From: Tejun Heo <tj@kernel.org>
To: jeff@garzik.org, linux-ide@vger.kernel.org, sshtylyov@mvista.com
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 13/23] libata-sff: ap->[last_]ctl are SFF specific
Date: Mon, 10 May 2010 21:41:37 +0200 [thread overview]
Message-ID: <1273520507-32459-14-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1273520507-32459-1-git-send-email-tj@kernel.org>
ap->[last_]ctl are specific to SFF controllers. Put them inside
CONFIG_ATA_SFF and move initialization into ata_sff_port_init().
Signed-off-by: Tejun Heo <tj@kernel.org>
---
drivers/ata/libata-core.c | 2 --
drivers/ata/libata-sff.c | 2 ++
include/linux/libata.h | 8 ++++++--
3 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 200f49d..bf6ffc1 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5634,10 +5634,8 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
ap->pflags |= ATA_PFLAG_INITIALIZING;
ap->lock = &host->lock;
ap->print_id = -1;
- ap->ctl = ATA_DEVCTL_OBS;
ap->host = host;
ap->dev = host->dev;
- ap->last_ctl = 0xFF;
#if defined(ATA_VERBOSE_DEBUG)
/* turn on all debugging levels */
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 9effce9..0d55440 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -3054,6 +3054,8 @@ EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
*/
void ata_sff_port_init(struct ata_port *ap)
{
+ ap->ctl = ATA_DEVCTL_OBS;
+ ap->last_ctl = 0xFF;
}
int __init ata_sff_init(void)
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3c451ab..88c4cc9 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -721,10 +721,10 @@ struct ata_port {
#ifdef CONFIG_ATA_SFF
struct ata_ioports ioaddr; /* ATA cmd/ctl/dma register blocks */
-#endif /* CONFIG_ATA_SFF */
-
u8 ctl; /* cache of ATA control register */
u8 last_ctl; /* Cache last written value */
+#endif /* CONFIG_ATA_SFF */
+
unsigned int pio_mask;
unsigned int mwdma_mask;
unsigned int udma_mask;
@@ -1434,7 +1434,11 @@ static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf)
{
memset(tf, 0, sizeof(*tf));
+#ifdef CONFIG_ATA_SFF
tf->ctl = dev->link->ap->ctl;
+#else
+ tf->ctl = ATA_DEVCTL_OBS;
+#endif
if (dev->devno == 0)
tf->device = ATA_DEVICE_OBS;
else
--
1.6.4.2
next prev parent reply other threads:[~2010-05-10 19:42 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-10 19:41 [PATCHSET #upstream] libata: separate out SFF and BMDMA, take#2 Tejun Heo
2010-05-10 19:41 ` [PATCH 01/23] pata_sch: use ata_pci_sff_init_one() Tejun Heo
2010-05-15 2:39 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 02/23] sata_inic162x: inic162x is not dependent on CONFIG_ATA_SFF Tejun Heo
2010-05-10 19:41 ` [PATCH 03/23] sata_mv: remove unnecessary initialization Tejun Heo
2010-05-10 19:41 ` [PATCH 04/23] libata-sff: update bmdma host bus error handling Tejun Heo
2010-05-10 19:41 ` [PATCH 05/23] libata-sff: kill unused prototype and make ata_dev_select() static Tejun Heo
2010-05-10 19:41 ` [PATCH 06/23] libata: kill ATA_FLAG_DISABLED Tejun Heo
2010-05-18 2:49 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 07/23] sata_inic162x: kill PORT_PRD_ADDR initialization Tejun Heo
2010-05-10 19:41 ` [PATCH 08/23] libata-sff: reorder SFF/BMDMA functions Tejun Heo
2010-05-10 19:41 ` [PATCH 09/23] libata-sff: clean up inheritance in several drivers Tejun Heo
2010-05-18 2:52 ` Jeff Garzik
2010-05-18 8:36 ` Tejun Heo
2010-05-19 17:07 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 10/23] libata-sff: clean up BMDMA initialization Tejun Heo
2010-05-18 2:56 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 11/23] libata-sff: introduce ata_sff_init/exit() and ata_sff_port_init() Tejun Heo
2010-05-18 3:00 ` Jeff Garzik
2010-05-19 17:37 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 12/23] libata-sff: rename ap->ops->drain_fifo() to sff_drain_fifo() Tejun Heo
2010-05-18 3:04 ` Jeff Garzik
2010-05-18 8:40 ` Tejun Heo
2010-05-10 19:41 ` Tejun Heo [this message]
2010-05-10 19:41 ` [PATCH 14/23] libata-sff: port_task is SFF specific Tejun Heo
2010-05-10 19:41 ` [PATCH 15/23] libata-sff: separate out BMDMA EH Tejun Heo
2010-05-10 19:41 ` [PATCH 16/23] libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific Tejun Heo
2010-05-18 3:05 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 17/23] libata-sff: prd is " Tejun Heo
2010-05-18 3:06 ` Jeff Garzik
2010-05-18 8:38 ` Tejun Heo
2010-05-19 17:39 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 18/23] libata-sff: separate out BMDMA qc_issue Tejun Heo
2010-05-10 19:41 ` [PATCH 19/23] libata-sff: ata_sff_irq_clear() is BMDMA specific Tejun Heo
2010-05-19 17:40 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 20/23] libata-sff: separate out BMDMA irq handler Tejun Heo
2010-05-10 19:41 ` [PATCH 21/23] libata-sff: separate out BMDMA init Tejun Heo
2010-05-10 19:41 ` [PATCH 22/23] libata-sff: kill dummy BMDMA ops from sata_qstor and pata_octeon_cf Tejun Heo
2010-05-10 19:41 ` [PATCH 23/23] libata-sff: make BMDMA optional Tejun Heo
2010-05-18 3:10 ` Jeff Garzik
2010-05-10 20:22 ` [PATCHSET #upstream] libata: separate out SFF and BMDMA, take#2 Jeff Garzik
2010-05-10 20:38 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1273520507-32459-14-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=sshtylyov@mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).