From: Tobias Karnat <tobias.karnat@googlemail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: sata_sil24: external raid storage mistaken as port multiplier
Date: Mon, 22 Nov 2010 22:24:33 +0100 [thread overview]
Message-ID: <1290461073.12443.21.camel@Tobias-Karnat> (raw)
Hi,
I have a regression regarding the sata_sil24 driver:
My RaidSonic Stardom SR3620-2S-SB2 is mistaken as a port multiplier,
it did work with Linux 2.6.23.
Maybe an module option to disable port multiplier support would already help.
-Tobias
Linux Tobias-Karnat 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16 20:45:36 UTC 2010 x86_64 GNU/Linux
02:00.0 RAID bus controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
Subsystem: Silicon Image, Inc. Device 7132
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fadfbf80 (64-bit, non-prefetchable) [size=128]
Region 2: Memory at fadfc000 (64-bit, non-prefetchable) [size=16K]
Region 4: I/O ports at cc80 [size=128]
Expansion ROM at fae00000 [disabled] [size=512K]
Capabilities: [54] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel driver in use: sata_sil24
Kernel modules: sata_sil24
[ 2044.110031] ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen
[ 2044.110036] ata3: irq_stat 0x00b40090, PHY RDY changed
[ 2044.110044] ata3: hard resetting link
[ 2046.330028] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 2047.110026] ata3.15: Port Multiplier 1.1, 0x1095:0x4723 r28, 3 ports, feat 0x1/0x9
[ 2047.510027] ata3.00: hard resetting link
[ 2050.320020] ata3.00: failed to resume link (SControl 0)
[ 2050.540038] ata3.00: softreset failed (SRST command error)
[ 2050.720037] ata3.00: failed to read SCR 0 (Emask=0x1)
[ 2050.720040] ata3.00: reset failed, giving up
[ 2050.720046] ata3.15: hard resetting link
[ 2050.720048] ata3: controller in dubious state, performing PORT_RST
[ 2052.980030] ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 2053.720024] ata3.00: hard resetting link
[ 2056.520040] ata3.00: failed to resume link (SControl 0)
[ 2057.420721] ata3.00: SATA link down (SStatus 0 SControl 0)
[ 2057.620025] ata3.01: hard resetting link
[ 2060.440045] ata3.01: failed to resume link (SControl 0)
[ 2067.620038] ata3.01: softreset failed (timeout)
[ 2067.650049] ata3.01: hard resetting link
[ 2070.450048] ata3.01: failed to resume link (SControl 0)
[ 2077.660099] ata3.01: softreset failed (timeout)
[ 2077.760064] ata3.01: hard resetting link
[ 2080.561452] ata3.01: failed to resume link (SControl 0)
[ 2112.750663] ata3.01: softreset failed (timeout)
[ 2112.890033] ata3.01: limiting SATA link speed to 1.5 Gbps
[ 2112.890038] ata3.01: hard resetting link
[ 2115.690110] ata3.01: failed to resume link (SControl 0)
[ 2117.900038] ata3.01: softreset failed (timeout)
[ 2117.990048] ata3.01: reset failed, giving up
[ 2117.990055] ata3.15: hard resetting link
[ 2120.220030] ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 2121.000053] ata3.01: hard resetting link
[ 2123.800040] ata3.01: failed to resume link (SControl 0)
[ 2131.000059] ata3.01: softreset failed (timeout)
[ 2131.100045] ata3.01: hard resetting link
[ 2133.900047] ata3.01: failed to resume link (SControl 0)
[ 2141.100154] ata3.01: softreset failed (timeout)
[ 2141.200046] ata3.01: hard resetting link
[ 2144.010034] ata3.01: failed to resume link (SControl 0)
[ 2176.200663] ata3.01: softreset failed (timeout)
[ 2176.200670] ata3.01: failed to read SCR 0 (Emask=0x40)
[ 2176.200674] ata3.01: reset failed, giving up
[ 2176.200680] ata3.15: hard resetting link
[ 2178.290030] ata3.15: SATA link down (SStatus 0 SControl 0)
[ 2181.294766] ata3.15: qc timeout (cmd 0xe4)
[ 2181.294795] ata3.15: failed to read PMP GSCR[0] (Emask=0x5)
[ 2181.294799] ata3.15: PMP revalidation failed (errno=-5)
[ 2183.290042] ata3.15: hard resetting link
[ 2185.382136] ata3.15: SATA link down (SStatus 0 SControl 0)
[ 2188.382646] ata3.15: qc timeout (cmd 0xe4)
[ 2188.382675] ata3.15: failed to read PMP GSCR[0] (Emask=0x5)
[ 2188.382680] ata3.15: PMP revalidation failed (errno=-5)
[ 2188.382685] ata3.15: limiting SATA link speed to 1.5 Gbps
[ 2190.390642] ata3.15: hard resetting link
[ 2192.480655] ata3.15: SATA link down (SStatus 0 SControl 10)
[ 2195.480021] ata3.15: qc timeout (cmd 0xe4)
[ 2195.480050] ata3.15: failed to read PMP GSCR[0] (Emask=0x5)
[ 2195.480054] ata3.15: PMP revalidation failed (errno=-5)
[ 2197.480016] ata3.15: hard resetting link
[ 2199.570662] ata3.15: SATA link down (SStatus 0 SControl 10)
[ 2202.570646] ata3.15: qc timeout (cmd 0xe4)
[ 2202.570675] ata3.15: failed to read PMP GSCR[0] (Emask=0x5)
[ 2202.570680] ata3.15: PMP revalidation failed (errno=-5)
[ 2204.570638] ata3.15: hard resetting link
[ 2206.670025] ata3.15: SATA link down (SStatus 0 SControl 10)
[ 2209.670020] ata3.15: qc timeout (cmd 0xe4)
[ 2209.670049] ata3.15: failed to read PMP GSCR[0] (Emask=0x5)
[ 2209.670053] ata3.15: PMP revalidation failed (errno=-5)
[ 2209.670056] ata3.15: failed to recover PMP after 5 tries, giving up
[ 2209.670059] ata3.15: Port Multiplier detaching
[ 2209.670088] ata3.00: disabled
[ 2209.670104] ata3: hard resetting link
[ 2211.760652] ata3: SATA link down (SStatus 0 SControl 10)
[ 2211.760664] ata3: EH complete
next reply other threads:[~2010-11-22 21:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-22 21:24 Tobias Karnat [this message]
2010-11-23 12:08 ` sata_sil24: external raid storage mistaken as port multiplier Tobias Karnat
2010-11-24 4:23 ` Tobias Karnat
2010-11-26 17:19 ` Tejun Heo
2010-11-26 20:13 ` Mark Lord
2010-11-26 20:16 ` Tejun Heo
2010-11-27 2:57 ` Mark Lord
2010-11-28 10:51 ` Tobias Karnat
2010-12-03 12:45 ` Tobias Karnat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1290461073.12443.21.camel@Tobias-Karnat \
--to=tobias.karnat@googlemail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox