linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Brian Norris <computersforpeace@gmail.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org,
	Brian Norris <computersforpeace@gmail.com>,
	Tejun Heo <tj@kernel.org>
Subject: [PATCH 03/14] ahci_platform: perform platform exit in host_stop() hook
Date: Fri,  2 Nov 2012 00:46:17 -0700	[thread overview]
Message-ID: <1351842388-27210-4-git-send-email-computersforpeace@gmail.com> (raw)
In-Reply-To: <1351842388-27210-1-git-send-email-computersforpeace@gmail.com>

AHCI platform devices may provide an exit() routine, via
ahci_platform_data, that powers off the SATA core. Such a routine should
be executed from the ata_port_operations host_stop() hook. That way, the
ATA subsystem can perform any last-minute hardware cleanup (via devres,
for example), then trigger the power-off at the appropriate time.

This patch fixes bus errors triggered during module removal or device
unbinding, seen on an SoC SATA core.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 drivers/ata/ahci_platform.c | 30 +++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)

diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 8ae1c6f..05806e0 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -25,6 +25,8 @@
 #include <linux/ahci_platform.h>
 #include "ahci.h"
 
+static void ahci_host_stop(struct ata_host *host);
+
 enum ahci_type {
 	AHCI,		/* standard platform ahci */
 	IMX53_AHCI,	/* ahci on i.mx53 */
@@ -47,6 +49,15 @@ static struct platform_device_id ahci_devtype[] = {
 };
 MODULE_DEVICE_TABLE(platform, ahci_devtype);
 
+struct ata_port_operations ahci_platform_ops = {
+	.inherits	= &ahci_ops,
+	.host_stop	= ahci_host_stop,
+};
+
+struct ata_port_operations ahci_platform_retry_srst_ops = {
+	.inherits	= &ahci_pmp_retry_srst_ops,
+	.host_stop	= ahci_host_stop,
+};
 
 static const struct ata_port_info ahci_port_info[] = {
 	/* by features */
@@ -54,20 +65,20 @@ static const struct ata_port_info ahci_port_info[] = {
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
-		.port_ops	= &ahci_ops,
+		.port_ops	= &ahci_platform_ops,
 	},
 	[IMX53_AHCI] = {
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
-		.port_ops	= &ahci_pmp_retry_srst_ops,
+		.port_ops	= &ahci_platform_retry_srst_ops,
 	},
 	[STRICT_AHCI] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_DELAY_ENGINE),
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
-		.port_ops	= &ahci_ops,
+		.port_ops	= &ahci_platform_ops,
 	},
 };
 
@@ -221,12 +232,19 @@ free_clk:
 static int __devexit ahci_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct ahci_platform_data *pdata = dev_get_platdata(dev);
 	struct ata_host *host = dev_get_drvdata(dev);
-	struct ahci_host_priv *hpriv = host->private_data;
 
 	ata_host_detach(host);
 
+	return 0;
+}
+
+static void ahci_host_stop(struct ata_host *host)
+{
+	struct device *dev = host->dev;
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+
 	if (pdata && pdata->exit)
 		pdata->exit(dev);
 
@@ -234,8 +252,6 @@ static int __devexit ahci_remove(struct platform_device *pdev)
 		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
-
-	return 0;
 }
 
 #ifdef CONFIG_PM
-- 
1.7.11.3


  parent reply	other threads:[~2012-11-02  7:46 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-02  7:46 [PATCH 00/14] ahci/libata: clean up platform device removal Brian Norris
2012-11-02  7:46 ` [PATCH 01/14] ahci_platform: enable hotplug unbinding Brian Norris
2012-11-02  7:46 ` [PATCH 02/14] ahci_platform: convert to module_platform_driver Brian Norris
2012-11-02  7:46 ` Brian Norris [this message]
2012-11-02  7:46 ` [PATCH 04/14] libata: implement ata_platform_remove_one() Brian Norris
2012-11-02 11:07   ` Sergei Shtylyov
2012-11-02 19:05     ` Brian Norris
2012-11-02 19:09   ` [PATCH v2 " Brian Norris
2012-11-02 19:29     ` [PATCH v3 " Brian Norris
2012-11-02 20:12     ` [PATCH v2 " Sergei Shtylyov
2012-11-02 19:29       ` Brian Norris
2012-11-02  7:46 ` [PATCH 05/14] ahci_platform: utilize common ata_platform_remove_one() Brian Norris
2012-11-02  7:46 ` [PATCH 06/14] pata_ixp4xx_cf: " Brian Norris
2012-11-02  7:46 ` [PATCH 07/14] pata_mpc52xx: " Brian Norris
2012-11-02  7:46 ` [PATCH 08/14] pata_of_platform: " Brian Norris
2012-11-02  7:46 ` [PATCH 09/14] pata_platform: " Brian Norris
2012-11-02  7:46 ` [PATCH 10/14] ata_platform: remove unused remove function Brian Norris
2012-11-02  7:46 ` [PATCH 11/14] pata_palmld: utilize common ata_platform_remove_one() Brian Norris
2012-11-02  7:46 ` [PATCH 12/14] sata_highbank: " Brian Norris
2012-11-02 19:12   ` [PATCH v2 " Brian Norris
2012-12-03 10:17     ` Jeff Garzik
2012-12-03 18:12       ` Brian Norris
2012-11-02  7:46 ` [PATCH 13/14] pata_octeon_cf: perform host detach, removal on exit Brian Norris
2012-11-02  7:46 ` [PATCH 14/14] libata: use pci_get_drvdata() helper Brian Norris
2012-11-02 17:01 ` [PATCH 00/14] ahci/libata: clean up platform device removal Tejun Heo
2012-11-02 19:03   ` Brian Norris
2012-11-02 19:04     ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351842388-27210-4-git-send-email-computersforpeace@gmail.com \
    --to=computersforpeace@gmail.com \
    --cc=jgarzik@pobox.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).