[PATCH RESEND v2 2/2] libata: Add support for queued DSM TRIM

[Marc C <marc.ceeeee@gmail.com>]

From: Marc Carino <marc.ceeeee@gmail.com>

Some new SSDs support the queued version of the DSM TRIM command.
Let the driver use the new command if supported.

Signed-off-by: Marc Carino <marc.ceeeee@gmail.com>
---
 drivers/ata/libata-scsi.c | 27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b1e880a..94b0f5e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3100,12 +3100,27 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
 	buf = page_address(sg_page(scsi_sglist(scmd)));
 	size = ata_set_lba_range_entries(buf, 512, block, n_block);
 
-	tf->protocol = ATA_PROT_DMA;
-	tf->hob_feature = 0;
-	tf->feature = ATA_DSM_TRIM;
-	tf->hob_nsect = (size / 512) >> 8;
-	tf->nsect = size / 512;
-	tf->command = ATA_CMD_DSM;
+	if (ata_ncq_enabled(dev) &&
+	    (dev->ncq_send_recv_cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &
+	     ATA_LOG_NCQ_SEND_RECV_DSM_TRIM)) {
+		/* Newer devices support queued TRIM commands */
+		tf->protocol = ATA_PROT_NCQ;
+		tf->command = ATA_CMD_FPDMA_SEND;
+		tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f;
+		tf->nsect = qc->tag << 3;
+		tf->hob_feature = (size / 512) >> 8;
+		tf->feature = size / 512;
+
+		qc->auxiliary = 1;
+	} else {
+		tf->protocol = ATA_PROT_DMA;
+		tf->hob_feature = 0;
+		tf->feature = ATA_DSM_TRIM;
+		tf->hob_nsect = (size / 512) >> 8;
+		tf->nsect = size / 512;
+		tf->command = ATA_CMD_DSM;
+	}
+
 	tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 |
 		     ATA_TFLAG_WRITE;
 
-- 
1.8.1.2