From: Hannes Reinecke <hare@suse.de>
To: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org,
Shaun Tancheff <shaun.tancheff@seagate.com>,
Damien Le Moal <damien.lemoal@hgst.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCHv3 13/14] libata: support device-managed ZAC devices
Date: Mon, 25 Apr 2016 12:45:55 +0200 [thread overview]
Message-ID: <1461581156-92581-14-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1461581156-92581-1-git-send-email-hare@suse.de>
Device-managed ZAC devices just set the zoned capabilities field
in INQUIRY byte 69 (cf ACS-4). This corresponds to the 'zoned'
field in the block device characteristics VPD page.
As this is only defined in SPC-5/SBC-4 we also need to update
the supported SCSI version descriptor.
Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/ata/libata-scsi.c | 19 ++++++++++---------
include/linux/ata.h | 5 +++++
2 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 43403aa..96abd42 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2082,14 +2082,14 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
0x00,
0xA0, /* SAM-5 (no version claimed) */
- 0x04,
- 0xC0, /* SBC-3 (no version claimed) */
+ 0x06,
+ 0x00, /* SBC-4 (no version claimed) */
- 0x04,
- 0x60, /* SPC-4 (no version claimed) */
+ 0x05,
+ 0xC0, /* SPC-5 (no version claimed) */
0x60,
- 0x20, /* ZBC (no version claimed) */
+ 0x24, /* ZBC r05 */
};
u8 hdr[] = {
@@ -2109,10 +2109,8 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
(args->dev->link->ap->pflags & ATA_PFLAG_EXTERNAL))
hdr[1] |= (1 << 7);
- if (args->dev->class == ATA_DEV_ZAC) {
+ if (args->dev->class == ATA_DEV_ZAC)
hdr[0] = TYPE_ZBC;
- hdr[2] = 0x6; /* ZBC is defined in SPC-4 */
- }
memcpy(rbuf, hdr, sizeof(hdr));
memcpy(&rbuf[8], "ATA ", 8);
@@ -2126,7 +2124,7 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
if (rbuf[32] == 0 || rbuf[32] == ' ')
memcpy(&rbuf[32], "n/a ", 4);
- if (args->dev->class == ATA_DEV_ZAC)
+ if (ata_id_zoned_cap(args->id) || args->dev->class == ATA_DEV_ZAC)
memcpy(rbuf + 58, versions_zbc, sizeof(versions_zbc));
else
memcpy(rbuf + 58, versions, sizeof(versions));
@@ -2322,12 +2320,15 @@ static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)
{
int form_factor = ata_id_form_factor(args->id);
int media_rotation_rate = ata_id_rotation_rate(args->id);
+ u8 zoned = ata_id_zoned_cap(args->id);
rbuf[1] = 0xb1;
rbuf[3] = 0x3c;
rbuf[4] = media_rotation_rate >> 8;
rbuf[5] = media_rotation_rate;
rbuf[7] = form_factor;
+ if (zoned)
+ rbuf[8] = (zoned << 4);
return 0;
}
diff --git a/include/linux/ata.h b/include/linux/ata.h
index e627032..ac1cb93 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -935,6 +935,11 @@ static inline bool ata_id_is_ssd(const u16 *id)
return id[ATA_ID_ROT_SPEED] == 0x01;
}
+static inline u8 ata_id_zoned_cap(const u16 *id)
+{
+ return (id[ATA_ID_ADDITIONAL_SUPP] & 0x3);
+}
+
static inline bool ata_id_pio_need_iordy(const u16 *id, const u8 pio)
{
/* CF spec. r4.1 Table 22 says no IORDY on PIO5 and PIO6. */
--
1.8.5.6
next prev parent reply other threads:[~2016-04-25 10:45 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-25 10:45 [PATCHv3 00/14] libata: ZAC support Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 01/14] libata: do not attempt to retrieve sense code twice Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 02/14] libsas: enable FPDMA SEND/RECEIVE Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 03/14] libata/libsas: Define ATA_CMD_NCQ_NON_DATA Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 04/14] libata: Separate out ata_dev_config_ncq_send_recv() Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 05/14] libata: Add command definitions for NCQ Encapsulation for READ LOG DMA EXT Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 06/14] libata: Check log page directory before accessing pages Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 07/14] libata-trace: decode subcommands Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 08/14] libata-scsi: Generate sense code for disabled devices Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 09/14] libata: fixup ZAC device disabling Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 10/14] libata: implement ZBC IN translation Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 11/14] libata: Implement ZBC OUT translation Hannes Reinecke
2016-04-25 10:45 ` [PATCHv3 12/14] libata: NCQ encapsulation for ZAC MANAGEMENT OUT Hannes Reinecke
2016-05-13 8:32 ` Damien Le Moal
2016-05-13 8:53 ` Hannes Reinecke
2016-04-25 10:45 ` Hannes Reinecke [this message]
2016-04-25 12:17 ` [PATCHv3 13/14] libata: support device-managed ZAC devices Sergei Shtylyov
2016-04-25 10:45 ` [PATCHv3 14/14] libata: support host-aware and host-managed " Hannes Reinecke
2016-04-25 20:16 ` [PATCHv3 00/14] libata: ZAC support Tejun Heo
2016-05-06 11:05 ` Hannes Reinecke
2016-05-09 16:38 ` Tejun Heo
2016-04-26 0:42 ` Damien Le Moal
2016-04-26 5:47 ` Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461581156-92581-14-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=damien.lemoal@hgst.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=shaun.tancheff@seagate.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).