From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bartosz Golaszewski Subject: [PATCH v2 04/14] sata: ahci-da850: get the sata clock using a connector id Date: Tue, 17 Jan 2017 13:26:06 +0100 Message-ID: <1484655976-25382-5-git-send-email-bgolaszewski@baylibre.com> References: <1484655976-25382-1-git-send-email-bgolaszewski@baylibre.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1484655976-25382-1-git-send-email-bgolaszewski@baylibre.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Kevin Hilman , Sekhar Nori , Patrick Titiano , Michael Turquette , Tejun Heo , Rob Herring , Mark Rutland , Russell King , David Lechner Cc: linux-ide@vger.kernel.org, Bartosz Golaszewski , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org List-Id: linux-ide@vger.kernel.org In preparation for using two clocks in the driver (the sysclk2-based clock and the external REFCLK), check if we got a functional clock after calling ahci_platform_get_resources(). If not, retry calling get_clk() with con_id specified. Signed-off-by: Bartosz Golaszewski --- drivers/ata/ahci_da850.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c index 267a3d3..18f57c2 100644 --- a/drivers/ata/ahci_da850.c +++ b/drivers/ata/ahci_da850.c @@ -71,12 +71,28 @@ static int ahci_da850_probe(struct platform_device *pdev) struct ahci_host_priv *hpriv; struct resource *res; void __iomem *pwrdn_reg; + struct clk *clk; int rc; hpriv = ahci_platform_get_resources(pdev); if (IS_ERR(hpriv)) return PTR_ERR(hpriv); + /* + * Internally ahci_platform_get_resources() calls clk_get(dev, NULL) + * when trying to obtain the first clock. This SATA controller uses + * two clocks for which we specify two connector ids. If we don't + * have a clock at this point - call clk_get() again with + * con_id = "sata". + */ + if (!hpriv->clks[0]) { + clk = clk_get(dev, "sata"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + hpriv->clks[0] = clk; + } + rc = ahci_platform_enable_resources(hpriv); if (rc) return rc; -- 2.9.3