From: Adko Branil <adkobranil@yahoo.com>
To: Mikael Pettersson <mikpe@it.uu.se>
Cc: Borislav Petkov <bp@alien8.de>, Jeff Garzik <jgarzik@pobox.com>,
linux-ide <linux-ide@vger.kernel.org>,
lkml <linux-kernel@vger.kernel.org>"linux-ide@vger.kernel.org"
<linux-ide@vger.kernel.org>,
Dan Merillat <dan.merillat@gmail.com>,
"Rafael J. Wysocki" <rjw@sisk.pl>
Subject: Re: HDD problem, software bug, bios bug, or hardware ?
Date: Fri, 7 Sep 2012 04:32:56 -0700 (PDT) [thread overview]
Message-ID: <1347017576.44763.YahooMailNeo@web124703.mail.ne1.yahoo.com> (raw)
In-Reply-To: <20547.48101.900727.735398@pilspetsen.it.uu.se>
After updating bios no more crashes happened, i tested it many times on heavy HDD IO loads, with many kernels (including CONFIG_PREEMPT kernels). But now if enable "Cool'n' Quiet" option in bios, CONFIG_PREEMPT_VOLUNTARY kernel with passed "nosmp" at boot time, crashes during boot process with kernel panic, while CONFIG_PREEMPT kernlel without "nosmp" works fine - but it is another story i think, should not be related with the crashes when it was old bios, and i think it is probably "nosmp" the reason. (i have never changed cpu frequency of this cpu at all) When "Cool'n' Quiet" is disabled, the system works perfectly adequately with all kind of kernels i tried. Except that this warning message in dmesg still appears (if it is problem at all). I put here this message for "nosmp" case as well, kernel is 3.5.2:
[ 1.912494] =================================
[ 1.912494] [ INFO: inconsistent lock state ]
[ 1.912494] 3.5.2 #4 Not tainted
[ 1.912494] ---------------------------------
[ 1.912494] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
[ 1.912494] swapper/0/1 [HC1[1]:SC1[1]:HE0:SE0] takes:
[ 1.912494] (&(&host->lock)->rlock){?.+...}, at: [<ffffffff818f4e47>] ata_bmdma_interrupt+0x27/0x1d0
[ 1.912494] {HARDIRQ-ON-W} state was registered at:
[ 1.912494] [<ffffffff810998fb>] __lock_acquire+0x61b/0x1af0
[ 1.912494] [<ffffffff8109b31a>] lock_acquire+0x8a/0x110
[ 1.912494] [<ffffffff81b4d051>] _raw_spin_lock+0x31/0x40
[ 1.912494] [<ffffffff8190b3c5>] pdc_sata_hardreset+0x85/0x100
[ 1.912494] [<ffffffff818eabba>] ata_do_reset+0x3a/0x90
[ 1.912494] [<ffffffff818edd72>] ata_eh_reset+0x372/0xe00
[ 1.912494] [<ffffffff818eec25>] ata_eh_recover+0x2a5/0x13d0
[ 1.912494] [<ffffffff818f073d>] ata_do_eh+0x4d/0xb0
[ 1.912494] [<ffffffff818f33ba>] ata_sff_error_handler+0xca/0x120
[ 1.912494] [<ffffffff8190a9e4>] pdc_error_handler+0x24/0x30
[ 1.912494] [<ffffffff818f029c>] ata_scsi_port_error_handler+0x47c/0x800
[ 1.912494] [<ffffffff818f06be>] ata_scsi_error+0x9e/0xd0
[ 1.912494] [<ffffffff816732e8>] scsi_error_handler+0xf8/0x500
[ 1.912494] [<ffffffff810654fe>] kthread+0xae/0xc0
[ 1.912494] [<ffffffff81b4f5f4>] kernel_thread_helper+0x4/0x10
[ 1.912494] irq event stamp: 661637
[ 1.912494] hardirqs last enabled at (661636): [<ffffffff81049ff1>] __do_softirq+0x71/0x1f0
[ 1.912494] hardirqs last disabled at (661637): [<ffffffff81b4da67>] common_interrupt+0x67/0x6c
[ 1.912494] softirqs last enabled at (661610): [<ffffffff8104a0b4>] __do_softirq+0x134/0x1f0
[ 1.912494] softirqs last disabled at (661635): [<ffffffff81b4f6ec>] call_softirq+0x1c/0x30
[ 1.912494]
[ 1.912494] other info that might help us debug this:
[ 1.912494] Possible unsafe locking scenario:
[ 1.912494]
[ 1.912494] CPU0
[ 1.912494] ----
[ 1.912494] lock(&(&host->lock)->rlock);
[ 1.912494] <Interrupt>
[ 1.912494] lock(&(&host->lock)->rlock);
[ 1.912494]
[ 1.912494] *** DEADLOCK ***
[ 1.912494]
[ 1.912494] 5 locks held by swapper/0/1:
[ 1.912494] #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81636b1b>] __driver_attach+0x5b/0xb0
[ 1.912494] #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81636b29>] __driver_attach+0x69/0xb0
[ 1.912494] #2: (usb_bus_list_lock){+.+.+.}, at: [<ffffffff81954f95>] usb_add_hcd+0x295/0x6a0
[ 1.912494] #3: (&__lockdep_no_validate__){......}, at: [<ffffffff816367ea>] device_attach+0x2a/0xc0
[ 1.912494] #4: (&__lockdep_no_validate__){......}, at: [<ffffffff816367ea>] device_attach+0x2a/0xc0
[ 1.912494]
[ 1.912494] stack backtrace:
[ 1.912494] Pid: 1, comm: swapper/0 Not tainted 3.5.2 #4
[ 1.912494] Call Trace:
[ 1.912494] <IRQ> [<ffffffff81b35961>] print_usage_bug+0x1f7/0x208
[ 1.912494] [<ffffffff8101001f>] ? save_stack_trace+0x2f/0x50
[ 1.912494] [<ffffffff81098730>] ? print_shortest_lock_dependencies+0x1d0/0x1d0
[ 1.912494] [<ffffffff810992a2>] mark_lock+0x262/0x2a0
[ 1.912494] [<ffffffff810995b5>] ? __lock_acquire+0x2d5/0x1af0
[ 1.912494] [<ffffffff81099af3>] __lock_acquire+0x813/0x1af0
[ 1.912494] [<ffffffff810995b5>] ? __lock_acquire+0x2d5/0x1af0
[ 1.912494] [<ffffffff8109b31a>] lock_acquire+0x8a/0x110
[ 1.912494] [<ffffffff818f4e47>] ? ata_bmdma_interrupt+0x27/0x1d0
[ 1.912494] [<ffffffff81079258>] ? cpuacct_charge+0xa8/0xf0
[ 1.912494] [<ffffffff81b4d151>] _raw_spin_lock_irqsave+0x41/0x60
[ 1.912494] [<ffffffff818f4e47>] ? ata_bmdma_interrupt+0x27/0x1d0
[ 1.912494] [<ffffffff818f4e47>] ata_bmdma_interrupt+0x27/0x1d0
[ 1.912494] [<ffffffff810061f2>] ? mask_and_ack_8259A+0x32/0x110
[ 1.912494] [<ffffffff810c2d5d>] handle_irq_event_percpu+0x5d/0x1f0
[ 1.912494] [<ffffffff810c2f38>] handle_irq_event+0x48/0x70
[ 1.912494] [<ffffffff8100622e>] ? mask_and_ack_8259A+0x6e/0x110
[ 1.912494] [<ffffffff810c5a3e>] ? handle_level_irq+0x1e/0xc0
[ 1.912494] [<ffffffff810c5a91>] handle_level_irq+0x71/0xc0
[ 1.912494] [<ffffffff81003ce2>] handle_irq+0x22/0x40
[ 1.912494] [<ffffffff81b4fdaa>] do_IRQ+0x5a/0xe0
[ 1.912494] [<ffffffff81b4da6c>] common_interrupt+0x6c/0x6c
[ 1.912494] [<ffffffff810c2f43>] ? handle_irq_event+0x53/0x70
[ 1.912494] [<ffffffff81049ff9>] ? __do_softirq+0x79/0x1f0
[ 1.912494] [<ffffffff81b4f6ec>] call_softirq+0x1c/0x30
[ 1.912494] [<ffffffff81003d85>] do_softirq+0x85/0xc0
[ 1.912494] [<ffffffff8104a425>] irq_exit+0xb5/0xc0
[ 1.912494] [<ffffffff81b4fdb3>] do_IRQ+0x63/0xe0
[ 1.912494] [<ffffffff81b4da6c>] common_interrupt+0x6c/0x6c
[ 1.912494] <EOI> [<ffffffff8104378b>] ? vprintk_emit+0x16b/0x4c0
[ 1.912494] [<ffffffff81b34815>] printk_emit+0x31/0x33
[ 1.912494] [<ffffffff81138f64>] ? kfree+0xd4/0x160
[ 1.912494] [<ffffffff81632c97>] __dev_printk+0x127/0x240
[ 1.912494] [<ffffffff81138f25>] ? kfree+0x95/0x160
[ 1.912494] [<ffffffff8195818f>] ? usb_control_msg+0xef/0x130
[ 1.912494] [<ffffffff8109bd25>] ? trace_hardirqs_on_caller+0x105/0x190
[ 1.912494] [<ffffffff8109bdbd>] ? trace_hardirqs_on+0xd/0x10
[ 1.912494] [<ffffffff81632e03>] _dev_info+0x53/0x60
[ 1.912494] [<ffffffff8195159a>] hub_probe+0x3ea/0x850
[ 1.912494] [<ffffffff81b4b3de>] ? mutex_unlock+0xe/0x10
[ 1.912494] [<ffffffff8195b494>] usb_probe_interface+0x184/0x230
[ 1.912494] [<ffffffff8163692e>] driver_probe_device+0x7e/0x210
[ 1.912494] [<ffffffff81636b70>] ? __driver_attach+0xb0/0xb0
[ 1.912494] [<ffffffff81636bbb>] __device_attach+0x4b/0x60
[ 1.912494] [<ffffffff81634a4e>] bus_for_each_drv+0x4e/0xa0
[ 1.912494] [<ffffffff81636867>] device_attach+0xa7/0xc0
[ 1.912494] [<ffffffff81635ce0>] bus_probe_device+0xb0/0xe0
[ 1.912494] [<ffffffff8163404d>] device_add+0x5cd/0x6a0
[ 1.912494] [<ffffffff8195977e>] usb_set_configuration+0x4be/0x710
[ 1.912494] [<ffffffff81962fb3>] generic_probe+0x43/0xa0
[ 1.912494] [<ffffffff8195b56f>] usb_probe_device+0x2f/0x60
[ 1.912494] [<ffffffff8163692e>] driver_probe_device+0x7e/0x210
[ 1.912494] [<ffffffff81636b70>] ? __driver_attach+0xb0/0xb0
[ 1.912494] [<ffffffff81636bbb>] __device_attach+0x4b/0x60
[ 1.912494] [<ffffffff81634a4e>] bus_for_each_drv+0x4e/0xa0
[ 1.912494] [<ffffffff81636867>] device_attach+0xa7/0xc0
[ 1.912494] [<ffffffff81635ce0>] bus_probe_device+0xb0/0xe0
[ 1.912494] [<ffffffff8163404d>] device_add+0x5cd/0x6a0
[ 1.912494] [<ffffffff81951bdc>] usb_new_device+0x1dc/0x2a0
[ 1.912494] [<ffffffff8195506b>] usb_add_hcd+0x36b/0x6a0
[ 1.912494] [<ffffffff819641a9>] usb_hcd_pci_probe+0x249/0x3c0
[ 1.912494] [<ffffffff815a629f>] pci_device_probe+0xaf/0x130
[ 1.912494] [<ffffffff8163692e>] driver_probe_device+0x7e/0x210
[ 1.912494] [<ffffffff81636b6b>] __driver_attach+0xab/0xb0
[ 1.912494] [<ffffffff81636ac0>] ? driver_probe_device+0x210/0x210
[ 1.912494] [<ffffffff81634af5>] bus_for_each_dev+0x55/0x90
[ 1.912494] [<ffffffff82162f4d>] ? ohci_hcd_mod_init+0x54/0x54
[ 1.912494] [<ffffffff8163629e>] driver_attach+0x1e/0x20
[ 1.912494] [<ffffffff81635ff8>] bus_add_driver+0x1a8/0x270
[ 1.912494] [<ffffffff82162f4d>] ? ohci_hcd_mod_init+0x54/0x54
[ 1.912494] [<ffffffff81637217>] driver_register+0x77/0x150
[ 1.912494] [<ffffffff82162f4d>] ? ohci_hcd_mod_init+0x54/0x54
[ 1.912494] [<ffffffff815a4fff>] __pci_register_driver+0x6f/0xe0
[ 1.912494] [<ffffffff82162f4d>] ? ohci_hcd_mod_init+0x54/0x54
[ 1.912494] [<ffffffff82162f4d>] ? ohci_hcd_mod_init+0x54/0x54
[ 1.912494] [<ffffffff82162fcd>] uhci_hcd_init+0x80/0xc3
[ 1.912494] [<ffffffff82162f4d>] ? ohci_hcd_mod_init+0x54/0x54
[ 1.912494] [<ffffffff810002a2>] do_one_initcall+0x122/0x170
[ 1.912494] [<ffffffff8212cd03>] kernel_init+0x139/0x1bd
[ 1.912494] [<ffffffff8212c5af>] ? do_early_param+0x8c/0x8c
[ 1.912494] [<ffffffff81b4f5f4>] kernel_thread_helper+0x4/0x10
[ 1.912494] [<ffffffff81b4db19>] ? retint_restore_args+0xe/0xe
[ 1.912494] [<ffffffff8212cbca>] ? start_kernel+0x3bc/0x3bc
[ 1.912494] [<ffffffff81b4f5f0>] ? gs_change+0xb/0xb
[ 3.201635] ata4.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
[ 3.209975] ata4.00: 390721968 sectors, multi 16: LBA48
[ 3.218619] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 3.227150] ata2: SATA link down (SStatus 0 SControl 0)
Thanks.
Best regards
Adko.
next prev parent reply other threads:[~2012-09-07 11:32 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-25 13:36 HDD problem, software bug, bios bug, or hardware ? Adko Branil
2012-08-25 17:46 ` Adko Branil
2012-08-26 13:01 ` Borislav Petkov
2012-08-27 17:01 ` Adko Branil
2012-08-27 17:21 ` Felix Miata
2012-08-27 21:59 ` Borislav Petkov
2012-08-29 17:02 ` Adko Branil
2012-08-29 17:31 ` Adko Branil
2012-08-30 10:12 ` Borislav Petkov
[not found] ` <1346259574.81504.YahooMailNeo@web124706.mail.ne1.yahoo.com>
2012-08-30 9:58 ` Borislav Petkov
2012-08-30 10:11 ` Borislav Petkov
2012-08-30 11:10 ` Adko Branil
2012-09-02 20:04 ` Mikael Pettersson
2012-09-03 21:46 ` Adko Branil
2012-09-07 11:32 ` Adko Branil [this message]
2012-09-08 16:30 ` Mikael Pettersson
2012-09-08 17:22 ` Adko Branil
2012-09-11 13:38 ` Adko Branil
2012-09-10 9:15 ` Borislav Petkov
2012-09-10 9:17 ` Borislav Petkov
-- strict thread matches above, loose matches on Subject: below --
2012-08-25 1:31 Adko Branil
2012-08-25 11:33 ` Borislav Petkov
2012-08-27 7:50 ` Rafael J. Wysocki
2012-09-01 12:45 ` Dan Merillat
2012-09-02 7:24 ` Borislav Petkov
2012-09-03 0:38 ` Dan Merillat
2012-09-10 20:51 ` Borislav Petkov
2012-09-10 21:29 ` Dan Merillat
2012-09-10 21:59 ` Borislav Petkov
2012-09-15 1:34 ` Dan Merillat
2012-09-15 10:34 ` Borislav Petkov
2012-08-25 0:54 Adko Branil
2012-08-25 2:58 ` Felix Miata
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347017576.44763.YahooMailNeo@web124703.mail.ne1.yahoo.com \
--to=adkobranil@yahoo.com \
--cc=bp@alien8.de \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikpe@it.uu.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox