From: Hannes Reinecke <hare@suse.de>
To: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org,
Shaun Tancheff <shaun.tancheff@seagate.com>,
Damien Le Moal <damien.lemoal@hgst.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>,
Hannes Reinecke <hare@suse.com>
Subject: [PATCHv3 12/14] libata: NCQ encapsulation for ZAC MANAGEMENT OUT
Date: Mon, 25 Apr 2016 12:45:54 +0200 [thread overview]
Message-ID: <1461581156-92581-13-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1461581156-92581-1-git-send-email-hare@suse.de>
Add NCQ encapsulation for ZAC MANAGEMENT OUT and evaluate
NCQ Non-Data log pages to figure out if NCQ encapsulation
is supported.
Signed-off-by: Hannes Reinecke <hare@suse.com>
---
drivers/ata/libata-core.c | 43 ++++++++++++++++++++++++++++++++++++++++---
drivers/ata/libata-scsi.c | 18 +++++++++++++-----
drivers/ata/libata-trace.c | 3 +++
include/linux/ata.h | 7 +++++++
include/linux/libata.h | 7 +++++++
5 files changed, 70 insertions(+), 8 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b2bd7c4..1528c7c 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2121,6 +2121,40 @@ static void ata_dev_config_ncq_send_recv(struct ata_device *dev)
}
}
+static void ata_dev_config_ncq_non_data(struct ata_device *dev)
+{
+ struct ata_port *ap = dev->link->ap;
+ unsigned int err_mask;
+ int log_index = ATA_LOG_NCQ_NON_DATA * 2;
+ u16 log_pages;
+
+ err_mask = ata_read_log_page(dev, ATA_LOG_DIRECTORY,
+ 0, ap->sector_buf, 1);
+ if (err_mask) {
+ ata_dev_dbg(dev,
+ "failed to get Log Directory Emask 0x%x\n",
+ err_mask);
+ return;
+ }
+ log_pages = get_unaligned_le16(&ap->sector_buf[log_index]);
+ if (!log_pages) {
+ ata_dev_warn(dev,
+ "NCQ Send/Recv Log not supported\n");
+ return;
+ }
+ err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_NON_DATA,
+ 0, ap->sector_buf, 1);
+ if (err_mask) {
+ ata_dev_dbg(dev,
+ "failed to get NCQ Non-Data Log Emask 0x%x\n",
+ err_mask);
+ } else {
+ u8 *cmds = dev->ncq_non_data_cmds;
+
+ memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_NON_DATA_SIZE);
+ }
+}
+
static int ata_dev_config_ncq(struct ata_device *dev,
char *desc, size_t desc_sz)
{
@@ -2165,9 +2199,12 @@ static int ata_dev_config_ncq(struct ata_device *dev,
snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
ddepth, aa_desc);
- if ((ap->flags & ATA_FLAG_FPDMA_AUX) &&
- ata_id_has_ncq_send_and_recv(dev->id))
- ata_dev_config_ncq_send_recv(dev);
+ if ((ap->flags & ATA_FLAG_FPDMA_AUX)) {
+ if (ata_id_has_ncq_send_and_recv(dev->id))
+ ata_dev_config_ncq_send_recv(dev);
+ if (ata_id_has_ncq_non_data(dev->id))
+ ata_dev_config_ncq_non_data(dev);
+ }
return 0;
}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 6afd084..43403aa 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3506,11 +3506,19 @@ static unsigned int ata_scsi_zbc_out_xlat(struct ata_queued_cmd *qc)
reset_all = cdb[14] & 0x1;
- tf->protocol = ATA_PROT_NODATA;
- tf->command = ATA_CMD_ZAC_MGMT_OUT;
- tf->feature = sa;
- tf->hob_feature = reset_all & 0x1;
-
+ if (ata_ncq_enabled(qc->dev) &&
+ ata_fpdma_zac_mgmt_out_supported(qc->dev)) {
+ tf->protocol = ATA_PROT_NCQ;
+ tf->command = ATA_CMD_NCQ_NON_DATA;
+ tf->hob_nsect = ATA_SUBCMD_NCQ_NON_DATA_ZAC_MGMT_OUT;
+ tf->nsect = qc->tag << 3;
+ tf->auxiliary = sa | (reset_all & 0x1) << 8;
+ } else {
+ tf->protocol = ATA_PROT_NODATA;
+ tf->command = ATA_CMD_ZAC_MGMT_OUT;
+ tf->feature = sa;
+ tf->hob_feature = reset_all & 0x1;
+ }
tf->lbah = (block >> 16) & 0xff;
tf->lbam = (block >> 8) & 0xff;
tf->lbal = block & 0xff;
diff --git a/drivers/ata/libata-trace.c b/drivers/ata/libata-trace.c
index 1111ba7..f8c550d 100644
--- a/drivers/ata/libata-trace.c
+++ b/drivers/ata/libata-trace.c
@@ -188,6 +188,9 @@ libata_trace_parse_subcmd(struct trace_seq *p, unsigned char cmd,
case ATA_SUBCMD_NCQ_NON_DATA_ZERO_EXT:
trace_seq_printf(p, " ZERO_EXT");
break;
+ case ATA_SUBCMD_NCQ_NON_DATA_ZAC_MGMT_OUT:
+ trace_seq_printf(p, " ZAC_MGMT_OUT");
+ break;
}
break;
case ATA_CMD_ZAC_MGMT_IN:
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 9d7c470..e627032 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -320,6 +320,7 @@ enum {
ATA_SUBCMD_NCQ_NON_DATA_ABORT_QUEUE = 0x00,
ATA_SUBCMD_NCQ_NON_DATA_SET_FEATURES = 0x05,
ATA_SUBCMD_NCQ_NON_DATA_ZERO_EXT = 0x06,
+ ATA_SUBCMD_NCQ_NON_DATA_ZAC_MGMT_OUT = 0x07,
/* Subcmds for ATA_CMD_ZAC_MGMT_IN */
ATA_SUBCMD_ZAC_MGMT_IN_REPORT_ZONES = 0x00,
@@ -333,6 +334,7 @@ enum {
/* READ_LOG_EXT pages */
ATA_LOG_DIRECTORY = 0x0,
ATA_LOG_SATA_NCQ = 0x10,
+ ATA_LOG_NCQ_NON_DATA = 0x12,
ATA_LOG_NCQ_SEND_RECV = 0x13,
ATA_LOG_SATA_ID_DEV_DATA = 0x30,
ATA_LOG_SATA_SETTINGS = 0x08,
@@ -877,6 +879,11 @@ static inline bool ata_id_has_ncq_send_and_recv(const u16 *id)
return id[ATA_ID_SATA_CAPABILITY_2] & BIT(6);
}
+static inline bool ata_id_has_ncq_non_data(const u16 *id)
+{
+ return id[ATA_ID_SATA_CAPABILITY_2] & BIT(5);
+}
+
static inline bool ata_id_has_trim(const u16 *id)
{
if (ata_id_major_version(id) >= 7 &&
diff --git a/include/linux/libata.h b/include/linux/libata.h
index c0806b6..0019d4b 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -729,6 +729,7 @@ struct ata_device {
/* NCQ send and receive log subcommand support */
u8 ncq_send_recv_cmds[ATA_LOG_NCQ_SEND_RECV_SIZE];
+ u8 ncq_non_data_cmds[ATA_LOG_NCQ_NON_DATA_SIZE];
/* error history */
int spdn_cnt;
@@ -1658,6 +1659,12 @@ static inline bool ata_fpdma_zac_mgmt_in_supported(struct ata_device *dev)
ATA_LOG_NCQ_SEND_RECV_ZAC_MGMT_IN_SUPPORTED);
}
+static inline bool ata_fpdma_zac_mgmt_out_supported(struct ata_device *dev)
+{
+ return (dev->ncq_non_data_cmds[ATA_LOG_NCQ_NON_DATA_ZAC_MGMT_OFFSET] &
+ ATA_LOG_NCQ_NON_DATA_ZAC_MGMT_OUT);
+}
+
static inline void ata_qc_set_polling(struct ata_queued_cmd *qc)
{
qc->tf.ctl |= ATA_NIEN;
--
1.8.5.6
next prev parent reply other threads:[~2016-04-25 10:45 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-25 10:45 [PATCHv3 00/14] libata: ZAC support Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 01/14] libata: do not attempt to retrieve sense code twice Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 02/14] libsas: enable FPDMA SEND/RECEIVE Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 03/14] libata/libsas: Define ATA_CMD_NCQ_NON_DATA Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 04/14] libata: Separate out ata_dev_config_ncq_send_recv() Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 05/14] libata: Add command definitions for NCQ Encapsulation for READ LOG DMA EXT Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 06/14] libata: Check log page directory before accessing pages Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 07/14] libata-trace: decode subcommands Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 08/14] libata-scsi: Generate sense code for disabled devices Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 09/14] libata: fixup ZAC device disabling Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 10/14] libata: implement ZBC IN translation Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 11/14] libata: Implement ZBC OUT translation Hannes Reinecke
2016-04-25 10:45 ` Hannes Reinecke [this message]
2016-05-13 8:32 ` [PATCHv3 12/14] libata: NCQ encapsulation for ZAC MANAGEMENT OUT Damien Le Moal
2016-05-13 8:53 ` Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 13/14] libata: support device-managed ZAC devices Hannes Reinecke
2016-04-25 12:17 ` Sergei Shtylyov
2016-04-25 10:45 ` [PATCHv3 14/14] libata: support host-aware and host-managed " Hannes Reinecke
2016-04-25 20:16 ` [PATCHv3 00/14] libata: ZAC support Tejun Heo
2016-05-06 11:05 ` Hannes Reinecke
2016-05-09 16:38 ` Tejun Heo
2016-04-26 0:42 ` Damien Le Moal
2016-04-26 5:47 ` Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461581156-92581-13-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=damien.lemoal@hgst.com \
--cc=hare@suse.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=shaun.tancheff@seagate.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).