From: Tejun Heo <tj@kernel.org>
To: jeff@garzik.org, linux-ide@vger.kernel.org, sshtylyov@mvista.com
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 02/23] sata_inic162x: inic162x is not dependent on CONFIG_ATA_SFF
Date: Mon, 10 May 2010 21:41:26 +0200 [thread overview]
Message-ID: <1273520507-32459-3-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1273520507-32459-1-git-send-email-tj@kernel.org>
sata_inic162x no longer uses SFF interface. Move it out of
CONFIG_ATA_SFF.
Signed-off-by: Tejun Heo <tj@kernel.org>
---
drivers/ata/Kconfig | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index cbadb9f..e68541f 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -81,6 +81,12 @@ config SATA_SIL24
If unsure, say N.
+config SATA_INIC162X
+ tristate "Initio 162x SATA support"
+ depends on PCI
+ help
+ This option enables support for Initio 162x Serial ATA.
+
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
@@ -221,12 +227,6 @@ config SATA_VITESSE
If unsure, say N.
-config SATA_INIC162X
- tristate "Initio 162x SATA support"
- depends on PCI
- help
- This option enables support for Initio 162x Serial ATA.
-
config PATA_ACPI
tristate "ACPI firmware driver for PATA"
depends on ATA_ACPI
--
1.6.4.2
next prev parent reply other threads:[~2010-05-10 19:42 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-10 19:41 [PATCHSET #upstream] libata: separate out SFF and BMDMA, take#2 Tejun Heo
2010-05-10 19:41 ` [PATCH 01/23] pata_sch: use ata_pci_sff_init_one() Tejun Heo
2010-05-15 2:39 ` Jeff Garzik
2010-05-10 19:41 ` Tejun Heo [this message]
2010-05-10 19:41 ` [PATCH 03/23] sata_mv: remove unnecessary initialization Tejun Heo
2010-05-10 19:41 ` [PATCH 04/23] libata-sff: update bmdma host bus error handling Tejun Heo
2010-05-10 19:41 ` [PATCH 05/23] libata-sff: kill unused prototype and make ata_dev_select() static Tejun Heo
2010-05-10 19:41 ` [PATCH 06/23] libata: kill ATA_FLAG_DISABLED Tejun Heo
2010-05-18 2:49 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 07/23] sata_inic162x: kill PORT_PRD_ADDR initialization Tejun Heo
2010-05-10 19:41 ` [PATCH 08/23] libata-sff: reorder SFF/BMDMA functions Tejun Heo
2010-05-10 19:41 ` [PATCH 09/23] libata-sff: clean up inheritance in several drivers Tejun Heo
2010-05-18 2:52 ` Jeff Garzik
2010-05-18 8:36 ` Tejun Heo
2010-05-19 17:07 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 10/23] libata-sff: clean up BMDMA initialization Tejun Heo
2010-05-18 2:56 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 11/23] libata-sff: introduce ata_sff_init/exit() and ata_sff_port_init() Tejun Heo
2010-05-18 3:00 ` Jeff Garzik
2010-05-19 17:37 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 12/23] libata-sff: rename ap->ops->drain_fifo() to sff_drain_fifo() Tejun Heo
2010-05-18 3:04 ` Jeff Garzik
2010-05-18 8:40 ` Tejun Heo
2010-05-10 19:41 ` [PATCH 13/23] libata-sff: ap->[last_]ctl are SFF specific Tejun Heo
2010-05-10 19:41 ` [PATCH 14/23] libata-sff: port_task is " Tejun Heo
2010-05-10 19:41 ` [PATCH 15/23] libata-sff: separate out BMDMA EH Tejun Heo
2010-05-10 19:41 ` [PATCH 16/23] libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific Tejun Heo
2010-05-18 3:05 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 17/23] libata-sff: prd is " Tejun Heo
2010-05-18 3:06 ` Jeff Garzik
2010-05-18 8:38 ` Tejun Heo
2010-05-19 17:39 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 18/23] libata-sff: separate out BMDMA qc_issue Tejun Heo
2010-05-10 19:41 ` [PATCH 19/23] libata-sff: ata_sff_irq_clear() is BMDMA specific Tejun Heo
2010-05-19 17:40 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 20/23] libata-sff: separate out BMDMA irq handler Tejun Heo
2010-05-10 19:41 ` [PATCH 21/23] libata-sff: separate out BMDMA init Tejun Heo
2010-05-10 19:41 ` [PATCH 22/23] libata-sff: kill dummy BMDMA ops from sata_qstor and pata_octeon_cf Tejun Heo
2010-05-10 19:41 ` [PATCH 23/23] libata-sff: make BMDMA optional Tejun Heo
2010-05-18 3:10 ` Jeff Garzik
2010-05-10 20:22 ` [PATCHSET #upstream] libata: separate out SFF and BMDMA, take#2 Jeff Garzik
2010-05-10 20:38 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1273520507-32459-3-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=sshtylyov@mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).