From: Dan McGee <dpmcgee@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Jeff Garzik <jgarzik@pobox.com>,
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH 4/5] pata_sis: mark most const data static as well
Date: Wed, 7 Sep 2011 11:23:21 -0500 [thread overview]
Message-ID: <1315412602-6560-5-git-send-email-dpmcgee@gmail.com> (raw)
In-Reply-To: <1315412602-6560-1-git-send-email-dpmcgee@gmail.com>
This pushes timing and other values into preinitialized read-only data
sections rather than being inlined into the code. None of these
functions are called more than a handful of times, so reducing code size
makes sense.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
---
drivers/ata/pata_sis.c | 20 ++++++++++----------
1 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index a42668b..d886b0b 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -231,8 +231,8 @@ static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
u8 t1, t2;
int speed = adev->pio_mode - XFER_PIO_0;
- const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 };
- const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 };
+ static const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 };
+ static const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 };
sis_set_fifo(ap, adev);
@@ -267,7 +267,7 @@ static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
int port = sis_old_port_base(adev);
int speed = adev->pio_mode - XFER_PIO_0;
- const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
+ static const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
sis_set_fifo(ap, adev);
@@ -293,14 +293,14 @@ static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
u32 t1;
int speed = adev->pio_mode - XFER_PIO_0;
- const u32 timing133[] = {
+ static const u32 timing133[] = {
0x28269000, /* Recovery << 24 | Act << 16 | Ini << 12 */
0x0C266000,
0x04263000,
0x0C0A3000,
0x05093000
};
- const u32 timing100[] = {
+ static const u32 timing100[] = {
0x1E1C6000, /* Recovery << 24 | Act << 16 | Ini << 12 */
0x091C4000,
0x031C2000,
@@ -341,8 +341,8 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
int drive_pci = sis_old_port_base(adev);
u16 timing;
- const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
- const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 };
+ static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
+ static const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 };
pci_read_config_word(pdev, drive_pci, &timing);
@@ -381,8 +381,8 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
u16 timing;
/* MWDMA 0-2 and UDMA 0-5 */
- const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
- const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };
+ static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
+ static const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };
pci_read_config_word(pdev, drive_pci, &timing);
@@ -419,7 +419,7 @@ static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
int drive_pci = sis_old_port_base(adev);
u8 timing;
- const u8 udma_bits[] = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81};
+ static const u8 udma_bits[] = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81};
pci_read_config_byte(pdev, drive_pci + 1, &timing);
--
1.7.6.1
next prev parent reply other threads:[~2011-09-07 16:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-07 16:23 [PATCH 0/5 v2] pata_sis fixes and driver cleanup Dan McGee
2011-09-07 16:23 ` [PATCH 1/5] pata_sis: extract a sis_port_base() method Dan McGee
2011-09-07 16:23 ` [PATCH 2/5] pata_sis: add mode_filter method for certain sis5513 chipsets Dan McGee
2011-09-07 16:23 ` [PATCH 3/5] pata_sis: enable MWDMA for UDMA 133 chipset Dan McGee
2011-09-07 16:23 ` Dan McGee [this message]
2011-09-07 16:23 ` [PATCH 5/5] pata_sis: code style cleanups for consistency Dan McGee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1315412602-6560-5-git-send-email-dpmcgee@gmail.com \
--to=dpmcgee@gmail.com \
--cc=bzolnier@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).