26:b9:3c:e0:bc
[ 11.479413] alloc irq_desc for 48 on node -1
[ 11.479415] alloc kstat_irqs on node -1
[ 11.479421] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
[ 11.479427] bnx2 0000:01:00.1: setting latency timer to 64
[ 11.479552] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 11.481929] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 11.484728] eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 48, node addr 00:26:b9:3c:e0:bd
[ 12.539704] alloc irq_desc for 59 on node -1
[ 12.539707] alloc kstat_irqs on node -1
[ 12.539713] bnx2 0000:01:00.0: irq 59 for MSI/MSI-X
[ 12.539715] alloc irq_desc for 60 on node -1
[ 12.539717] alloc kstat_irqs on node -1
[ 12.539721] bnx2 0000:01:00.0: irq 60 for MSI/MSI-X
[ 12.539722] alloc irq_desc for 61 on node -1
[ 12.539724] alloc kstat_irqs on node -1
[ 12.539727] bnx2 0000:01:00.0: irq 61 for MSI/MSI-X
[ 12.539729] alloc irq_desc for 62 on node -1
[ 12.539731] alloc kstat_irqs on node -1
[ 12.539734] bnx2 0000:01:00.0: irq 62 for MSI/MSI-X
[ 12.539736] alloc irq_desc for 63 on node -1
[ 12.539738] alloc kstat_irqs on node -1
[ 12.539741] bnx2 0000:01:00.0: irq 63 for MSI/MSI-X
[ 12.539743] alloc irq_desc for 64 on node -1
[ 12.539744] alloc kstat_irqs on node -1
[ 12.539748] bnx2 0000:01:00.0: irq 64 for MSI/MSI-X
[ 12.539750] alloc irq_desc for 65 on node -1
[ 12.539751] alloc kstat_irqs on node -1
[ 12.539754] bnx2 0000:01:00.0: irq 65 for MSI/MSI-X
[ 12.539756] alloc irq_desc for 66 on node -1
[ 12.539758] alloc kstat_irqs on node -1
[ 12.539761] bnx2 0000:01:00.0: irq 66 for MSI/MSI-X
[ 12.539763] alloc irq_desc for 67 on node -1
[ 12.539765] alloc kstat_irqs on node -1
[ 12.539768] bnx2 0000:01:00.0: irq 67 for MSI/MSI-X
[ 12.596435] bnx2: eth0: using MSIX
[ 12.597339] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.251212] bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex
[ 14.251857] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.493545] eth0: no IPv6 routers present
[-- Attachment #3: badboot.2.6.32-rc8-debug --]
[-- Type: application/octet-stream, Size: 56883 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-rc8 (root@morelax) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #2 SMP Tue Dec 1 16:03:38 EST 2009
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-rc8 root=/dev/mapper/raid-morelax ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] BIOS-e820: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FF00000000 write-back
[ 0.000000] 4 base 0200000000 mask FFE0000000 write-back
[ 0.000000] 5 base 0220000000 mask FFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf699 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable)
[ 0.000000] modified: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] modified: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] modified: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] modified: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf699000
[ 0.000000] 0000000000 - 00cf600000 page 2M
[ 0.000000] 00cf600000 - 00cf699000 page 4k
[ 0.000000] kernel direct mapping tables up to cf699000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000
[ 0.000000] RAMDISK: 3475b000 - 37fefddf
[ 0.000000] ACPI: RSDP 00000000000f1450 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f1554 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000cf6c3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cf6af000 02FEE (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cf6c6000 00040
[ 0.000000] ACPI: APIC 00000000cf6c3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000cf6c35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000cf6c362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DMAR 00000000cf6c3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000cf6c38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000cf6c3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf6c3a3c 00176 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000cf6b2170 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000cf6b23e0 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000cf6b1ff0 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000cf6b2020 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 00000000cf6c3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000cf6c3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 00000000cf6c7000 02104 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 17 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 19 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 21 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 23 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 1 0-d0000000
[ 0.000000] SRAT: Node 0 PXM 1 100000000-230000000
[ 0.000000] NUMA: Using 32 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 000000000005bfff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a03784] TEXT DATA BSS ==> [0001000000 - 0001a03784]
[ 0.000000] #3 [003475b000 - 0037fefddf] RAMDISK ==> [003475b000 - 0037fefddf]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001a04000 - 0001a0432d] BRK ==> [0001a04000 - 0001a0432d]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x000cf699
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2094644
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3831 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 831185 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 32 CPUs, 24 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf699000 - 00000000cf6af000
[ 0.000000] PM: Registered nosave memory: 00000000cf6af000 - 00000000cf6ce000
[ 0.000000] PM: Registered nosave memory: 00000000cf6ce000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88002f800000 s91288 r8192 d23400 u131072
[ 0.000000] pcpu-alloc: s91288 r8192 d23400 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063176
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-rc8 root=/dev/mapper/raid-morelax ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8123496k/9175040k available (5356k kernel code, 796464k absent, 255080k reserved, 3063k data, 688k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1208
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2260.964 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.92 BogoMIPS (lpj=22609640)
[ 0.000156] Security Framework initialized
[ 0.000224] SELinux: Disabled at boot.
[ 0.000811] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002655] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003504] Mount-cache hash table entries: 256
[ 0.003678] Initializing cgroup subsys ns
[ 0.003744] Initializing cgroup subsys cpuacct
[ 0.003813] Initializing cgroup subsys memory
[ 0.003882] Initializing cgroup subsys freezer
[ 0.003949] Initializing cgroup subsys net_cls
[ 0.004028] CPU: Physical Processor ID: 1
[ 0.004093] CPU: Processor Core ID: 0
[ 0.004160] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004271] CPU: L2 cache: 256K
[ 0.004334] CPU: L3 cache: 8192K
[ 0.004399] CPU 0/0x10 -> Node 0
[ 0.004464] mce: CPU supports 9 MCE banks
[ 0.004537] CPU0: Thermal monitoring enabled (TM1)
[ 0.004605] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.004942] using mwait in idle threads.
[ 0.005006] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.005166] ... version: 3
[ 0.005231] ... bit width: 48
[ 0.005296] ... generic registers: 4
[ 0.005361] ... value mask: 0000ffffffffffff
[ 0.005429] ... max period: 000000007fffffff
[ 0.005496] ... fixed-purpose events: 3
[ 0.005561] ... event mask: 000000070000000f
[ 0.007565] ACPI: Core revision 20090903
[ 0.011700] Setting APIC routing to flat
[ 0.012207] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.112084] CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.227148] Booting processor 1 APIC 0x12 ip 0x6000
[ 0.238350] Initializing CPU#1
[ 0.386728] Calibrating delay using timer specific routine.. 4521.91 BogoMIPS (lpj=22609564)
[ 0.386735] CPU: Physical Processor ID: 1
[ 0.386736] CPU: Processor Core ID: 1
[ 0.386738] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.386740] CPU: L2 cache: 256K
[ 0.386741] CPU: L3 cache: 8192K
[ 0.386743] CPU 1/0x12 -> Node 0
[ 0.386753] CPU1: Thermal monitoring enabled (TM1)
[ 0.386756] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.386816] CPU1: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.387640] Skipping synchronization checks as TSC is reliable.
[ 0.387777] Booting processor 2 APIC 0x14 ip 0x6000
[ 0.398767] Initializing CPU#2
[ 0.546408] Calibrating delay using timer specific routine.. 4521.91 BogoMIPS (lpj=22609582)
[ 0.546414] CPU: Physical Processor ID: 1
[ 0.546415] CPU: Processor Core ID: 2
[ 0.546418] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.546419] CPU: L2 cache: 256K
[ 0.546420] CPU: L3 cache: 8192K
[ 0.546422] CPU 2/0x14 -> Node 0
[ 0.546432] CPU2: Thermal monitoring enabled (TM1)
[ 0.546435] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.546499] CPU2: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.547393] Booting processor 3 APIC 0x16 ip 0x6000
[ 0.558451] Initializing CPU#3
[ 0.706087] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609617)
[ 0.706094] CPU: Physical Processor ID: 1
[ 0.706095] CPU: Processor Core ID: 3
[ 0.706097] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.706098] CPU: L2 cache: 256K
[ 0.706099] CPU: L3 cache: 8192K
[ 0.706101] CPU 3/0x16 -> Node 0
[ 0.706111] CPU3: Thermal monitoring enabled (TM1)
[ 0.706114] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.706182] CPU3: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.707075] Booting processor 4 APIC 0x11 ip 0x6000
[ 0.718126] Initializing CPU#4
[ 0.865767] Calibrating delay using timer specific routine.. 4521.91 BogoMIPS (lpj=22609592)
[ 0.865774] CPU: Physical Processor ID: 1
[ 0.865776] CPU: Processor Core ID: 0
[ 0.865778] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.865780] CPU: L2 cache: 256K
[ 0.865781] CPU: L3 cache: 8192K
[ 0.865784] CPU 4/0x11 -> Node 0
[ 0.865795] CPU4: Thermal monitoring enabled (TM1)
[ 0.865798] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.865868] CPU4: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.866771] Booting processor 5 APIC 0x13 ip 0x6000
[ 0.877817] Initializing CPU#5
[ 1.025446] Calibrating delay using timer specific routine.. 4521.91 BogoMIPS (lpj=22609590)
[ 1.025452] CPU: Physical Processor ID: 1
[ 1.025453] CPU: Processor Core ID: 1
[ 1.025455] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.025457] CPU: L2 cache: 256K
[ 1.025458] CPU: L3 cache: 8192K
[ 1.025459] CPU 5/0x13 -> Node 0
[ 1.025470] CPU5: Thermal monitoring enabled (TM1)
[ 1.025473] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.025549] CPU5: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.026440] Booting processor 6 APIC 0x15 ip 0x6000
[ 1.037499] Initializing CPU#6
[ 1.185125] Calibrating delay using timer specific routine.. 4521.91 BogoMIPS (lpj=22609590)
[ 1.185131] CPU: Physical Processor ID: 1
[ 1.185132] CPU: Processor Core ID: 2
[ 1.185134] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.185136] CPU: L2 cache: 256K
[ 1.185137] CPU: L3 cache: 8192K
[ 1.185139] CPU 6/0x15 -> Node 0
[ 1.185149] CPU6: Thermal monitoring enabled (TM1)
[ 1.185151] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.185233] CPU6: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.186136] Booting processor 7 APIC 0x17 ip 0x6000
[ 1.197183] Initializing CPU#7
[ 1.344804] Calibrating delay using timer specific routine.. 4521.91 BogoMIPS (lpj=22609581)
[ 1.344811] CPU: Physical Processor ID: 1
[ 1.344812] CPU: Processor Core ID: 3
[ 1.344814] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.344815] CPU: L2 cache: 256K
[ 1.344816] CPU: L3 cache: 8192K
[ 1.344818] CPU 7/0x17 -> Node 0
[ 1.344828] CPU7: Thermal monitoring enabled (TM1)
[ 1.344831] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.344915] CPU7: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.345751] Brought up 8 CPUs
[ 1.345816] Total of 8 processors activated (36175.35 BogoMIPS).
[ 1.349580] CPU0 attaching sched-domain:
[ 1.349584] domain 0: span 0,4 level SIBLING
[ 1.349585] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 1.349590] domain 1: span 0-7 level MC
[ 1.349591] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.349600] CPU1 attaching sched-domain:
[ 1.349601] domain 0: span 1,5 level SIBLING
[ 1.349603] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 1.349607] domain 1: span 0-7 level MC
[ 1.349608] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.349615] CPU2 attaching sched-domain:
[ 1.349616] domain 0: span 2,6 level SIBLING
[ 1.349618] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 1.349621] domain 1: span 0-7 level MC
[ 1.349623] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.349630] CPU3 attaching sched-domain:
[ 1.349631] domain 0: span 3,7 level SIBLING
[ 1.349633] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 1.349636] domain 1: span 0-7 level MC
[ 1.349638] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.349644] CPU4 attaching sched-domain:
[ 1.349646] domain 0: span 0,4 level SIBLING
[ 1.349647] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 1.349651] domain 1: span 0-7 level MC
[ 1.349653] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.349659] CPU5 attaching sched-domain:
[ 1.349660] domain 0: span 1,5 level SIBLING
[ 1.349662] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 1.349666] domain 1: span 0-7 level MC
[ 1.349667] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.349674] CPU6 attaching sched-domain:
[ 1.349675] domain 0: span 2,6 level SIBLING
[ 1.349677] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 1.349680] domain 1: span 0-7 level MC
[ 1.349682] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.349689] CPU7 attaching sched-domain:
[ 1.349690] domain 0: span 3,7 level SIBLING
[ 1.349691] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 1.349695] domain 1: span 0-7 level MC
[ 1.349697] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.350442] regulator: core version 0.5
[ 1.350531] Time: 21:54:55 Date: 12/01/09
[ 1.350635] NET: Registered protocol family 16
[ 1.350786] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.350872] ACPI: bus type pci registered
[ 1.350996] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.351068] PCI: MCFG area at e0000000 reserved in E820
[ 1.357076] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.357144] PCI: Using configuration type 1 for base access
[ 1.357885] bio: create slab <bio-0> at 0
[ 1.358438] ACPI: EC: Look up EC in DSDT
[ 1.360221] ACPI: BIOS _OSI(Linux) query ignored
[ 1.360387] ACPI: Interpreter enabled
[ 1.360454] ACPI: (supports S0 S4 S5)
[ 1.360659] ACPI: Using IOAPIC for interrupt routing
[ 1.364246] ACPI: No dock devices found.
[ 1.364630] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.364771] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.364843] pci 0000:00:00.0: PME# disabled
[ 1.364967] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.365037] pci 0000:00:01.0: PME# disabled
[ 1.365160] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.365230] pci 0000:00:03.0: PME# disabled
[ 1.365355] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.365425] pci 0000:00:07.0: PME# disabled
[ 1.365678] pci 0000:00:1a.0: reg 20 io port: [0xfc40-0xfc5f]
[ 1.365742] pci 0000:00:1a.1: reg 20 io port: [0xfc60-0xfc7f]
[ 1.365810] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0ff800-0xdf0ffbff]
[ 1.365861] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.366099] pci 0000:00:1a.7: PME# disabled
[ 1.366212] pci 0000:00:1d.0: reg 20 io port: [0xfc80-0xfc9f]
[ 1.366276] pci 0000:00:1d.1: reg 20 io port: [0xfca0-0xfcbf]
[ 1.366339] pci 0000:00:1d.2: reg 20 io port: [0xfcc0-0xfcdf]
[ 1.366403] pci 0000:00:1d.3: reg 20 io port: [0xfce0-0xfcff]
[ 1.366469] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ffc00-0xdf0fffff]
[ 1.366520] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.366592] pci 0000:00:1d.7: PME# disabled
[ 1.366770] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 1.366858] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 1.366930] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 1.367016] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 1.367103] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 1.367235] pci 0000:00:1f.2: reg 10 io port: [0xf8e0-0xf8e7]
[ 1.367240] pci 0000:00:1f.2: reg 14 io port: [0xf8d0-0xf8d3]
[ 1.367245] pci 0000:00:1f.2: reg 18 io port: [0xf8e8-0xf8ef]
[ 1.367250] pci 0000:00:1f.2: reg 1c io port: [0xf8d4-0xf8d7]
[ 1.367255] pci 0000:00:1f.2: reg 20 io port: [0xfc00-0xfc0f]
[ 1.367260] pci 0000:00:1f.2: reg 24 io port: [0xfc10-0xfc1f]
[ 1.367313] pci 0000:00:1f.5: reg 10 io port: [0xf8f0-0xf8f7]
[ 1.367318] pci 0000:00:1f.5: reg 14 io port: [0xf8d8-0xf8db]
[ 1.367323] pci 0000:00:1f.5: reg 18 io port: [0xf8f8-0xf8ff]
[ 1.367328] pci 0000:00:1f.5: reg 1c io port: [0xf8dc-0xf8df]
[ 1.367333] pci 0000:00:1f.5: reg 20 io port: [0xfc20-0xfc2f]
[ 1.367338] pci 0000:00:1f.5: reg 24 io port: [0xfc30-0xfc3f]
[ 1.367407] pci 0000:01:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 1.367455] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.367526] pci 0000:01:00.0: PME# disabled
[ 1.367639] pci 0000:01:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 1.367688] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 1.367758] pci 0000:01:00.1: PME# disabled
[ 1.367857] pci 0000:00:01.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 1.367948] pci 0000:04:03.0: reg 10 32bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.367954] pci 0000:04:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
[ 1.367960] pci 0000:04:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
[ 1.367979] pci 0000:04:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 1.368035] pci 0000:00:1e.0: transparent bridge
[ 1.368105] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
[ 1.368111] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.368127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.368509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 1.368585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 1.368659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 1.368739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 1.370871] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 1.371519] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.372163] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.372806] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.373448] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 1.374090] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 1.374731] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.375384] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.377158] vgaarb: device added: PCI:0000:04:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.377245] vgaarb: loaded
[ 1.377378] SCSI subsystem initialized
[ 1.377546] libata version 3.00 loaded.
[ 1.377597] usbcore: registered new interface driver usbfs
[ 1.377675] usbcore: registered new interface driver hub
[ 1.377762] usbcore: registered new device driver usb
[ 1.377915] ACPI: WMI: Mapper loaded
[ 1.377980] PCI: Using ACPI for IRQ routing
[ 1.378163] Bluetooth: Core ver 2.15
[ 1.378250] NET: Registered protocol family 31
[ 1.378316] Bluetooth: HCI device and connection manager initialized
[ 1.378386] Bluetooth: HCI socket layer initialized
[ 1.378453] NetLabel: Initializing
[ 1.378517] NetLabel: domain hash size = 128
[ 1.378583] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.378658] NetLabel: unlabeled traffic allowed by default
[ 1.378752] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.379039] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.444698] Switching to clocksource tsc
[ 1.446322] pnp: PnP ACPI init
[ 1.446395] ACPI: bus type pnp registered
[ 1.449300] pnp: PnP ACPI: found 13 devices
[ 1.449367] ACPI: ACPI bus type pnp unregistered
[ 1.449442] system 00:07: ioport range 0x800-0x87f has been reserved
[ 1.449512] system 00:07: ioport range 0x880-0x8ff could not be reserved
[ 1.449583] system 00:07: ioport range 0x900-0x91f has been reserved
[ 1.449653] system 00:07: ioport range 0x920-0x923 has been reserved
[ 1.449723] system 00:07: ioport range 0x924-0x924 has been reserved
[ 1.449793] system 00:07: ioport range 0xc00-0xc7f has been reserved
[ 1.449863] system 00:07: ioport range 0xca0-0xca7 has been reserved
[ 1.449933] system 00:07: ioport range 0xca9-0xcab has been reserved
[ 1.450003] system 00:07: ioport range 0xcad-0xcaf has been reserved
[ 1.450075] system 00:08: ioport range 0xca8-0xca8 has been reserved
[ 1.450145] system 00:08: ioport range 0xcac-0xcac has been reserved
[ 1.450221] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.450294] system 00:0c: iomem range 0xfed90000-0xfed91fff has been reserved
[ 1.455002] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.455072] pci 0000:00:01.0: IO window: disabled
[ 1.455142] pci 0000:00:01.0: MEM window: 0xda000000-0xddffffff
[ 1.455213] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.455282] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.455351] pci 0000:00:03.0: IO window: disabled
[ 1.455420] pci 0000:00:03.0: MEM window: disabled
[ 1.455492] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.455561] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 1.455630] pci 0000:00:07.0: IO window: disabled
[ 1.455698] pci 0000:00:07.0: MEM window: disabled
[ 1.455767] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.455837] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.455906] pci 0000:00:1e.0: IO window: disabled
[ 1.455977] pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
[ 1.456048] pci 0000:00:1e.0: PREFETCH window: 0x000000d9800000-0x000000d9ffffff
[ 1.456143] alloc irq_desc for 53 on node -1
[ 1.456145] alloc kstat_irqs on node -1
[ 1.456150] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.456222] pci 0000:00:01.0: setting latency timer to 64
[ 1.456228] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.456300] pci 0000:00:03.0: setting latency timer to 64
[ 1.456305] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.456377] pci 0000:00:07.0: setting latency timer to 64
[ 1.456382] pci 0000:00:1e.0: setting latency timer to 64
[ 1.456385] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.456387] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.456389] pci_bus 0000:01: resource 1 mem: [0xda000000-0xddffffff]
[ 1.456391] pci_bus 0000:04: resource 1 mem: [0xde000000-0xdeffffff]
[ 1.456393] pci_bus 0000:04: resource 2 pref mem [0xd9800000-0xd9ffffff]
[ 1.456395] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 1.456397] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.456421] NET: Registered protocol family 2
[ 1.456692] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.457646] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.459238] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.459513] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.459583] TCP reno registered
[ 1.459784] NET: Registered protocol family 1
[ 1.475995] pci 0000:04:03.0: Boot video device
[ 1.476032] Trying to unpack rootfs image as initramfs...
[ 2.610810] Freeing initrd memory: 57939k freed
[ 2.619900] Scanning for low memory corruption every 60 seconds
[ 2.620073] audit: initializing netlink socket (disabled)
[ 2.620150] type=2000 audit(1259704496.510:1): initialized
[ 2.629639] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.630858] VFS: Disk quotas dquot_6.5.2
[ 2.630967] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.631517] fuse init (API version 7.13)
[ 2.631648] msgmni has been set to 15979
[ 2.631928] alg: No test for stdrng (krng)
[ 2.632001] io scheduler noop registered
[ 2.632066] io scheduler anticipatory registered
[ 2.632139] io scheduler deadline registered (default)
[ 2.632239] io scheduler cfq registered
[ 2.632394] alloc irq_desc for 56 on node -1
[ 2.632396] alloc kstat_irqs on node -1
[ 2.632404] pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
[ 2.632410] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.632499] alloc irq_desc for 57 on node -1
[ 2.632501] alloc kstat_irqs on node -1
[ 2.632506] pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
[ 2.632512] pcieport 0000:00:03.0: setting latency timer to 64
[ 2.632601] alloc irq_desc for 58 on node -1
[ 2.632602] alloc kstat_irqs on node -1
[ 2.632607] pcieport 0000:00:07.0: irq 58 for MSI/MSI-X
[ 2.632613] pcieport 0000:00:07.0: setting latency timer to 64
[ 2.632890] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 2.632921] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 2.632953] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 2.632962] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.633048] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.633201] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.633287] ACPI: Power Button [PWRF]
[ 2.633783] Monitor-Mwait will be used to enter C-1 state
[ 2.633802] Monitor-Mwait will be used to enter C-3 state
[ 2.633834] processor LNXCPU:00: registered as cooling_device0
[ 2.634254] processor LNXCPU:01: registered as cooling_device1
[ 2.634668] processor LNXCPU:02: registered as cooling_device2
[ 2.635092] processor LNXCPU:03: registered as cooling_device3
[ 2.635517] processor LNXCPU:04: registered as cooling_device4
[ 2.635933] processor LNXCPU:05: registered as cooling_device5
[ 2.636354] processor LNXCPU:06: registered as cooling_device6
[ 2.636790] processor LNXCPU:07: registered as cooling_device7
[ 2.639478] Linux agpgart interface v0.103
[ 2.639553] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.639717] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.639879] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.640147] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.640327] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.641212] brd: module loaded
[ 2.641626] loop: module loaded
[ 2.641740] input: Macintosh mouse button emulation as /devices/virtual/input/input1
[ 2.641917] ata_piix 0000:00:1f.2: version 2.13
[ 2.641927] alloc irq_desc for 23 on node -1
[ 2.641929] alloc kstat_irqs on node -1
[ 2.641933] ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 2.642022] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.642346] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.642383] scsi0 : ata_piix
[ 2.642504] scsi1 : ata_piix
[ 2.642595] ata1: SATA max UDMA/133 cmd 0xf8e0 ctl 0xf8d0 bmdma 0xfc00 irq 23
[ 2.642677] ata2: SATA max UDMA/133 cmd 0xf8e8 ctl 0xf8d4 bmdma 0xfc08 irq 23
[ 2.642764] alloc irq_desc for 22 on node -1
[ 2.642765] alloc kstat_irqs on node -1
[ 2.642769] ata_piix 0000:00:1f.5: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 2.642854] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.802173] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.802216] scsi2 : ata_piix
[ 2.802320] scsi3 : ata_piix
[ 2.802405] ata3: SATA max UDMA/133 cmd 0xf8f0 ctl 0xf8d8 bmdma 0xfc20 irq 22
[ 2.802477] ata4: SATA max UDMA/133 cmd 0xf8f8 ctl 0xf8dc bmdma 0xfc28 irq 22
[ 2.803082] Fixed MDIO Bus: probed
[ 2.803169] PPP generic driver version 2.4.2
[ 2.803294] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.803376] alloc irq_desc for 19 on node -1
[ 2.803378] alloc kstat_irqs on node -1
[ 2.803382] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.803465] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.803468] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.803566] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.803672] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.807628] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.807638] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0ff800
[ 2.823212] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.823342] usb usb1: configuration #1 chosen from 1 choice
[ 2.823429] hub 1-0:1.0: USB hub found
[ 2.823497] hub 1-0:1.0: 4 ports detected
[ 2.823601] alloc irq_desc for 21 on node -1
[ 2.823602] alloc kstat_irqs on node -1
[ 2.823606] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.823684] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.823687] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.823775] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.823880] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.827820] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.827830] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
[ 2.843173] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.843287] usb usb2: configuration #1 chosen from 1 choice
[ 2.843374] hub 2-0:1.0: USB hub found
[ 2.843442] hub 2-0:1.0: 4 ports detected
[ 2.843542] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.843620] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.843725] alloc irq_desc for 17 on node -1
[ 2.843726] alloc kstat_irqs on node -1
[ 2.843730] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.843805] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.843807] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.843896] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.844006] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000fc40
[ 2.844126] usb usb3: configuration #1 chosen from 1 choice
[ 2.844211] hub 3-0:1.0: USB hub found
[ 2.844278] hub 3-0:1.0: 2 ports detected
[ 2.844375] alloc irq_desc for 18 on node -1
[ 2.844376] alloc kstat_irqs on node -1
[ 2.844380] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.844454] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.844456] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.844543] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.844655] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000fc60
[ 2.844774] usb usb4: configuration #1 chosen from 1 choice
[ 2.844859] hub 4-0:1.0: USB hub found
[ 2.844926] hub 4-0:1.0: 2 ports detected
[ 2.845022] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.845096] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.845099] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.845184] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.845288] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000fc80
[ 2.845408] usb usb5: configuration #1 chosen from 1 choice
[ 2.845498] hub 5-0:1.0: USB hub found
[ 2.845565] hub 5-0:1.0: 2 ports detected
[ 2.845660] alloc irq_desc for 20 on node -1
[ 2.845661] alloc kstat_irqs on node -1
[ 2.845665] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.845739] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.845742] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.845828] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.845939] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000fca0
[ 2.846058] usb usb6: configuration #1 chosen from 1 choice
[ 2.846142] hub 6-0:1.0: USB hub found
[ 2.846209] hub 6-0:1.0: 2 ports detected
[ 2.846304] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.846378] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.846380] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.846473] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.846577] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000fcc0
[ 2.846695] usb usb7: configuration #1 chosen from 1 choice
[ 2.846787] hub 7-0:1.0: USB hub found
[ 2.848028] hub 7-0:1.0: 2 ports detected
[ 2.848124] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 2.848198] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.848201] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.848290] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 2.848394] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000fce0
[ 2.848515] usb usb8: configuration #1 chosen from 1 choice
[ 2.848601] hub 8-0:1.0: USB hub found
[ 2.848668] hub 8-0:1.0: 2 ports detected
[ 2.848799] PNP: No PS/2 controller found. Probing ports directly.
[ 2.851449] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.851524] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.851645] mice: PS/2 mouse device common for all mice
[ 2.851744] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 2.851833] rtc_cmos 00:04: RTC can wake from S4
[ 2.851918] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.852009] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 2.852171] device-mapper: uevent: version 1.0.3
[ 2.852292] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.852488] device-mapper: multipath: version 1.1.0 loaded
[ 2.852560] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.852986] cpuidle: using governor ladder
[ 2.853254] cpuidle: using governor menu
[ 2.853660] TCP cubic registered
[ 2.853822] NET: Registered protocol family 10
[ 2.854353] lo: Disabled Privacy Extensions
[ 2.854653] NET: Registered protocol family 17
[ 2.854730] Bluetooth: L2CAP ver 2.14
[ 2.854795] Bluetooth: L2CAP socket layer initialized
[ 2.854862] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.854928] Bluetooth: SCO socket layer initialized
[ 2.855008] Bluetooth: RFCOMM TTY layer initialized
[ 2.855076] Bluetooth: RFCOMM socket layer initialized
[ 2.855143] Bluetooth: RFCOMM ver 1.11
[ 2.856931] PM: Resume from disk failed.
[ 2.856937] registered taskstats version 1
[ 2.857398] Magic number: 5:231:954
[ 2.857606] rtc_cmos 00:04: setting system clock to 2009-12-01 21:54:57 UTC (1259704497)
[ 2.857699] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.857767] EDD information not available.
[ 2.872149] ata2.00: XXX debounce start, SStatus=123
[ 2.872153] ata1.00: XXX debounce start, SStatus=123
[ 2.991940] ata1.00: XXX debounce done, SStatus=123, DET stable for 120 msecs
[ 2.991945] ata2.00: XXX debounce done, SStatus=123, DET stable for 120 msecs
[ 3.032604] ata4: XXX debounce start, SStatus=4
[ 3.032678] ata3: XXX debounce start, SStatus=113
[ 3.152366] ata4: XXX debounce done, SStatus=4, DET stable for 120 msecs
[ 3.163203] ata4: SATA link down (SStatus 4 SControl 0)
[ 3.163207] ata3: XXX debounce done, SStatus=113, DET stable for 130 msecs
[ 3.201487] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 3.221458] ata2.01: XXX debounce start, SStatus=123
[ 3.221462] ata1.01: XXX debounce start, SStatus=123
[ 3.321296] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.341462] ata3.00: ATAPI: TEAC DVD-ROM DV28SV, D.0L, max UDMA/100
[ 3.351509] usb 1-3: configuration #1 chosen from 1 choice
[ 3.351759] hub 1-3:1.0: USB hub found
[ 3.351980] hub 1-3:1.0: 4 ports detected
[ 3.381308] ata3.00: configured for UDMA/100
[ 3.441042] ata2.01: XXX debounce done, SStatus=0, DET stable for 120 msecs
[ 3.580765] ata1.01: XXX debounce done, SStatus=123, DET stable for 120 msecs
[ 3.600756] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.600839] ata2.01: SATA link down (SStatus 0 SControl 301)
[ 3.621351] ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.621427] ata2.00: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.641367] ata2.00: configured for UDMA/133
[ 3.650542] usb 2-3: new high speed USB device using ehci_hcd and address 4
[ 3.740469] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.740554] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.781520] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.781596] ata1.00: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.781881] ata1.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 3.781957] ata1.01: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.801510] ata1.00: configured for UDMA/133
[ 3.801864] usb 2-3: configuration #1 chosen from 1 choice
[ 3.821536] ata1.01: configured for UDMA/133
[ 3.821732] scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.821894] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.822008] scsi 0:0:1:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.822132] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.822174] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 3.822284] sd 0:0:1:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.822324] sd 0:0:1:0: [sdb] Write Protect is off
[ 3.822326] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.822340] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.822419] sdb:
[ 3.822541] scsi 1:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 3.822602] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 3.822797] sd 1:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.822822] sd 1:0:0:0: [sdc] Write Protect is off
[ 3.822823] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.822837] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.822906] sdc:
[ 3.838328] scsi 2:0:0:0: CD-ROM TEAC DVD-ROM DV28SV D.0L PQ: 0 ANSI: 5
[ 3.851183] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 3.851258] Uniform CD-ROM driver Revision: 3.20
[ 3.851371] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.851398] sr 2:0:0:0: Attached scsi generic sg3 type 5
[ 4.079605] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 4.256346] usb 3-1: configuration #1 chosen from 1 choice
[ 4.289225] sdb1 sdb2
[ 4.289536] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 4.289623] sd 0:0:0:0: [sda] Write Protect is off
[ 4.289690] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.289704] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.289870] sda: sdc1 sdc2
[ 4.292049] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 4.304613] sda1 sda2
[ 4.304897] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.304975] Freeing unused kernel memory: 688k freed
[ 4.305137] Write protecting the kernel read-only data: 7660k
[ 4.431272] usbcore: registered new interface driver hiddev
[ 4.432092] md: linear personality registered for level -1
[ 4.438531] Initializing USB Mass Storage driver...
[ 4.438720] scsi4 : SCSI emulation for USB Mass Storage devices
[ 4.438870] usb-storage: device found at 4
[ 4.438872] usb-storage: waiting for device to settle before scanning
[ 4.438888] usbcore: registered new interface driver usb-storage
[ 4.438962] USB Mass Storage support registered.
[ 4.440788] md: multipath personality registered for level -4
[ 4.442315] md: raid0 personality registered for level 0
[ 4.444790] md: raid1 personality registered for level 1
[ 4.446083] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2
[ 4.446246] generic-usb 0003:413C:3200.0001: input,hidraw0: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1a.0-1/input0
[ 4.446259] async_tx: api initialized (async)
[ 4.446431] usbcore: registered new interface driver usbhid
[ 4.446502] usbhid: v2.6:USB HID core driver
[ 4.447055] xor: automatically using best checksumming function: generic_sse
[ 4.489717] generic_sse: 8961.200 MB/sec
[ 4.489786] xor: using function: generic_sse (8961.200 MB/sec)
[ 4.548676] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 4.576664] md: bind<sdc1>
[ 4.577279] md: bind<sdc2>
[ 4.659393] raid6: int64x1 2199 MB/s
[ 4.677535] md: bind<sda2>
[ 4.678429] md: bind<sda1>
[ 4.746681] usb 5-1: configuration #1 chosen from 1 choice
[ 4.764738] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input3
[ 4.764878] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 4.829089] raid6: int64x2 2956 MB/s
[ 4.877782] md: bind<sdb2>
[ 4.878548] md: bind<sdb1>
[ 4.998752] raid6: int64x4 1992 MB/s
[ 5.047715] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 5.168380] raid6: int64x8 2085 MB/s
[ 5.238690] usb 5-2: configuration #1 chosen from 1 choice
[ 5.248751] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input4
[ 5.248890] generic-usb 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 5.254733] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input5
[ 5.254890] generic-usb 0003:0624:0248.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 5.338090] raid6: sse2x1 6186 MB/s
[ 5.507724] raid6: sse2x2 7311 MB/s
[ 5.677407] raid6: sse2x4 8204 MB/s
[ 5.677475] raid6: using algorithm sse2x4 (8204 MB/s)
[ 5.682398] md: raid6 personality registered for level 6
[ 5.682466] md: raid5 personality registered for level 5
[ 5.682533] md: raid4 personality registered for level 4
[ 5.683036] raid5: device sdb2 operational as raid disk 1
[ 5.683108] raid5: device sda2 operational as raid disk 0
[ 5.683426] raid5: allocated 3230kB for md1
[ 5.683608] 1: w=1 pa=0 pr=3 m=1 a=2 r=3 op1=0 op2=0
[ 5.683679] 0: w=2 pa=0 pr=3 m=1 a=2 r=3 op1=0 op2=0
[ 5.683746] raid5: raid level 5 set md1 active with 2 out of 3 devices, algorithm 2
[ 5.683830] RAID5 conf printout:
[ 5.683894] --- rd:3 wd:2
[ 5.685135] disk 0, o:1, dev:sda2
[ 5.685201] disk 1, o:1, dev:sdb2
[ 5.685292] md1: detected capacity change from 0 to 3000384356352
[ 5.685434] RAID5 conf printout:
[ 5.685504] --- rd:3 wd:2
[ 5.685567] disk 0, o:1, dev:sda2
[ 5.685632] disk 1, o:1, dev:sdb2
[ 5.685696] disk 2, o:1, dev:sdc2
[ 5.685800] md: recovery of RAID array md1
[ 5.685866] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 5.685935] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 5.686029] md: using 128k window, over a total of 1465031424 blocks.
[ 5.686403] md1:
[ 5.687550] md: raid10 personality registered for level 10
[ 5.695533] unknown partition table
[ 5.945442] PM: Starting manual resume from disk
[ 5.945511] PM: Resume from partition 252:2
[ 5.945512] PM: Checking hibernation image.
[ 5.945702] PM: Error -22 checking image file
[ 5.945705] PM: Resume from disk failed.
[ 5.955497] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 7.165567] Adding 950264k swap on /dev/mapper/raid-morelax_swap. Priority:-1 extents:1 across:950264k
[ 7.706475] udev: starting version 147
[ 8.883159] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 9.193847] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
[ 9.193862] alloc irq_desc for 36 on node -1
[ 9.193864] alloc kstat_irqs on node -1
[ 9.193870] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 9.193876] bnx2 0000:01:00.0: setting latency timer to 64
[ 9.194062] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 9.269927] lp: driver loaded but no devices found
[ 9.420022] usb-storage: device scan complete
[ 9.423257] scsi 4:0:0:0: CD-ROM iDRAC Virtual CD 0323 PQ: 0 ANSI: 0
[ 9.427617] scsi 4:0:0:1: Direct-Access iDRAC Virtual Floppy 0323 PQ: 0 ANSI: 0 CCS
[ 9.535899] sr1: scsi3-mmc drive: 0x/0x cd/rw caddy
[ 9.535989] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 9.536036] sr 4:0:0:0: Attached scsi generic sg4 type 5
[ 9.536109] sd 4:0:0:1: Attached scsi generic sg5 type 0
[ 9.539637] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 9.573628] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 9.587727] eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 36, node addr 00:26:b9:3c:e0:bc
[ 9.587747] alloc irq_desc for 48 on node -1
[ 9.587749] alloc kstat_irqs on node -1
[ 9.587755] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
[ 9.587761] bnx2 0000:01:00.1: setting latency timer to 64
[ 9.587889] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 9.590009] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 9.592558] eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 48, node addr 00:26:b9:3c:e0:bd
[ 9.753302] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.328202] alloc irq_desc for 59 on node -1
[ 10.328204] alloc kstat_irqs on node -1
[ 10.328210] bnx2 0000:01:00.0: irq 59 for MSI/MSI-X
[ 10.328211] alloc irq_desc for 60 on node -1
[ 10.328212] alloc kstat_irqs on node -1
[ 10.328215] bnx2 0000:01:00.0: irq 60 for MSI/MSI-X
[ 10.328216] alloc irq_desc for 61 on node -1
[ 10.328217] alloc kstat_irqs on node -1
[ 10.328220] bnx2 0000:01:00.0: irq 61 for MSI/MSI-X
[ 10.328221] alloc irq_desc for 62 on node -1
[ 10.328222] alloc kstat_irqs on node -1
[ 10.328228] bnx2 0000:01:00.0: irq 62 for MSI/MSI-X
[ 10.328229] alloc irq_desc for 63 on node -1
[ 10.328230] alloc kstat_irqs on node -1
[ 10.328232] bnx2 0000:01:00.0: irq 63 for MSI/MSI-X
[ 10.328234] alloc irq_desc for 64 on node -1
[ 10.328235] alloc kstat_irqs on node -1
[ 10.328237] bnx2 0000:01:00.0: irq 64 for MSI/MSI-X
[ 10.328239] alloc irq_desc for 65 on node -1
[ 10.328240] alloc kstat_irqs on node -1
[ 10.328242] bnx2 0000:01:00.0: irq 65 for MSI/MSI-X
[ 10.328243] alloc irq_desc for 66 on node -1
[ 10.328244] alloc kstat_irqs on node -1
[ 10.328247] bnx2 0000:01:00.0: irq 66 for MSI/MSI-X
[ 10.328248] alloc irq_desc for 67 on node -1
[ 10.328249] alloc kstat_irqs on node -1
[ 10.328252] bnx2 0000:01:00.0: irq 67 for MSI/MSI-X
[ 10.389516] bnx2: eth0: using MSIX
[ 10.390174] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.086154] bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex
[ 12.086826] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.579837] eth0: no IPv6 routers present
next prev parent reply other threads:[~2009-12-01 22:02 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-12 19:43 Intermittent SATA failures ("link offline, clearing class 1 to NONE") Alex Vandiver
2009-12-01 6:04 ` Tejun Heo
2009-12-01 7:37 ` Alex Vandiver
2009-12-01 8:12 ` Tejun Heo
2009-12-01 8:31 ` Tejun Heo
2009-12-01 22:02 ` Alex Vandiver [this message]
2009-12-02 1:43 ` Tejun Heo
2009-12-02 17:45 ` Alex Vandiver
2009-12-03 0:19 ` Tejun Heo
2009-12-03 0:42 ` Tejun Heo
2009-12-18 23:26 ` Alex Vandiver
2009-12-21 4:50 ` Tejun Heo
2009-12-21 19:13 ` Alex Vandiver
2009-12-22 0:06 ` Tejun Heo
[not found] <r2qf7a305db1004270252le438bd88vb3ca3d9b753651a9@mail.gmail.com>
[not found] ` <g2lf7a305db1004270255t5d50de0n1dc21fdc7b191d92@mail.gmail.com>
2010-05-17 9:52 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1259704924-sup-4007@utwig \
--to=alex@chmrr.net \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).