[PATCH 0/5] ata: add support for Marvell Armada 7K/8K AHCI

[Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>]

Hello,

The following small series adds support for the Marvell Armada 7K/8K
AHCI controller. This controller is a standard AHCI controller, so not
much is needed, except that it uses a non-default port offset and
length. Due to this, some preparatory patches are used to make it
possible to override the default port offset/length used by the AHCI
core.

Thanks!

Thomas

Thomas Petazzoni (5):
  ata: ahci: add support for non-standard port offset/length
  ata: acard-ahci: use the new port_{offset,length} members
  ata: ahci_ceva: use the new port_{offset,length} members
  ata: ahci_mvebu: add support for Armada 8K
  dt-bindings: ata: add compatible string for Armada 8K to ahci-platform

 Documentation/devicetree/bindings/ata/ahci-platform.txt | 1 +
 drivers/ata/acard-ahci.c                                | 3 ++-
 drivers/ata/ahci.c                                      | 5 +++--
 drivers/ata/ahci.h                                      | 7 ++++++-
 drivers/ata/ahci_ceva.c                                 | 5 ++---
 drivers/ata/ahci_mvebu.c                                | 5 +++++
 drivers/ata/libahci_platform.c                          | 7 ++++++-
 7 files changed, 25 insertions(+), 8 deletions(-)

-- 
2.6.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html