From: suman Tripathi <stripathi-qTEPVZfXA3Y@public.gmane.org>
To: olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org,
tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org
Cc: linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
mlangsdo-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
jcm-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
patches-qTEPVZfXA3Y@public.gmane.org,
Suman Tripathi <stripathi-qTEPVZfXA3Y@public.gmane.org>
Subject: [PATCH v3 2/3] libahci: ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci.
Date: Fri, 5 Feb 2016 02:50:25 +0530 [thread overview]
Message-ID: <1454620826-22554-3-git-send-email-stripathi@apm.com> (raw)
In-Reply-To: <1454620826-22554-1-git-send-email-stripathi-qTEPVZfXA3Y@public.gmane.org>
From: Suman Tripathi <stripathi-qTEPVZfXA3Y@public.gmane.org>
This patch removes the AHCI_HFLAG_EDGE_IRQ support from libahci.
The flexibility to override the irq handlers in the LLD's are
already present, so controller's implementing a EDGE triger latch
can implement their own interrupt handler inside the driver.
Signed-off-by: Suman Tripathi <stripathi-qTEPVZfXA3Y@public.gmane.org>
---
drivers/ata/ahci.h | 3 +--
drivers/ata/ahci_xgene.c | 40 +++++++++++++++++++++++++++++++++++++++-
drivers/ata/libahci.c | 44 ++------------------------------------------
3 files changed, 42 insertions(+), 45 deletions(-)
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 3d883ee..284ce3a 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -240,8 +240,7 @@ enum {
error-handling stage) */
AHCI_HFLAG_NO_DEVSLP = (1 << 17), /* no device sleep */
AHCI_HFLAG_NO_FBS = (1 << 18), /* no FBS */
- AHCI_HFLAG_EDGE_IRQ = (1 << 19), /* HOST_IRQ_STAT behaves as
- Edge Triggered */
+
#ifdef CONFIG_PCI_MSI
AHCI_HFLAG_MULTI_MSI = (1 << 20), /* multiple PCI MSIs */
AHCI_HFLAG_MULTI_MSIX = (1 << 21), /* per-port MSI-X */
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index e2c6d9e..a56ceeb 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -548,6 +548,43 @@ softreset_retry:
return rc;
}
+static irqreturn_t xgene_ahci_irq_intr(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ struct ahci_host_priv *hpriv;
+ unsigned int rc = 0;
+ void __iomem *mmio;
+ u32 irq_stat, irq_masked;
+
+ VPRINTK("ENTER\n");
+
+ hpriv = host->private_data;
+ mmio = hpriv->mmio;
+
+ /* sigh. 0xffffffff is a valid return from h/w */
+ irq_stat = readl(mmio + HOST_IRQ_STAT);
+ if (!irq_stat)
+ return IRQ_NONE;
+
+ irq_masked = irq_stat & hpriv->port_map;
+
+ spin_lock(&host->lock);
+
+ /*
+ * HOST_IRQ_STAT behaves as edge triggered latch meaning that
+ * it should be cleared before all the port events are cleared.
+ */
+ writel(irq_stat, mmio + HOST_IRQ_STAT);
+
+ rc = ahci_handle_port_intr(host, irq_masked);
+
+ spin_unlock(&host->lock);
+
+ VPRINTK("EXIT\n");
+
+ return IRQ_RETVAL(rc);
+}
+
static struct ata_port_operations xgene_ahci_v1_ops = {
.inherits = &ahci_ops,
.host_stop = xgene_ahci_host_stop,
@@ -779,7 +816,8 @@ skip_clk_phy:
hpriv->flags = AHCI_HFLAG_NO_NCQ;
break;
case XGENE_AHCI_V2:
- hpriv->flags |= AHCI_HFLAG_YES_FBS | AHCI_HFLAG_EDGE_IRQ;
+ hpriv->flags |= AHCI_HFLAG_YES_FBS;
+ hpriv->ahci_irq_intr = xgene_ahci_irq_intr;
break;
default:
break;
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 5d3035a..424d2b3 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1844,43 +1844,6 @@ u32 ahci_handle_port_intr(struct ata_host *host, u32 irq_masked)
}
EXPORT_SYMBOL_GPL(ahci_handle_port_intr);
-static irqreturn_t ahci_single_edge_irq_intr(int irq, void *dev_instance)
-{
- struct ata_host *host = dev_instance;
- struct ahci_host_priv *hpriv;
- unsigned int rc = 0;
- void __iomem *mmio;
- u32 irq_stat, irq_masked;
-
- VPRINTK("ENTER\n");
-
- hpriv = host->private_data;
- mmio = hpriv->mmio;
-
- /* sigh. 0xffffffff is a valid return from h/w */
- irq_stat = readl(mmio + HOST_IRQ_STAT);
- if (!irq_stat)
- return IRQ_NONE;
-
- irq_masked = irq_stat & hpriv->port_map;
-
- spin_lock(&host->lock);
-
- /*
- * HOST_IRQ_STAT behaves as edge triggered latch meaning that
- * it should be cleared before all the port events are cleared.
- */
- writel(irq_stat, mmio + HOST_IRQ_STAT);
-
- rc = ahci_handle_port_intr(host, irq_masked);
-
- spin_unlock(&host->lock);
-
- VPRINTK("EXIT\n");
-
- return IRQ_RETVAL(rc);
-}
-
static irqreturn_t ahci_single_level_irq_intr(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
@@ -2517,11 +2480,8 @@ int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht)
and custom irq handler implemented\n");
} else {
- if (!ahci_irq_handler) {
- ahci_irq_handler = (hpriv->flags & AHCI_HFLAG_EDGE_IRQ ?
- ahci_single_edge_irq_intr :
- ahci_single_level_irq_intr);
- }
+ if (!ahci_irq_handler)
+ ahci_irq_handler = ahci_single_level_irq_intr;
}
rc = ata_host_activate(host, irq, ahci_irq_handler,
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-02-04 21:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-04 21:20 [PATCH v3 0/3] ata: Fixes related to edge trigger latch for the ahci_xgene_driver suman Tripathi
2016-02-04 21:20 ` [PATCH v3 1/3] libahci: Implement the capability to override the generic ahci interrupt handler suman Tripathi
2016-02-05 14:12 ` Sergei Shtylyov
2016-02-05 16:41 ` Tejun Heo
2016-02-05 18:06 ` Suman Tripathi
[not found] ` <1454620826-22554-1-git-send-email-stripathi-qTEPVZfXA3Y@public.gmane.org>
2016-02-04 21:20 ` suman Tripathi [this message]
2016-02-04 21:20 ` [PATCH v3 3/3] ahci_xgene: Implement the workaround to fix the missing of edge interrupt for HOST_IRQ_STAT suman Tripathi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454620826-22554-3-git-send-email-stripathi@apm.com \
--to=stripathi-qtepvzfxa3y@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jcm-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mlangsdo-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=patches-qTEPVZfXA3Y@public.gmane.org \
--cc=tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox