From: Lin Ming <ming.m.lin@intel.com>
To: Zhang Rui <rui.zhang@intel.com>, Jeff Garzik <jgarzik@pobox.com>,
Alan Stern <stern@rowland.harvard.edu>, Tejun Heo <tj@kernel.org>,
"Rafael J. Wysocki" <rjw@sisk.pl>, Len Brown <lenb@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
linux-scsi@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [RFC PATCH 5/6] PCI: Move acpi_dev_run_wake to acpi core
Date: Mon, 13 Feb 2012 17:11:10 +0800 [thread overview]
Message-ID: <1329124271-29464-6-git-send-email-ming.m.lin@intel.com> (raw)
In-Reply-To: <1329124271-29464-1-git-send-email-ming.m.lin@intel.com>
acpi_dev_run_wake is a generic function which can be used by
other subsystem too. Rename it to acpi_pm_device_run_wake, to be
consistent with acpi_pm_device_sleep_wake.
Then move it to acpi core.
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
---
drivers/acpi/sleep.c | 35 +++++++++++++++++++++++++++++++++++
drivers/pci/pci-acpi.c | 40 +++-------------------------------------
include/acpi/acpi_bus.h | 5 +++++
3 files changed, 43 insertions(+), 37 deletions(-)
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index ca191ff..00fa664 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -17,6 +17,7 @@
#include <linux/suspend.h>
#include <linux/reboot.h>
#include <linux/acpi.h>
+#include <linux/pm_runtime.h>
#include <asm/io.h>
@@ -730,6 +731,40 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
#ifdef CONFIG_PM_SLEEP
/**
+ * acpi_pm_device_run_wake - Enable/disable wake-up for given device.
+ * @phys_dev: Device to enable/disable the platform to wake-up the system for.
+ * @enable: Whether enable or disable the wake-up functionality.
+ *
+ * Find the ACPI device object corresponding to @pci_dev and try to
+ * enable/disable the GPE associated with it.
+ */
+int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
+{
+ struct acpi_device *dev;
+ acpi_handle handle;
+
+ if (!device_run_wake(phys_dev))
+ return -EINVAL;
+
+ handle = DEVICE_ACPI_HANDLE(phys_dev);
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) {
+ dev_dbg(phys_dev, "ACPI handle has no context in %s!\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ if (enable) {
+ acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
+ acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
+ } else {
+ acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
+ acpi_disable_wakeup_device_power(dev);
+ }
+
+ return 0;
+}
+
+/**
* acpi_pm_device_sleep_wake - enable or disable the system wake-up
* capability of given device
* @dev: device to handle
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 060fd22..0f150f2 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -277,40 +277,6 @@ static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable)
return 0;
}
-/**
- * acpi_dev_run_wake - Enable/disable wake-up for given device.
- * @phys_dev: Device to enable/disable the platform to wake-up the system for.
- * @enable: Whether enable or disable the wake-up functionality.
- *
- * Find the ACPI device object corresponding to @pci_dev and try to
- * enable/disable the GPE associated with it.
- */
-static int acpi_dev_run_wake(struct device *phys_dev, bool enable)
-{
- struct acpi_device *dev;
- acpi_handle handle;
-
- if (!device_run_wake(phys_dev))
- return -EINVAL;
-
- handle = DEVICE_ACPI_HANDLE(phys_dev);
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) {
- dev_dbg(phys_dev, "ACPI handle has no context in %s!\n",
- __func__);
- return -ENODEV;
- }
-
- if (enable) {
- acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
- acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
- } else {
- acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
- acpi_disable_wakeup_device_power(dev);
- }
-
- return 0;
-}
-
static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)
{
while (bus->parent) {
@@ -318,14 +284,14 @@ static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)
if (bridge->pme_interrupt)
return;
- if (!acpi_dev_run_wake(&bridge->dev, enable))
+ if (!acpi_pm_device_run_wake(&bridge->dev, enable))
return;
bus = bus->parent;
}
/* We have reached the root bus. */
if (bus->bridge)
- acpi_dev_run_wake(bus->bridge, enable);
+ acpi_pm_device_run_wake(bus->bridge, enable);
}
static int acpi_pci_run_wake(struct pci_dev *dev, bool enable)
@@ -333,7 +299,7 @@ static int acpi_pci_run_wake(struct pci_dev *dev, bool enable)
if (dev->pme_interrupt)
return 0;
- if (!acpi_dev_run_wake(&dev->dev, enable))
+ if (!acpi_pm_device_run_wake(&dev->dev, enable))
return 0;
acpi_pci_propagate_run_wake(dev->bus, enable);
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 32fb899..2d556e3 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -394,8 +394,13 @@ static inline int acpi_pm_device_sleep_state(struct device *d, int *p)
#endif
#ifdef CONFIG_PM_SLEEP
+int acpi_pm_device_run_wake(struct device *, bool);
int acpi_pm_device_sleep_wake(struct device *, bool);
#else
+static inline int acpi_pm_device_run_wake(struct device *dev, bool enable)
+{
+ return -ENODEV;
+}
static inline int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
{
return -ENODEV;
--
1.7.2.5
next prev parent reply other threads:[~2012-02-13 9:11 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-13 9:11 [RFC] ACPI D3Cold state and SATA ZPODD support Lin Ming
2012-02-13 9:11 ` [RFC PATCH 1/6] ACPI: Introduce ACPI D3_COLD state support Lin Ming
2012-02-13 20:25 ` Rafael J. Wysocki
2012-02-14 7:07 ` Zhang Rui
2012-02-14 22:29 ` Rafael J. Wysocki
2012-02-16 7:08 ` Zhang Rui
2012-02-17 22:23 ` Rafael J. Wysocki
2012-02-20 5:39 ` Zhang Rui
2012-02-13 9:11 ` [RFC PATCH 2/6] ACPI: Reference devices in ACPI Power Resource Lin Ming
2012-02-13 20:48 ` Rafael J. Wysocki
2012-02-14 7:59 ` Zhang Rui
2012-02-14 22:36 ` Rafael J. Wysocki
2012-02-16 7:18 ` Zhang Rui
2012-02-16 15:13 ` Alan Stern
2012-02-17 1:12 ` Lin Ming
2012-02-17 22:37 ` Rafael J. Wysocki
2012-02-17 7:05 ` Zhang, Rui
2012-02-17 15:07 ` Alan Stern
2012-02-21 14:07 ` Lin Ming
2012-02-21 16:06 ` Alan Stern
2012-02-23 13:41 ` Lin Ming
2012-02-23 18:10 ` Alan Stern
2012-02-17 22:34 ` Rafael J. Wysocki
2012-02-20 5:43 ` Zhang Rui
2012-02-13 9:11 ` [RFC PATCH 3/6] ACPI: Runtime resume all devices covered by a power resource Lin Ming
2012-02-13 9:11 ` [RFC PATCH 4/6] PM / Runtime: Introduce flag can_power_off Lin Ming
2012-02-13 15:01 ` Alan Stern
2012-02-13 19:38 ` Rafael J. Wysocki
2012-02-13 20:41 ` Alan Stern
2012-02-13 20:50 ` Rafael J. Wysocki
2012-02-14 7:11 ` Zhang Rui
2012-02-14 22:38 ` Rafael J. Wysocki
2012-02-14 6:17 ` Zhang Rui
2012-02-14 22:39 ` Rafael J. Wysocki
2012-02-16 7:41 ` Zhang Rui
2012-02-17 23:54 ` Rafael J. Wysocki
2012-02-18 12:54 ` huang ying
2012-02-18 20:35 ` Rafael J. Wysocki
2012-02-20 3:23 ` Zhang Rui
2012-02-20 23:13 ` Rafael J. Wysocki
2012-02-21 1:13 ` Zhang Rui
2012-02-21 21:43 ` Rafael J. Wysocki
2012-02-22 0:57 ` Zhang Rui
2012-02-14 6:07 ` Zhang Rui
2012-02-13 9:11 ` Lin Ming [this message]
2012-02-13 20:49 ` [RFC PATCH 5/6] PCI: Move acpi_dev_run_wake to acpi core Rafael J. Wysocki
2012-02-13 9:11 ` [RFC PATCH 6/6] libata: add ZPODD support Lin Ming
2012-02-15 6:06 ` Aaron Lu
2012-02-15 6:46 ` Lin Ming
2012-02-15 7:18 ` Aaron Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1329124271-29464-6-git-send-email-ming.m.lin@intel.com \
--to=ming.m.lin@intel.com \
--cc=jgarzik@pobox.com \
--cc=lenb@kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=rui.zhang@intel.com \
--cc=stern@rowland.harvard.edu \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).