linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Quentin Lambert <lambert.quentin@gmail.com>
To: "David S. Miller" <davem@davemloft.net>,
	linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org,
	Quentin Lambert <lambert.quentin@gmail.com>
Subject: [PATCH v2] ide: remove deprecated use of pci api
Date: Mon, 13 Apr 2015 10:26:53 +0200	[thread overview]
Message-ID: <1428913613-12375-1-git-send-email-lambert.quentin@gmail.com> (raw)

Replace occurences of the pci api by appropriate call to the dma api.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr)

@deprecated@
idexpression id;
position p;
@@

(
  pci_dma_supported@p ( id, ...)
|
  pci_alloc_consistent@p ( id, ...)
)

@bad1@
idexpression id;
position deprecated.p;
@@
...when != &id->dev
   when != pci_get_drvdata ( id )
   when != pci_enable_device ( id )
(
  pci_dma_supported@p ( id, ...)
|
  pci_alloc_consistent@p ( id, ...)
)

@depends on !bad1@
idexpression id;
expression direction;
position deprecated.p;
@@

(
- pci_dma_supported@p ( id,
+ dma_supported ( &id->dev,
...
+ , GFP_ATOMIC
  )
|
- pci_alloc_consistent@p ( id,
+ dma_alloc_coherent ( &id->dev,
...
+ , GFP_ATOMIC
  )
)

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
---
 Changes since v1:
  - fold the two patches into one, GFP_ATOMIC is now replaced by
    GFP_KERNEL

 drivers/ide/cs5520.c    |    2 +-
 drivers/ide/pmac.c      |    5 ++---
 drivers/ide/setup-pci.c |    2 +-
 drivers/ide/sgiioc4.c   |    4 ++--
 4 files changed, 6 insertions(+), 7 deletions(-)

--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -123,7 +123,7 @@ static int cs5520_init_one(struct pci_de
 		return -ENODEV;
 	}
 	pci_set_master(dev);
-	if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
+	if (dma_set_mask(&dev->dev, DMA_BIT_MASK(32))) {
 		printk(KERN_WARNING "%s: No suitable DMA available.\n",
 			d->name);
 		return -ENODEV;
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1689,10 +1689,9 @@ static int pmac_ide_init_dma(ide_hwif_t
 	 * The +2 is +1 for the stop command and +1 to allow for
 	 * aligning the start address to a multiple of 16 bytes.
 	 */
-	pmif->dma_table_cpu = pci_alloc_consistent(
-		dev,
+	pmif->dma_table_cpu = dma_alloc_coherent(&dev->dev,
 		(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
-		&hwif->dmatable_dma);
+		&hwif->dmatable_dma, GFP_KERNEL);
 	if (pmif->dma_table_cpu == NULL) {
 		printk(KERN_ERR "%s: unable to allocate DMA command list\n",
 		       hwif->name);
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -209,7 +209,7 @@ static int ide_pci_enable(struct pci_dev
 	 * a DMA mask field to the struct ide_port_info if we need it
 	 * (or let lower level driver set the DMA mask)
 	 */
-	ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
+	ret = dma_set_mask(&dev->dev, DMA_BIT_MASK(32));
 	if (ret < 0) {
 		printk(KERN_ERR "%s %s: can't set DMA mask\n",
 			d->name, pci_name(dev));
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -334,8 +334,8 @@ static int ide_dma_sgiioc4(ide_hwif_t *h
 	if (ide_allocate_dma_engine(hwif))
 		goto dma_pci_alloc_failure;
 
-	pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
-				   (dma_addr_t *)&hwif->extra_base);
+	pad = dma_alloc_coherent(&dev->dev, IOC4_IDE_CACHELINE_SIZE,
+				   (dma_addr_t *)&hwif->extra_base, GFP_KERNEL);
 	if (pad) {
 		ide_set_hwifdata(hwif, pad);
 		return 0;

             reply	other threads:[~2015-04-13  8:26 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-13  8:26 Quentin Lambert [this message]
2015-04-13  9:56 ` [PATCH v2] ide: remove deprecated use of pci api Dan Carpenter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1428913613-12375-1-git-send-email-lambert.quentin@gmail.com \
    --to=lambert.quentin@gmail.com \
    --cc=davem@davemloft.net \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).