From mboxrd@z Thu Jan 1 00:00:00 1970 From: James Bottomley Subject: Re: [PATCH 0/2][concept RFC] x86: BIOS-save kernel log to disk upon panic Date: Tue, 25 Jan 2011 11:02:35 -0500 Message-ID: <1295971355.4955.104.camel@mulgrave.site> References: <20110125134748.GA10051@laptop> <20110125140948.GA26762@elte.hu> <20110125153649.GA11386@laptop> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: Received: from cantor2.suse.de ([195.135.220.15]:55127 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750702Ab1AYQCn (ORCPT ); Tue, 25 Jan 2011 11:02:43 -0500 In-Reply-To: <20110125153649.GA11386@laptop> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: "Ahmed S. Darwish" Cc: Ingo Molnar , "H. Peter Anvin" , Thomas Gleixner , Ingo Molnar , X86-ML , Tony Luck , Dave Jones , Andrew Morton , Randy Dunlap , Willy Tarreau , Willy Tarreau , Dirk Hohndel , Dirk.Hohndel@intel.com, IDE-ML , LKML , Linus Torvalds , Peter Zijlstra , =?ISO-8859-1?Q?Fr=E9d=E9ric?= Weisbecker , Borislav Petkov , Arjan van de Ven On Tue, 2011-01-25 at 17:36 +0200, Ahmed S. Darwish wrote: > The complete __roadblock__ I'm currently facing though is restoring the disk > controllers to the state originally setup by the BIOS Power-on self-test (POST). > I hope such re-initialization is even technically feasible. > > Without such re-initialization, we'll just be risking the BIOS code exploding. > That was the case in the 5-minute hang described in the cover sheet (PATCH #0). So this is the bit that's not really technically feasible. BIOS tends to run storage devices in a very primitive way (so it takes basic settings, for example and sets the device up for one particular channel of access). When preparing the device for an operating system, we have to blow away all the bios stuff and put it into a more generally performant mode (this isn't just the storage per se, it's also the interrupt and routing). Unfortunately, currently, we don't bother to save the settings the BIOS was using, so there's no way to reinitialise the device back to bios without an effective reboot. Most BIOS doesn't seem to contain storage re-POST code that's usable (it's all embedded in the boot sequence). James